Sound not working after i connected wrong cable. "Accessory not supported"

I connected a Creative Zen cable by mistake (looks just like the iphone cable, and for some strange reason fitted also). Obviously i got an message on the phone telling me that this accessory was not made for iphone.
I disconnected the cable, but the phone keeps giving me this message! Even if i turn the phone on/off it keeps telling me that the accessory (which is not connected) is not made for iPhone. And there's no sound in the speaker other than when i receive calls/alarm.
Does anyone know how to fix this problem?
I've already tried connecting headphones (works), and then disconnecting them again, but sound is not coming through speaker after i disconnect them.

Check for debris in the dock connector port; it's also possible that you physically damaged the docking connector on the iPhone.
Have you tried resetting or restoring your iPhone? Reset first -tto reset the iPhone, press and hold the home and sleep/wake buttons until you see the Apple logo (ignore the slide to power off prompt).

Similar Messages

  • TS3367 Hi, the FaceTime just did not work between my mom and I. It used to work weeks ago, but now it does not work after showing"connecting". I feel frustrated and try all the method I can think of. Still do not work. Hope u can help me. Thanks!

    Hi, the FaceTime just did not work between my mom and I. It used to work weeks ago, but now it does not work after showing"connecting". I feel frustrated and try all the method I can think of. Still do not work. Hope u can help me. Thanks!

    Was it just this one time?  Could be that you, or your mom, were experiencing network problems.  Try again at a later time.

  • Internet not working and printer connected by cable but it is unable to communicate with the compute

    Changed print cartridge and then problem started.
    Internet not working and printer connected by cable but it is unable to communicate with the computer

    Hi Joanna 59
    Sorry to hear that you are having this issue and Hope you are well; 
    1.Do you see any light on the back on the printer where the cable is connected? 
    2. Do you see lights on the back of the router where the cable that comes from the printer is connected? 
    3.What type of cable are using to connect the printer? Have you try another cable to see if the problem is the current cable.
    Please kindly include;
    What router are you using (Brand and model)
    Operating system i.e. Win 7 
    Complete Printer model
    Thanks;
    RobertoR
    You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

  • No sound from tv after laptop connected (G60)

    Hi
    It is no sound from TV, after i connecting my laptop to tv through hdmi cable on hdmi port 1.
    However, the image looks ok.
    I open the sound control panel, see NIVDIA HDMI OUTPUT SEEMS WORKING, (SET DEFAULT), BUT THE VOLUME IS VERY LOW, AND NO TEST SOUND COMING OUT FROM TV EITHER.
    I tried to set up the audio system in NIVDIA control panle under VIDEO AND TV as instruction in HELP of NIVDIA help manual. But i just cannot find the audio system set up.
    anyone can help on this,
    Very appreciated!
    Tnx
    My email is
    [text removed for privacy]

    Try this, it works on my PC:
    Connect HDMI cable to TV. 
    In the Control Panel, select "Sound" by double-clicking it.
    Click the "Playback" tab and look for an icon for your television.
    Highlight the TV icon and then select "Set Default".  A green checkmark should appear on the TV icon.
    You should now hear sound from the TV when your HDMI cable is connected, and sound from your PC when the cable is not connected.
    Marty
    dm4t  i5-430M  4GB-RAM  IntelGraphics

  • My sound stopped working after installing Java

    my sound stopped working after installing Java

    Make sure Must is not selected in System Preferences > Sound
    Might be corrupted sound preferences ...
    Open the Finder.
    From the Finder menu bar click Go > Go to Folder
    Type or copy/paste:   /Library/Preferences
    Click Go then move the com.apple.soundpref.plist file from the Preferences folder to the Trash.

  • KM2M + WIN XP sound stops working after a few minutes

    as in subject i have a KM2M COMBO-L (MS 6738) MoBo with athlon xp 2000+ and 128 MB spectek PC2100.
    The problem is that the sound stops working after some minutes of use.
    It's the same problem in all the 10 PCs of my webcafe

    KM2M uses the Realtek ALC650 CODEC.  Are you using the VIA Audio driver or Realtek?  It should say under audio properties.
    I recommend the Realtek drivers.
    Of course, if you are already using the Realtek, then I recommend the VIA drivers.
    Pretty insightful, eh?    

  • Why do the apps on my iphone not work after i connect it to my iMac?

    Why do the apps on my Iphone stop working everytime I connect it to my IMac?

    There are a few things you can try.  The first is to simply reset the Shuffle as it may be the cause of the issue.
    Resetting iPod shuffle
    Otherwise, also make sure that the earbuds are plugged all the way in and that the white part of the headset is flush with the body of the Shuffle.
    If possible, use another set of earbuds to see if they work okay. If they do, we know its the headset that is the problem and from there you'll need to take the necessary steps to replace them.
    B-rock

  • Iphone sound stopped working after ios 6.0 update

    My 4s was working fine until I updated to 6.0.  After that, my sound stopped working.  If I plug in headphones it works, but as soon as I unplug it stops.  When I plug into my USB sync cable it works, but when I unplug it stops working. I updated through user settings over wifi and not through itunes sync if that makes any difference.  I know other people are experiencing similar problems.  Any help would be appreciated.

    Yes rev, I tried the dock cleaning as well, I didn't help me either. I read and tried everything others did-no luck. I'm guessing these are the facts, either it will quietly get fixed on an update or the % of phones with the problem compared to those that don't doesn't warrant attention and is better addressed through Apple by just replacing it..if it's still under warranty.

  • Iphone 4S sound issue - sound stops working after a few minutes

    The sound on my iphone 4S stops working after a couple of minutes, including both the headphones and the loudspeaker. If I unplug the headphones and replug them in, the sound starts to work again, but only for a few minutes until it conks out again. How can I fix this problem?

    Any problem when connected to another wi-fi network besides your own?
    The only additonal troubleshooting options after powering the iPhone off and on, an iPhone reset, and resetting network settings on the iPhone is restoring the iPhone with iTunes from the iPhone's backup and/or restoring with iTunes as a new iPhone or not from the backup.
    If no change after restoring as a new iPhone or not from the backup - the same when connected to any wi-fi network besides your own as well as not being able to maintain internet access when connected to your carrier's cellular network, the iPhone has a hardware problem.

  • Creative inspire 7900 still doesn't work after buying a new cable

    so everyone told me to get the 3.5mm mini jack cable, because i only had the 3-4 cable. So i connected the 3.5mm, but still i get no sound from the side or rear speakers when i test the surround with realtek HD audio manager, only the front speakers works.

    Hey Amigo, I had the same problem and here is the fix I found that works on my 7800 speakers. I believe it should work on yours since the cables are the same. First, unplug the four to three wire connectors from the back of the card and speaker amp. Then run the extra 3.5mm plug from the "black" on the back of your card to "rear speakers" on the back of your amp. (make sure your 3.5 connector is a stereo one and not phono or mono. It'll have two black rings around the male end) Then, reverse your 4/3 plug. For this to work with the existing plug you must do this. The end with the four plugs you will now connect to the back of your sound card instead of the other way around. Hook the green to green, orange to orange and the black plug to the grey on your card. Do not use the grey plug, just let it hang. Then on the back of your speaker box hook the orange to orange (center/ subwoofer), green to green (front) and the black plug to grey (side). Then on the creative control panel go to the THX setting and select your speakers to 7.1. From there you can click on each individual speaker and test them. They should work great and you are set to go. Just for info I am running the X-fi Titanium Pro and Inspire 7800 speakers. From what I see the connections are the same as the 7900's. Good luck and enjoy the great sounds!
    Message Edited by tbratz on 08-07-2008 06:42 PM

  • Remote Desktop sound stops working after a while.

    Has anyone a solution to this problem of the sound just dropping out of a RDP connection after a day or two?
    Win Server2008 (32 bit) running as a Terminal Server.
    WIN 7 Clients (32 bit)
    Sound is absolutely critical on the program being ran on the WIN7 clients when connecting via RDP to the Server 24/7.
    But the sound just stops working on the RDP clients after a day or two.
    If I minimize the RDP session and try the sound from the native windows session it works, but sound is not working within the RDP session.
    and it takes a restart of the RDP session to restore sound, but then aftera day or two I get a call to say the sound is no longer working- a restart of the RDP sessions restores the sound.
    I have checked the Environment sound settings in the RDP setup on the clients and have them set to play on the client, and I have checked that sound is not disabled in the Terminal Server end of things for RDP sessions.
    I would really appreciate to help with this if anyone has suggestions.

    OK after updating the Server and clients I am still having this issue :( 
    and just today after no sound problems for 6 days the sound dropped out on a couple of RDP sessions, yet the sound on the client itself worked fine when tested (minimise the RDP session).
    It took the RDP sessions to be restarted to restore the sound within the session.
    I have found similar (old) thread regarding this problem:
    https://social.technet.microsoft.com/Forums/windowsserver/en-US/958fd891-6f55-432b-8268-a326ac6b2b2e/sound-in-remote-desktop-session-stops-working
    but no one has informed about if as solution was ever found.

  • Itunes sound stops working after 20 mins on videos bought from iTunes store.

    On every video i've bought from the iTunes store the sound cuts out after approx 20 mins. I'm on windows 8.0 (completely up-to-date with all drivers up-to-date too) with the latest iTunes (11.1.3.8) and Quicktime (with enhancements switched off). PC is a quad core i7 with 16GB of memory with windows running on an SSD and my iTunes content on another internal HD (not an SSD). iTunes library is approx 24000 songs and 30 videos. i'm watching on a full HD monitor with external speakers and the PC is authorised to play iTunes content.
    I've worked my way through all the iTunes support items around video chopping (which was happening too - now fixed) and audio issues but nothing helps e.g. I've switched off iTunes match and home sharing, switched off any audio enhancements in iTunes and my sound card (which is a Via chipset on my motherboard), switched the bit rate to 16 bit/44.1k on windows and itunes, uninstalled and re-installed iTunes etc, etc.
    I did have an Apple TV on my network but I've disconnected it in case the sound was being routed to it after a period of time. This hasn't made any difference.
    Has anyone had this issue and managed to fix it?
    Thanks

    Myself as well, have been having this same problem, around 20 minutes into any movie I open up in my itunes library, the sound stops playing.   I have yet to find any fix for the problem, although I have a thought that it is probably something to do with the buffering.  My songs play just fine, all day long, but any movie only plays for 20 minutes and then the sound goes out.   Additionally, I had another issue that kept popping up an error message everytime I tried to open Itunes, this was finally fixed via copy paste a corruptted (spelling) .dll file.  The only "workaround" for this issue, that I have found, is to open the movie in QuickTime, even though I am not really excited about the QuickTime player.  If anyone finds a better solution, please drop a line. thank you in advance.

  • Pavilion g6 sound stops working after a while

    Over the past week the sound in my laptop has begun to stop working after a while of the laptop being on. It works initially but after a while when I check it doesn't work anymore. The mute button does not mute work, the volume increse and decreases on the screen but it does not affect the absense of sound. Please Help. 
    System Details: HP Pavilion g6, Windows 8

    HI. I'm having the same problem. This has been happening for some time now. I can play anything with sound and then it suddenly goes and I can't use the mute/on/off or work out what's happening. Is it a fault? 

  • Dell Inspiron 7537 - Sound only works after resuming from suspend

    Hello,
    So my sound does not work after boot, only once I resume from suspend. So, once I turn on my computer, and I load sound, nothing work (everything is unmuted in Alsa) - then if I suspend my computer and resume - the sound works every time.
    I use Alsa and here is my amixer output (before and after suspend is the same) :
    eric@archlinux ~> amixer
    Simple mixer control 'Master',0
    Capabilities: pvolume pswitch pswitch-joined
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 65536
    Mono:
    Front Left: Playback 5358 [8%] [off]
    Front Right: Playback 5358 [8%] [off]
    Simple mixer control 'Capture',0
    Capabilities: cvolume cswitch cswitch-joined
    Capture channels: Front Left - Front Right
    Limits: Capture 0 - 65536
    Front Left: Capture 11003 [17%] [on]
    Front Right: Capture 11003 [17%] [on]
    What gets rebooted when I do a suspend, but not when I reboot? Does not seem to make sense to me.
    Thanks.

    Is there any additional information I can include to help figure this out?

  • IPod doesn't work after mac connection

    i don't know why my mini ipod doesn't work anymore (it doesn't read the songs!) after i connected it with an imac g3. i started my ipod with a pc... and transfered a program for mac with it... then i connected it with the mac and now it doesn't read the mp3... suggestions?

    Try to do a Reset and a Restore, bear in mind please make sure that you have all the music with your iTunes on your computer, as doing a Restore will erase all the data in your iPod

Maybe you are looking for