Sound not working on ipad speakers, shows headphones and no headphone is plugged in.

My sound is not working on my ipad2 speakers.  when I adjust the sound button it shows headphones, I have no headphone installed.  I tried reseting the ipad (turned off and on), reset with itunes, updated os.

Hello,
As per the information you have provided it appears that the audio port has been damaged. Make sure that there is no issues with the port, if there is no damage on the ports, you can get the iPad replaced under warranty.
Resetting and restore would not work as this mostly appears to be a hardware failure.
Thanks and regards
Animesh

Similar Messages

  • HP 4330s SRS Premium Sound not working with External Speakers

    And this is my second topic and rant!
    The SRS Premium sound driver doesn't work with USB Speakers.
    It doesn't work with Bluetooth speakers either!
    In other words it only works with the Laptop speakers.
    ARE YOU KIDDING ME!
    SRS Premium sound for Deeper Bass and Clear sound enhancement bla bla bla now in you HP Laptop
    but ONLY with your LAPTOP SPEAKERS!
    ARE YOU KIDDING ME!
    DEEP BASS on these cell phone speakers!!! Really???
    Why doesn't the SRS Premium Sound driver work with external speakers!
    I believe I have used SRS Sandbox before and ALL THE SOUND was directed to that driver and it worked with everything!
    WHY DOESN'T YOUR HP DRIVER WORK WITH EXTERNAL SPEAKERS!
    Is everyone in HP a bloody RETARD?
    FIX YOUR DRIVERS!
    End of rant!

    Oh BTW {Content Removed: rant} http://www.srslabs.com/landing.aspx?id=693#23
    23. Will the SRS Audio Sandbox work with my USB speakers or Bluetooth speakers?
    Yes, the current version, 1.6.6.0 will work. If you have a previous version that is not working with these speakers, please upgrade to this version.
    Do you have anything else to share with me {Content Removed: rant}

  • Sound not working after checking for driver updates and resetting bios

    I am running a  (HP Pavilion dv7-6c60us Entertainment Notebook PC)
    I had muted the sound and did a system upgrad prompted by my HP assistant after logging on.   Now when I try to get sound nothing happens.  So I went out to the support site and checked for driver updates and none were found.  So I then went into my system bios and reset it as stated in a support for sound not working and still no sound.   HOW DO I GET MY SOUND TO WORK AGAIN?

     From your models support page Download & Save the latest Audio driver.Go into Control Panel,Programs & Features- Uninstall IDT software.Restart the laptop. After Windows loads, install IDT audio using the downloaded file.
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=5218...
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Alert sounds not working in iPad

    My iPad does not play alert sounds and line2 does not send push notifications with sound until i open the app.  Maybe the app but does anyone else have this issue?  I have gone to settings/generalsound and set the "Ringer and Alerts" section sound to wide open and I turned the "Change with Buttons" to off.  Does anyone else have this issue.  I was not really looking forward to restoring a back up copy but I might have to.

    I have found the answer to my own problem...listed here in this discussion: https://discussions.apple.com/thread/3008964?start=0&tstart=0 it has to do with the lock mute/rotation button.  When the selector switch is on lock rotation alerts will not play sound.  Also sounds in apps and sometimes video will not work unless you are listening through head phones.  This bug has existed for a while according to the post in the link. 

  • Iphone 4s, keypad sound not working, volume buttom doesnt show up or down

    Hello,
    I have bought my iphone 4s, 32gb 2 days back and i found out that the keypad sound does not work. i have gone to the setting, sound and turned on the sound of lock and keypad. However, its not working. also, the colume buttom when i click it up or down it doesnt show the bar, actually its doesnt work it shows only the symbol of sound.
    i tried to reset, restore... no results
    anyone can help me with that??
    Thanks

    I spoke with Apple and they suggested doing a restore. I did this and the sound was restored. I started installing my tweaks and programs, each time testing the sound. When I installed "Hands-Free Control" the sound issue came back. This is a tweak to allow you to control Siri without having to hold the home button. When you activate the listening option, the sound on the phone stopped working. When you turn it off, it started working again. I dont know if the rest of you are have this Cydia tweak, but that was the culprit for me.

  • Sound not working on iPad or Android (HTML5)

    ok I am having a problem with the audio on a captivate 6 project published to my server in HTML5 and viewed on Android or iPad. The audio works fine when viewed through a PC but doesn't start playing on iPad or Android untill a minute after the slide is displayed. Any idea why?
    here is the link to the published chapter
    http://184.173.246.251/~privatew/
    any help would be appreciated

    Same here I recorded the audio as mp3 with soundbooth and importeit directly to captivate. I am able to see the presentation running on android and ipad but the audio does not work or kicks in 3-4 minutes after the presentation.
    Lucas

  • Sounds not working in iPad

    Tried by operating right edge buttons,
    I tried all options in settings and sounds
    also tried rebooted iPad by turning off n on

    Check Settings>General>Use Side Switch to:  Set for lock rotation or Mute
    Check Side Switch (Slide) button on right (above volume up/down)
    Open Control Center (Slide up at bottom center of home screen) and Verify Volume level

  • Sound not working on Ipad after ios8 update

    I updated to iOS 8.0.2 and the next day, while watching a TV show on my ipad, the sound completely stopped. I did a hard reset, thinking this would solve it, but it didn't work. Sound is not on mute. I tested out all apps that play sound, nothing was playing through the speakers; however, I can hear sound if I use headphones. I did the ipad reset suggestion I saw in a few articles, but still that hasn't work. Any other workarounds or am I going to have to go into the apple store?

    Hello jggarcia,
    It sounds like you have done all the troubleshooting from the article below. I know it is for iPhone, but the troubleshooting is still the same. After everything that you have done, check with the article to make sure you did not miss anything and if it is still giving you issue, then I would recommend making an appointment with your local Apple Store’s Genius Bar. 
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    Regards,
    -Norm G.  

  • Sound not working for text alert just vibrate

    Sound not working for text alert just vibrate and no sound on keyboard

    I'm having the same problem, it just started today (11/13/2012). 
    Settings > Sounds> Text Tone = Tri-tone
    Lock Sounds = On
    Keyboard Clicks = Off
    The mute button is also in the correct place (ring, not mute).

  • HT2822 My Apple is not working. Apple TV is blinking and asking to be connected to iTunes. I don't know what to do. Anyone able to help?

    My Apple TV is not working. It is blinking fast and askes to be plugged into iTunes. How do I solve this? Anyone able to help?

    You need to grab a micro USB cable and restore via iTunes
    http://support.apple.com/kb/ht4367

  • I have no sound for games in my iPad. I have tried the reset but it does not work. The speakers work as I have sound for music and videos.

    I have no sound for games in my iPad. I have tried the reset but it does not work. The speakers work as I have sound for music and videos.

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) http://support.apple.com/kb/ht1430
    Check your settings. The iPads have a small switch on the right edge. http://support.apple.com/kb/ht1430 It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
    If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    iPhone: Can’t hear through the receiver or speakers
    http://support.apple.com/kb/ts1630
    http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
    To solve some sound problems, just follow these simple steps
    1. Go to Settings
    2. Tap on General
    3. Tap on Reset
    4. Tap on Reset All Settings
    What this effectively does is to reset some of your Settings to factory default. It’s not a complete removal of settings. It removes all of your preferences for Wi-Fi, Bluetooth, Do No Disturb, Notifications, General, Sounds, Brightness & Wallpaper and Privacy. It doesn’t affect your data. All of your email accounts will remain intact, as well as any SMS text or iMessages.
     Cheers, Tom

  • IPad sound not working

    iPad sound not working. Need help

    Is it working on any apps e.g. Music and Videos apps but not third-party apps or notification sounds ? If you do get sound in Music and Videos then have you got notifications muted ? Only notifications (including games) get muted, so the Music and Videos apps, and headphones, still get sound.
    Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

  • HELP iPad mini sound not working

    We just bought our daughter her iPad mini today and the sound just stopped working. It'll only work with headphones; we never put headphones in prior to the sound not working. I tried resetting the phone and phone settings several times, as well as plugging in and out headphones. I changed the switch on the side to lock rotate. I also turned off the mono sound thing. I am at a loss as to what else there is to do. Any other suggestions? I've been at this for a couple of hours now trying to fix her iPad. Please help!

    Do you get sounds in any apps on the iPad ?
    If you get sound in the Music and Videos apps but not others then have you got notifications muted ? You say that you changed the side switch to rotation lock, but are sounds muted ? The switch on the side of the iPad controls either rotation or mute, the function that it isn't controlling is set via the iPad's control centre : swipe up from the bottom edge of the iPad's screen and it's the right-most of the 5 icons in the middle of it (if the icon is white then it's 'on', tap it to turn it grey and 'off').
    Notification mute and rotation lock : http://support.apple.com/kb/HT4085

  • My itunes 11 Home sharing is not working with my windows 7 PC and iPad it shows up on iPad and when I go to share the music app does loading for 3 mins and crashes I am using a virgin super hub router please please please help

    My itunes 11 Home sharing is not working with my windows 7 PC and iPad it shows up on iPad and when I go to share the music app does loading for 3 mins and crashes I am using a virgin super hub router please please please help

    My itunes 11 Home sharing is not working with my windows 7 PC and iPad it shows up on iPad and when I go to share the music app does loading for 3 mins and crashes I am using a virgin super hub router please please please help

  • Sound not playing through internal speakers or headphones

    Okay, so I am wanting to listen to audio, but it is not working through my speakers or headphones. Last time that this happened, I know that it had something to do with airplay, since I remember doing something with airplay. I have no idea what is causing this this time, but if you need any additional details, just ask.

    Have you tried a PRAM reset?
    http://support.apple.com/kb/ht1379
    Ciao.

Maybe you are looking for

  • How to manage different load frequencies in OWB?

    How to manage different load frequencies in OWB? We are using OWB repository 10.2.0.1.0 and OWB client 10.2.0.1.31. The Oracle version is 10 G (10.2.0.3.0). OWB is installed on Linux. We have situation to bring data feed into database using OWB on di

  • Need help in tranfering contacts

    hi.. need help in transfering my created contact from my windows pc outlook to my iphone 3g without lossing my contacts in my iphone..... because i tried creating one contact using my outlook in my windows pc and sync it to my iphone using itunes but

  • Can SQL Loader load files on a remote server?

    Hello, I normally use SQL loader on my PC to load an 8i database located on an NT server in another state. The input file is rather large and takes several hours to load-- even with all the contraints, etc. disabled. I assume this due mostly to all t

  • How to use the character encoding model to use ' �'  in java

    hi I have to use the special characters like '�' using java.but when '�' character is transferred to data base or is displayed in my form,it is shown as '?'.but i need to display the original characters in the form of what it is. what can i do as i e

  • Windows 2008 R2 SP1 - Exchange 2010 SP2, RU7, 3 node DAG - Possible Port Exhaustion?

    Hey TechNet So today at about 10:00 am the exchange server dropped all connectivity (except for ping) and was not accessible by RDP and I could not connect to the service control panel etc. (from a remote machine). In addition I could not log on to t