Sound on itues/quick time stopped working

While podcasts and audio files still play, after 5 months of working fine the audio on my iTunes videos do not work. The files begin to play without any sound and then just repeat the first bit of sound over and over.
This seem to happen a day or so after updating to the latest iTune.
I reinstalled iTunes twice and uninstalled and red installed QT on its own twice. Still same problem. The help files on here mentioned installing while in "Safe Mode" but this is in fact not possible. Any ideas? Thanks!
PC Windows XP

I updated the sound drivers, but not with removing and reinstalling, so I'll try that next and report. The computer is 4.5 years old. It came with Windows XP, and has all the updates, including the optional ones, the autmatic update system has identified. What specifications would you like to know? It is using an AMD processor (not at home now to check the name) of over 1 gig and has 512mb of RAM. Soundblaster Audigy is the name of the sound card (it doesn't give a specific name like Augidy 1, silver or gold, etc. to, it just says Audigy).
Thanks!

Similar Messages

The sound on my laptop has stopped working entirely, with and without headphones. What should I do?

The sound on my computer has stopped working. I have searched through countles google entries to try and figure out the problem but I can't find anything remotely useful. I never spilled any liquid or anything on my computer. I was just searching through youtube and when I clicked a video there was no sound. Then I checked iTunes and tried to play some music, still no sound. I played around with the preferences and volume control, still no sound. If you have any advice please help. Going to the apple store is so expensive and I don't have the time or money.

Did you try resetting PRAM and SMC?
Is there any red light visible in the headphone port?

"Sound Blaster Control Panel has stopped working" upon launch - (Sound Blaster Z)

I can't load the Sound Blaster Z Control Panel. I get this error every time:
"Sound Blaster Control Panel has stopped working."
I have windows 7 x64 and a fresh install of SBZ_CD_L13_1_00_28 for my Sound Blaster Z.
Faulting application name: SBZ.exe,
version: 2.15.4.0,
time stamp: 0x5473000d
Faulting module name: KERNELBASE.dll,
version: 6.1.7601.18409,
time stamp: 0x53159a86
Exception code: 0xe0434f4d
Fault offset: 0x0000c42d
Faulting process id: 0x%9
Faulting application start time: 0x%10
Faulting application path: %11
Faulting module path: %12
Report Id: %13
System
Provider
[ Name]
Application Error
EventID
1000
[ Qualifiers]
0
Level
2
Task
100
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2015-03-14T14:36:43.000000000Z
EventRecordID
29541
Channel
Application
Computer
Arin-PC
Security
EventData
SBZ.exe
2.15.4.0
5473000d
KERNELBASE.dll
6.1.7601.18409
53159a86
e0434f4d
0000c42d

Originally Posted by dinopkk
Hi Arin, did you try step 9 of the first link to repair your installation of Windows? Here is the link that tells us how to repair Windows 7 with the startup repair.
I haven't yet. I'll dust off the old CD-Rom drive and plug it in to give this a try.
Thank you!

My click sounds and ringer sounds on my iphone4 just stopped working....what can i do to fix it?

my click sounds and ringer sounds on my iphone4 just stopped working....what can i do to fix it?

Is the mute button on the side of the phone switched on?
Also go to settings, scroll to the bottom and ensure that "Keyboard Clicks" is set to on. Make sure that the "Ringer and Alerts" volume is not set at zero in this menu.

I have Macbook Pro OS 10.8.3 but no Quick Time that works?

I have Macbook Pro OS 10.8.3 but no Quick Time that works?

I am not aware that iTunes for the Mac ever supported satellite radio.
Sirius / XM has an iOS app, not to be confused with satellite radio: https://itunes.apple.com/us/app/siriusxm-internet-radio/id317951436
To see iTunes Radio stations, select the Radio button:
To keep a radio station in the Sidebar, make a playlist:

Quick Time player cannon be opened because of a problem. Check with developer to make sure Quick Time player works with this version of Mac OS X

"Quick Time Player cannot be opened because of a problem" Futher noted - Check with developer to make sure Quick Time player works with this version of Mac OS X. The player had been working fine on my iMac 24, even after upgrading to Lion. Now, nothing but this message. This involves Quick TIme Player version 10.0. Could upgrading to the 'Pro' version be worthwhile? Can't find anything on support that comes close to answering this perplexing situation.
Thanks,

QuickTime Player 10.0, if that's what you have, is indeed too old for Lion which should have QuickTime Player 10.1. Check your system to see if perhaps you have two copies of QuickTime Player, something quite possible if you moved or renamed QuickTime Player before upgrading.
Hope this helps.

Quick time not working in safari after downloading flip4mac

Quick time is not working in safari after downloading flip4mac. How do I get quick time to work within safari? It was working prior to flip4mac being installed but I need flip4mac for some websites.

Hi
Go to System Preferences>Flip4Mac>Browser
Make sure the first two boxes are checked. Check the 3rd box if you want the QT controller to be displayed.
Restart Safari
Post back

Hello i can't open applications of my iPhone in iTunes , other ones (information, photo , books etc) open without problem. i've synchronized phone with iTunes - was no problem, quick time is works. thank u

hello
i can't open applications of my iPhone in iTunes , other ones (information, photo , books etc) open without problem. i've synchronized phone with iTunes - was no problem, quick time is works. thank u
Tatyana

You have Acrobat Pro on your system. It will try to open PDFs, and of course it will fail. You must uninstall it. Then, you will need a PDF reader. So install Adobe Reader. That seems quite simple, but perhaps something is wrong. If anything goes wrong with these two steps (1) uninstall Acrobat Pro (2) install Adobe Reader, then please let us know the details.

Portege - Reel Time stop working with Adobe Reader X

When I installed adobe reader x (to replace adobe reader 9) reel time stopped working - any advice as to how to install reader x without affecting reel time?

Hi profpgsmith,
Probably you must update Toshiba Reel Time as well?! After Adobe Reader X installation I would update Reel Time too that can be downloaded on official Toshiba website.
Furthermore I would also run CCleaner that is a freeware cleaner to delete old registry keys and keep the registry clean.

How do I uninstall firefox 4 and use the previous version. I do lots of work related tasks that require quick time to work and it doesn't with ff4.o.

Quick time crashes and I have lost almost all sounds/video sound capability with the new ff4.0. I want to remove it and replace it with the previous version until the bugs are fixed.

Maybe wait another day because Firefox 5.0 will be released on June 21 and maybe that version works better.
* Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
* Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
Make sure that you allow the plugin-container process in the firewall and other security software.
See also:
* [[No sound in Firefox]]
* [[Video or audio does not play]]
You can click the Volume icon on the Windows Taskbar near the clock and click the Mixer link at the bottom to open the mixer.<br />
You can adjust the volume level for each application in that window, so make sure that Firefox is not muted or set at a low level.<br />
You will only see the Firefox program in the Mixer if you are on a website that plays sound.<br />
Also check the volume setting for the plugin-container process.<br />

Sound Blaster SB0100 5.1 stopped work

My , most of the time I keep the sound
turned off so dont have any idea when it stopped working, it worked before without
issues any ideas what or where to start checking, I assume their is some sort of
process of elimination process I can use.
When I turn on and off the remote volume switch I can hear the amp power up
and shut off, everything is plugged in.
Speakers are Inspire 5. 5300
Thanks in advance

Try connecting a set of headphones to the back of the card, in the line output (disconnect the speakers from that output). That'll help determine if it's the soundcard that has stopped working, or the speakers.
Go into the Mixer (should be in the System Tray, bottom right hand corner) and make sure the main volume isn't muted. If you have a keyboard with media control on it, someone may have accidentally muted the volume by pressing a mute button on that keyboard.
Make sure the card is selected correctly in Control Panel > Sounds and Audio Devices. It should be set as the preferred device (for both playback and recording).
Cat

No Sound - Audio Output Device has stopped working

Hi.
I've recently bought a new HP Pavilion 15 Notebook PC Product Number F4T62EA#ABU with Windows 8 64-bit. The audio device is a Realtek High Definition Audio device.
All was working fine until a few days ago when the audio device stopped working. Here is the device status:
"Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)".
I've tried to update the driver for the device but it is already up to date. Can anyone let me know how this can be fixed please?

Hi mailman1326,
Welcome to the HP forum!
Thank you for your inquiry, I am happy to help!
I understand that you are getting the error "Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)".
Have you made any changes? Did you update to Windows 8.1?
Here is a link to the software and driver page for you computer. HP Pavilion 15-n098sa Notebook PC Drivers. You can use Windows restore to go back in time to when it was working correctly. Using Microsoft System Restore (Windows Vista). You can do a Performing an HP System Recovery (Windows 8) to restore back to factory. You could also run the built in troubleshooter to help.
Follow these steps
a. Press Windows key + C to open charms
b. type in troubleshoot sound
c. select troubleshoot sound on computer and follow the on screen prompts.
Another suggestion is to run the HP Support Assistant. Please let me know the results.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Pre time stops "working" when screen dims/locks

the time on my pre stops "working" when the screen dims/turns off - what i mean by this is that when I wake up the phone the "old" time (time that i last had the phone awake) displays and then quickly updates to the current time.
The worst part about this is that alarms will not work because it does not know the real time when the screen is off!!
If the phone is on the touchstone everything works fine
can anyone help!!!?
thanks, Gavin
Post relates to: Pre p100eww (Sprint)

Hello Gavin and welcome to the Palm forums.
What trouble shooting steps have you tried so far? Have you tried restarting the phone? Reloading webOS using the webOS Doctor tool?
Alan G

No image, just sound - also for Quick Time questions

Hey everybody!!
I am editing a movie on Final Cut Pro, and I use Quick Time Pro to capture the clips and source them to FCP. The type of recorder I am using is an HDV, and up to a couple of days ago, things ran smoothly.
Then I started having problems with my Mac, of a different kind, and I had a friend of mine RESTORE my system. After that, I can't work on my film anymore, cause the Quick Time files from Capture Scratch only play sound, and have a blank screen. Every time I try to open them a window box appears, telling me that Quick Time is missing some components, and cannot play the clips properly. I tried downloading most of these programms, like Divx and On2, but the clips still can't play. I also tried erasing and re-installing Quick Time, but this doesn't seem to work either.
I must have edited and delivered this video by tommorow, so what do I do??
Please advise.
Thanks.
Stef.

First, you should NOT be capturing your clips via QT Player - use FCP itself to capture. Otherwise you have no logging information. This is bound to create problems for you, and today's issue could be a byproduct of this workflow.
Second, once your system was restored and updated, the system and FCP software versions are almost certainly different. Different versions of software produce different results, and one possible outcome is that you cannot view clips, as the codecs have changed. So - what version of OSX and FCP were you using before the restore, and what versions are you using now?

How do I get Quick Time to work on my computer again?

Apparently I am old and a dummy and it seems I accidentally uninstalled Quick Time from my computer instead of uninstalling something else that I was intending to uninstall. How can I get Quick Time back? I've tried the download from the apple.com site, but it never shows up in a file other than some binary file and I don't have the option to "run" after download, just save to this binary file. PLEASE can someone help me? THANKS in advance for any and all help.

Hi 1 olddummy,
Welcome to the Support Communities! First of all, you are not old or a dummy. I'm sure you can give me hundreds of examples of things you can do because of your knowledge and experience, so give yourself a break . I just want to clarify .... are you using a Windows computer or a Mac? I'm going to assume Windows and include an article for you that will explain how to delete the iTunes application and all of it's components (because Quicktime is tied to this program). This will not affect your iTunes library, only the application itself. Once that is done, you should be able to work with Quicktime again.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
Cheers,
- Judy

Sound on itues/quick time stopped working

Similar Messages

Maybe you are looking for