Sound off after using Headphones- next Startup

After utilizing headphones and shutting down computer (w/ phones still plugged in) - the next time the E205 Satellite is started there is no sound. So is there a way to prevent this, other than obviously remembering to unplug the phones ! Machine seems to default to headphones. Thanks

Reset PRAM. http://support.apple.com/kb/PH4405
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".

Similar Messages

Sound for messages and e-Mail get turned off after using handsfree in car

Does anyone have a solution when sounds alerting messages and e-mails are turned off after using the phone in var with handsfree (using Bluetooth)? The sounds are turned back on when restarting the phone but reoccurs after driving in car with handsfree again. This is very annoying when takling several trips with car during a day. The phone still rings when receiving a call.

I did find a solution to my iPhone-iPod-music-overriding-streaming-streaming-services-while-connected-to-USB problem Although, this solution is likely only applicable to BMW owners with the BMW Apps feature aka 6NR.
There may be other/simpler ways, but this seems to work:
1) Launch Pandora (or could be Mog, or other BMW Apps app) BEFORE you start iPhone/iPod playback
2) Start playback of Pandora via ConnectedDrive/BMW Apps.
3) Press Home button on iPhone, launch your streaming app.
The car still seems to think it's in the ConnectedDrive audio menu, as evidenced by the Entertainment details screen. You can now consistently play back any other audio service via your iPhone without the iPod audio overriding what you're doing. Good times! The only drawback so far is lack of ability to skip tracks via the steering wheel.
As long as you haven't started iPhone/iPod playback when you get in the car, you can often skip steps #1 and #2, and go straight into the ConnectedDrive menu, then go to step #3. Either way, following steps #1-3 works everytime.

Hello sir my iphone screen turns off after using 2-5 minutes what would be the problem please help me out

hello sir my iphone screen turns off after using 2-5 minutes what would be the problem please help me out

To make sure that this is not software related, set it back to factory settings, without using any backup data afterwards. Set up the rest of the personal settings manually and test the phone. If it still does not work, this is a hardware issue and the phone has to be serviced by Apple or an Authorized Apple Service Provider:
Use iTunes to restore your iOS device to factory settings - Apple Support
Find an Apple Authorized Service Provider
iPhone - Contact Support - Apple Support

After using headphones for about an hour both my built-in speak and head phone stop working

After using headphones for about an hour both my built-in speak and head phone stop working, what could be wrong? I have checked system preferences and all appears ok there but still no sound

Your put your Air into sleep mode with headphones attached, I assume.
Upgrade to the latest OS to resolve that issue.
10.9.2 Apple icon upper left "software update"

IPad 2 has no sound unless I use headphones???

My iPad has no sound unless I use headphones. Any suggestions? I have checked all settings, etc.

Have you got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound. Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

The volume keys on my MacBook Pro stop working after using headphones.

The volume keys on my MacBook Pro recently stopped controling the volume after I've used headphones. I still have sound; I just can't make the volume increase or decrease. The mute, however, still works just fine. Because I have sound from the intenral speakers I know the computer doesn't think the headphones are still in the jack. A reboot fixes the problem, but as soon as I use headphones the problem starts up again. I want to fix this permanently.
I don't know if this helps but all the other keys (brightness, play/pause, etc) still work. I recently had to reset the PRAM because my computer refused to sleep when the lid was shut. I've checked system preferences and everything seems to be in order.
Can someone please help!?

I found this advice on another thread after encountering the same problem - I did the reboot and it worked fine and dandy!
I spoke with Applecare to fix my Macbook volume. Apparently there are pins inside the speaker/headphone jack that can get jammed. We fixed mine by doing some sort of reboot:
Turn off laptop.
Hold down the Option, Command, P, and R keys (all four at once, it's tricky!) and while holding down the four keys, turn on the computer. When you hear the second chime, release the four keys.
This re-set the sound toggle to internal speakers. Now I'm afraid to insert headphones again, but I assume this reboot will work over and over.

Restore sound when not using headphones?

Sound works only with headphones. How can I get sound back without headphones?

Hi William, begin by opening "System Preferences". Next proceed to "Sound" (under the "Hardware" category). Then go to the "Output" section. Select "Internal Speakers" as your output medium. Proceed to select "Sound Output" from the drop-down list titled "Use audio port for: ". Finally ensure that the "mute" checkbox is unchecked and that the volume slider is at an audible setting.

Should I switch my iPad off after using or lock off is enough?

Hi. After use iPad should I switch it off or lock off is enough? When I cover my iPad it locks off. Does iPad work while it is locked off? Thanks.

You can leave your iPad locked without any problem. Furthermore, it's recommended instead of turning your iPad off.
Your iPad, when it's locked, can receive mails, updates..., but it doesn't take a lot of battery, so it doesn't make sense to turn the iPad off

Bluetooth automatic off after using

I hope that Nokia update the firmware of their S60 series phones. I really hate turning off the bluetooth manually after using it. Unlike my previous S40 handsets, after you have finished sending media files, the bluetooth connection is turned off. On S60 series phones, you had to manually visit the bluetooth menu and turn it off. Why can't they implement it to conserve power?

you don't say what model you have , but on touch screen, a litttle bluetooth icon appears on home screen in top right hand corner when BT is activated. If you tap it, the phone goes straight to bluetooth, tap off, exit and thats it. It's not automatic, but thats all it takes on my N97 when I get out of the car at work every morning, and it only takes a couple of seconds !
Hope this helps.
Good Luck
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Digital sound output only after using Headphones

i used my MacbookPro 17 2.66
with headphones to listen to music and after i removed headphones there is a red light in the headphone port and only digital sound output option in system preferences control panel
If i reinsert headphones, headphone output reappears
Where are my internal speaker option gone
i have a time machine backup
Can i just replace sound preferences
Thanks

Generally that means your headphones' plug is not exactly to dimensional stands and has jammed the internal connector in the jack to the "mute" position. The plug's tip-to-shoulder distance seems to be the variable.
I've found with my MBP that, with non-standard plugs, inserting them only until they function--not until the "stop shoulder" hits the MBP case--prevents this. I have an old and cheap set of external speakers whose plug works perfectly. A patch cable I use to connect to my desktop sound system has a non-standard plug, and I have to leave the plug slightly out of the jack to prevent the problem you see. Again, insert until you hear proper sound to the device, not by feel. I've no problems with the plugs falling out using this technique.
The "official" fix is a new logic board but most people are able to free the internal contact by inserting a plus into the jack and gently wiggling it in the horizontal plane. One person recently said he freed his with a wooden toothpick.
If you use anything other than a standard plug to manipulate the jack, be certain it's non-conductive. BTW, if you use the "Search Discussion" option in the upper right of this page and search for "red light" (use the quotes) you will see a number of threads here on the subject.

Centro has no sound after using headphones

Hi, all. I used a 2.5 mm jack (radio shack adapter) so I could used my good quality headphones and listen to mp3 music. After removing this, my Centro had no volume when making calls and people on other end couldn't hear me either. The common fix for this (wiggling a pin inside the 2.5 mm female jack of the phone) did correct this. But I won't do this every time I want to listen to mp 3.
So, why did this happen? Is there a specific type of 2.5 mm jack, or is this a phone defect (ie: a pin inside the female end of the jack sticking)? Is this a common issue? Is there a permanent fix?
Post relates to: Centro (AT&T)

This issue has been reported on Treo model phones. It sounds like the microswitch in the headset jack is sticking.
What you have done is similar to the procedure supplied in the kb.palm.com article regarding the headset jack issue.
Here are the steps for trying to resolve the issue.
Plug and unplug: Try plugging and unplugging the headset to the smartphone a couple of times. The smartphone might mistakenly be under the impression that a headset is plugged into the phone, which would make it route audio to a nonexistent headset.
Clean the jack: If there is contamination or debris stuck in the audio jack, the speaker, microphone or headset may not work properly. Visually inspect the jack for debris that could block the connection. Try inserting and removing the handsfree headset a couple of times to see if it clears the debris from the device. You can blow into the jack or use gentle compressed air to clear debris. Note: Be cautious in using foreign objects to clear the jack. Like your ear canal, the headset jack is a delicate space that can be damaged if you clean it improperly.
Where's the trouble? If the steps above didn't help, you may need to contact Palm for further troubleshooting. An agent can walk you through a process to determine whether a particular component is failing, and whether the device needs repair.
I would suggest using a non-conductive electrical contact cleaner (you can find this in the electrical dept. at Home depot or hardware stores), spray it on plug of your headphones, insert and remove the plug several times to try and clean the jack.
For reference purposes, click on the following link for the support page for your device on the kb.palm.com webpage.
http://kb.palm.com/wps/portal/kb/na/centro/centro/att/home/page_en.html
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.

No sound after using headphones to watch a netflix movie

I am looking for help to resolve my no sound issue. I can hear sound with headphones but not from computer speakers. Help????? I have tried going into itunes and using the headphones and unplugging them. I have gone to system preferences and I am getting a message that states the selected device has no output controls..... any ideas????

it's not software related the fact that it happened after ios7 is random
it's a hardware issue
read more here
https://discussions.apple.com/thread/1343532?start=315&tstart=0
read more here
https://www.google.dk/search?client=opera&q=iphone+stuck+in+headphone+mode&sourc eid=opera&ie=UTF-8&oe=UTF-8

Sound completely turned off after pulling headphones out

I was listening to some music on my headphones and finally unplugged my headphones from my computer and suddenly I can't hear anything. I make sure that my volume is on and nothing is on mute. I don't understand what happened. I checked if the volume buttons work, they do and on high volume, I check the Audio MIDI Setup which I just discovered when I was trying to figure out how to bring volume back into my computer and not sure what to look for. Someone help?

Is there a red light shining in the headphone port ?
If so (and even if not), some solutions to be found in this threadhttps://discussions.apple.com/message/10384803#10384803
The "Tooth-Pick" approach has helped a lot in here with the same problem.
Stefan

Sound disappears after plugging headphones in/out

My sound disappears right after i plug my headphones(for iphone), so there is no sound in the headphones. After some minutes, 3-5 maybe, it appears again. The same happens when I plug the headphones out...again, after 3-5 minutes it appears...

More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
Exactly what is INSIDE the video you are editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download
Read Bill Hunt on Audio Conforming http://forums.adobe.com/thread/726693
-and Source Patching http://forums.adobe.com/thread/1442800?tstart=0

IPod shutting off after use?

Hi everybody, so i was using my iPod touch and the app i was using started to glitch a bit, i didn't pay attention to it and kept playing. Then a few seconds later, my iPod shut off and the silver apple symbol popped up. Ive seen it before when my uncle starts up his iPhone, but it doesn't do it on startup on mine. What's going on and what can i do? Thanks

- Have you tried resetting your iPod:
Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Next would be restoring from backup via iTunes
- Next restore to factory defaults also via iTunes since there could be some corruption which is now in your backup.

Sound off after using Headphones- next Startup

Similar Messages

Maybe you are looking for