Sound On Page Enter Stutters A Few Times...

I made a page transition thing with Tween and added sound. I
used this script to make it play the tween when I enter any page..
The problem is that when I enter a page I want the tween to
start on frame 70. It plays the sound but somtimes it sort of
sounds like its playing 2 or 3 of the sounds at the same time (
only for a few milliseconds though. It sort of stutters for the
first .2 seconds ) then plays through fine. This problem dosnt
happen on all pages. I made sure i am not playing the sound
anywhere else at any time when you click on that frame but i cant
find whats causing it. Also, this dosnt happen every time, if I
click the home link it will do it, then if I click it again it
might not... Another problem is sound inconsistency, somtimes when
I click on a link it plays the sound much louder then it did before
and this also seems to be on a random basis.
Also, my tween works fine. If I just play the tween its
exactly as I want it ( also it plays the tween from frame 70 every
page but it dosnt stutter on some ).
And yes i did the "stop();" in the first frame.
Whats wrong? Thanks

I sort of know whats going on but i cant fix it. I have the
motion and the sound all in one tween. For some reason when I put
the tween onto the frame and remark out my code that says to play
it. It dosnt play the motion but it STILL plays the sound... So the
reason its studdering is because its playing the sound when it gets
to the frame, then its playing it AGAIN when i actually code it to
play the tween. I searched ALL of my layers and such for anything
that may be making this sound play but i have no idea why its
playing. Why is it automatically playing one part of the tween when
im NOT even calling it? Thanks

Similar Messages

  • On my iPhone 4S, my headphones are not plugged in and yet I still have no sound out of the phone receiver. I've reset the phone a few times and still the same thing. HELP?

    On my iPhone 4S, my headphones are not plugged in and yet I still have  no sound from the phone receiver. I have reset my phone a few times and it still tells me when I push the volume buttons that it is my headphone volume. I have even tried turning off my  Bluetooth setting and it still tells me that my headphones are where the volumes is. AHHHH!!!! I can not talk on my phone unless I use my blue tooth. Nothing is coming out of the receiver of the phone. HELP !!!!

    Hi LittleBuffalo!
    I have an article here that describes your issue and can provide you with some more troubleshooting steps:
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • After prompted to update 10.9.1, my MacBook Pro updates and went thru restart but failed...I tried to start my book and gray screen, Apple logo both on, chime sounded, then went to progress bar, less than half macbook shuts down...did few times, same!!

    After prompted to update 10.9.1, my MacBook Pro updates and went thru restart but failed...I tried to start my book and gray screen, Apple logo both on, chime sounded, then went to progress bar, less than half macbook shuts down...did few times, same!!
    Go to system repair, there is a prompt that cannot repair live etc....I don understand!!! Help, I need the book for work tomorrow!!

    Thanks clintonfrombirmingham...
    After clicking "repair disk" it says DISK UTILITY STOPPED REPAIRING MACINTOSH HD, DISK UTILITY CAN't REPAIR THIS DISK. BACK UO AS MANY OF YOUR FILES AS POSSIBLE, REFORMAT THE DISK, AND RESTORE YOUR BACKED -UP FILES....
    written in red: ERROR: DISK UTILITY CAN'T REPAIR THIS DISK,,,DISK, AND RESTORE YOUR BACKED-UP FILES.
    how can I back up when I cannot even start my macbook? I am stuck here and have lots of important files in the hd... Please help me? Thanks you!

  • Does your iPhone disable for 24 hours when failing a few times to enter your passcode?

    Does your iPhone disable for 24 hours when failing a few times to enter your passcode?

    Hello Hayema0,
    After reviewing your post, I have located an article that can help with iOS passcodes. It contains a number of troubleshooting steps and helpful advice for the issue you are experiencing:
    About iOS passcodes - Apple Support
    Forget your passcode?
    If you or someone else enters the wrong passcode too many times, your device will disable itself temporarily. Get help if you forgot your passcode or your device is disabled.
    Learn what to do if you forgot your Restrictions passcode.
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • After upgrade to ios7, few time i am having problem with my sound/speaker with terroble sound effect like machine or something.but after restart it will be fine.but how this thing can be fix? Because i never had this problem before upgrade to ios7.tq

    After upgrade to ios7, few time i am having problem with my sound/speaker with terroble sound effect like machine or something.but after restart it will be fine.but how this thing can be fix? Because i never had this problem before upgrade to ios7.tq

    Try going into your settings and 'reset all settings'
    You will need to retweak your device but it's been said to help with sound issues.

  • My IPad sound keeps turning off. I have checked all the settings nd they are ok. I have to reset it all the time. It is very frustrating as I use it as an alarm, need I say I've waken late a few times.

    My IPad sound keeps turning off. I have checked all the settings nd they are ok. I have to reset it all the time. It is very frustrating as I use it as an alarm, need I say I've waken late a few times.

    I'm having the same problem?

  • I choose to save and quit when I close Firefox, but recently my pages dissapear on new session for few times. Is the new version unstable?

    I choose to 'save and quit' when I close Firefox, but recently my pages disappear on new session for few times. After I reopen firefox, it's only my default homepage left, all my other pages that I previously save before closing firefox are all gone. It has happened for a few times with this new version, which I do not have this kind of problem before with other version. I wonder is this version unstable? Or is there any other way to deal with it? Thanks!

    You should update to Firefox 3.6.13. See Help > Check for Updates.
    If you use [[Clear Recent History]] to clear the 'Browsing History' when you close Firefox then restoring tabs from the last session ("Save & Quit" or "Show my windows and tabs from last time") doesn't work.
    * http://kb.mozillazine.org/Session_Restore

  • Clicks don't work after few times on same shopping page

    When shopping on a page I can only successfully click 2 or 3 times & then I have to refresh before clicks work again! It used to be fine until recently. I did get my screen repaired & wondered if that would affect it.  Can anyone pls help?

    Yes would have been whole screen as about a quarter of it was shattered when it slipped out of my hands. I didn't get it fixed for a while & didn't have any issues with it broken. But why would it work few times on certain page & then "jam"?

  • I keep getting an error window saying that this URL is invalid and cannot be loaded. If I exit this window the page loads or the error message reappears a few times then the page loads. Frustrating. Started about 9 months ago.

    This only seems to happen using FF3.6.6, not IE.
    The page will eventually load but it may need this error closed a few times. Some pages load without problems. I'm using XP SP3 on an Intel Core 2 Duo E8400 3Gb.
    Also after a recent FF update on an Apple MacPro 8 core (about 2-3 months ago) , OS10.5 - I keep being asked to approve the use of a couple of fonts despite ticking "do not ask again"....

    * "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    * "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]
    * [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    * Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

  • Firefox crashes when I close an e mail on AOL also it crashed once after printing some pages from my banking statement. Any ideas. I restarted a few times without any change to the crashing problem. WHat do you suggest.

    Firefox crashes when I close an e mail on AOL also it crashed once after printing some pages from my banking statement. Any ideas. I restarted a few times without any change to the crashing problem. What do you suggest.
    I am using Mozilla Beta 4. I volunteered to try it out. It's lightning fast. I really love using it. I see there is a new version of Firefox should I download it??

    I HAVE NOW SOLVED THE PROBLEM BY RUNNING WINDOWS REGISTRY REPAIR TOOL WHICH HAS OBVIOUSLY REPAIRED CORRUPT REGISTRY FILES.

  • When i start Firefox ( 5.0.1 ) it loads the home page fine but along with it, it starts playing a video i watched earlier on youtube and it is invisible ( no where in tabs ) and i can just hear the sound. After playing the video one time it stops.

    When i start Firefox ( 5.0.1 ) it loads the home page fine but along with it, it starts playing a video i watched earlier on youtube and it is invisible ( no where in tabs ) and i can just hear the sound. After playing the video one time it stops.

    Sorry you are having problems. First of all try Fifrefox's safemode.
    *[[Troubleshoot Firefox issues using Safe Mode]]
    If that works post back for further advice.
    Next step, if safe mode did not work.
    <u>First: Try a clean install, <sub>(you have had a none standard version installed previously)</sub></u><br /> that involves deleting the program files. Then if necessary try troubleshooting by creating and using a clean empty Firefox profile.
    See
    * this recent post [/questions/940399#answer-377134]
    * http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
    <u>Second: try a New Profile</u>
    *http://kb.mozillazine.org/Profile_Manager#Creating_a_new_profile
    * this will be an additional profile, it is still worth backing up any existing or currently working profile on a regular basis
    **[[Back up and restore information in Firefox profiles]]
    * Until you are absolutely confident about the repercussions I suggest
    ** always use an empty folder when creating a new profile
    ** never delete or rename profiles, just disable or remove shortcuts
    ** after creating a new test profile open it and check for any addons or plugins that may be have been included by default

  • GNOME 3 kicks out to gdm a few times a day at random

    Hi all,
    My Arch installation has been working swimmingly until roughly ten days ago. Since that time, my session in GNOME will - for lack of a better phrase - crash and kick me back to the gdm login screen. I thought it may have something to do with flashplugin, but the last few times it has happened, I have either been on pages that had no flash on it or was working on e-mail. I also thought that perhaps it had to do with whether I was plugged into power or not, but thus far this kicking me off GNOME problem has been an equal opportunity offender.
    Thanks everyone for your help.
    Czar.

    Sorry for the length of this post, but this is the output of my dmesg (man, I hope scrollbars are created on this thing):
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 2.6.39-ARCH (tobias@T-POWA-LX) (gcc version 4.6.0 20110603 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Jun 7 05:49:02 UTC 2011
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
    [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 00000000de44a000 (usable)
    [ 0.000000] BIOS-e820: 00000000de44a000 - 00000000de64a000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000de64a000 - 00000000dfd3f000 (usable)
    [ 0.000000] BIOS-e820: 00000000dfd3f000 - 00000000dfdbf000 (reserved)
    [ 0.000000] BIOS-e820: 00000000dfdbf000 - 00000000dfebf000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000dfebf000 - 00000000dfef6000 (ACPI data)
    [ 0.000000] BIOS-e820: 00000000dfef6000 - 00000000dff00000 (usable)
    [ 0.000000] BIOS-e820: 00000000f7000000 - 00000000f8000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
    [ 0.000000] BIOS-e820: 0000000100000000 - 0000000110000000 (usable)
    [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
    [ 0.000000] DMI 2.6 present.
    [ 0.000000] DMI: Hewlett-Packard HP G42 Notebook PC/1444, BIOS F.27 02/16/2011
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] last_pfn = 0xdff00 max_arch_pfn = 0x100000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-EFFFF write-through
    [ 0.000000] F0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
    [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
    [ 0.000000] 2 base 0000C0000000 mask FFFFE0000000 write-back
    [ 0.000000] 3 base 0000FFE00000 mask FFFFFFE00000 write-protect
    [ 0.000000] 4 base 000100000000 mask FFFFF0000000 write-back
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] TOM2: 0000000120000000 aka 4608M
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] initial memory mapped : 0 - 01c00000
    [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
    [ 0.000000] 0000000000 - 0000400000 page 4k
    [ 0.000000] 0000400000 - 0037400000 page 2M
    [ 0.000000] 0037400000 - 00377fe000 page 4k
    [ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
    [ 0.000000] RAMDISK: 7fe3b000 - 7fff0000
    [ 0.000000] Allocated new RAMDISK: 37649000 - 377fd90c
    [ 0.000000] Move RAMDISK from 000000007fe3b000 - 000000007ffef90b to 37649000 - 377fd90b
    [ 0.000000] ACPI: RSDP 000fe020 00024 (v02 HP )
    [ 0.000000] ACPI: XSDT dfef5120 0005C (v01 HPQOEM SLIC-MPC 00000003 01000013)
    [ 0.000000] ACPI: FACP dfef4000 000F4 (v04 HP 1444 00000003 MSFT 01000013)
    [ 0.000000] ACPI: DSDT dfee2000 0E1CE (v01 HP 1444 F0000000 MSFT 01000013)
    [ 0.000000] ACPI: FACS dfe9b000 00040
    [ 0.000000] ACPI: HPET dfef3000 00038 (v01 HP 1444 00000001 MSFT 01000013)
    [ 0.000000] ACPI: APIC dfef2000 00084 (v02 HP 1444 00000001 MSFT 01000013)
    [ 0.000000] ACPI: MCFG dfef1000 0003C (v01 HP 1444 00000001 MSFT 01000013)
    [ 0.000000] ACPI: BOOT dfee1000 00028 (v01 HP 1444 00000001 MSFT 01000013)
    [ 0.000000] ACPI: SLIC dfee0000 00176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
    [ 0.000000] ACPI: SSDT dfedf000 0052A (v01 AMD POWERNOW 00000001 AMD 00000001)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] 2695MB HIGHMEM available.
    [ 0.000000] 887MB LOWMEM available.
    [ 0.000000] mapped low ram: 0 - 377fe000
    [ 0.000000] low ram: 0 - 377fe000
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] Normal 0x00001000 -> 0x000377fe
    [ 0.000000] HighMem 0x000377fe -> 0x000dff00
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] early_node_map[4] active PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009f
    [ 0.000000] 0: 0x00000100 -> 0x000de44a
    [ 0.000000] 0: 0x000de64a -> 0x000dfd3f
    [ 0.000000] 0: 0x000dfef6 -> 0x000dff00
    [ 0.000000] On node 0 totalpages: 916184
    [ 0.000000] free_area_init_node: node 0, pgdat c14a3980, node_mem_map f5a48200
    [ 0.000000] DMA zone: 32 pages used for memmap
    [ 0.000000] DMA zone: 0 pages reserved
    [ 0.000000] DMA zone: 3951 pages, LIFO batch:0
    [ 0.000000] Normal zone: 1744 pages used for memmap
    [ 0.000000] Normal zone: 221486 pages, LIFO batch:31
    [ 0.000000] HighMem zone: 5391 pages used for memmap
    [ 0.000000] HighMem zone: 683580 pages, LIFO batch:31
    [ 0.000000] Using APIC driver default
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x1002a201 base: 0xfed00000
    [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    [ 0.000000] Allocating PCI resources starting at dff00000 (gap: dff00000:17100000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 12 pages/cpu @f5400000 s27648 r0 d21504 u1048576
    [ 0.000000] pcpu-alloc: s27648 r0 d21504 u1048576 alloc=1*4194304
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 909017
    [ 0.000000] Kernel command line: root=/dev/disk/by-uuid/7dc044eb-f59c-4133-b622-652e97db0d05 ro
    [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [ 0.000000] Initializing CPU#0
    [ 0.000000] allocated 14675712 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] Initializing HighMem for node 0 (000377fe:000dff00)
    [ 0.000000] Memory: 3612652k/3668992k available (3380k kernel code, 52084k reserved, 1394k data, 524k init, 2755884k highmem)
    [ 0.000000] virtual kernel memory layout:
    [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
    [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    [ 0.000000] .init : 0xc14aa000 - 0xc152d000 ( 524 kB)
    [ 0.000000] .data : 0xc134d1bf - 0xc14a9c00 (1394 kB)
    [ 0.000000] .text : 0xc1000000 - 0xc134d1bf (3380 kB)
    [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptable hierarchical RCU implementation.
    [ 0.000000] RCU-based detection of stalled CPUs is disabled.
    [ 0.000000] Verbose stalled-CPUs detection is disabled.
    [ 0.000000] NR_IRQS:512
    [ 0.000000] CPU 0 irqstacks, hard=f400c000 soft=f400e000
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.000000] Detected 2892.585 MHz processor.
    [ 0.003336] Calibrating delay loop (skipped), value calculated using timer frequency.. 5787.21 BogoMIPS (lpj=9641950)
    [ 0.006705] pid_max: default: 32768 minimum: 301
    [ 0.006778] Security Framework initialized
    [ 0.006820] AppArmor: AppArmor disabled by boot time parameter
    [ 0.006880] Mount-cache hash table entries: 512
    [ 0.007089] Initializing cgroup subsys ns
    [ 0.007129] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
    [ 0.007174] Initializing cgroup subsys cpuacct
    [ 0.007222] Initializing cgroup subsys memory
    [ 0.007268] Initializing cgroup subsys devices
    [ 0.007307] Initializing cgroup subsys freezer
    [ 0.007346] Initializing cgroup subsys net_cls
    [ 0.007384] Initializing cgroup subsys blkio
    [ 0.007451] CPU: Physical Processor ID: 0
    [ 0.007490] CPU: Processor Core ID: 0
    [ 0.007529] mce: CPU supports 6 MCE banks
    [ 0.007573] using C1E aware idle routine
    [ 0.008527] ACPI: Core revision 20110316
    [ 0.016674] ftrace: allocating 15225 entries in 30 pages
    [ 0.020060] Enabling APIC mode: Flat. Using 1 I/O APICs
    [ 0.020407] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.054103] CPU0: AMD Phenom(tm) II N640 Dual-Core Processor stepping 03
    [ 0.056663] Performance Events: AMD PMU driver.
    [ 0.056663] ... version: 0
    [ 0.056663] ... bit width: 48
    [ 0.056663] ... generic registers: 4
    [ 0.056663] ... value mask: 0000ffffffffffff
    [ 0.056663] ... max period: 00007fffffffffff
    [ 0.056663] ... fixed-purpose events: 0
    [ 0.056663] ... event mask: 000000000000000f
    [ 0.056663] System has AMD C1E enabled
    [ 0.056663] Switch to broadcast mode on CPU0
    [ 0.073384] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.100033] CPU 1 irqstacks, hard=f40b4000 soft=f40b6000
    [ 0.100036] Booting Node 0, Processors #1
    [ 0.100138] smpboot cpu 1: start_ip = 9b000
    [ 0.006666] Initializing CPU#1
    [ 0.196667] Switch to broadcast mode on CPU1
    [ 0.196787] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.203344] Brought up 2 CPUs
    [ 0.203420] Total of 2 processors activated (11575.87 BogoMIPS).
    [ 0.203796] devtmpfs: initialized
    [ 0.203796] PM: Registering ACPI NVS region at de44a000 (2097152 bytes)
    [ 0.203796] PM: Registering ACPI NVS region at dfdbf000 (1048576 bytes)
    [ 0.204180] print_constraints: dummy:
    [ 0.204257] NET: Registered protocol family 16
    [ 0.204385] node 0 link 0: io port [0, ffffff]
    [ 0.204388] TOM: 00000000e0000000 aka 3584M
    [ 0.204443] Fam 10h mmconf [f7000000, f7ffffff]
    [ 0.204445] node 0 link 0: mmio [a0000, bffff]
    [ 0.204447] node 0 link 0: mmio [e0000000, efffffff]
    [ 0.204450] node 0 link 0: mmio [f0000000, f01fffff]
    [ 0.204452] node 0 link 0: mmio [f0200000, f03fffff]
    [ 0.204453] node 0 link 0: mmio [f0400000, f6ffffff]
    [ 0.204455] node 0 link 0: mmio [f7000000, f7ffffff] ==> none
    [ 0.204458] node 0 link 0: mmio [f8000000, ffdfffff]
    [ 0.204459] TOM2: 0000000120000000 aka 4608M
    [ 0.204495] bus: [00, 1f] on node 0 link 0
    [ 0.204498] bus: 00 index 0 [io 0x0000-0xffff]
    [ 0.204499] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
    [ 0.204501] bus: 00 index 2 [mem 0xe0000000-0xf6ffffff]
    [ 0.204503] bus: 00 index 3 [mem 0xf8000000-0xffffffff]
    [ 0.204511] Extended Config Space enabled on 1 nodes
    [ 0.204555] ACPI: bus type pci registered
    [ 0.204659] PCI: MMCONFIG for domain 0000 [bus 00-0f] at [mem 0xf7000000-0xf7ffffff] (base 0xf7000000)
    [ 0.204700] PCI: MMCONFIG at [mem 0xf7000000-0xf7ffffff] reserved in E820
    [ 0.204736] PCI: Using MMCONFIG for extended config space
    [ 0.204772] PCI: Using configuration type 1 for base access
    [ 0.205076] bio: create slab <bio-0> at 0
    [ 0.205076] ACPI: EC: Look up EC in DSDT
    [ 0.205076] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.206942] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.213406] ACPI: Interpreter enabled
    [ 0.213428] ACPI: (supports S0 S3 S4 S5)
    [ 0.213610] ACPI: Using IOAPIC for interrupt routing
    [ 0.217099] ACPI: EC: GPE = 0x5, I/O: command/status = 0x66, data = 0x62
    [ 0.217254] ACPI: No dock devices found.
    [ 0.217325] HEST: Table not found.
    [ 0.217361] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.217361] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.217676] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    [ 0.217749] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
    [ 0.217786] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 0.217825] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff]
    [ 0.217864] pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff]
    [ 0.217903] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff]
    [ 0.217942] pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cffff]
    [ 0.217981] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
    [ 0.218020] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
    [ 0.218059] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
    [ 0.218098] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
    [ 0.218137] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
    [ 0.218176] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
    [ 0.218216] pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff]
    [ 0.218255] pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff]
    [ 0.218294] pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xf6ffffff]
    [ 0.218333] pci_root PNP0A08:00: host bridge window [mem 0xf8000000-0xfed3ffff]
    [ 0.218372] pci_root PNP0A08:00: host bridge window [mem 0xfed45000-0xffffffff]
    [ 0.218415] pci_root PNP0A08:00: address space collision: host bridge window [mem 0x000cc000-0x000cffff] conflicts with Video ROM [mem 0x000c0000-0x000cedff]
    [ 0.218469] pci 0000:00:00.0: [1022:9601] type 0 class 0x000600
    [ 0.218507] pci 0000:00:01.0: [1022:9602] type 1 class 0x000604
    [ 0.218572] pci 0000:00:05.0: [1022:9605] type 1 class 0x000604
    [ 0.218595] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
    [ 0.218598] pci 0000:00:05.0: PME# disabled
    [ 0.218609] pci 0000:00:06.0: [1022:9606] type 1 class 0x000604
    [ 0.218635] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
    [ 0.218637] pci 0000:00:06.0: PME# disabled
    [ 0.218701] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
    [ 0.218718] pci 0000:00:11.0: reg 10: [io 0x4038-0x403f]
    [ 0.218727] pci 0000:00:11.0: reg 14: [io 0x404c-0x404f]
    [ 0.218735] pci 0000:00:11.0: reg 18: [io 0x4030-0x4037]
    [ 0.218744] pci 0000:00:11.0: reg 1c: [io 0x4048-0x404b]
    [ 0.218752] pci 0000:00:11.0: reg 20: [io 0x4010-0x401f]
    [ 0.218761] pci 0000:00:11.0: reg 24: [mem 0xf0408000-0xf04083ff]
    [ 0.218802] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
    [ 0.218813] pci 0000:00:12.0: reg 10: [mem 0xf0407000-0xf0407fff]
    [ 0.218875] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
    [ 0.219886] pci 0000:00:12.2: reg 10: [mem 0xf0408600-0xf04086ff]
    [ 0.225813] pci 0000:00:12.2: supports D1 D2
    [ 0.225814] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
    [ 0.225818] pci 0000:00:12.2: PME# disabled
    [ 0.225836] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
    [ 0.225847] pci 0000:00:13.0: reg 10: [mem 0xf0406000-0xf0406fff]
    [ 0.225909] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
    [ 0.226652] pci 0000:00:13.2: reg 10: [mem 0xf0408500-0xf04085ff]
    [ 0.232518] pci 0000:00:13.2: supports D1 D2
    [ 0.232519] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
    [ 0.232523] pci 0000:00:13.2: PME# disabled
    [ 0.232540] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
    [ 0.232608] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
    [ 0.232627] pci 0000:00:14.2: reg 10: [mem 0xf0400000-0xf0403fff 64bit]
    [ 0.232678] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
    [ 0.232682] pci 0000:00:14.2: PME# disabled
    [ 0.232692] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
    [ 0.232758] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
    [ 0.232793] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
    [ 0.232804] pci 0000:00:14.5: reg 10: [mem 0xf0405000-0xf0405fff]
    [ 0.233373] pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03
    [ 0.233385] pci 0000:00:16.0: reg 10: [mem 0xf0404000-0xf0404fff]
    [ 0.233446] pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03
    [ 0.234453] pci 0000:00:16.2: reg 10: [mem 0xf0408400-0xf04084ff]
    [ 0.240004] pci 0000:00:16.2: supports D1 D2
    [ 0.240005] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
    [ 0.240009] pci 0000:00:16.2: PME# disabled
    [ 0.240025] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
    [ 0.240038] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
    [ 0.240048] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
    [ 0.240059] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
    [ 0.240071] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
    [ 0.240142] pci 0000:01:05.0: [1002:9712] type 0 class 0x000300
    [ 0.240150] pci 0000:01:05.0: reg 10: [mem 0xe0000000-0xefffffff pref]
    [ 0.240154] pci 0000:01:05.0: reg 14: [io 0x3000-0x30ff]
    [ 0.240158] pci 0000:01:05.0: reg 18: [mem 0xf0300000-0xf030ffff]
    [ 0.240167] pci 0000:01:05.0: reg 24: [mem 0xf0200000-0xf02fffff]
    [ 0.240178] pci 0000:01:05.0: supports D1 D2
    [ 0.240186] pci 0000:01:05.1: [1002:970f] type 0 class 0x000403
    [ 0.240193] pci 0000:01:05.1: reg 10: [mem 0xf0310000-0xf0313fff]
    [ 0.240216] pci 0000:01:05.1: supports D1 D2
    [ 0.240258] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 0.240296] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
    [ 0.240299] pci 0000:00:01.0: bridge window [mem 0xf0200000-0xf03fffff]
    [ 0.240302] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.240342] pci 0000:02:00.0: [14e4:4727] type 0 class 0x000280
    [ 0.240359] pci 0000:02:00.0: reg 10: [mem 0xf0100000-0xf0103fff 64bit]
    [ 0.240425] pci 0000:02:00.0: supports D1 D2
    [ 0.250025] pci 0000:00:05.0: PCI bridge to [bus 02-02]
    [ 0.250068] pci 0000:00:05.0: bridge window [io 0xfffff000-0x0000] (disabled)
    [ 0.250072] pci 0000:00:05.0: bridge window [mem 0xf0100000-0xf01fffff]
    [ 0.250075] pci 0000:00:05.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.250133] pci 0000:03:00.0: [10ec:8136] type 0 class 0x000200
    [ 0.250148] pci 0000:03:00.0: reg 10: [io 0x2000-0x20ff]
    [ 0.250168] pci 0000:03:00.0: reg 18: [mem 0xf0010000-0xf0010fff 64bit pref]
    [ 0.250180] pci 0000:03:00.0: reg 20: [mem 0xf0000000-0xf000ffff 64bit pref]
    [ 0.250189] pci 0000:03:00.0: reg 30: [mem 0xffff0000-0xffffffff pref]
    [ 0.250220] pci 0000:03:00.0: supports D1 D2
    [ 0.250222] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.250226] pci 0000:03:00.0: PME# disabled
    [ 0.260044] pci 0000:00:06.0: PCI bridge to [bus 03-03]
    [ 0.260087] pci 0000:00:06.0: bridge window [io 0x2000-0x2fff]
    [ 0.260089] pci 0000:00:06.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
    [ 0.260093] pci 0000:00:06.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
    [ 0.260152] pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode)
    [ 0.260191] pci 0000:00:14.4: bridge window [io 0xf000-0x0000] (disabled)
    [ 0.260195] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff] (disabled)
    [ 0.260199] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.260201] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.260203] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.260205] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.260207] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
    [ 0.260209] pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
    [ 0.260211] pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
    [ 0.260213] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
    [ 0.260215] pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
    [ 0.260217] pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
    [ 0.260218] pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
    [ 0.260220] pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
    [ 0.260222] pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
    [ 0.260224] pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
    [ 0.260226] pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
    [ 0.260228] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xf6ffffff] (subtractive decode)
    [ 0.260230] pci 0000:00:14.4: bridge window [mem 0xf8000000-0xfed3ffff] (subtractive decode)
    [ 0.260232] pci 0000:00:14.4: bridge window [mem 0xfed45000-0xffffffff] (subtractive decode)
    [ 0.260244] pci_bus 0000:00: on NUMA node 0
    [ 0.260251] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.260419] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
    [ 0.260453] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
    [ 0.260487] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
    [ 0.260542] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
    [ 0.260600] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.260636] Unable to assume _OSC PCIe control. Disabling ASPM
    [ 0.264177] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [ 0.264630] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [ 0.265080] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [ 0.265528] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [ 0.265966] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [ 0.266395] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [ 0.266804] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [ 0.267232] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
    [ 0.267705] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.267749] vgaarb: loaded
    [ 0.267846] PCI: Using ACPI for IRQ routing
    [ 0.267882] PCI: pci_cache_line_size set to 64 bytes
    [ 0.267952] reserve RAM buffer: 000000000009f800 - 000000000009ffff
    [ 0.267954] reserve RAM buffer: 00000000de44a000 - 00000000dfffffff
    [ 0.267957] reserve RAM buffer: 00000000dfd3f000 - 00000000dfffffff
    [ 0.267959] reserve RAM buffer: 00000000dff00000 - 00000000dfffffff
    [ 0.268043] NetLabel: Initializing
    [ 0.268082] NetLabel: domain hash size = 128
    [ 0.268117] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.268162] NetLabel: unlabeled traffic allowed by default
    [ 0.268208] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [ 0.268368] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
    [ 0.270010] Switching to clocksource hpet
    [ 0.276147] Switched to NOHz mode on CPU #1
    [ 0.276157] Switched to NOHz mode on CPU #0
    [ 0.277558] pnp: PnP ACPI init
    [ 0.277610] ACPI: bus type pnp registered
    [ 0.277968] pnp 00:00: [bus 00-ff]
    [ 0.277970] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 0.277972] pnp 00:00: [io 0x0d00-0xffff window]
    [ 0.277974] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 0.277976] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
    [ 0.277978] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
    [ 0.277979] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
    [ 0.277981] pnp 00:00: [mem 0x000cc000-0x000cffff window]
    [ 0.277983] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
    [ 0.277984] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
    [ 0.277986] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
    [ 0.277988] pnp 00:00: [mem 0x000dc000-0x000dffff window]
    [ 0.277989] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
    [ 0.277991] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
    [ 0.277993] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
    [ 0.277994] pnp 00:00: [mem 0x000ec000-0x000effff window]
    [ 0.277996] pnp 00:00: [mem 0xe0000000-0xf6ffffff window]
    [ 0.277998] pnp 00:00: [mem 0xf8000000-0xfed3ffff window]
    [ 0.277999] pnp 00:00: [mem 0xfed45000-0xffffffff window]
    [ 0.278001] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 0.278050] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 0.278190] pnp 00:01: [mem 0xfec00000-0xfec00fff]
    [ 0.278192] pnp 00:01: [mem 0xfee00000-0xfee00fff]
    [ 0.278193] pnp 00:01: [mem 0xf7000000-0xf7ffffff]
    [ 0.278195] pnp 00:01: [mem 0xfec10000-0xfec1001f]
    [ 0.278196] pnp 00:01: [mem 0xfed80000-0xfed80fff]
    [ 0.278235] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 0.278277] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
    [ 0.278315] system 00:01: [mem 0xf7000000-0xf7ffffff] has been reserved
    [ 0.278352] system 00:01: [mem 0xfec10000-0xfec1001f] has been reserved
    [ 0.278390] system 00:01: [mem 0xfed80000-0xfed80fff] has been reserved
    [ 0.278427] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.278510] pnp 00:02: [irq 0 disabled]
    [ 0.278518] pnp 00:02: [irq 8]
    [ 0.278520] pnp 00:02: [mem 0xfed00000-0xfed003ff]
    [ 0.278541] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.278567] pnp 00:03: [io 0x0000-0x000f]
    [ 0.278569] pnp 00:03: [io 0x0081-0x008f]
    [ 0.278572] pnp 00:03: [io 0x00c0-0x00df]
    [ 0.278574] pnp 00:03: [dma 4]
    [ 0.278595] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.278601] pnp 00:04: [io 0x00f0-0x00fe]
    [ 0.278608] pnp 00:04: [irq 13]
    [ 0.278628] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.278653] pnp 00:05: [io 0x0070-0x0071]
    [ 0.278674] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.278679] pnp 00:06: [io 0x0061]
    [ 0.278700] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.278706] pnp 00:07: [io 0x0060]
    [ 0.278708] pnp 00:07: [io 0x0064]
    [ 0.278715] pnp 00:07: [irq 1]
    [ 0.278740] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.278748] pnp 00:08: [irq 12]
    [ 0.278774] pnp 00:08: Plug and Play ACPI device, IDs SYN1e1f SYN1e00 SYN0002 PNP0f13 (active)
    [ 0.278782] pnp 00:09: [io 0x0010-0x001f]
    [ 0.278784] pnp 00:09: [io 0x002e-0x002f]
    [ 0.278785] pnp 00:09: [io 0x0072-0x0073]
    [ 0.278787] pnp 00:09: [io 0x0080]
    [ 0.278788] pnp 00:09: [io 0x00b0-0x00b1]
    [ 0.278790] pnp 00:09: [io 0x0092]
    [ 0.278791] pnp 00:09: [io 0x0400-0x04cf]
    [ 0.278793] pnp 00:09: [io 0x04d0-0x04d1]
    [ 0.278794] pnp 00:09: [io 0x04d6]
    [ 0.278796] pnp 00:09: [io 0x0550]
    [ 0.278797] pnp 00:09: [io 0x0680-0x06ff]
    [ 0.278799] pnp 00:09: [io 0x077a]
    [ 0.278800] pnp 00:09: [io 0x0c00-0x0c01]
    [ 0.278802] pnp 00:09: [io 0x0c14]
    [ 0.278803] pnp 00:09: [io 0x0c50-0x0c52]
    [ 0.278805] pnp 00:09: [io 0x0c6c]
    [ 0.278806] pnp 00:09: [io 0x0c6f]
    [ 0.278807] pnp 00:09: [io 0x0cd0-0x0cdb]
    [ 0.278809] pnp 00:09: [io 0x0380-0x0387]
    [ 0.278852] system 00:09: [io 0x0400-0x04cf] has been reserved
    [ 0.278894] system 00:09: [io 0x04d0-0x04d1] has been reserved
    [ 0.278930] system 00:09: [io 0x04d6] has been reserved
    [ 0.278967] system 00:09: [io 0x0550] has been reserved
    [ 0.279004] system 00:09: [io 0x0680-0x06ff] has been reserved
    [ 0.279041] system 00:09: [io 0x077a] has been reserved
    [ 0.279077] system 00:09: [io 0x0c00-0x0c01] has been reserved
    [ 0.279114] system 00:09: [io 0x0c14] has been reserved
    [ 0.279151] system 00:09: [io 0x0c50-0x0c52] has been reserved
    [ 0.279188] system 00:09: [io 0x0c6c] has been reserved
    [ 0.279224] system 00:09: [io 0x0c6f] has been reserved
    [ 0.279261] system 00:09: [io 0x0cd0-0x0cdb] has been reserved
    [ 0.279297] system 00:09: [io 0x0380-0x0387] has been reserved
    [ 0.279335] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.279364] pnp 00:0a: [mem 0x000e0000-0x000fffff]
    [ 0.279366] pnp 00:0a: [mem 0xffe00000-0xffffffff]
    [ 0.279400] system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved
    [ 0.279438] system 00:0a: [mem 0xffe00000-0xffffffff] has been reserved
    [ 0.279476] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.279841] pnp: PnP ACPI: found 11 devices
    [ 0.279881] ACPI: ACPI bus type pnp unregistered
    [ 0.315651] pci 0000:03:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
    [ 0.315711] pci 0000:00:06.0: BAR 14: assigned [mem 0xf0500000-0xf05fffff]
    [ 0.315749] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 0.315786] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
    [ 0.315824] pci 0000:00:01.0: bridge window [mem 0xf0200000-0xf03fffff]
    [ 0.315862] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.315903] pci 0000:00:05.0: PCI bridge to [bus 02-02]
    [ 0.315938] pci 0000:00:05.0: bridge window [io disabled]
    [ 0.315976] pci 0000:00:05.0: bridge window [mem 0xf0100000-0xf01fffff]
    [ 0.316013] pci 0000:00:05.0: bridge window [mem pref disabled]
    [ 0.316052] pci 0000:03:00.0: BAR 6: assigned [mem 0xf0020000-0xf002ffff pref]
    [ 0.316092] pci 0000:00:06.0: PCI bridge to [bus 03-03]
    [ 0.316128] pci 0000:00:06.0: bridge window [io 0x2000-0x2fff]
    [ 0.316165] pci 0000:00:06.0: bridge window [mem 0xf0500000-0xf05fffff]
    [ 0.316203] pci 0000:00:06.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
    [ 0.316244] pci 0000:00:14.4: PCI bridge to [bus 04-04]
    [ 0.316279] pci 0000:00:14.4: bridge window [io disabled]
    [ 0.316318] pci 0000:00:14.4: bridge window [mem disabled]
    [ 0.316356] pci 0000:00:14.4: bridge window [mem pref disabled]
    [ 0.316400] pci 0000:00:01.0: setting latency timer to 64
    [ 0.316409] pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [ 0.316447] pci 0000:00:05.0: setting latency timer to 64
    [ 0.316452] pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 0.316489] pci 0000:00:06.0: setting latency timer to 64
    [ 0.316495] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.316497] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.316499] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.316500] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
    [ 0.316502] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
    [ 0.316504] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
    [ 0.316506] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
    [ 0.316508] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
    [ 0.316509] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
    [ 0.316511] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
    [ 0.316513] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
    [ 0.316515] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
    [ 0.316517] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
    [ 0.316518] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
    [ 0.316520] pci_bus 0000:00: resource 18 [mem 0xe0000000-0xf6ffffff]
    [ 0.316522] pci_bus 0000:00: resource 19 [mem 0xf8000000-0xfed3ffff]
    [ 0.316524] pci_bus 0000:00: resource 20 [mem 0xfed45000-0xffffffff]
    [ 0.316526] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
    [ 0.316528] pci_bus 0000:01: resource 1 [mem 0xf0200000-0xf03fffff]
    [ 0.316529] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.316531] pci_bus 0000:02: resource 1 [mem 0xf0100000-0xf01fffff]
    [ 0.316533] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
    [ 0.316535] pci_bus 0000:03: resource 1 [mem 0xf0500000-0xf05fffff]
    [ 0.316537] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
    [ 0.316539] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
    [ 0.316541] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
    [ 0.316542] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.316544] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000c3fff]
    [ 0.316546] pci_bus 0000:04: resource 8 [mem 0x000c4000-0x000c7fff]
    [ 0.316547] pci_bus 0000:04: resource 9 [mem 0x000c8000-0x000cbfff]
    [ 0.316549] pci_bus 0000:04: resource 10 [mem 0x000d0000-0x000d3fff]
    [ 0.316551] pci_bus 0000:04: resource 11 [mem 0x000d4000-0x000d7fff]
    [ 0.316552] pci_bus 0000:04: resource 12 [mem 0x000d8000-0x000dbfff]
    [ 0.316554] pci_bus 0000:04: resource 13 [mem 0x000dc000-0x000dffff]
    [ 0.316556] pci_bus 0000:04: resource 14 [mem 0x000e0000-0x000e3fff]
    [ 0.316558] pci_bus 0000:04: resource 15 [mem 0x000e4000-0x000e7fff]
    [ 0.316559] pci_bus 0000:04: resource 16 [mem 0x000e8000-0x000ebfff]
    [ 0.316561] pci_bus 0000:04: resource 17 [mem 0x000ec000-0x000effff]
    [ 0.316563] pci_bus 0000:04: resource 18 [mem 0xe0000000-0xf6ffffff]
    [ 0.316565] pci_bus 0000:04: resource 19 [mem 0xf8000000-0xfed3ffff]
    [ 0.316566] pci_bus 0000:04: resource 20 [mem 0xfed45000-0xffffffff]
    [ 0.316600] NET: Registered protocol family 2
    [ 0.316694] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    [ 0.316879] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.317329] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    [ 0.317575] TCP: Hash tables configured (established 131072 bind 65536)
    [ 0.317647] TCP reno registered
    [ 0.317683] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.317726] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.317863] NET: Registered protocol family 1
    [ 0.317910] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
    [ 0.490114] pci 0000:01:05.0: Boot video device
    [ 0.490127] PCI: CLS 64 bytes, default 64
    [ 0.490173] Unpacking initramfs...
    [ 0.514688] Freeing initrd memory: 1748k freed
    [ 0.515245] Simple Boot Flag at 0x44 set to 0x1
    [ 0.515531] apm: BIOS not found.
    [ 0.515656] audit: initializing netlink socket (disabled)
    [ 0.515704] type=2000 audit(1308743681.513:1): initialized
    [ 0.516169] highmem bounce pool size: 64 pages
    [ 0.516212] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [ 0.517973] VFS: Disk quotas dquot_6.5.2
    [ 0.518080] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [ 0.518206] msgmni has been set to 1676
    [ 0.518465] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 0.518586] io scheduler noop registered
    [ 0.518627] io scheduler deadline registered
    [ 0.518683] io scheduler cfq registered (default)
    [ 0.518823] pcieport 0000:00:05.0: setting latency timer to 64
    [ 0.518847] pcieport 0000:00:05.0: irq 40 for MSI/MSI-X
    [ 0.518884] pcieport 0000:00:06.0: setting latency timer to 64
    [ 0.518902] pcieport 0000:00:06.0: irq 41 for MSI/MSI-X
    [ 0.519011] ERST: Table is not found!
    [ 0.519090] isapnp: Scanning for PnP cards...
    [ 0.905771] isapnp: No Plug & Play device found
    [ 0.905867] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 1.146796] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 1.165475] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 1.165538] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 1.165646] mousedev: PS/2 mouse device common for all mice
    [ 1.166976] rtc_cmos 00:05: RTC can wake from S4
    [ 1.187596] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 1.193534] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
    [ 1.193600] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
    [ 1.193659] cpuidle: using governor ladder
    [ 1.193694] cpuidle: using governor menu
    [ 1.193894] TCP cubic registered
    [ 1.193965] NET: Registered protocol family 17
    [ 1.194005] Registering the dns_resolver key type
    [ 1.194060] Using IPI No-Shortcut mode
    [ 1.194147] PM: Hibernation image not present or could not be loaded.
    [ 1.194153] registered taskstats version 1
    [ 1.194540] rtc_cmos 00:05: setting system clock to 2011-06-22 11:54:43 UTC (1308743683)
    [ 1.194609] Initializing network drop monitor service
    [ 1.194712] Freeing unused kernel memory: 524k freed
    [ 1.194928] Write protecting the kernel text: 3384k
    [ 1.194988] Write protecting the kernel read-only data: 1032k
    [ 1.204324] udevd[47]: starting version 171
    [ 1.260794] SCSI subsystem initialized
    [ 1.275550] libata version 3.00 loaded.
    [ 1.281328] ahci 0000:00:11.0: version 3.0
    [ 1.281361] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    [ 1.281530] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
    [ 1.281571] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
    [ 1.281900] scsi0 : ahci
    [ 1.282076] scsi1 : ahci
    [ 1.282781] ata1: SATA max UDMA/133 abar m1024@0xf0408000 port 0xf0408100 irq 19
    [ 1.282822] ata2: SATA max UDMA/133 abar m1024@0xf0408000 port 0xf0408180 irq 19
    [ 1.516765] Refined TSC clocksource calibration: 2892.755 MHz.
    [ 1.516816] Switching to clocksource tsc
    [ 1.766769] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.766833] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 1.768083] ata1.00: ATA-8: Hitachi HTS543232A7A384, ES2OA60W, max UDMA/100
    [ 1.768126] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 1.768979] ata2.00: ATAPI: hp CDDVDW TS-L633R, 0300, max UDMA/100
    [ 1.769495] ata1.00: configured for UDMA/100
    [ 1.769751] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54323 ES2O PQ: 0 ANSI: 5
    [ 1.771693] ata2.00: configured for UDMA/100
    [ 1.775987] scsi 1:0:0:0: CD-ROM hp CDDVDW TS-L633R 0300 PQ: 0 ANSI: 5
    [ 1.784651] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
    [ 1.784729] sd 0:0:0:0: [sda] Write Protect is off
    [ 1.784766] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.784779] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.789953] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 1.789997] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 1.790193] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [ 1.833001] sda: sda1 sda2 sda3 sda4
    [ 1.833374] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 2.446319] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
    [ 4.178200] udevd[232]: starting version 171
    [ 4.550729] ACPI: acpi_idle registered with cpuidle
    [ 4.550817] ACPI: processor limited to max C-state 1
    [ 4.595722] powernow-k8: Found 1 AMD Phenom(tm) II N640 Dual-Core Processor (2 cpu cores) (version 2.20.00)
    [ 4.595758] powernow-k8: 0 : pstate 0 (2900 MHz)
    [ 4.595759] powernow-k8: 1 : pstate 1 (2600 MHz)
    [ 4.595761] powernow-k8: 2 : pstate 2 (1900 MHz)
    [ 4.595762] powernow-k8: 3 : pstate 3 (1400 MHz)
    [ 4.595763] powernow-k8: 4 : pstate 4 (800 MHz)
    [ 4.737934] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    [ 4.738217] ACPI: AC Adapter [ACAD] (on-line)
    [ 4.738714] [Firmware Bug]: Invalid critical threshold (0)
    [ 4.740429] thermal LNXTHERM:00: registered as thermal_zone0
    [ 4.740432] ACPI: Thermal Zone [THRM] (45 C)
    [ 4.752632] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
    [ 4.752638] ACPI: Power Button [PWRB]
    [ 4.752689] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
    [ 4.753681] ACPI: Lid Switch [LID]
    [ 4.753725] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    [ 4.753729] ACPI: Power Button [PWRF]
    [ 4.781097] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    [ 4.781104] ACPI: Battery Slot [BAT0] (battery present)
    [ 4.781120] acpi device:04: registered as cooling_device2
    [ 4.781180] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input4
    [ 4.781186] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
    [ 4.852803] wmi: Mapper loaded
    [ 4.877036] usbcore: registered new interface driver usbfs
    [ 4.877104] usbcore: registered new interface driver hub
    [ 4.878160] usbcore: registered new device driver usb
    [ 4.957721] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 4.967516] shpchp 0000:00:01.0: HPC vendor_id 1022 device_id 9602 ss_vid 1022 ss_did 1235
    [ 4.967520] shpchp 0000:00:01.0: Cannot reserve MMIO region
    [ 4.967537] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 4.994505] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
    [ 4.994599] SP5100 TCO timer: mmio address 0xb8fe00 already in use
    [ 5.029983] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 5.030017] r8169 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 5.030046] r8169 0000:03:00.0: setting latency timer to 64
    [ 5.030186] r8169 0000:03:00.0: irq 42 for MSI/MSI-X
    [ 5.030356] r8169 0000:03:00.0: eth0: RTL8102e at 0xf86b0000, 2c:27:d7:c2:cc:02, XID 04e00000 IRQ 42
    [ 5.068722] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
    [ 5.080796] input: PC Speaker as /devices/platform/pcspkr/input/input5
    [ 5.114480] ACPI Error: Field [D128] at 1040 exceeds Buffer [NULL] size 160 (bits) (20110316/dsopcode-236)
    [ 5.114487] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWMC] (Node f403d378), AE_AML_BUFFER_LIMIT (20110316/psparse-536)
    [ 5.114496] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node f403d498), AE_AML_BUFFER_LIMIT (20110316/psparse-536)
    [ 5.114524] ACPI Error: Field [D128] at 1040 exceeds Buffer [NULL] size 160 (bits) (20110316/dsopcode-236)
    [ 5.114528] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWMC] (Node f403d378), AE_AML_BUFFER_LIMIT (20110316/psparse-536)
    [ 5.114533] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node f403d498), AE_AML_BUFFER_LIMIT (20110316/psparse-536)
    [ 5.114582] input: HP WMI hotkeys as /devices/virtual/input/input6
    [ 5.114687] ACPI Error: Field [D128] at 1040 exceeds Buffer [NULL] size 160 (bits) (20110316/dsopcode-236)
    [ 5.114691] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWMC] (Node f403d378), AE_AML_BUFFER_LIMIT (20110316/psparse-536)
    [ 5.114696] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node f403d498), AE_AML_BUFFER_LIMIT (20110316/psparse-536)
    [ 5.114719] ACPI Error: Field [D128] at 1040 exceeds Buffer [NULL] size 160 (bits) (20110316/dsopcode-236)
    [ 5.114723] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWMC] (Node f403d378), AE_AML_BUFFER_LIMIT (20110316/psparse-536)
    [ 5.114728] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node f403d498), AE_AML_BUFFER_LIMIT (20110316/psparse-536)
    [ 5.189573] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 5.189634] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 5.189651] ehci_hcd 0000:00:12.2: setting latency timer to 64
    [ 5.189655] ehci_hcd 0000:00:12.2: EHCI Host Controller
    [ 5.189799] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
    [ 5.196779] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [ 5.196799] QUIRK: Enable AMD PLL fix
    [ 5.196811] ehci_hcd 0000:00:12.2: debug port 1
    [ 5.196834] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf0408600
    [ 5.206767] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
    [ 5.206918] hub 1-0:1.0: USB hub found
    [ 5.206921] hub 1-0:1.0: 5 ports detected
    [ 5.207249] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 5.207271] ehci_hcd 0000:00:13.2: setting latency timer to 64
    [ 5.207274] ehci_hcd 0000:00:13.2: EHCI Host Controller
    [ 5.207281] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
    [ 5.216774] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [ 5.216804] ehci_hcd 0000:00:13.2: debug port 1
    [ 5.216818] ehci_hcd 0000:00:13.2: irq 17, io mem 0xf0408500
    [ 5.227045] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
    [ 5.227176] hub 2-0:1.0: USB hub found
    [ 5.227180] hub 2-0:1.0: 5 ports detected
    [ 5.227341] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 5.227361] ehci_hcd 0000:00:16.2: setting latency timer to 64
    [ 5.227365] ehci_hcd 0000:00:16.2: EHCI Host Controller
    [ 5.227371] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
    [ 5.236781] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [ 5.236811] ehci_hcd 0000:00:16.2: debug port 1
    [ 5.236825] ehci_hcd 0000:00:16.2: irq 17, io mem 0xf0408400
    [ 5.246933] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
    [ 5.247064] hub 3-0:1.0: USB hub found
    [ 5.247067] hub 3-0:1.0: 4 ports detected
    [ 5.263032] Linux agpgart interface v0.103
    [ 5.311880] [drm] Initialized drm 1.1.0 20060810
    [ 5.407680] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [ 5.407709] sr 1:0:0:0: Attached scsi generic sg1 type 5
    [ 5.428263] cfg80211: Calling CRDA to update world regulatory domain
    [ 5.471823] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [ 5.471857] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 5.471873] ohci_hcd 0000:00:12.0: setting latency timer to 64
    [ 5.471877] ohci_hcd 0000:00:12.0: OHCI Host Controller
    [ 5.471889] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
    [ 5.483457] ohci_hcd 0000:00:12.0: irq 18, io mem 0xf0407000
    [ 5.520039] usb 1-3: new high speed USB device number 2 using ehci_hcd
    [ 5.544276] hub 4-0:1.0: USB hub found
    [ 5.544287] hub 4-0:1.0: 5 ports detected
    [ 5.544358] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 5.544380] ohci_hcd 0000:00:13.0: setting latency timer to 64
    [ 5.544383] ohci_hcd 0000:00:13.0: OHCI Host Controller
    [ 5.544400] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
    [ 5.556734] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf0406000
    [ 5.614194] hub 5-0:1.0: USB hub found
    [ 5.614205] hub 5-0:1.0: 5 ports detected
    [ 5.614521] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 5.614543] ohci_hcd 0000:00:14.5: setting latency timer to 64
    [ 5.614547] ohci_hcd 0000:00:14.5: OHCI Host Controller
    [ 5.614553] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
    [ 5.626830] ohci_hcd 0000:00:14.5: irq 18, io mem 0xf0405000
    [ 5.628610] brcmsmac: module is from the staging directory, the quality is unknown, you have been warned.
    [ 5.631815] brcmsmac 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [ 5.631822] brcmsmac 0000:02:00.0: setting latency timer to 64
    [ 5.684226] hub 6-0:1.0: USB hub found
    [ 5.684236] hub 6-0:1.0: 2 ports detected
    [ 5.684302] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 5.684338] ohci_hcd 0000:00:16.0: setting latency timer to 64
    [ 5.684341] ohci_hcd 0000:00:16.0: OHCI Host Controller
    [ 5.684348] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
    [ 5.696769] ohci_hcd 0000:00:16.0: irq 18, io mem 0xf0404000
    [ 5.713771] [drm] radeon defaulting to kernel modesetting.
    [ 5.713774] [drm] radeon kernel modesetting enabled.
    [ 5.713834] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 5.713838] radeon 0000:01:05.0: setting latency timer to 64
    [ 5.713961] [drm] initializing kernel modesetting (RS880 0x1002:0x9712).
    [ 5.713981] [drm] register mmio base: 0xF0300000
    [ 5.713982] [drm] register mmio size: 65536
    [ 5.714093] ATOM BIOS: HP_JoYaHeWi
    [ 5.714118] radeon 0000:01:05.0: VRAM: 256M 0x00000000C0000000 - 0x00000000CFFFFFFF (256M used)
    [ 5.714121] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
    [ 5.714330] [drm] Detected VRAM RAM=256M, BAR=256M
    [ 5.714334] [drm] RAM width 32bits DDR
    [ 5.714407] [TTM] Zone kernel: Available graphics memory: 429520 kiB.
    [ 5.714409] [TTM] Zone highmem: Available graphics memory: 1807462 kiB.
    [ 5.714411] [TTM] Initializing pool allocator.
    [ 5.714435] [drm] radeon: 256M of VRAM memory ready
    [ 5.714436] [drm] radeon: 512M of GTT memory ready.
    [ 5.714449] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 5.714450] [drm] Driver supports precise vblank timestamp query.
    [ 5.714468] [drm] radeon: irq initialized.
    [ 5.714471] [drm] GART: num cpu pages 131072, num gpu pages 131072
    [ 5.714930] [drm] Loading RS780 Microcode
    [ 5.754249] hub 7-0:1.0: USB hub found
    [ 5.754259] hub 7-0:1.0: 4 ports detected
    [ 5.948029] usb 5-2: new low speed USB device number 2 using ohci_hcd
    [ 5.948318] Linux media interface: v0.10
    [ 5.966992] radeon 0000:01:05.0: WB enabled
    [ 6.002321] [drm] ring test succeeded in 1 usecs
    [ 6.002420] [drm] radeon: ib pool ready.
    [ 6.002470] [drm] ib test succeeded in 0 usecs
    [ 6.002471] [drm] Enabling audio support
    [ 6.003308] [drm] Radeon Display Connectors
    [ 6.003310] [drm] Connector 0:
    [ 6.003311] [drm] VGA
    [ 6.003313] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
    [ 6.003314] [drm] Encoders:
    [ 6.003316] [drm] CRT1: INTERNAL_KLDSCP_DAC1
    [ 6.003317] [drm] Connector 1:
    [ 6.003318] [drm] LVDS
    [ 6.003319] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
    [ 6.003320] [drm] Encoders:
    [ 6.003321] [drm] LCD1: INTERNAL_KLDSCP_LVTMA
    [ 6.003323] [drm] Connector 2:
    [ 6.003323] [drm] HDMI-A
    [ 6.003324] [drm] HPD1
    [ 6.003326] [drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
    [ 6.003327] [drm] Encoders:
    [ 6.003328] [drm] DFP1: INTERNAL_UNIPHY
    [ 6.008768] Linux video capture interface: v2.00
    [ 6.044098] uvcvideo: Found UVC 1.00 device HP Webcam-101 (064e:f203)
    [ 6.045375] input: HP Webcam-101 as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/input/input7
    [ 6.045435] usbcore: registered new interface driver uvcvideo
    [ 6.045436] USB Video Class driver (v1.0.0)
    [ 6.076019] [drm] radeon: power management initialized
    [ 6.128889] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 6.128926] HDA Intel 0000:00:14.2: setting latency timer to 64
    [ 6.154777] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
    [ 6.244738] hda_codec: ALC270: BIOS auto-probing.
    [ 6.246299] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input8
    [ 6.248391] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
    [ 6.248436] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
    [ 6.395292] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.0/input/input11
    [ 6.395383] generic-usb 0003:046D:C016.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:13.0-2/input0
    [ 6.395398] usbcore: registered new interface driver usbhid
    [ 6.395400] usbhid: USB HID core driver
    [ 6.510369] Synaptics Touchpad, model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xe40000/0xa0400
    [ 6.593046] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input12
    [ 7.087673] [drm] fb mappable at 0xE0141000
    [ 7.087675] [drm] vram apper at 0xE0000000
    [ 7.087677] [drm] size 4325376
    [ 7.087678] [drm] fb depth is 24
    [ 7.087679] [drm] pitch is 5632
    [ 7.087757] fbcon: radeondrmfb (fb0) is primary device
    [ 7.136806] Console: switching to colour frame buffer device 170x48
    [ 7.146801] fb0: radeondrmfb frame buffer device
    [ 7.146802] drm: registered panic notifier
    [ 7.146809] [drm] Initialized radeon 2.9.0 20080528 for 0000:01:05.0 on minor 0
    [ 7.146869] HDA Intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [ 7.146924] HDA Intel 0000:01:05.1: setting latency timer to 64
    [ 7.882901] EXT4-fs (sda3): re-mounted. Opts: (null)
    [ 8.205168] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
    [ 8.451818] Adding 1052252k swap on /dev/sda2. Priority:-1 extents:1 across:1052252k
    Thank you!
    Czar.

  • My JSP page takes a lot of time to go to next JSP

    Hi All,
    I have a JSP page which loads dynamically depending on what the user enters. This page works fine for items upto 20-30 but as the number of items increases, my JSP page takes a lot of time to go to the next one. Heres what my JSP looks like:
    <%@ taglib uri="/WEB-INF/struts-bean.tld" prefix="bean" %>
    <%@ taglib uri="/WEB-INF/struts-html.tld" prefix="html" %>
    <%@ taglib uri="/WEB-INF/struts-form.tld" prefix="form" %>
    <%@ taglib uri="/WEB-INF/struts-logic.tld" prefix="logic" %>
    <%@ taglib uri="/WEB-INF/rswtags.tld" prefix="rsw" %>
    <jsp:useBean id="dateFormatIntl" scope="session" type="java.lang.String"/>
    <html>
    <head>
    <title><bean:message key="title.application"/> - <bean:message key='header.return_to_vendor_detail'/></title>
    <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
    <%@ include file="rsw_functions.jsp" %>
    <%@ include file="shipment_rtv_functions.jsp" %>
    <script language="JavaScript" type="text/javascript">
    var page = "<bean:message key='header.return_to_vendor_detail'/>"
    var rtvEntryArray = new Array();
    var totalAmtString;
    function setFormValues()
    var rtvEntriesString = "";
    for (var v = 0; v < rtvEntryArray.length; v++)
    var rtvEntryString = rtvEntryArray[v].itemNumber + "~"
    + rtvEntryArray[v].itemQty + "~"
    <rsw:display displayElementName="rtv_reason">
    + rtvEntryArray[v].inventoryStatusCode + "~"
    + rtvEntryArray[v].inventoryStatusName + "~"
    + rtvEntryArray[v].reasonCodeId + "~"
    + rtvEntryArray[v].reasonCodeName + "~" +
    </rsw:display>
    <rsw:display_false displayElementName="rtv_reason">
    + " " + "~"
    + " " + "~"
    + " " + "~"
    + " " + "~" +
    </rsw:display_false>
    rtvEntryArray[v].valid;
    rtvEntriesString = rtvEntriesString + rtvEntryString + ";";
    document.rtvVsatShipmentForm.rtvEntriesString.value = rtvEntriesString;
    function writeItem(itemNumber, itemQty, inventoryStatusCode, inventoryStatusName,
    reasonCodeId, reasonCodeName)
    if(!acquireFakeLock()) return;
    if (!arrayContainsItem(itemNumber, reasonCodeId))
    addEntry(itemNumber, itemQty, inventoryStatusCode, inventoryStatusName,
    reasonCodeId, reasonCodeName, "true");
    else
    setItemQtyReasonArray(itemNumber, itemQty, reasonCodeId, reasonCodeName);
    writeTable(false);
         releaseFakeLock();
    function handleApply()
    <%-- change this if 'please select...' value changes to something other than a space --%>
    if (document.rtvVsatShipmentForm.applyReasonCode.value == " ")
    alert('<bean:message key="error.must_enter_a_reason" />');
    return;
    if (checkQuantityGreaterThenZero(document.rtvVsatShipmentForm.applyQty))
    formatQuantity(document.rtvVsatShipmentForm.applyQty);
    if (document.rtvVsatShipmentForm.applyId.value == '')
    alert("<bean:message key='error.no_dsd_order_entries' />");
    document.rtvVsatShipmentForm.applyId.focus();
    return;
    writeItem(document.rtvVsatShipmentForm.applyId.value,
    document.rtvVsatShipmentForm.applyQty.value
    <rsw:display displayElementName="rtv_reason">,
    document.rtvVsatShipmentForm.selectedInventoryStatus.options[document.rtvVsatShipmentForm.selectedInventoryStatus.selectedIndex].value,
    document.rtvVsatShipmentForm.selectedInventoryStatus.options[document.rtvVsatShipmentForm.selectedInventoryStatus.selectedIndex].text,
    document.rtvVsatShipmentForm.applyReasonCode.options[document.rtvVsatShipmentForm.applyReasonCode.selectedIndex].value,
    document.rtvVsatShipmentForm.applyReasonCode.options[document.rtvVsatShipmentForm.applyReasonCode.selectedIndex].text
    </rsw:display>
    document.rtvVsatShipmentForm.applyId.value = '';
    document.rtvVsatShipmentForm.applyQty.value = 1;
    document.rtvVsatShipmentForm.applyId.focus();
    <rsw:display displayElementName="rtv_reason">
    document.rtvVsatShipmentForm.selectedInventoryStatus.value
    = document.rtvVsatShipmentForm.selectedInventoryStatus.options[0].value;
    selectFromInvStatus();
    </rsw:display>
    totalAmounts();
    function clearFields()
    document.rtvVsatShipmentForm.returnAuth.value = "";
    document.rtvVsatShipmentForm.applyId.value = "";
    document.rtvVsatShipmentForm.applyQty.value = "1";
    document.rtvVsatShipmentForm.applyId.focus();
    document.rtvVsatShipmentForm.selectedInventoryStatus.value = document.rtvVsatShipmentForm.selectedInventoryStatus.options[0].value;
    selectFromInvStatus();
    function getCurrentOptions()
    if (document.rtvVsatShipmentForm.selectedInventoryStatus.value == "AVAILABLE")
    return availableOptions;
    return unavailableOptions;
    function populateDropDown(dropdownField)
         var currentOptions;
    currentOptions = getCurrentOptions();     
    dropdownField.options.length = 0;
    var oPleaseSelectOption = document.createElement("OPTION");
    oPleaseSelectOption.value = " ";
    oPleaseSelectOption.text = "<bean:message key="label.please_select"/>";
    dropdownField.options.add(oPleaseSelectOption);
    for (var i = 0; i < currentOptions.length; i++)
    dropdownField.options.add(currentOptions);
    function selectFromInvStatus()
    populateDropDown(document.rtvVsatShipmentForm.applyReasonCode);
    function initialize()
    document.rtvVsatShipmentForm.applyId.focus();
    createReasonOptionObjects();
    selectFromInvStatus();
    <logic:equal name="rtvVsatShipmentForm" property="returnAuthRequired" value="true">
    if (document.rtvVsatShipmentForm.returnAuth.value == '')
    document.rtvVsatShipmentForm.returnAuth.focus();
    </logic:equal>
    createEntryArray(document.rtvVsatShipmentForm.rtvEntriesString.value, false);
    <rsw:display displayElementName="rtv_reason">
    </rsw:display>
    totalAmounts();
    function next()
    setFormValues();
    if (document.rtvVsatShipmentForm.rtvEntriesString.value == '')
    alert("<bean:message key='error.no_dsd_order_entries' />");
    document.rtvVsatShipmentForm.applyId.focus();
    return;
    <logic:equal name="rtvVsatShipmentForm" property="returnAuthRequired" value="true">
    if (document.rtvVsatShipmentForm.returnAuth.value == '')
    alert("<bean:message key='error.return_auth_required' />");
    document.rtvVsatShipmentForm.returnAuth.focus();
    return;
    </logic:equal>
    if (!validateTextAreaLength(document.rtvVsatShipmentForm.comments,
    "<bean:message key='label.comments'/>", 255))
    return false;
    document.rtvVsatShipmentForm.submit();
    function doBack()
    backLink.href = "<bean:write name='rtvVsatShipmentForm' property='previousAction' />";
    document.rtvVsatShipmentForm.action=backLink.href;
    document.rtvVsatShipmentForm.submit();
    function handleItemLookup()
    window.open(itemLookupLink.href + "?actionToReturnTo=shipment_rtv_vsat_create&fieldToPopulateUponReturn=applyId","RSWLookupWindow");
    </script>
    <jsp:include page="/elements/top_banner2.jsp" flush="true"/>
    <!-- Beginning of Page Body -->
    <body onload="initialize();displayErrors();">
    <form:form action="shipment_rtv_vsat_to_summary.do" style="margin-top:0">
    <input type="hidden" name="fieldToPopulateUponReturn" value="applyId">
    <span style="display:none">
    <html:link styleId="itemLookupLink" href="item_lookup_start.do"></html:link>
    <html:link styleId="backLink" href="dummyLink"></html:link>
    </span>
    <html:hidden property="rtvEntriesString"/>
    <form:hidden property="fromLocationId" />
    <table width="700" class="bgColor" cellpadding="0" cellspacing="0" border="0">
    <tr>
    <td class="spacerCell">
    </td>
    </tr>
    <tr>
    <td class="leadSpacerCell" rowspan="3"></td>
    <td class="bodymd" width="125">
    <bean:message key="label.rtv_number" />:
    </td>
    <td class="bodymd">
    <bean:write name="rtvVsatShipmentForm" property="rtvNumber" />
    </td>
    <td class="bodymd">
    </td>
    <td class="bodymd">
    <bean:message key= "label.date" />: 
    </td>
    <td class="bodymd" align="left">
    <bean:write name="rtvVsatShipmentForm" property="createDate"/>
    </tr>
    <tr>
    <td class="spacerCell">
    </td>
    <td colspan="3"></td>
    <logic:equal name="dateFormatIntl" value="true">
    <td align="left" valign="top" class="bodymd">
    <span class="bodyxsm">(<bean:message key="label.date_format_string_intl"/>)</span>
    </td>
    </logic:equal>
    <logic:notEqual name="dateFormatIntl" value="true">
    <td>
    <span class="bodyxsm">(<bean:message key="label.date_format_string_us"/>)</span>
    </td>
    </logic:notEqual>
    </tr>
    <tr>
    <td class="bodymd">
    <bean:message key="label.status" />: 
    <td class="bodymd">
    <rsw:display displayElementName="rtv_status">
    <form:select property="selectedStatusCode" >
    <form:options name="rtvVsatShipmentForm" property="statusIds"
    labelProperty="statusNames" />
    </form:select>
    </rsw:display>
    <rsw:display_false displayElementName="rtv_status">
    <bean:write name="rtvNonVsatShipmentForm" property="selectedStatus.description" />
    </rsw:display_false>
    </td>
    </td>
    </tr>
    <tr>
    <td class="spacerCell">
    </td>
    </tr>
    <tr>
    <td class="leadSpacerCell"></td>
    <td class="bodymd">
    <bean:message key="label.ship_from_location" />:
    </td>
    <td class="bodymd" colspan="5">
    <bean:write name="rtvVsatShipmentForm" property="fromLocationId" />
    </td>
    </tr>
    <tr>
    <td class="spacerCell">
    </td>
    </tr>
    <tr>
    <td class="leadSpacerCell">
    <td class="bodymd">
    <bean:message key="label.supplier_name" />:
    </td>
    <td class="bodymd">
    <bean:write name="rtvVsatShipmentForm" property="supplierName" />
    </td>
    <td class="bodymd" width="125">
    <bean:message key="label.supplier_number" />: 
    </td>
    <td class="bodymd" colspan="3">
    <bean:write name="rtvVsatShipmentForm" property="supplierId" />
    </td>
    </tr>
    <tr>
    <td class="spacerCell">
    </td>
    </tr>
    <tr>
    <td class="leadSpacerCell">
    <td class="bodymd">
    <bean:message key="label.rtv_paid" />: 
    </td>
    <td class="bodymd" align="left">
    <form:select property="selectedPaymentStatusCode" >
    <form:options name="rtvVsatShipmentForm" property="paymentStatusIds"
    labelProperty="paymentStatusNames" />
    </form:select>
    </td>
    <td class="leadSpacerCell">
    </td>
    </tr>
    <%-- <tr>
    <td class="bodymd">
    <bean:message key="label.check_number" />: 
    </td>
    <td class="bodymd" align="left">
    <form:text name="rtvVsatShipmentForm" property="checkNumber" maxlength="12"/>
    </td>
    </tr>
    --%>
    </table>
    <table width="700" class="bgColor" cellpadding="0" cellspacing="0" border="0">
    <tr>
    <td class="spacerCell">
    </td>
    <tr>
    <td class="leadSpacerCell">
    </td>
    <td colspan="3">
    <table border="0" cellpadding="0" cellspacing="0">
    <tr>
    <td class="bodymd">
    <bean:message key="label.return_authorization_no" />: 
    </td>
    <td class="bodymd" align="left">
    <form:text name="rtvVsatShipmentForm" property="returnAuth" maxlength="12"/>
    </td>
    <td class="leadSpacerCell">
    </td>
    </tr>
    </table>
    </td>
    </tr>
    <tr>
    <td class="spacerCell">
    </td>
    </tr>
    <tr>
    <td class="leadSpacerCell">
    </td>
    <td class="bodymd" valign="top">
    <bean:message key="label.supplier_address" />
    </td>
    </tr>
    <tr>
    <td class="leadSpacerCell">
    </td>
    <td colspan="6">
    <table border="0">
    <tr>
    <td width="10" rowspan="4">
    </td>
    <td class="bodymd">
    <form:text property="addressLine1" style="width:200" />
    </td>
    <td width="5">
    </td>
    <td class="bodymd">
    <bean:message key="label.city" />: 
    </td>
    <td colspan="3" class="bodymd">
    <form:text property="addressCity" style="width:200" />
    </td>
    </tr>
    <tr>
    <td class="bodymd">
    <form:text property="addressLine2" style="width:200" />
    </td>
    <td width="5">
    </td>
    <td class="bodymd">
    <bean:message key="label.state_or_province" />: 
    </td>
    <td class="bodymd">
    <form:text property="addressStateOrProvince" style="width:80" />
    </td>
    <td class="bodymd">
    <bean:message key="label.postal_code" />: 
    </td>
    <td class="bodymd">
    <form:text property="addressPostalCode" style="width:80" />
    </td>
    </tr>
    <tr>
    <td class="bodymd">
    <form:text property="addressLine3" style="width:200" />
    </td>
    <td width="5">
    </td>
    <td class="bodymd">
    <bean:message key="label.country" />: 
    </td>
    <td colspan="3" class="bodymd">
    <form:text property="addressCountry" style="width:200" />
    </td>
    </tr>
    </table>
    </td>
    <tr>
    <td class="spacerCell">
    </td>
    </tr>
    <tr>
    <td class="spacerCell">
    </td>
    </tr>
    <tr>
    <td class="leadSpacerCell">
    </td>
    <td class="bodymd" valign="top">
    <bean:message key="label.comments" />: 
    </td>
    <td>
    <form:textarea property="comments" cols="65" rows="3" onkeypress="limitKeyPress(this, 255)"/>
    </td>
    </tr>
    <tr>
    <td class="spacerCell">
    </td>
    </tr>
    <tr>
    <td colspan="3" class="horizontalLine">
    </td>
    </tr>
    <tr>
    <td class="spacerCell">
    </td>
    </tr>
    </table>
    <table width="700" cellpadding="0" cellspacing="0" border="0" class="bgColor">
    <tr>
    <td class="leadSpacerCell"></td>
    <td class="bodymdbold"><bean:message key='label.item'/>: </td>
    <td><form:text size="15" property="applyId"/>  </td>
    <td class="bodymdbold"><bean:message key='label.quantity'/>: </td>
    <td><form:text size="8" maxlength="8" property="applyQty" />  </td>
    <rsw:display displayElementName="rtv_reason">
    <td style="display:none" class="bodymdbold"><bean:message key='label.inventory_status'/>: </td>
    <td style="display:none">
    <form:select property="selectedInventoryStatus" onchange="selectFromInvStatus();">
    <form:options name="rtvVsatShipmentForm" property="inventoryStatusCodes"
    labelProperty="inventoryStatusDescriptions" />
    </form:select>
    </td>
    <td class="bodymdbold"><bean:message key='label.reason_code'/>: </td>
    <td>
    <select name="applyReasonCode">
    <%-- <logic:iterate name="rtvVsatShipmentForm" property="rtvReasons" id="reason">
    <option value="<bean:write name="reason" property="code"/>">
    <bean:write name="reason" property="description"/>
    </option>
    </logic:iterate>
    --%>
    </select>
    </td>
    </rsw:display>
    </tr>
    <tr>
    <td class="leadSpacerCell"></td>
    <td class=bodymd>
    <a class="genericLink" href="" onClick="handleItemLookup(); return false"><bean:message key='link.item'/></a>
    </td>
    </tr>
    <tr>
    <td class="leadSpacerCell"></td>
    <td colspan="9" align="left">
    <br>
    <input type="submit"
    value="<bean:message key='button.apply'/>"
    onClick="handleApply();return false;">  
    <input type="button" value="Clear" onclick="clearFields()";></td>
    </tr>
    <tr>
    <td class="spacerCell">
    </td>
    </tr>
    <tr>
    <td class="horizontalWhiteLine" colspan="10"></td>
    </tr>
    </table>
    <table class="bgColor" width="700" cellpadding="0" cellspacing="0" border="0">
    <tr>
    <td class="spacerCell">
    </td>
    </tr>
    <tr>
    <td><rsw:errors/></td>
    </tr>
    </table>
    <div id="item_list_div">
    </div>
    <table width="700" cellpadding="0" cellspacing="0" border="0" class="bgColor">
    <tr>
    <td class="spacerCell"></td>
    </tr>
    <tr>
    <td>
    <table width="700" cellpadding="0" cellspacing="0" border="0" class="bgColor">
    <tr>
    <td class="bodymdbold" align="right" nowrap><div id="total_amt_div"></div></td>
    </tr>
    </table>
    </td>
    </tr>
    <tr>
    <td class="spacerCell"></td>
    </tr>
    <tr>
    <td class="horizontalLine" colspan="3"></td>
    </tr>
    </table>
    <table cellpadding="0" cellspacing="0" border="0" width="700">
    <tr>
    <td class="spacerCell"></td>
    </tr>
    <tr>
    <td class="leadSpacerCell">
    </td>
    <td align="left">
    <input type="button" value="<bean:message key='button.next'/>"
    onclick="next();">
    <input type=button value="<bean:message key='button.back'/>"
    onclick="doBack();">
    <input type=button value="<bean:message key='button.cancel'/>"
    onclick="doSubmit('main', 'main.do');">
    </td>
    </tr>
    </table>
    </form:form>
    <div id="log"></div>
    </body>
    <!-- End of Page Body -->
    <jsp:include page="/elements/bottom_banner2.jsp" flush="true"/>
    <script language="JavaScript" type="text/javascript">
    function handleAction(retVal,position)
    if (retVal != null)
    var command = retVal["command"];
    if (command == "OK")
    updateArray(retVal["id"],
    formatQuantityFromVar(retVal["qty"]), true,
    <rsw:display displayElementName="rtv_reason">
    retVal["inventoryStatusCode"],
    retVal["inventoryStatusName"],
    retVal["reasonCode"],
    retVal["reasonDescription"],
    </rsw:display>
    <rsw:display_false displayElementName="rtv_reason">
    null, null, null, null,
    </rsw:display_false>
    position);
    totalAmounts();
    if (command == "Remove")
    deleteRow(position);
    writeTable(false);
    totalAmounts();
    function showEditWindow(sku, qty,
    <rsw:display displayElementName="rtv_reason">
    inventoryStatusCode, reasonCode,
    </rsw:display>
    position)
    if(!acquireFakeLock()) return;
    var elements = editWindowDiv.document.all;
    elements("editWindowId").value=sku;
    elements("editWindowQty").value = qty;
    <rsw:display displayElementName="rtv_reason">
    elements("editWindowInventoryStatusCode").value = inventoryStatusCode;
    elements("hiddenReasonCode").value = reasonCode;
    </rsw:display>
    var retVal;
    // if (IE6)
    retVal = window.showModalDialog("popup.jsp", editWindowDiv,
    "dialogWidth:335px;dialogHeight:230px;scroll:no;status:no;unadorned:no");
    else
    retVal = window.showModalDialog("javascript:document.write(window.dialogArguments.innerHTML);editWindowInit();",editWindowDiv,
    "dialogWidth:335px;dialogHeight:230px;scroll:no;status:no;unadorned:no");
    handleAction(retVal,position);
         releaseFakeLock();
    function updateArray(itemNumber, itemQty, fromEditWindow,
    inventoryStatusCode, inventoryStatusName,
    reasonCodeId, reasonCodeName, position, supplierCost)
    if (((rtvEntryArray[position].reasonCodeId != reasonCodeId)
    && arrayContainsItem(itemNumber, reasonCodeId))
         ||
         ((rtvEntryArray[position].itemNumber != itemNumber)
         && arrayContainsItemsExceptPos(itemNumber, reasonCodeId, position)))
    deleteRow(position);
    setItemQtyReasonArray(itemNumber, itemQty, reasonCodeId, reasonCodeName, supplierCost);
    else
    var rtvEntry = new Object();
    rtvEntry.itemNumber = itemNumber;
    rtvEntry.itemQty = itemQty;
    rtvEntry.inventoryStatusCode = inventoryStatusCode;
    rtvEntry.inventoryStatusName = inventoryStatusName;
    rtvEntry.reasonCodeId = reasonCodeId;
    rtvEntry.reasonCodeName = reasonCodeName;
    rtvEntry.supplierCost = supplierCost;
    rtvEntry.valid = rtvEntryArray[position].valid;
    rtvEntryArray[position] = rtvEntry;
    writeTable();
    </script>
    <div id="editWindowDiv" style="display:none">
    <html>
    <head>
    <style type="text/css">
    .titleTxt { font-size: 12 ; font-style: italic ; font-weight: bold; color: white ; font-family: arial }
    .bodymd {color: #000000; font-family: arial; font-size: 10pt; text-decoration: none}
    .bodymdbold {color: #000000; font-family: arial; font-size: 10pt; text-decoration: none; font-weight: bold}
    .bgColor { background-color: #efefef }
    </style>
    <title><bean:message key="title.edit_window" /></title>
    <script language="JavaScript">
    function handleOk()
    if (checkQuantityGreaterThenZero(document.editPopupForm.editWindowQty))
    var returnArray = new Array();
    returnArray["id"] = document.editPopupForm.editWindowId.value;
    returnArray["qty"] = document.editPopupForm.editWindowQty.value;
    <rsw:display displayElementName="rtv_reason">
    returnArray["inventoryStatusCode"] = document.editPopupForm.editWindowInventoryStatusCode.options[document.editPopupForm.editWindowInventoryStatusCode.selectedIndex].value;
    returnArray["inventoryStatusName"] = document.editPopupForm.editWindowInventoryStatusCode.options[document.editPopupForm.editWindowInventoryStatusCode.selectedIndex].text;
    returnArray["reasonCode"] = document.editPopupForm.editWindowReasonCode.options[document.editPopupForm.editWindowReasonCode.selectedIndex].value;
    returnArray["reasonDescription"] = document.editPopupForm.editWindowReasonCode.options[document.editPopupForm.editWindowReasonCode.selectedIndex].text;
    </rsw:display>
    returnArray["command"] = "OK";
    window.returnValue = returnArray;
    window.close();
    function handleCancel()
    window.close();
    function handleRemove()
    var returnArray = new Array();
    returnArray["command"] = "Remove";
    window.returnValue = returnArray;
    window.close();
    function init()
    document.title = "<bean:message key="title.edit_window" />";
    document.editPopupForm.editWindowQty.focus();
    <rsw:display displayElementName="rtv_reason">
    createReasonOptionObjects();
    setReasonOptions();
    document.editPopupForm.editWindowReasonCode.value = document.editPopupForm.hiddenReasonCode.value;
    </rsw:display>
    <rsw:display displayElementName="rtv_reason">
    function setReasonOptions()
    var currentOptions;
    document.editPopupForm.editWindowReasonCode.options.length = 0;
    if (document.editPopupForm.editWindowInventoryStatusCode.value == "AVAILABLE")
    currentOptions = availableOptions;
    else
    currentOptions = unavailableOptions;
    for (var i = 0; i < currentOptions.length; i++)
    document.editPopupForm.editWindowReasonCode.options.add(currentOptions[i]);
    </rsw:display>
    var availableOptions = new Array();
    var unavailableOptions = new Array();
    <rsw:display displayElementName="rtv_reason">
    function createReasonOptionObjects()
    var oOption;
    <logic:iterate name="rtvVsatShipmentForm" property="availableInventoryStatusReasons" id="reason">
    oOption = document.createElement("OPTION");
    oOption.value = "<bean:write name="reason" property="code"/>";
    oOption.text = "<bean:write name="reason" property="description"/>";
    availableOptions[availableOptions.length] = oOption;
    </logic:iterate>
    <logic:iterate name="rtvVsatShipmentForm" property="unavailableInventoryStatusReasons" id="reason">
    oOption = document.createElement("OPTION");
    oOption.value = "<bean:write name="reason" property="code"/>";
    oOption.text = "<bean:write name="reason" property="description"/>";
    unavailableOptions[unavailableOptions.length] = oOption;
    </logic:iterate>
    </rsw:display>
    </script>
    <%@ include file="rsw_functions.jsp" %>
    </head>
    <body leftmargin="0" topmargin="0" style="border:4px ridge lightgrey">
    <span style="margin-top:0;margin-left:0,margin-bottom:0;margin-right:0">
    <table cellspacing="0" cellpadding="0" border="0" bordercolor="#000000" width="330">
    <tr>
    <td bgcolor="#ff9999" width="100%" height="1" colspan="2"></td>
    </tr>
    <tr>
    <td bgcolor="#ff0000" height="15" align="left"><span
    class=titleTxt>  <bean:message key="label.edit" /> </span></td>
    <td bgcolor="#ff0000" height="15" align="right"><span
    class="titleTxt"><bean:message key="label.application_title" />   </span></td>
    </tr>
    <tr>
    <td bgcolor="#000000" width="100%" height="1" colspan="2"></td>
    </tr>
    </table>
    </span>
    <form name="editPopupForm" style="margin-top:0;margin-left:0,margin-bottom:0;margin-right:0"
    onsubmit="handleOk();return false;">
    <input type="hidden" name="editWindowPosition" value="">
    <input type="hidden" name="hiddenReasonCode" value="">
    <table cellspacing='0' class='bgColor' cellpadding='0' border='0' width='330'>
    <tr><td> </td></tr>
    <tr>
    <td class='bodymd'>  <bean:message key='label.item'/>:</td>
    <td class='bodymd'><input type="text" name="editWindowId" value="[id]" ></td>
    </tr>
    <tr>
    <!--Start RQST 34502 SIR 61007-->
    <!--td class='bodymd'--><!--  --><!--bean:message key='label.count_quantity'/--><!--:--><!--/td-->
    <td class='bodymd'>  <bean:message key='label.return_quantity'/>:</td>
    <!--End RQST 34502 SIR 61007-->
    <td class='bodymd'><input type="text" maxlength="8" name="editWindowQty" value="[qty]"></td>
    </tr>
    <rsw:display displayElementName="rtv_reason">
    <tr>
    <td style="display:none" class='bodymd'>  <bean:message key='label.inventory_status'/>:</td>
    <td style="display:none" class='bodymd'><select name="editWindowInventoryStatusCode" onchange="setReasonOptions();">
    <option value="AVAILABLE"><bean:message key="label.available"/></option>
    <option value="UNAVAILABLE"><bean:message key="label.unavailable"/></option>
    </select></td>
    </tr>
    <tr>
    <td class='bodymd'>  <bean:message key='label.reason_code'/>:</td>
    <td class='bodymd'><select name="editWindowReasonCode">
    <logic:iterate name="rtvVsatShipmentForm" property="rtvReasons" id="editWindowReason">
    <option value="<bean:write name="editWindowReason" property="code"/>">
    <bean:write name="editWindowReason"

    God Lord! Does anyone else here write JSPs that look like that?
    If I had to maintain that I would shoot myself straight in the temple.
    Sorry, I don't have answer to your question, I just had to say that.
    Do you like your job?

  • How do I keep more than one safari page open at the same time?

    New to Mac.  I'm used to being able to have several applications open at the same time, and able to check emails, eBay, camera for downloading photos, etc., but when trying this on Mac, I can't seem to figure out how to swing from email to something else....oh, it opens up eBay and other pages, but not where I left it...I have to keep starting from the beginning...name, password, etc.   I can't have 3, 4 or 5 safari pages open at the same time??  This is making my life cumbersome, and running back to the basement office and using my dying Dell desktop where life was a bit simpler.  Sometimes I need to copy a few paragraphs on one website into another....and its taking me way too long to get this done.  I know there's a way of doing this on Mac....

    Hi Suzkas,
    I was new to mac a short time ago and I had frustrations in the learning curve especially as I was so used to working with PC.
    If you look at the top left of the screen you will see the words SAFARI next to the apple logo. if not then either open safari or click on the window and the mac will then show safari at the top. If you now click on FILE you can select NEW WINDOW or NEW TAB as you wish. I often use new tab and switch between them. If you go to VIEW and select CUSTOMISE TOOLBAR you can drag an icon to the top of the safari window and you won't have to keep going to the menu to add a new tab. I will sometimes select new window to keep something separate from my other work.
    If you close down a window you will often lose your place, but using the tab system you will leave the window active unless you select the cross to terminate. If you have a separate window open you can select the orange blob (between the red and green at the top) and the window will slide down to the dock and stay there, active, for you to return and continue.
    Hope this help, stay with it, go see the instore staff and pretty soon you wont look back
    PS I have PARALLELLS6 running with a copy of windows 7 on my mac. This means that I can switch to microsoft if I want to. However, with office for mac installed I rarely need to now, the only time I ever open windows is for an application that has no mac version.

  • For some reason the Apple ID window in iTunes  and App Store now seems to have a character number constraint. As a result I am unable to enter the final few characters of my Apple ID which I have had for many years. Does anyone know what has caused this?

    For some reason the Apple ID window in iTunes and App Store now seems to suddenly have a character number constraint which prevents me using my 29 character Apple ID. As a result I am unable to enter the final few characters of my Apple ID which I have had for many years. Does anyone know what has caused this?

    You need to ask Apple for assistance with getting back into your old ID. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to resolve this issue through the Account Security team, fill out and submit this form.
    (118441)

Maybe you are looking for

  • Need help pointing email mx records to correct locations

    Hello,    My customer stopped recieving emails when I took his site live with BC. I called Godaddy who his email was already set up with. They told me I needed to get two mx records pointed to the correct locations. THey gave me the locations, but I

  • Successfully connected clients disconnetcs after seconds

    Hello, I'm having troubles with AP541N in clustered mode. The problem is that clients connects successfully but get disconnected  after seconds without any visible reason. The AP541N is configured to authenticate the clients against a Symantec Networ

  • I have some Double apps in creative cloud?

    Hello. I have Adobe creative cloud and whenever I go into my apps section, I notice I have two apps for PHotoshop, Illustrator, and Indesign. For example I see a Photoshop CC and a Photoshop CC (2014). I this a problem? If so how do I fix it?

  • Contact Sheet Creation: Super Fast!

    With regards to my previous post: Wow! I just created/saved a contact sheet to PDF using Draft mode. Lightspeed! Sweet! Im starting to like this application.... : ) Took about 20 seconds to do what would have taken 15 minutes in non draft mode. Excel

  • Inline Object Basealign

    Hi scripters I am doing find and replace here, it works well. var myPath=prompt ('Enter your equation file path') app.findPreferences = NothingEnum.nothing; app.changePreferences = NothingEnum.nothing; app.findPreferences.appliedCharacterStyle = "Eqn