Sound on "play: good/on "test "bad

When I play my project i get clear voices but when I test it,
thus converting it to an swf, the voice sounds as if they have a
mouth full of peanutbutter.

lhdonohue wrote:
> When I play my project i get clear voices but when I
test it, thus converting it to an swf, the voice sounds as if they
have a mouth full of peanutbutter.
I love that one "peanutbutter" :)
The problem is that your default export quality setting is
probably very low.
Open the library, CTRL L - right click the sound file -
Properties.
Play around with different quality and compression level. You
can balance
quality versus the size.
Take note tho, that while working with voice there are many
ways to efficiently
compress lengthy file to really small file with unusually
clear quality.
Save it as ADPCM (adaptive pulse code modulation) or Mp3
9kbps as your second choice.
Best Regards
Urami
!!!!!!! Merry Christmas !!!!!!!
Happy New Year
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

Similar Messages

  • I spilled some pop on the back of my iPad. I cleaned it off and everything seems to be going good but when I play music it will either play with no sound or play then continue with no sound. What can I do to fix this (without being costly, it's a iPad 2)

    I spilled some pop on the back of my iPad. I cleaned it off and everything seems to be going good but when I play music it will either play with no sound or play then continue with no sound. What can I do to fix this (without being costly, it's a iPad 2) this happens with other music apps too. Please I need help!

    You can try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
    Try again to see if the problem persists. If it doesn't work, there isn;t much anyone here can do for you. It may be a physical problem with your speakers.

  • Sound only plays in Front left speak on Windows 7 with Xfi Extreme Music??

    I have Xfi Extreme Music (SB0640). In installed the lastes drivers for windows 7 (<a rel="nofollow" href="http://forums.creative.com/t5/forums/postpage/board-id/#]Creative Sound Blaster X-Fi series driver 2.8.003 [/url]), When I run a speaker test all 6 speakers work, however when I use media player, media center etc. Only the front left speaker works.
    Do I need to install creative Alchemy?
    Console Launchers does not load on boot
    Any asistance will be appreciated
    Thanks in advance

    NRe: Sound only plays in Front left speak on Windows 7 with Xfi Extreme Music? You will need to have the Creative Console Launcher which will let you have CMSS-3d or Creative Multichannel Surround Sound. You can find the newest version for your card here......
    <a rel="nofollow" href="http://support.creative.com/downloads/download.aspx?nDownloadId=094"]http://support.creative.com/downloads/download.aspx?nDownloadId=094[/url]
    Honestly though, dont bother with just that. Get Daniel K.'s X-FI support pack which is updated with the newest drivers and applications for your card. Plus, he tweaked those with fixes for installation/integration? under operating systems other than XP.
    That can be found here.......
    <a rel="nofollow" href="http://rapidshare.com/files/234436040/XFI_SupportPack_2_0.exe"]http://rapidshare.com/files/234436040/XFI_SupportPack_2_0.exe[/url]
    And the link is still good.

  • Pause before sounds are played

    I just noticed that I posted *[an iMac question|http://discussions.apple.com/thread.jspa?threadID=2054360]* in the wrong forum. I didn't get anywhere in that forum. Here's updated question text for the iMac folks:
    I have a 24" iMac6,1, late 2006, plastic case, 2.16 GHz Core 2 Duo, 2 GB memory.
    If no sound has been played in the last 30 seconds or so then there's about one second delay before a sound can be played. This is bad enough but the delay also holds up whatever app is causing the sound. This is really annoying.
    The problem has been around a long time: see [here|http://discussions.apple.com/thread.jspa?messageID=6689782] and also [here|http://discussions.apple.com/thread.jspa?messageID=3479343] but I haven't found a solution.
    For example, I use the terminal a lot (unix sw development etc.). Filename and command completion using the tab key are pretty important to being able to work fast. The shell beeps if there's an ambiguity in the attempted completion. That's a normal part of work. But when it inserts 1 second delay in your typing, that's really annoying.
    Similar problems in Xcode. System beeps are common. And typing stops while Xcode waits for the sound HW to wake up.
    There's a really old app called "keep sound awake" (or something like that) designed to deal with this problem. It plays a silent sound periodically to stop the sound device from entering sleep mode. But it also prevents the system from sleeping, which is not good, is ancient and buggy. I can't use it.
    It's still driving me nuts. Does anyone have a clue what to do about it?

    Try zapping the P-RAM
    http://support.apple.com/kb/HT1379
    also are you using external speakers?

  • T440s - The good and the bad.

    This is my honest opinion that I'm posting here so that I may assist in anyone looking to purchase a T440s.  I ended up sending mine back and obtained a MacBook Pro 15 Retina, which now runs Windows 7 flawlessly.  I'm not here to discuss my Mac (and I still hate Apple as a company, lol), but I want to share the good and the bad things about my T440s experience:
    The good:
    - Oh so stylish... I love the minimalist business-like look.
    - Very light.
    - Very good screen (in my opinion... I got the HD version).
    - Fairly capable performance-wise.  It calculated a Fibonacci(1 through 50) in C# in 20 minutes and some change, which was not as good as the other-mentioned laptop, but it was still pretty decent.  It also did amazingly with VS 2013 and Blend open at the same time.  No hang-ups, nothing.  And that was only with 4GB RAM, since I didn't install the 8GB stick (had no time, because of the repairs... more on that later).
    - Battery life is superb.  Under full-on stress, which most people would never unleash on this machine, I was able to get 1 hour and 42 minutes out of it.  This was done using Battery Eater.  Therefore, one can easily expect 4+ hours under normal development.
    - Good build, except the touchpad (more on that later).
    - Amazing keyboard.  I'm speechless.  That thing was a dream to type on.  I would compare it closely to my mechanical keyboard.  Obviously, it's not as good, but I've never felt a better keyboard on a laptop.
    - The fact that it has an internal and an external battery.  Hot swaps with spare packs... how awesome.
    - Very slim, in my opinion.
    The bad:
    - The touchpad is horrible.  It feels like a two-cent piece of junk on a $1,500 laptop.  As soon as I got it I couldn't believe it.  My wife was in shock too.  It was very loud, even with light clicking and the rattling sound after the click was horribly annoying.  I sent it in for repair, and instead of fixing the touchpad (regardless of whether a new one was put in), they ended up misaligning the keyboard bezel, so the right side is popping up slightly as if it was forced onto the body.
    Mind you, it's not like I was overly picky or anything.  This is a known problem, but I didn't do my homework prior to the purchase.  Also, the original gentleman on the phone (who was pretty awesome comparing to others) said himself that it was strangely loud.  I clicked it very softly and he was able to hear it on his side without my phone being on speaker or anything.  He tested a model next to him and I couldn't hear it.  He said his touchpad was very quiet.
    - The drivers for the touchpad are pretty atrocious.   I was able to get it to 80% efficiency, but the cursor still jumped around when clicking once in a while.  This created a lot of frustration, as things were closed or opened accidentally.
    - This is not particular to the laptop, but to the company... the customer support was horrible.  Most of them were polite, except the person that closed the chat session on me when I decided to question why the keyboard bezel was being replaced...  and him closing the chat session was not a technical issue (I asked the next rep to explain).  However, nothing got fixed and the laptop came back in worse condition than I sent it in.  I mean... it's a 2-hour old laptop and it already has misalignments and a scratch.  Yes, I forgot to mention that.  On the right side, it appeared as if they were trying to pry it open and put a slight scratch there... not ridiculously important, because it does not alter the performance and it was not very noticeable, but when coupled with the rest of the things... yeah, no go.
    Would I recommend this laptop?  If you don't expect a good touchpad and never care to get it fixed, sure.  I would love to own if it had a different touchpad... but I'll just revisit this idea in five years or so.  You might also get lucky and get one that doesn't have the touchpad problem, but this might be a rarity from what I see on the forums.

    @bkboggy: the only solution is that you should tap gentle and softly that you won't produce a click
    Maybe You should go for an on-site guarantee, that might help not sending back Yours t440s
    Regards,

  • Lost all my sound when playing movies and shows from internet

    i seemed to have lost all sound when playing movies from internet.  i still have "system" sounds and beeps?

    The speaker is not that good but maybe yours is defective if you have the volume fully raised.
    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted and have a poor contact.
    Try the following to rule out a software problem
    - Check also Settings > General > Accessibility > Hearing. Make sure that the sound balance is not set all the way to "R" or "R".
    - Reset the iOS device. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iOS device.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack or other hardware problem.
    Apple Retail Store - Genius Bar

  • No sound when playing burned DVD with Windows Media Player

    Hello!
    I made a 10 minute movie which I burned , tested and delivered today.
    But it turns out that when playing the DVD with WMP, there is no sound.
    I had tested the movie playing it with powerDVD, and it worked as it should. When playing it with a normal DVD player and TV it works allright.
    But I had not tested it with WMP. And sure enough, when playing it with WMP there is no sound!
    The ones who will show the DVD will do it from a computer to a video projector, and maybe they don't have a "proper" DVD program installed. But I heard that there was sound when playing with "VLC" which is a relief.
    But I feel the need to get to the bottom of why there is no sound with WMP? Any clues?

    In NTSC-land, one has but two choices: PCM/WAV or DD AC3, which is a particular "flavor" of MPEG. In PAL-land, one does have the option of MPEG (not DD AC3) as an option, but that seems to be falling out of favor.
    When MS was re-tooling WMP, they wanted to add back the functionality of commercial (pressed/replicated) DVD's, but sought to limit any burned DVD's. Do not know what the mindset is now, so much could have changed with a few iterations of WMP. I have to admit that I just do not reach for it that often.
    In the Project, or Disc, menus, one can tell En which Audio Transcoding to use. As John T, suggests, I would definitely do a test with PCM/WAV, and X my fingers.
    If your client(s) is/are set on WMP as the player, there is hopefully a scheme that you can get to work. Also, remember that some older versions of WMP might not play the DVD at all, unless one finds the right plug-in, that basically hacked the intended setup in those older versions. Just like when delivering to a client, and not knowing their systems' calibration, or setup, trying to cover every base in a particular player software might involve a lot of work, and prayer.
    Good luck,
    Hunt

  • Sound not playing on emulator

    Hi everyone
    Im developing a flash lite 2 game and im trying to play mp3
    sound effects ive imported to the projects libary but when I run it
    on the Nokia 5300 and 6300 emulators the sounds dont play.
    Im using the following actionscript to load and play the
    sound.
    var pop:Sound = new Sound(this);
    pop.attachSound("popsound");
    pop.start();
    Im using mp3 compression at 8kHz sample rate
    16kbps
    Quality fast
    export for action script is selected and the identifier is
    the correct name
    What is it that im doing wrong any help greatly appreciated

    When I play the zipped fla file in Device Central, it works
    fine with flash player 5 and >. However, when I publish the
    settings to play in Flash Lite 2.0, the output screen comes up with
    the error: FLERR bad sound error. I changed the mp3 to different
    MHz but no luck. Please let me know what am I doing wrong.
    www.adobe.com/devnet/devices/articles/mp3_sample_fl2.html
    (fla file and mp3 can be downloaded here).

  • Flash animation with stream sound not playing in mac

    Dear all,
    I have made a 5 min animation with stream sound. Its playing perfectly in PC. But in mac, its not playing. Stream sound starts from frame 60. So mac plays the swf plays till 60 frame, after that it pauses. I tried importing different sound format (wav, aif, mp3) and tried with all sound export setting but the problem remain same; its playing only till 60. When i removed the sound, it played till end. Even with event sound, it plays till end. But with stream sound, the problem. The problem is only in mac; in pc its perfect.
    I am using VMware Mac OS x leopard in window xp for testing purpose. I tested it in laptop with mac; but the problem is same. What could be the solution?
    Thanks in advance. Waiting for solution.
    Bhushan Pradhan
    spherenepal.com

    Dear all, I solved the problem myself. The problem was with the sound driver of mac. After installing sound driver, the problem is gone. Bhushan

  • No sound effects playing through any output device

    Hi all. I have a frustrating issue with my late 2012 Mac Mini that started a couple of days ago. Maybe it is related to a system update (I think a OS and iTunes update was available last week) but I am not sure. Have checked that all preferences are correct (sound output, midi) and basically I have not personally altered any preferences whatsoever since I replaced my old HT receiver before Christmas.
    The issues. I have no sound effects at all playing either through HDMI (cable to Pioneer SC-LX56) or internal. No trash can, no start up, no nothing. I have no sound when playing Spotify or iTunes. I get sound in Plex HT but the navigation sounds are gone. Normal playback of any movie or music works as before.
    Anyone have any suggestions?
    Thanks,
    Roger

    Hi den.thed and thanks for your reply. Yes, all these are checked and togglig the various output devices I have makes no difference. As I said everything worked flawlessly up until a couple of days ago and no changes apart from Apple SW updates (OS and iTunes). My Plex Home Theater (the only working sound output means at this point, even though navigation sound in Plex HT has also stopped working) and Media Server apps are unchaged as well. All other HDMI inputs on my HT work.
    Further information. The volume icon in the menu bar is greyed out btw. I can toggle and see what output device is used but not change volume by sliding the bar. I am unable to change the alert or output volume as in your snapshot unless I chose internal speakers but this has no effect as there is no sound. I have looked into midi and it looks fine but I do not get speaker tones to test my speakers (I have not fiddled around in there before so what is there has been since i took the Mac mini into use). I have stopped the coreaudio process and rebooted but no difference. The only thing I have not done is  PRAM reset as far as browsing the Apple support community has taught me so far.
    I really appreciate all support here.
    Thanks,
    Roger

  • No sound when playing videos/youtube but speakers work

    No sound when playing videos/youtube but speakers work. Mute is not on that I can see. Volume is maxed. Devices are enabled. Speakers tested. Have tried with and without headphones. 
    I tried to do a Driver Update but Toshiba Support doesnt recognize my model/serial numbers so I dont know what Driver to use. 
    I have a Satellite C50-05U
    Model number PSC12C-05U00S
    Serial number XXXXXXXXX
    I tried a restore from previous backup but it hasnt helped. any suggestions? 
    [Moderator edit to remove serial number.]
    Solved!
    Go to Solution.

    I tired this and it worked:
    Adobe Flash Player plug-in
    https://support.google.com/chrome/answer/108086
    Adobe Flash Player is directly integrated with Google Chrome and enabled by default. Available updates for Adobe Flash Player are automatically included in Chrome system updates.
    If you want to use Adobe Flash Player in other browsers, you’ll need to separately download the Adobe Flash Playerfor those browsers.Enable or disable Adobe Flash Player
    These instructions apply to Google Chrome on Windows, Mac, Linux, and Chrome OS.
    Type chromelugins in the address bar to open the Plug-ins page.
    On the Plug-ins page that appears, find the "Flash" listing.
    To enable Adobe Flash Player, click the Enable link under its name.
    To disable Adobe Flash Player completely, click the Disable link under its name.
    Note: If you've previously installed Adobe Flash Player separately, you'll see two files listed for the plug-in. If both are listed as enabled, the version bundled with Chrome will be used. To enable a specific version of Adobe Flash Player, clickDetails in the upper-right corner of the page. Then click the Enable link for the version of Adobe Flash Player you want to enable. The table below shows the filename for the version that is integrated with Google Chrome. more at the link above ..... 

  • Windows Server 2012 R2 RDWeb - Sound Not Playing

    Hello,
    I am trying to get sound to play on Internet Explorer which is published through RDWeb.
    I am using a sound test page which works fine (http://www.audiocheck.net/audiotests_stereo.php) locally but will not play sound through RDWeb.
    The Windows Audio and Windows Audio Endpoint Builder services are running on the Remote Session Hosts and Remote Web App server. The settings under "Collections > Remote Apps > Client Settings" are all ticked (Audio and Video Playback, Audio
    Recording etc). I haven't come across anything else online of settings to check.
    Does anyone know why this isn't working?

    Hi Chris,
    Thank you for posting in Windows Server Forum.
    Have you check the group policy setting related to audio redirection?
    Here I would like you to verify whether you have enabled Audio and Video Playback Gpo setting on RDSH server. 
    Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Device and Resource Redirection
    Allow audio and video playback redirection: Enabled
    Allow audio recording redirection (For recording): Enabled
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    TechNet Community Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Audigy 2 NX - intermittent interrupted sound while playing 997Hz sine wave f

    I just now bought Audigy 2 NX last week. When I play a 997Hz -3dB sine wave sound file, the sound coming out from SPDIF and analog output jacks are not continuos, it is interrupted intermittently. The sine wave audio file is provided by a famous audio instrument company Audio Precision. I must play the sine wave file to verify my Audigy 2 NX. Unfortunately, the sound is not continuos. The sine wave file can be played very smoothly a nd correctly on other notebook PCs. Is there any one who knows what happened to my Audigy 2 NX ?
    Why do I play the 997Hz sine wave file ? I am responsible for design notebook PC hardware. I must test my audio design to see if I can pass Windows Vista Logorequirements or not. My company bought the Audio Precision instrument for the test. In order to test Microphone Input characteristic with the instrument, I must buy Audigy 2 NX to play the recorded audio file. Audio Precision recommend me to buy Audigy 2 NX for the measurement. The analog output of Audio Precision is connected to the Mic-In of my notebook PC. The notebok PC will record the 997Hz sine wave sound from Audio Precision. After recording the sine wave sound, I play the recorded file on my notebook. The file will be sent to Audigy 2NX from USB port, and then the Audigy 2 NX will send the sound to Audio Precision through SPDIF. Audio Precision will analyze the sound coming in from the SPDIF port. So I can measure Mic-In quality.

    Nikopoika wrote:
    I have same kind of problem with my "Soundblaster Audigy 24-Bit", cos' I can't enable the "Advanced HD" effect in FEAR and Quake 4. I've heard that it can be fixed with a patch but I'm not able to install any of these patches I have downloaded from creative.com, everytime I try to install some of these patches it causes a fatal error which says "Make sure you have installed previous drivers correctly". I have tried everything but nothing seems to work.
    Hello fellow sufferer
    As I've found out so far the Advanced HD in F.E.A.R. is EAX Advanced HD 4.0 and our SoundBlasters are, whysoever, limited to EAX 3.0. I guess the patch you tried to install was the EAX 4.0 patch for the Audigy 2 series (of course my NX is not included,arghh...).
    When I read "EAX ADVANCED HD Game Effects deli'vers mind-blowing gaming realism." in the Audigy 2 NX description on the creative site I did not realize that this "mind-blowing gaming realism" is strictly limited...

  • Sound stop playing during video playing on ipad 1 with ios 5.1.1

    after updating my ipad 1 to ios 5.11 the sound on my ipad sometimes stops suddenly. it happens during video playback, music listening or just text typing on keyboard.
    i ve tried all the advices seen on communities and no one worked for me (restore the system, change the lock screen button configuration, clean the headphone input, test with apple headphones...)
    please help me to find a solution and thank you for your help.
    another information : when sound stop playing, sometimes when i lock the ipad, a strange noise comes from the speakers like a larsen.

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
     Cheers, Tom

  • [SOLVED][KDE4]Only system sounds will play

    I'm not sure if this belongs here or in the DE section, so please move it if you see fit.
    I'm having a bit of a tricky issue with KDE, all the system sounds will play, but nothing else. I'm currently using the gstreamer phonon backend with ALSA. I've seen some forum posts from the gentoo wiki with similar problems but it seems it was just a mixed mess of deleting .folders and other configuration files. I've also tried to use the VLC phonon backend but to no avail either. I'm wondering if anyone else has this problem and has a coherent solution.
    So far I've tested playing audio files in VLC and videos on youtube. My alsa device is fully configured and will play audio, just not output from programs that are not part of the plasma environment. I have also looked to the wiki for a solution but it only seems like it has solutions for audio conflict problems, which is all sorted out for me.
    Last edited by jjsullivan (2011-05-25 04:22:50)

    i recently had a gstreamer issue that i solved today as well.  run a pacman -Ss gstreamer0.10 to see which packages you have installed.  you might need to install the gstreamer0.10-plugins group of packages, as i did.
    this might be completely different from what i went through, since i'm not using phonon or kde, but it's worth a shot.  worst case scenario is you uninstall the extra packages afterwards.
    another option to try (which didn't help me, but was a solution for SOMEONE i found through my searches) was to compile and reinstall a fresh version of the gstreamer0.10 package.  abs makes it so simple to do, it's also worth trying.

Maybe you are looking for