Sound on DVD Scratchy

I just burned a DVD from a 4 minute movie that I made. The movie was just pictures with music behind it. The video was fine but the audio is all scratchy (this has happened on the last couple that I burned). The song was a purchased song from iTunes. I check the volume level in both iMovie and iDvd, both sliders are in the middle. Should they be lower? Or should I look for another problem.
Bernie

Hi
When using audio from iTunes I copy out as an .aiff audio-CD. Then using this in my
movie projects. I never use .mp3, .avi or .wmv without converting them to .aiff first.
*Not knowing the origin to Your problem - General approach when in trouble is as follows:*
• Free space on internal (start-up) hard disk if it is less than 10Gb should rather have 25Gb
• Hard disk is untidy: Repair Permissions, Repair Hard disk (Apple Disc Util tool)
• Delete iMovie pref file - or rather start a new user/account - log into this and re-try
• Third party plug-ins that doesn't work OK (not relevant for iMovie’08)
• Program miss-match: iMovie 5.0.2, up to Mac OS X.4.11 AND QuickTime 7.4.1 - is OK
• Program miss-match: iMovie 6.0.3 or 6.0.4, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK (might work under Leopard)
• Program miss-match: iMovie’08 v. 7.0.1, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK (might work under Leopard)
• Screen must be set to Million-colors
iMovie pref file resides:
Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences and is named: com.apple.iMovie.plist
While iMovie is NOT RUNNING - move this file out to desk-top.
Now restart iMovie.
From LKN 1935: (in this case = iMovie HD (5), I tried it all, but nothing worked.
Your answer (above) has been helpfull insofar as all the different trials led to the conclusion that
there was something wrong with my iMovie software. I therefore threw everything away and reinstalled
iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos)
to my Sony camcorders worked properly as it did before.
Yours Bengt W

Similar Messages

Compaq presario f750us sound and dvd drive issues

i have a compaq presario f750us runnin windows 7 ultimate 32-bit when i first turn on the machine the sound and dvd drive work correctly but after about a hour of it being on both devices stop working an they dont appear in device manager.

Have you looked at your AutoPlay settings?
what is autoplay: http://windows.microsoft.com/en-us/windows/change-autoplay-settings#1TC=windows-7
FAQ tutorial: http://windows.microsoft.com/en-us/windows/autoplay-faq#1TC=windows-7
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

G5 with no sound from DVD's

Here's a strange new problem...
I CAN play a CD thru iTunes.
I CAN get tones for clicks, beeps, etc when I change settings on the Sound Preferences panel.
But, when I work on a DVD Tutorial, I can't get the sound from the DVD. And it's not one DVD... it's several.
What's happened?

I no longer have sound with DVD Player. I checked the audio output setting under preferences - there really wasn't much to select. Audio output was set to System Sound Output (the only choice) and "Disable Dolby dynamic range compression" was not selected. I have a MacBook, OS X 10.4.11. The DVD Player is version 4.6.5, Framework version 4.7.0. Was working fine and then when I tried to watch a DVD that I had been watching the night before, there was no sound. The video part if fine. The DVD is fine on a standard DVD player. Sound is fine using iTunes. Any suggestions appreciated.

Keynote to quicktime movie to iDVD, no sound on dvd

I know this has been asked a million times, however I (a relatively recent Mac convert) absolutely can't believe that Apple would not allow this to work.
I have a keynote slideshow with music. I "send to iDVD" as well as "export" into a quicktime movie. Resultant files are movie and soundtrack. I bring into iDVD. Sound plays in iDVD. Burn dvd from iDVD, no sound on dvd.
C'mon, the instructions are there, the menus are there. Apple can't expect us to "import into iMovie, match movie and soundtrack" or "burn using disk utility" or otherwise do anything other than take a keynote and make it in to a dvd.
Worst case, can I just burn a CD or DVD that automatically plays the keynote with sound and doesn't have the cool DVD Menu?
Again, sorry for the "same old question", however I have not found a fix that worked nor do I believe that Apple means for this to be so difficult.
For those experts out there that have seen this question before, I really have spent a significant amount of time researching the problem and haven't found a fix that worked or an official response from Apple.
Thanks again.

I am not running this on an intranet, I am creating a video for my students and posting it to my Internet web page. So if I were to post the keynote file itself, 4/5 of my students would be unable to open it because they don't have Macs. Some do not even have desktop computers and view stuff on their smart phones. I solved the issue, at least partially, by saving the presentation as html and posting it to my site that way. It works but it is a bit buggy. Would still rather make it into a movie.

Recording a surround sound cd/dvd for home theater

I am trying to burn a 5.1 surround sound cd/dvd with different audio in each channel. I have created the file without any problems and it will play on my computer in surround sound. When I burn the cd/dvd (I have tried both) all of the audio plays in all channels. How do I burn the file onto a disc so that it will play correctly as surround sound in my home theater?

I know this question was asked ages ago, but I'm sure others are probably looking for an answer too (as I was over a year ago, when I started working with Audition 3).
In my experience, there is no way to directly export a functional 5.1 file from Audition. You can surround mix a file using the surround panner, but you can't export in the file format used by most home theater systems (.ac3 - Dolby Surround Sound). My solution was to track down a standalone encoder, although there may be pugins available to allow Audition to do this. After surround mixing, I export to 5 mono wav files and then drop them into this absolutely ancient program called Soft Encode, which creates a single, interleaved .ac3 file out of my source files. Then, I take the .ac3 file, create a blank video the same length, and use my video editor to burn them to a DVD.
From what my research turned up, the reason Audition does not have the capability to export in .ac3 is because of the expense of licensing with Dolby. I would love to see a more sophisticated surround panner in AA4, as well as the ability to natively export .ac3 files, but by the same token, I don't want to see a skyrocketing price, so I'm waiting to see what happens!

No Sound During DVD Playback

I have a new HP elitebook 8460p and there is no sound during DVD playback. Is there a setting I may be able to change? Here is a list of things I've tried and pertinent information:
- Confirmed all system mute settings are off (e.g., not muted)
- Confirmed DVD works on other devices
- DVD will not play sound in InterActual Player, Windows Media Player, or VLC Media Player
- Picture is fine...just no audio
- Running XP
- All other system sounds work
Help!

Try installing AC3 Filter:
http://www.free-codecs.com/download/ac3_filter.htm
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Changing target directory of sound effects, DVD templates etc.

My Adobe Premiere 13 works fine but I want to change the target directory of sound effects, DVD templates etc. Default setting is C:\ .... In Adobe Organizer such option is not offered. How can I change this target directory?

newbie Sue
Premiere Elements 13/13.1 have content download located in the Online Folder...
Please see
Local Disc C
Program Data
Adobe
Premiere Elements
13.0
Online
and in the Online Folder are the DVD Templates and Sound Effects Folders.
I have found that once deleted the Online Folder will regenerate in the same place from which it was deleted.
So, try it if you must, but I would discourage you from doing so.
Please explain what the Elements Organizer has to do with all this. Are you trying to get Sound Effects and Movie Menus into the
Elements Organizer Create Slideshow feature? Cannot do.
Please give more details and I will think about this some more. My first impression that you are targeting cannot do goals.
Thanks.
ATR
Add On..after the above was posted, I found some grammatical points that I corrected.

Exporting sound for dvd studio 4. Studio 4 is only accepting ac3, saying bit rate too high in ALL other formats. However, aa3 auto levels the sound, which is not wanted, and it also drops the volume by about 40%, also not wanted. How do I get around this.

I have successfully used various formats and bit rates of sound in DVD Pro 4 with no problems, AIFF, WAVE, (obviously preferable as they give a good quality of sound as intended). However, of late, DVD Pro 4 refuses AIFF, WAVE, and anything higher than the lowest ac3 bit rate/format. This is rendering an aweful sound, auto volume leveled - which gives a very unprofessional fluctuation in volume and making a ionsense of careful sound editing. It also renders the volume at about 30% - 40% lower than the original master requiring huge increase in amplifier volume settings to get a decent volume.I have tried every format and bit rate, but FCP and DVD Pro 4 will only accept the lowest ac3 setting.
I have customers awaiting video of their concerts, can not deliver with this sound issue.
very much appreciate some assistance here.
Phil TP

I suggest posting this in the Final Cut Studio forum where regular users of DVDSP are more likely to see your post and respond. When you do, I would expect someone will ask why you arent using Compressor in your workflow…)
Good luck.
Russ

On my iPhone 4 the sound is all scratchy when listening through earbuds or dock. Its any sound, music, utube videos. If I play it through the iPhone speaker or from bluetooth it sounds fine. It just started about 3 weeks ago. Any suggestions?

In the last three weeks my iPhone 4 (OS 5.1.1) the sound became all scratchy when listening through the ear buds of if I dock it. The sound is fine listening to it from the iPhone speakers or in my car through bluetooth. Please remember its all sound. Whether its music, utube or a phone call. Any suggestions?

Mini Man, I'm glad to read you found a solution to your issue, but I don't know if your solution is going to be mine as well.
For starters, I do not have the new Apple TV - at least, not yet. I have ordered one, but it will not be delivered until some time next week (sneering glance at Steve & Co. for abandoning that platform rather than making it AirPlay compatible).
But that is not really my issue: my issue is that my two Airport Express units do NOT show up in the iPhone, though the DO show up on my iPad. This tells me they have been properly configured (both units have names, and are connected to the house network), so there must still be something missing from the equation.
And, judging from the response of a few others who have chimed in here, I think it's save to say that the experience is not altogether uncommon.
I'm surprised nobody has come back with a more direct solution to the common issue. I may have to call AppleCare someday this week...
--PS

Very strange problem with sound in dvd player

Hi
I have a strange issue which I am cannot resolve. I recently purchased season 2 of NYPD Blue on dvd, region 1 (http://www.amazon.com/gp/product/B00008YGRR/qid=1151702794/sr=1-3/ref=sr13/103-1409159-4182204?s=dvd&v=glance&n=130). The season is spread over several discs. The region of the dvds is the same as that of the superdrive on my 1.25 factory spec 15” pb running 10.4.6.(always has been region1) On playing the dvds in dvd player, the sound is very quiet, and you can hear a slight hissing noise (picture is fine). However, if I set the balance of the speakers in system preferences to the left (as far as I can) the sound becomes louder and the hissing disappears. Hence the sound is normal, other that the fact that it is unbalanced. The same happens if I set the balance to the right. Hence the hiss is only there when the balance is set to the centre or around it i.e. slightly to the left or right. This problem is true of all the dvds in the set.
Fair enough, the nypd discs are defective.
However, I then played them in a standalone dvd player without any fancy sound settings etc and no problems at all. Hence I then thought that the problem was with my pb - the only different thing I have done lately is use handbrake to put some of my other dvds (not these NYPD ones) on my iPod, so I thought that handbrake had done something (although I don’t know see how it could have done anything). However, today I tried some other commercial dvds in my pb (produced by the same company) and they sounded fine as has been the case for over two years. Hence, there is something about the nypd blue dvds which affects the quality of the sound output in my pb when the balance is centred. However, whatever this is it doesn’t seem to bother standalone players, nor is it something that anoth of my other dvds have.
Any ideas on what exactly is going on here, as it has me stumped.
(I don't have any other season of nypd blue, so I can't see if these have the same problem as well.)
Thanks
Jef Raskin. A true genius. March 9, 1943 - February 26, 2005 (I'm not Jef!)

DVD

HUGE PROBLEM with sound in DVD Studio Pro 4

As I imported the soundtrack of the footage that I have (which is about 1h16), the combinaison of my video & the sound is over 4,7 Gig. Therefor, I can't burn it on a DVD.
I exported the audio in a lower quality to finally obtain a size of around 210mb for the sound (which was 844mb BEFORE!!!)
BUT, As soon as I add it to the timeline, the size goes up again to 855mb encoded!!!!!! I even tried which a compressed AIFF file of 50mb and the sound is still encoded to the same size, 855mb!!!
Where and how can I change the encoding of the audio in DVD Studio Pro so that I can lower the quality just a little bit so but my video and the audio will fit on a standard 4,7 Gig DVD!
Thanks!!

Drop your aiff files into Compressor, and elect Dolby 2 with -31 normalization no film compression.
I don't know what you mean by "I exported the audio in a lower quality."
Audio must be 48/16 stereo aiff/pcm before it is encoded in Compressor to Dolby 2.
What are your target and maximum bit rates for video in Compressor? Are you export video and audio separately before encoding in Compressor

Recording sound from DVD and CD play

I just bought a Zen V Plus. Could someone please tell me how to record sound from a DVD and/or CD to my MP3? Thank you!

Try this:
1. Connect the Line IN jack on your player to the line output of an external stereo source, such as a CD or MiniDisc player, using the supplied line-in cable.
2. Press the Back/Options .You may need to do this more than once until the main menu appears.
3. Select Extra button to start a line-in encoding.
5. On your external stereo source, start playing the song you want to encode.
6. While encoding, you can press and hold the Back/Options button and select one of the following items:
Pauses the encoding. You can also pause the encoding by pressing the Play/Pause button.
Stops and saves the encoding. You can also stop the encoding by pressing the Record
Split Ends and saves current recording session, and begins a new one.
7. Press the Record button to end the line-in recording. The recorded track is named LINE followed by the date and time of the recordin YYYY-MM-DD HH:MM:SS<. For example, if you record a track on March 5, 2004 at 2:57 pm, the track is named LINE
This information can also be found in your user's guide, it's a .chm file found in your installation cd.

No Sound from DVD - X-Fi Music

Hi, I'm currently using a SB X-Fi Music card in a Compaq SR705 PC that has it's own on board sound card. Although the on-board is not in use Win XP device manager does not allow me to disable it. My problem is that while using Win Media Player to play music (or i-Tunes or any of Sound Forge, Audacity, Magix, Cubase, Sibelius etc) there is no problem with sound. When, I try to play DVDs though via Win Media Player pictures are good but no sound. Any ideas anyone? Thanks, Andy

bump

No sound from DVD

I am not getting any sound from playing DVDs. Cds and all system sounds are OK. iMac running Leopard. Please help

Check the "Audio output" setting in DVD Player's "Disc Setup" preference.

Use SB Live External to play sound from DVD pla

I have tried to connect a cable from my DVD player, phono connection I think it is called, and to a SB Li've External card with a minijack to the "line in".
But I get no sound, have tried options and so on, without any result.
What is wrong? Please help

Does anybody have any idea?

Sound on DVD Scratchy

Similar Messages

Maybe you are looking for