Sound on HP Laptop Not Working

the IDT high defintion audio codec has stopped working on my laptop, any ideas on how i can fix this
The laptop is still under warrently so i could take it back
Cheers
Em

Get your Product Number by pressing Fn + Esc key or check the Service Tag attached to bottom, may be under battery.
 Go to the link below.Enter your Product Number .After entering PN, click Next ,then choose Software & Drivers.On the next page use the dropdown to select your OS (probably Windows 7 64bit). A list will populate with drivers. Download & Save the latest Audio driver.
http://h10025.www1.hp.com/ewfrf/wc/siteHome?cc=us&​lc=en
Go into Control Panel,Programs & Features-uninstall IDT software.Restart the laptop. After Windows loads, install IDT audio using the downloaded file.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Similar Messages

  • Why is the sound on my Envy not working?

    Why is the sound on my Envy not working?  Checked all volume levels, mute, settings etc.

    Hello NellyMac,
    You state you are not getting any sound from your laptop, is that correct? I will be happy to help you.
    Can you please provide the full make and model of the computer you have, If you are unsure where to locate that information have a look at this link for help if needed.
    Please respond back at your earliest convenience.
    Thanks
    Clicking the White Kudos star on the left is a way to say Thanks!
    Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

  • I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you plea

    I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you please advise?

    You may need many other updates to retain compatibility with Lion. I suggest you reinstall Snow Leopard. Unfortunately, you will need to erase the drive first. Be sure to backup your data if you haven't done so already.
    Clean Install of Snow Leopard
    Be sure to make a backup first because the following procedure will erase
    the drive and everything on it.
         1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
             with your computer.  Insert the disc into the optical drive and restart the computer.
             After the chime press and hold down the  "C" key.  Release the key when you see
             a small spinning gear appear below the dark gray Apple logo.
         2. After the installer loads select your language and click on the Continue
             button. When the menu bar appears select Disk Utility from the Utilities menu.
             After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
             size.)  Click on the Partition tab in the DU main window.  Set the number of
             partitions to one (1) from the Partitions drop down menu, click on Options button
             and select GUID, click on OK, then set the format type to MacOS Extended
             (Journaled, if supported), then click on the Apply button.
         3. When the formatting has completed quit DU and return to the installer.  Proceed
             with the OS X installation and follow the directions included with the installer.
         4. When the installation has completed your computer will Restart into the Setup
             Assistant. After you finish Setup Assistant will complete the installation after which
             you will be running a fresh install of OS X.  You can now begin the update process
             by opening Software Update and installing all recommended updates to bring your
             installation current.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • My sounds and audio is not working. it's not in mute. help please

    i need help. my sounds and audio is not working. but it's not in mute button.

    Hi,
    Can you post back with the following details.
    1.  The full Model No. and Product No. of your notebook - see Here for a guide on locating this information.
    2.  The full version of the operating system you are using ( ie Windows 7 64bit ).
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Sound on iPad is not working and I've tried all

    sound on iPad is not working and I've tried all.. Someone HELP me

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
    If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/ts1630
    http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
     Cheers, Tom

  • My sound on FaceTime is not working after downloading iOS 6 ??

    Ever since I have downloaded iOS 6 when I am on a FaceTime call nobody can ever hear me. Has anyone else had sound problems since the new update ??

    Re: My sound on FaceTime is not working after downloading iOS 6 ?? 
    Apr 8, 2013 12:16 AM (in response to B69B69)
    same issue here... And a restore didn't do any good either.
    Try backing up your information to iTunes, and Restore your devices as new with no content on it what-so-ever. If the issue persists after that, this may be a hardware issue. Check your Mic's for debris, and remove the case you have on the device as well to see if you have the same results. Then contact Apple Support if all else fails.

  • My sound or camera are not working on my Cinema Display since upgrade to Yosemite

    My sound or camera are not working on my Cinema display since Yosemite clean upgrade. Running Mac Mini running 1010.1 Yosemite Late 2009 model with Intel 2.53Ghz Core 2 Duo with 4 Gig of memory Apple LED Cinema Display 27 Inch with NVIDIA GeForce 9400 256 MB graphics.
    Could anybody help?
    No Option to pick on Sound, photo booth saying no camera connected.

    Fixed. Cleaned out the USB connector and all seemed fine.

  • How to fix keyboard clicks and lock sounds when they are on in setting , sounds and still do not work?

    How to fix keyboard clicks and lock sounds when they are on in setting , sounds and still do not work?

    Double-click the Home button and swipe the Task Bar to the right. Check Volume and Mute Settings.
    Message was edited by: Diavonex

  • The sound's wheel is not working in my laptop

    Hello:
    I just installed Arch.
    I followed the Beginner's Guide. Installed ALSA, etc.
    I downloaded Amarok, but when I'm listening to music, and I scroll the wheel that regulates the music in my laptop, it does not work.
    I must do any additional thing?
    Thank you very much.

    gromlok wrote:
    Hello, I'm using XFCE, and In the Mixer opion, in Multimedia, I made visile the Master control, with the vertical lines for volume, but when I move the wheel It does nor work, nor in Amarok!! I don't have a similar option in my settings in XFCE.
    Do you know what else could I do?
    Thank you.
    I don't know XFCE so i can't say you how to set shortcuts, but you can use this method to configure the wheel.
    First of all open xev. On the square move left/right your wheel and take note of buttons number, then you could install xbindkeys from extra then edit/create .xbindkeys file in your home.
    I.E
    # Volume Decrease
    "amixer -c 0 sset Master 1- unmute cap"
    c: ### write here the code recived from Xev
    # Volume Increase'
    "amixer -c 0 sset Master 1+ unmute cap"
    c: ### write here the code recived from Xev
    now run xbinkeys. To set permanently  put xbindkeys in autostart
    Last edited by thepasto (2010-04-29 16:49:39)

  • Internal Speaker Laptop NOT WORKING

    Hi Guys,
    I have problem with my laptop that is HP Compaq 510, OS: window 7 Ultimate 64-bit. 
    My speaker internal laptop is not working. However, for speaker output to headphone jack is working. So, it will be grateful if anyone can give solution and suggestion for this problem.
    Thank in advance
    Beezs

    Hi,
    Since the headphone is working,its not a problem with the OS or the sound drivers on the computer.
    Check the volume.
    For me it looks like a Hardware issue. Contact the HP Service center if the computer is in warranty. They will fix this issue for you
    Regards
    MathewT
    **Click on the KUDOS Star on the left to say "thanks" for helping!**
    **Please Mark a Reply "Accept As Solution" if this has resolved your issue.**
    I Work On Behalf Of HP

  • KeyBoard Sound A505-S6980​3 not work!

    It does not work the keys to the sound of keyboard Satellite A505-S69803 Laptop!
    What can I do???
    I have windows ultimate 64 bit.
    Thanks!

    Found it out... There are some core programms, and with those you can unplug the keyboard, replug and start this core process... and voilá the keybard works a a charm!

  • MacBook Pro Boot Camp Sound Audio Drivers Do Not Work with Miscrosoft Vista

    I installed Vista via Boot Camp on my new 15" i7 MacBook Pro. After full MS Vista patching and Apple Boot Camp driver installation, the sound/audio does not work.
    After some searching on the net, I've noticed that this is perhaps a widespread problem. Are there any solutions or an indication of when this will be fixed?

    When you mean no sound, do you get the volume slider but nothing comes out or do you not get the volume slider at all?
    Go to control panel, sound (you might need to switch to classic view to see the one im on about), then the "sounds" tab, there should be audio clips that you should be able to play, if the laptop has picked up the sound controller in it.
    If you cant play these (greyed out) then the driver isnt installed properly.
    There should be a update option in the boot camp program that is installed in your vista partition, run that, and if it fails you can try what is below.
    Try going into device manager, uninstall/remove the drivers under the heading "sound, game and audio controllers" reboot the machine and it should install them back in again.
    If it doesnt and asks for a disc, then they'll be on your max os x disc, but not sure you can install drivers individually this way. might have to reinstall the boot camp drivers from scratch.
    Ive had this proplem on PC's (not macs) with drivers from manufacturer of the machines not working after windows updates. Fixed by using drivers from the audio controller manufacturer. But dont think its the same issue you are having.

  • Wired printer on an airport express from laptop not working

    Hi,
    Bougth an aiport express 2 weeks ago to replace a cisco linksys that suddenly stop working, the set up was very easy and wifi network is up and running, some devices are connected to the main network and some have issues doing it, particularly a mac laptop and a windows laptop, I created a guess network for these devices to access internet and that solved the problem however those two computers are the ones that need to print and because they are on the guess network sounds like that is not possible.
    The lan port IP address on the airport is 10.0.1.1 so I assigned that IP address to the printer but somehow it doesnt work.
    I had been disable and enable the credentials on the windows laptop but I'm kind of loss here.
    Any ideas?
    Thanks,

    Although your post does not mention how the scanner is connected, my guess would be that you have it connected to the USB port on the AirPort Express. Is that correct?
    If yes, unfortunately, the USB port on the AirPort Express does just what Apple says it will do.....print. Other advanced functions like copy, scan, maintenance, etc are not supported.
    If you need to scan a document, you will need to connect the scanner directly to your computer.

  • No sound and audio device not working properly, T61 vista

    I unistalled the audio device SoundMax integrated HD audio because I had problems getting the mic of my new webcam (Logitech pro 9000) to work. But after reinstalling the SoundMax audio driver the audio device is no longer working.
    Installing the SoundMax driver doesn't report any problems and the device manger also says that the SoundMax integrated digital hd audio device is working properly. But the speaker icon on the taskbar is crossed out. When hovering the mouse over the speaker icon it says Volume: 0 SoundMax integrated digital hd audio. When opening the Volume Mixer it says "No audio decivice is installed"...
    I've completly removed all drivers and reinstalling several times but I cannot get it to work so I really need some help now.
    All software + drivers regarging the webcam has been completly removed.
    System data:
    T61, Vista business
    Audio chip seems to be a Analog Devices 1984
    SoundMax driver version 6.10.1.5510 (latest available from lenovo)

    Really silly bug, but there are times with the T series laptops, specifically the T61s that seem to not project the sound through the speakers and the way to fix it is to just keep hitting the silver volume buttons up by your power button on the actual laptop.  This may or may not work for you, but I literally just got done with this on a T61 running a fresh installation of XP.  The buttons on the lenovo itself control the direct signal input and do a very poor job with integrating with Windows Vista and XP.
    Let me know if that works for you.

  • Itunes on laptop not working after update to ipad2

    I am running the latest version of iTunes on my laptop which is running Windows 7. I updated my iPad Air 2 for ios8. After that, I went to play a song in iTunes and it wouldn't play. iTunes will not work now. Help!

    Hello there alemaa2008,
    It sounds like you are unable to use iTunes after updating your iOS devices. I would recommend the troubleshooting in the following article to help resolve the issue:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues - Apple Support
    If that does not fix it, can you ellaborate what is happening when you try to play a song?
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

Maybe you are looking for