Sound not working macbook pro

I am unable to controll the speakers on my Macbook Pro 13" Mid 2012. But when i have headphones in my sound is fine.
When i try to controll the volume on my keyboard there's just a "/" over the sound icon
Any help appreciated

Hopefully one of these steps should solve the problem.
System Preference > Sound > Output > Internal Speakers
Make sure Mute is not enabled.
Remove the headphone.
If you see red light in the headphone port, plug the headphone
in and out of the port 5 or 6 times to flip the microswitch inside.
Sound output may be stuck in the digital mode.
Reset PRAM.  http://support.apple.com/kb/PH4405
Reset SMC.     http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best.

Similar Messages

  • Sound not working macbook pro - intermittent

    Yesterday, the sound on my computer was not working. Volume was turned all the way up on computer and iTunes. I restarted and the boot up sound was very quiet. Once, I logged in, I turned the sound up and the sound worked fine. Today, the same thing happened - no sound. I haven't tried restarting yet because I now believe it's a more serious problem. Any help?

    One more interesting quirk to this problem. I still get the sound indicating I've gotten e-mail or the swoosh sound when sending an email. I also get the sound of IMs coming in through Adium. I tried other videos on the web (other than iTunes) and they also don't have sound.

  • Microphone and Line In Suddenly Not Working Macbook Pro 15" Early 2011

    Yesterday without warning, my internal mic stopped working on my Macbook Pro 15" Early 2011. I discovered this when the recipient of a Skype call couldn't hear me, and verified that the mic was not getting any level in the Sound system preferences pane. There is also no microphone input happening when I plug in my iPhone headset to the headphones jack. The audio out seems to be fine. I had to use a USB microphone to get any sound into the computer. I used the microphone just a few days ago without any issue.
    I've already tried:
    Rebooting
    Resetting PRAM
    Creating second account to test audio
    And none of the above had any affect. Other note: I recently had the GPU of this computer replaced under Apple's special replacement plan. Anything else I should try before making an appointment to have the hardware looked at?

    pushyourmind,
    If you’re up-to-date with Software Update, then you have the correct firmware installed. If you’re running 32-bit Windows 7, then Boot Camp Support Software 4.0.4033 contains the correct drivers; if you’re running 64-bit Windows 7, then Boot Camp Support Software 5.1.5621 contains the correct drivers. Which ever support software corresponds to your version of Windows 7, try downloading the corresponding .zip archive and following the installation instructions on the corresponding link above when booted in Windows.
    Boot Camp 5.1 supports Windows 8.1 on your model MacBook Pro if you’re running OS X 10.8.3 or newer. Earlier versions of Boot Camp and older versions of OS X don’t support Windows 8.1 in Boot Camp on your model MacBook Pro.

  • Speakers not working - Macbook Pro

    Hi,
    Am facing this issue from today, that speakers on Macbook Pro are not working, when am MAC OS. When I boot into Windows 7 (Bootcamp), the speakers seems to be working.
    I have checked the mute key, to ensure the MAC is not on mute mode.
    How can I debug this issue?

    Resetting Mac's PRAM and NVRAM did not helped.
    Then I checked Sound settings in System Preferences and in Ouput Tab, the value selected for Sound Output was Apple TV. Probably it got changed when I was streaming the conten yest. using Apple TV.
    I changed it back to Internal Speakers and and got the sound back on speakers.
    Thanks for all your assistance.

  • HDMI output not working MACBOOK Pro (Oct 2014)

    I am trying to get another screen connected to my MBP, I have tried numerous screens and cables to achieve this, but I can not get it to work.
    Is there a on/off or disable HDMI output on the MBP?
    I have used various screen, which i know work. And a HDMI to DVI and HDMI to HDMI cables to screens . I know the cable and screens work as I use them at work on a daily basis.
    All I get is "No signal connected".
    Is there any diagnostics or tests I can do?
    Regards,
    Rowland

    I have a 13" MacBook Pro.

  • Flashing Question mark: New hard drive not working Macbook Pro late 2008

    After following several peoples advice on this forum I decided to upgrade my Macbook Pro late 2008 with a Seagate (1TB) Solid State Hybrid Drive 2.5 inch.
    Heres the device.
    http://www.morecomputers.com/spec.aspx?pn=ST1000LM014
    After creating a mountable boot on a External hard drive with Mavericks install I removed the current hard drive and replaced with the new seagate drive. However it didn't seem to recognize the external hard drive (it is quite old but works perfectly) and went to a flashing grey question mark screen and wouldnt do anything else. Ive tried holding down command-r and option-r but I get nothing. Its just the same flashing question mark. I have done this several times and the same result.
    I put the old drive back in and it works fine.
    I am trying to work out is the problem with the mountable external hard drive OR is it the hard drive is not compatible with my computer?
    Appreciate your help
    Gary

    Sorry I think you may be confused.
    I am trying to install the new Seagate hard drive to my mac (not as an external hard drive).
    I replace the macbook pro hard drive with the seagate drive:
    http://www.morecomputers.com/spec.aspx?pn=ST1000LM014
    I then started up the machine with a usb external hard drive with a boot copy of mavericks on it. However, it just displayed a flashing question mark and wouldnt start booting the osx.
    I am trying to work out is the problem with the mountable external hard drive OR is it the hard drive is not compatible with my computer? Im guessing it must be hard drive. Would it be better to use a USB pen drive as the external hard drive is quite old?
    Does anyone know what the problem could be as the hard drive is brand new.
    Appreciate your help
    Thanks, Gary

  • Audio not working MacBook Pro 15''

    My internal speakers are not working and seem not to be recognized by the OS. I am running Lion. Under Preferences>Audio there isn't any option for the internal speakers. Headphones are still working.

    I had the same problem and after a bit of research discovered that the line in is not getting enough input from an unpowered set of headsets.  ALSO, the mic level was set too low and so nothing was being picked up.
    Solution:
    I have a Thunderbolt Express Dock (expensive I know but very handy) and plugging in through the express dock with the mic level up works great.
    Alternatively, I also have a USB Headset Connector that comes up as a seperate device and also is able to take inputs.
    Finally, if neither of these work, I found that the earth chassis on my Macbook Pro 15" was a bit unpredictable.  I removed the base cover, cleanes the contact points (little silver spring loaded buttons on the edge of the main board) and where the contacted the cover and this also improved things.
    Regards,
    David

  • Bluetooth not working macbook pro 2011, AHT found nothing

    My macbook pro 2011 has been having some issues with bluetooth. The system doesn't even recognize as having bluetooth hardware. I went under the hardware profile and it actually says No information found under bluetooth. I was able to do a full hour diagnostic test using Apple Hardware Test and everything was all clean. I'm not sure if this is Yosemite related or not. I definitely remember using my bluetooth enabled keyboard and mouse on my system before I upgraded to Yosemite. Wifi works fine. I've tried resetting PRAM, but nothing. I'm at a loss, not sure if there is anything else I can do.

    Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. You may have to leave the machine there for several days.
    Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional—ask if you need guidance.
    If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
    Keeping your confidential data secure during hardware repair
    Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
    *An SSD doesn't need to be zeroed.

  • Wifi, Bluetooh and iSight not working MacBook Pro

    I have a mid 2009 MacBook Pro Unibody. 8Gb Ram  Mavericks OS. I powered down one evening, everything normal.  Next day I rebooted it to find that I had lost Wifi, Bluetooth and isight.  Oh, and the fan runs at high speed constantly.
    Ptheise computer is running OK and I can connect to network via ethernet.
    Messages are:
    1. Wifi - no hardware installed
    2. Bluetooth - not available
    3. iSight - there is no connected camera.
    I have rebooted in safe mode, reset NVRAM and SMC, left it off for 30 hours. Tried an AHT. None worked.
    Have checked system information.  Responses are:
    1. WiFi
    Software Versions:
      CoreWLAN:          4.3.2 (432.47)
      CoreWLANKit:          3.3.2 (332.36)
      Menu Extra:          9.3.2 (932.35)
      System Information:          9.0 (900.8)
      IO80211 Family:          6.3 (630.35)
      Diagnostics:          3.0 (300.40)
      AirPort Utility:          6.3.2 (632.3)
    2. Bluetooth
    No information found
    3. Camera
    No video capture devices were found
    I'm presently redownloading Mavericks to do either a reinstall, or clean install, but before I do this can anyone suggest a solution?  Computer back up is up to date.
    NB: I live in Botswana where there are no Genius bars, nearest reliable service is in South Africa and downloads are VERY slow.
    Thanks in advance

    Restarting Mac may fix it.  Otherwise: http://support.apple.com/kb/HT2090
    (Apple has changed the built-in camera's name on newer Macs from "iSight" to "FaceTime" and then to "FaceTime HD."  Regardless of the name of your built-in camera, the same info and troubleshooting applies.)
    Message was edited by: EZ Jim
    Mac OSX 10.8.1/span>

  • Backspace key not working - Macbook Pro using Mavericks

    I've got a Macbook Pro (early 2011 model) which I upgraded to Mavericks earlier this year and all has been working fine. Over the past few days I noticed my backspace key was playing up (sometimes it worked, other times I had to press hard a few times before it would work at all) until today when it decided it would not work at all. I have already checked in System Preferences and restored defaults as well as resetting the PRAM but to no avail so far. Is there anything else I can try or will I need to take it back to the store and get it looked at?

    Since you reset the PRAM, I would take it in for diagnosis.
    Barry

  • Facetime not working MacBook Pro to another MacBook Pro!

    I can use Facetime on my MacBook Pro and call my Iphone. I cannot though, connect Facetime using my MacBook Pro to another MacBook Pro user. When the MacBook Pro user facetimes me, it only shows up on my Iphone. How do I get the the application to work on my MacBook Pro?
    I have a picture, sound, it dials, yet never connects.
    Thanks.

    i have exactly the same problem except my macbook pro was bought in Dubai. I have set it up as though in the UK and have UK apple I.D. Also the VPN is on but still wont work.

  • WEBCAM in Vista is not working Macbook Pro

    i think the webcam in not known by vista ,can you help me with new
    update driver or solution which i can use the built in webcam
    in vista also , My laptop is Macbook pro and i purchase that
    about 1 year ago
    is possile send reply to my email [email protected] also

    Dear Jason
    thanks but my boot camp is ver2.2
    and when i try to install Ver 3.1 ,it comes with massage
    that at first i should have ver3 then i can upgrade to 3.1
    the link which you gave me is Ver 3.1 Upgrad only
    so can you help me with that also consider my windows is vista32bit ultimate
    when i want to use yahoo masanger two time green light for web cam
    turn on and off then it shows that it can not find the webcam
    also in micrsoft photo gallery when i want to import from
    camera or webcam it can not find the webcam also in control panel
    in camera section there is no camera finded
    so please give me you advise
    thanks

  • Headphone Jack Not Working Macbook Pro Mid 2012 Running Yosemite

    Hey everyone,
    I have a Mid 2012 MBP. Just updated to OS X 10.10 and used the headphone jack to connect my external speakers for the first time today. Had no problems t first, but after about 2 hours of using the headphone jack the sound started cutting in and out then about 10 minutes later, they just stopped working all together. Audio works just fine with out them plugged in. Also the sound is cutting in and out using the built in speakers also.
    I have Bootcamp(windows 8.1) and I have the same problem when using Windows also. Sounds like a hardware problem but im hopping its not cuz I dont have the warranty anymore(obviously).
    Anyone have any ideas?

    Reset the PRAM:
    http://support.apple.com/kb/PH14222?viewlocale=en_US
    When it is not working, look inside the audio output port.  See if there is a red light.  If so, the internal switch is stuck and the jack may free it if inserted a few times.
    If none of the above solves the problem, make an appointment at an Apple store genius bar.  The evaluation will be FREE.
    Ciao.

  • Bluetooth Not Working / Macbook Pro Retina / Late 2013

    Bluetooth suddenly not working on my Macbook. Definitley not the mouse (work's perfectly on another machine).
    PRAM reset and still nothing. Any solutions please?!

    That usually fixes the missing BT problem. I think, at this point, I would take it in for diagnosis.
    Barry

  • Dim light key and volume up key not working macbook pro

    I couldnt help to have realized when I turned my macbook pro on today when ever I type a P I get p0 P) and when I try to increase the volume my screen dims and when as I am typing right now my keyboard is typing in random functions not done before. Help Please !!!

    Try resetting PRAM/NVRAM   http://support.apple.com/kb/ht1379
    Try resetting the  SMC http://support.apple.com/kb/ht3964

Maybe you are looking for

  • SSRS vs Javascript Solution

    My boss wants to show to our stake holders that SSRS is a better solution for BI reports than a javascript based charting solution (Kendo UI). He has asked to provide him with information to help him prove his case, however, I have very little experi

  • Corrupt LOG File MaxDB 7.5 (Netweaver 04)

    At the Installation the LOG went full. LOG-Mode = SINGLE. Then I have added a new LOG File. Nothing happens. After rebooting the maschine, the database doesnt come up, in krnldiag there is following: 2004-11-14 22:46:30  7579     11000 vattach  '/sap

  • Problems with .aaf import in premiere pro cc

    Hi, So I'm having problems with importing an aaf file into premiere. The weird thing is it was working about a week and a bit ago, then stopped. I can't work out why, to my knowledge nothing has changed but if someone could point me in the right dire

  • How do i import photos from my iPhone to my macbook air in os x Yosemite

    Im trying to get photos from my phone to my macbook air and no option to do that has come up in the new os x yosemite.

  • Request for assistance with ddi_dmae_getattr()

    Hello, Situation: DMA attributes for a device passed to ddi_dma_alloc_handle() return DDI_DMA_BADAATR (driver code is explicity checking for this return code). The attributes are valid for the device. Since the device is in a system employing Solaris