Sound not working on Ipad after ios8 update

I updated to iOS 8.0.2 and the next day, while watching a TV show on my ipad, the sound completely stopped. I did a hard reset, thinking this would solve it, but it didn't work. Sound is not on mute. I tested out all apps that play sound, nothing was playing through the speakers; however, I can hear sound if I use headphones. I did the ipad reset suggestion I saw in a few articles, but still that hasn't work. Any other workarounds or am I going to have to go into the apple store?

Hello jggarcia,
It sounds like you have done all the troubleshooting from the article below. I know it is for iPhone, but the troubleshooting is still the same. After everything that you have done, check with the article to make sure you did not miss anything and if it is still giving you issue, then I would recommend making an appointment with your local Apple Store’s Genius Bar. 
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Regards,
-Norm G.  

Similar Messages

  • Usb tethering not working in iphone5 after ios8 update

    Hello,
    I have upgraded my iPhone 5 to iOS 8.  My personal hotspot is not working anymore with my laptop.  There is a personal hotspot section under cellular in settings, however i am not sure what to do!
    Kindly help on the same

    Hi Pathikrit B,
    Welcome to the Apple Support Communities!
    Please review the following article for information on how to set up your Personal Hotspot.
    iOS: Understanding Personal Hotspot
    Have a great day,
    Joe

  • Apple Composite AV Cable no longer working on Ipad2 after ios8 update. Only getting sound, can you revert back to ios7 or buy a cable that will work any help would be appreciated

    Apple Composite AV Cable no longer working on Ipad2 after ios8 update. I'm only getting sound no video can you revert back to ios7 or buy a cable that will work any help would be appreciated
    Thanks

    The 30-pin connector on the iPhone 4 dock might not have all the connector pins to do video.
    I'm 99% sure the Universal Dock does have the pins (and therefor supports video out).

  • Itunes does not recognize my device after ios8 update

    Why does iTunes does not recognize my device after iOS8 update and what can I do to resolve this.
    I am getting a "plug-into-Itunes-logo" screen on my iPad. Thx!

    Hi there janis831,
    It sounds like your device may be stuck in Recovery Mode. Take a look at the article below for how to restore your device.
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808
    -Griff W.

  • Multi gestures not working on iPad Air ios8 onwards

    Multi gestures not working on iPad Air ios8 onwards. Turning gestures off then on works briefly. It's annoying. Is the Air bust? In for rep-air?

    MMine has not been working ever since ios8 update. Apple blamed a game I have on the iPad, however this problem occurs on all apps including apple own brand.
    ITs it's almost like they don't care
    come on Apple sort this out !! It's been too long

  • My Amazon Prime Instant Video App does not show airplay symbol after IOS8 update

    JUst found out that the Amazon Prime Instant video app lost the airplay possibility after IOS8 update on ipad and iphone.
    Am I wrong or is there something I need to adjust on my devices?

    Airplay is found by swiping up and enabling via control centre
    Use AirPlay to wirelessly stream content from your iPhone, iPad, or iPod touch
    If AirPlay functionality has been removed or if there is error then it is up to the developer to fix

  • App update not working on iPad after multiple tries

    Cannot get iPad to update apps after multiple update attempts.  iPad has 13 updates in list but none will update for "update all" attempts nor for individual all attempt.  When tap individual update shows "updating"but apps never actually update.

    IOS 6 WIFI FIX FOR NOW!!!!!
    The only quick fix for now is to reset your Network
    Setting/General/Reset/Reset Nettwork Settings
    Make sure you copy your password somewhere. I did so on  Notes so that i could copy and paste.
    This will work for a while but the problem keeps coming back in a day or so but at least its a quick fix.
    I have the problem on both my Iphone and Ipad 3 with IOS 6
    The only other permanent fix is to go back to IOS 5 which I had back when I tried IOS 6 bata and had the same problem which I thought Applw would have Fixed.
    Apple better get there act together or Android is going to Kick there *** SOON!

  • ITunes Radio not working on iPad after update to iOS 7

    it shows its been updated and I can see the stations, but it keeps saying that radio station cannot be added
    or it will not even start...Ive rebooted it a couple times and even did a factory reset and it still will not play

    I would try and hold the power and home button down at the same time for 15 seconds or until device shuts off, then see if it works. If that does not work try resetting your device. If you do not want to reset it, contact Apple support.   make sure to back up everything on device!

  • Home share no longer works on iPad after ios5 update.

    The home share icon is visible in video application but clicking on movies I have purchased results in an error message - cannot open. The images and info for movies and tv shows also not displayed. ...The problem has now worsened. Pressing the moeshare button to access the itunes library on my macbook progresses to half way and then stops. I have rebooted the ipad, shut down icloud, restarted home share from itunes and even rebooted the wireless router. I have also tried deactivating sinc over wi-fi. None of this work. It is worth noting that home share works on appleTV and that I have not updated appleTV OS for a few months. The next thing to try would be to reboot my macbook that I am not hopeful will achieve anything. I am just letting anyone who is experiencing the same problem know that they are not alone.

    Update: After rebooting my macbook - Moves now playing. TV shows bought using a different apple ID account still does not work even though they did before.

  • Sound not working on ipad speakers, shows headphones and no headphone is plugged in.

    My sound is not working on my ipad2 speakers.  when I adjust the sound button it shows headphones, I have no headphone installed.  I tried reseting the ipad (turned off and on), reset with itunes, updated os.

    Hello,
    As per the information you have provided it appears that the audio port has been damaged. Make sure that there is no issues with the port, if there is no damage on the ports, you can get the iPad replaced under warranty.
    Resetting and restore would not work as this mostly appears to be a hardware failure.
    Thanks and regards
    Animesh

  • IMessage not working on iMac after iOS8 install on iPhone

    I installed iOS8 on my iPhone and my iPad but it seems to have caused iMessage to stop working on my iMac. It tells me that I cannot use my Apple ID for iMessage at this time !? Strange!
    I updated the OS on the iMac to the most recent update but the iMessage still does not work. It is giving me an error message to contact Apple support with a code number shown. I did that but since its sunday today nobody was available who would know how to fix it, which is VERY annoying.
    If anybody knows what to do could you please let me know.
    Thank You.
    Stano

    There is no official public documentation of that alert as far as I know, but apparently it can sometimes mean that the same Apple ID is being used with the iTunes Store or one of the other Apple content stores, and the payment method is invalid. Sign in to the store and review your account. You do not, of course, have to provide any billing information to set up an account to use only with iMessage, as it's a no-charge service.
    Another possibility is that the primary or alternate email address is invalid. Search the Web for the phrase "My Apple ID." The top hit should be an Apple web page with that title. I'm not giving a direct link because such links are never to be trusted. Sign in and verify the ID.
    Otherwise, do as the alert directs. According to reports, you won't be charged for the support call if you select "Apple ID"—not the hardware model—as the product you're asking about, and cite the "customer code" in the alert as the "validation code" when you speak to the Apple representative. I can't confirm.

  • Alert sounds not working in iPad

    My iPad does not play alert sounds and line2 does not send push notifications with sound until i open the app.  Maybe the app but does anyone else have this issue?  I have gone to settings/generalsound and set the "Ringer and Alerts" section sound to wide open and I turned the "Change with Buttons" to off.  Does anyone else have this issue.  I was not really looking forward to restoring a back up copy but I might have to.

    I have found the answer to my own problem...listed here in this discussion: https://discussions.apple.com/thread/3008964?start=0&tstart=0 it has to do with the lock mute/rotation button.  When the selector switch is on lock rotation alerts will not play sound.  Also sounds in apps and sometimes video will not work unless you are listening through head phones.  This bug has existed for a while according to the post in the link. 

  • Sound not working on iPad or Android (HTML5)

    ok I am having a problem with the audio on a captivate 6 project published to my server in HTML5 and viewed on Android or iPad. The audio works fine when viewed through a PC but doesn't start playing on iPad or Android untill a minute after the slide is displayed. Any idea why?
    here is the link to the published chapter
    http://184.173.246.251/~privatew/
    any help would be appreciated

    Same here I recorded the audio as mp3 with soundbooth and importeit directly to captivate. I am able to see the presentation running on android and ipad but the audio does not work or kicks in 3-4 minutes after the presentation.
    Lucas

  • Badge count not working on reminder after IOS8 upgrade.

    Hello,
    after upgrade my iPhone 5s (64) to IOS8 last weekend, the badge count (only for the reminder!?) does not work.
    Deactivating / activating did not helps.
    Note: Reminder works with iCloud sync
    Thanks for any answer,
    Dirk

    same here: https://discussions.apple.com/message/15712300#15712300

  • Itunes does not recognize my Ipad after software update. says it is in recovery mode, Itunes does not recognize my Ipad after software update.

    After an ipad software update, it does not recognize my Ipad in Itunes.  Gives error 14. what to do?

    You may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the iPad.
    If you haven't synced to a computer them (from here) :
    If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.

Maybe you are looking for

  • Stocktaking and inactive items

    Hello Everyone, Like a lot of businesses we have been having problems with the change of treatment of inactive items in SAP B1 8.8, we are now preparing to take stock and have found that whilst the stock audit report will show inactive items readily,

  • Deadline Monitoring for N-Level Approval Workflow WS14000033

    Hi, We want to setup Deadline Monitoring i.e. emails to be sent to approvers (when Shopping Carts remain unapproved in their Inbox past 2 days or so). Does anyone have any configuration/procedure document on how to do this? Regards, Ashwani

  • Spelling again | Multilingual doesn't work for all languages

    Hello, I am writing e-mails on a daily basis in different languages (English, German, Spanisch, Russian, and French). And, of course, I have set my Mail spelling checker to <Multilingual>. It works just fine with the first three languages. But it "do

  • Dynamic List of Values does not appear

    Hi All,    I am re-creating this post as I have not received an answer on it. Hi All, I created report (using Crystal Reports 2008) in which one of my parameters displays a dynamic LOV from a field. When I run the report in Crystal, I get to select w

  • "Insufficient privileges" to download iTunes 11.1 (Windows)

    I keep getting an error message that "installer has insufficient privileges," and saying I need to log in as administrator. But I am logged in as administrator - it's the only user profile on this computer. Any ideas on what I should try? Thanks.