Sound not working after standby (Gnome)

I am using gnome. Whenever I standby and return, my sound is not working. What file should I edit and what should I put?

Loafers wrote:
ngoonee wrote:I suggest you search the wiki. You're telling me hardware when I asked for the sound system. Alsa, OSSv4, pulseaudio, phonon? Go search the wiki.
im using alsa
Good. Now re-read the instructions in my post.

Similar Messages

Sound not working after checking for driver updates and resetting bios

I am running a (HP Pavilion dv7-6c60us Entertainment Notebook PC)
I had muted the sound and did a system upgrad prompted by my HP assistant after logging on. Now when I try to get sound nothing happens. So I went out to the support site and checked for driver updates and none were found. So I then went into my system bios and reset it as stated in a support for sound not working and still no sound. HOW DO I GET MY SOUND TO WORK AGAIN?

From your models support page Download & Save the latest Audio driver.Go into Control Panel,Programs & Features- Uninstall IDT software.Restart the laptop. After Windows loads, install IDT audio using the downloaded file.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=5218...
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Sound not working after installing ios6

Sound not working. After double clicking bar at bottom has the line for sound but button to slide is mssing

Uninstalled IDT software from programs, removed/rolledback the drivers, downloaded the HP Support Assistant and it recommended an IDT software, installed that via HP Support Assistant. Everything is working fine now.

Sound not working after resuming on maverik

Sound stops working after resuming my Mbp. Reseting PRam solves this issue but its tempory. I have to restart my system everytime this issue occurs.
I have one more issue regarding sound, which might be just another bug.
When I plug my headphone, sound doesnt switch to head phone and I cant switch manually too from system preferences. To fix this issue, I have to close the lid and wait for a while for system to sleep and resume system. after resuming, Os starts detecting my headphone. strange!

For those of you reading this just thought that I would update you. After spending 90 minutes on the phone and resetting/restoring the phone twice, with two different level of tech support they have deemed this a hardware issue now. This phone worked perfectly fine before the ios 6.1.2 update that was done yesterday. Worked fine, played music, took calls, did all the sounds, then updated and now nothing!
Our family has 4 iphones, several ipods and 2 ipads. I am now left with a phone just out of warranty (by 2 mo) and no choice but to pay the $200 to apple to get another phone. Apparently this is a steal because a new 4s costs $600.! lol. I am greatly disappointed. I have been given the corporate phone number and assured that there would be someone in customer service to talk to, but there was not, no surprise to me. Anyone else have any suggestions?

Sound not working after some time

I am using pavilion g6 laptop. Nowadays my laptop sound stops working after some time of use. I checked the drivers but everything seems to be ok. Please help what to do??

Hi sushovanee,
Welcome to the HP Forums!
I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I grasp you have a G6 notebook and after a period of time you lose the sound.
Have you done all your Windows updates?
Have you ran The HP Support Assistant to aid with this difficulty.
Has there been any recent changes to your system?
To assist you I will need some more information.
What exact model of G6 do you have?
How Do I Find My Model Number or Product Number
What Operating system are you running?
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

X301 Vista FN Keys Sound Keys not working after standby or hibernation

After the Laptop is waking up from standby mode or hibernation mode some FN Keys, such as Display brightness, F3, F12 are not working. F4 is working. Also the Keybord light is working.
The Sound Keys sometimes work, sometimes not.
Any ideas?

I found in the device manager out that there was a problem with the "Thinkpad PM device". I deinstalled it and restarted the Laptop then it was installed automatically again.
Now most of the time it works, still not always. It looks like Lenovo needs to do some work on the driver.

X240 fingerprint reader does not work after standby or lockscreen

Hello all,
I have a new X240, and the fingerprint logon no longer works after the computer resumes from standby or from a lockscreen (screen saver). I have checked other solutions here and in other sites, namely:
1. unchecking the power option of the fp reader in device manager,
2. and switching the 30-day standby in Lenovo Settings
Neither of those solutions have worked. I have the latest BIOS and FP driver versions. I made sure the the FP was enabled in BIOS, and I even switched the settings to allow internal FP reader only. Still, the FP will only work when I first power on the laptop, but not after resuming from stand-by. I have checked in Device Manager after manually entering the password, and it says that the FP is working properly.
I am at a loss, and I want to exhaust every possibility before I call tech suppport. Any suggestions would be appreciated.
X230
x200
T410
X240
TP Tablet 2
Solved!
Go to Solution.

Fixed.
I normally use System Update to check for newer versions of Lenovo software. SU didn't catch that there was a new version of FP reader. Just to be sure, I doublechecked on Lenovo's website, and lo and behold, there was a newer version of the FP reader. I had to download it and manually uninstall the previous version. It's fine now. However, I don't understand why Lenovo does this - why does SU not catch updates? It's not the first time that this happens, by the way, nor is it limited to this laptop (I own or have owned a T60, X61, X200, X201, X230, T410, and now the X240).
In any event, the FP is working properly now. I hope this helps someone else.
X230
x200
T410
X240
TP Tablet 2

HP Pavilion DV5000 : Conexant Audio HD sound not working after upgrade XP to Windows 7

On HP support site there are no drivers for Windows 7 for Conexant Audio HD soundcard in HP Pavilion DV5000.
Have tried installing Vista drivers in stead, does not work.
Have tried renaming unzipped Vista files to camcaud.sys & camchal.sys and copied them into Windows/System32/Drivers and reboot, does not work.This is the only solution I found after reading forums for several hours, but does not work.
Would very much appreciate help.
Thanks.
This question was solved.
View Solution.

My solution is here (registry editing required):
Conexant audio (vendor 14F1, device 5047) – no sound on Windows 7 – solved

Satellite M100 sound not working after installing Windows 7

Everything else is working after this upgrade except the sound. Have tried everything. Any suggestions?
Many Thanks.
Rory

Hi,
For me the case is clear: Windows 7 is not the market as yet and its not released as yet. So I think this is the problem.
Anyway, have you tried to install the driver from the Toshiba website? There you can also find the Synaptics driver. Its for Vista but normally the drivers for Vista are also work in Windows 7. Its worth a try.
http://www.csd.toshiba.com
Have you tried the key combination FN+F9? So you can enable and disable the touchpad but I doubt that this works. Normally you need the Toshiba utility for this
Greets

Sound not working after update on 4s

Completed most recent software update now no sound is working, either in or out.

For those of you reading this just thought that I would update you. After spending 90 minutes on the phone and resetting/restoring the phone twice, with two different level of tech support they have deemed this a hardware issue now. This phone worked perfectly fine before the ios 6.1.2 update that was done yesterday. Worked fine, played music, took calls, did all the sounds, then updated and now nothing!
Our family has 4 iphones, several ipods and 2 ipads. I am now left with a phone just out of warranty (by 2 mo) and no choice but to pay the $200 to apple to get another phone. Apparently this is a steal because a new 4s costs $600.! lol. I am greatly disappointed. I have been given the corporate phone number and assured that there would be someone in customer service to talk to, but there was not, no surprise to me. Anyone else have any suggestions?

Sound not working after 10.9.4 Mavericks Update - HELP!

My sound does not seem to be working following the latest update to Mavericks (10.9.4). I am running a 2012 Retina Macbook Pro. Sound does not work with speakers, headphones or built-in sounds. Before anyone asks, no its not on mute, I have checked the Audio Midi setup and Sound settings and everything is as they were prior to the update, so the sound should still be working.
I have tried resetting the SMC and PRAM, no luck yet. Also tried re-installing the update but did not work.
Any help is greatly appreciated!

So I had the same problem; Actually other problems occurred after upgrade 10.9.2 (Thunderbolt related issues) and now after upgrading to 10.9.4 my internal sound disappeared.
The solutions described above made it worse; Sorry sykosoft .. but your solutions is even dangerous ;
I spend almost a Day finding out how to restore my internal audio devices ..
So what I discovered, this is a software issue;
Update on update on update without any clean install resulted in some filty .plist files
com.apple.audio.DevicesSettings.plist
com.apple.audio.SystemSettings.plist
looking in those files I discovered some settings pointing towards RabbitEars .. perhaps I tried it once in a previous life but now I do believe the upgrade took by incident the wrong 'device' as standard ..
So I looked up and the only thing I could do was finding .kext and other related stuff .. only able to remove it commando wise = terminal
after rebooting for the 722th time performing a SMC and PRAM for the 666th time the result was ... NO STANDARD devices detected
THe only solution working is :
A recovery install;
https://www.apple.com/osx/recovery/
In my case I encountered a problem; My recovery failed (reboot press and hold CMD+R, selecting install fresh OS X)
I find out it was due to my FileVault encrypted HD; So first I uncrypted (switched off FileVault) my HD, and even created a USB recovery disk (not needed)
Tadaaaa 45 minutes later all problems solved, without loosing data or reinstalling all programs ..
*feeling relieved* I thought sharing my pain and solution would save you hours finding out how to repair, hoping PRAM and SMC reset would solve it ..

Sound not working after booting

First of all, I have tried to uninstall and then install again the drivers of the sound card for W8.1
The sound does not work if I have switched off my laptop and then boot it. If I reboot it, the sound works. It's just when I have switched off it from Windows (maybe because W8 does not a complete switch off but a kind of hibernation).
In the audio mixer of the tray the green bar which shows when it's playing sound works like it's working and if I plug some headphones on the jack port they work like a charm,
Any idea of what's happening? I've just bought this laptop last week and I'm very happy with it apart from this thing

From your models support page Download & Save the latest Audio driver.Go into Control Panel,Programs & Features- Uninstall IDT software.Restart the laptop. After Windows loads, install IDT audio using the downloaded file.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=5218...
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Sound not working after reinstall

I have a Toshiba Tecra A8514 and I had to re-install my windows XP and since then my audio is not working, I have tried to install the audio driver on the site but that didnt work, any help on the matter would be great.

So you installed this driver without success.
Realtek HD Audio Driver for Windows XP
My guess is that you did not install in the correct order. You might want to start over. It's important to install the chipset software followed by the display driver before any other driver.
--------------------8<------------------- <snip> ------------------
Install them in this order. Restart after each driver and take the time to test between drivers. Some will apply and some won't.
Chipset software
Display driver
Sound driver
Modem Driver
If your machine has the internal WiFi card, then install the WLAN driver
ACPI Common Modules
Toshiba Console
Display Hotkey utility
Touchpad Driver
Toshiba Power Saver Utility
Toshiba Controls
Toshiba Utilities
--------------------8<------------------- <snip> ------------------
I would restore the hard drive myself. All this stuff is correctly preinstalled. Replacement media can be ordered by calling Toshiba Customer Service at 800-457-7777. Have the computer's serial number and a credit card handy.
-Jerry

T40 sound not working after motherboard replaced....bad sound card?

Hello,
I recently brought back to life my old t40 2373-75U by switching out the motherboard (it would no longer charge batteries) with a used R51 1830 motherboard (which I believe was a recommended upgrade by someone on this site).
Anyways, long story short - I have the gently used motherboard now installed and the machine is up and running with my old T40 hard drive. I also have XP-SP3 installed on it, and just had to make a few minor driver updates...everything seems to be working great, EXCEPT I have no sound.
I have tried everything I can think of:
Software:
-un-installing and re-installing the audio driver several times
-installing the 2004 version of the hotkey driver (the 2013 version did not work with my system) because the Access IBM and volume buttons were not working and I thought that might be the culprit
-I believe I updated the BIOS drivers, but not sure if I "flashed" it...admittedly, I don't even know how to do that.
Hardware:
-the hardware in device manager shows that it's working properly
-I've performed the "test hardware" function through the control panel/device manager and it shows a signal with my USB "test" microphone going in and a signal coming out, but still no sound is actually coming out
-lastly, I've tried connecting external speakers to the headphones jack and still nothing..
At this point, all I can think is that the sound card is bad.
Would you agree with this assessment or am I forgetting something?
Thanks for your help.
Solved!
Go to Solution.

I'm not familiar with Linux Mint as I have been a Fedora guy for a long time, but since LM7 was
released in 2009, all audio drivers should be present for your machine. But, as I said, that could
be different for LM.
But you shouldn't have to do anything further regarding codecs or anything else, and since the Soundmax
uninstallation also removed the device as well, then it should be completely reset in the OS. Alas, is there
anything from Via in Control Panel - Add/Remove programs? If so, you should remove that before proceeding.
The driver for your machine is here:
Audio driver for Windows XP
And if you already installed this version, the driver can be found @ C:\DRIVERS\WIN\AUDIO
I did some rummaging through various forums today in regards to your issue, and found this one,
a couple of R51 users chime in there too.
http://forums.windrivers.com/printthread.php?t=73987&pp=40
and in the above link, a user found a solution by following the advise in this post:
http://www.techspot.com/community/topics/audio-drivers-not-found.14328/#post-184512
But instead of getting the drivers mentioned there, you could point to the installation location I
posted above.
One thing they mention in these threads, is running
sfc /scannow
in a command prompt, which checks your OS for essential system files, but for XP you'll
almost certainly need the Windows XP installation media.
Finally, here is another thread on audio issues for a R51 user:
http://www.techsupportforum.com/forums/f19/solved-ibm-r51-no-sound-512806.html
Sorry for a bit muddled reply, but there you go... something to sink your teeth in at least.
ThinkPad W540 (20BG) - i7-4800MQ/24GB // ThinkPad T440s (20AQ) - i7-4600U/12GB
ThinkPad T440p (20AW) - i7-4800MQ/16GB // ThinkPad Helix (3698-6EU) - i5-3337U/4GB
ThinkPad W520 (4282-W4Q) - i7-2720QM/32GB // ThinkPad T400 (2767-W1C) - P9500/8GB
ThinkPad T61 (7665-CTO) - T7700/4GB // ThinkPad T60p (8741-C2G) - T7400/4GB

Sound not working after i install ios 6

I have a major problem with the sound after I install the latest ios 6 from apple.First few hours works ok, but after the sounds disappear.I try all the applications that's use sounds ( music, video,sounds of phone etc.) but with no luck.After I rechearg it at dock station he works but just for 2-3 hours.I try to reset the phone, to backup twice, but nothing.
Maybe Apple experts read all the feedbacks of the new ios 6 and they do a quick update, because in my oppinion this is shameful for the brand to release a ios with some many issues.

I believe I have the same issue. In my experience, the sound stops working from mulitple applications including audible audiobooks, music, and even the nightstand alarm app. It affects sound coming from speakers and sound over bluetooth speakers. The only resolution I have found is to power off and power back on again. After I do this the sound seems to work for a few days.

Sound not working after standby (Gnome)

Similar Messages

Maybe you are looking for