Sound on slides does not play after first slide.

I created a presentation with 5 slides. I put the same sound file on each of the 5 slides. The slides are setup to play automatically.
If I play the presentation in Keynote, it works perfectly.
I exported to html and put on my web site. If I view the presentation in Safari the slides load one after the other correctly, but the sound only works on the 1st slide. On slides 2 thru 5, the sound only plays for about 1 second and then quits.
If I view the presentation using Firefox, nothing works, slides do do load correctly, and no sound at all.
I exported to Quicktime and played it, and the quality is so bad I can barely see what is going on.
I installed a new Keynote app from app store, and same problems.
Any ideas?
Thanks,
Lewis Poteet

also regarding pentiun 4's --
see link at :
http://technet.oracle.com:89/ubb/Forum42/HTML/000380.html

Similar Messages

Rented movie does not play after download if not connected to the internet

rented movie does not play after download if not connected to the internet

Hello b noir.
Thank you for your interest in solving my problem.
What I did I opened iTune. I read the information about what does my computener need to play back a rented movie. My computer is okay to play back rental movies. So I went to the iTunes store, I searched for the movie I want to watch, i singned in into my Mac account and I bought the movie. The movie started to download to my computer, it took some time because I bought a HD version, but it never stop and after a couple of hours or little less the movie was in the Rented folder of my iTunes and also I checked to be sure that was in the movie folder. So, next day I open iTunes and click on the movie, it opens but I wait for five minuetes and never started to play back, so I tried several time and I looked for info in different internet forums but I couldn't find anything that help. So I posted the problem in this forum and also I called Apple. Apple contacted me and they let me to download the movie again. So I did it and now I will watch the movie later. Not sure if the movie will play back normally or if I am going to have the same problem. I'll keep you posted.
Apple representative did not know why this happened.
Thanks.

11.0.5.5 64-bit on Win 8: music does not play after update

Recently prompted to update itunes software to 11.0.5.5 64-bit (Win 8). Did so and now music does not play. Music library is correct but when I select a song and then push the "play" triangle itunes says it is playing but tracker does not move off of "0:00". Any ideas?

The issue is probably not the machine you purchased the music on. The issue is very likely the Apple ID you used to purchase the music.
It sounds like the music being skipped on your iPhone 5 was purchased with some Apple ID that is not currently authorized in the iTunes (on your computer) that you sync to. So you should go to that computer, open iTunes, do Store > Authorize This Computer from iTunes' menu, enter that Apple ID and password, then sync your iPhone 5 to that iTunes.

Slideshow Does Not Start at First Slide

Using Keynote '09, I recorded a voiceover for the third slide of a presentation. Now if I play the slideshow, the presentation will not start at slide one. (Yes, I select the first slide to begin. No go.) The presentation begins at the slide with the voiceover. If in Document Inspector I select "normal" or "self-playing," the show begins at the first slide, but there is no sound. When "Recorded" is selected, the voiceover plays, but the slideshow begins with the recorded slide. Any help appreciated.

You're running the slideshow directly from an album or an Event, correct. This has been a problem for a number of users and there's not been a fix discovered.
Many found that creating the slideshow in the slideshow mode will eliminate that problem.
Give us details.
OT

SWF does not play after publish.... OS compatibility bug?

I have embedded SWFs that will not play once the Presenter file is published. They appear to be "frozen" on the first frame.
Here's the setup:
The SWFs are scripted in AS2 (not AS3)
SWFs are built in Flash Pro CS5 and are published to Flash Player 9.
They are not Captivate files.
PowerPoint 2007 (12.0.6535.5002) SP2 MSO (12.6535.5002)
Presenter 7.0.5 Build 7588
Microsoft Windows 7 Pro 64bit
BUT, I can open the same file on another computer with this setup, and it publishes just fine.
The SWFs are scripted in AS2 (not AS3)
SWFs are built in Flash Pro CS5 and are published to Flash Player 9.
They are not Captivate files.
PowerPoint 2007 (12.0.6535.5002) SP2 MSO (12.6535.5002)
Presenter 7.0.5 Build 7588
Microsoft Windows Vista Business
The only difference appears to be my OS. Does anyone know of any bugs with Presenter in Windows 7?
UPDATE:
As I type this, literally, I got a notice that there's a Presenter 7.0.6 Update. So I went ahead and installed it on the Windows 7 box. Republished the Presenter course, and wouldn't you know it... the SWFs are now playing!
The patch says this: The Adobe® Presenter 7.0.6 update resolves Adobe Presenter's compatibility issues with PowerPoint 2010 and some important issues identified in Adobe Presenter 7.0.5 (Although the patch site doesn't bother providing us with a list of what those important issues are! Thanks Adobe, you rock.)
--- Well, it fixes MY issue for Windows 7/Presenter 7/PowerPoint 2007 too.

See the updated within the post. Installing the 7.0.6 patch was the fix.

Keyboard shortcut does not work on first slide in Web Browser

I'm using a workbook to learn Captivate.
I added a keyboard shortcut, the Enter key, to buttons on the first and second slides.
When I preview the project in Captivate, the shortcuts all work.
When I preview the project in a Web Browser (specifically Firefox 3.6.16), the shortcut does not work on the first slide, but does work on subsequent slides.
Any ideas why this would happen?

Welcome to our community
The issue is typically a matter of focus. Particularly in Firefox. In IE, when the page loads and is presented, the Flash object (your Captivate movie) is given focus. So the keyboard shortcuts work. But that doesn't happen in Firefox. In Firefox, you must first click somewhere on the Flash object to give it focus. From there forward, shortcuts work because the Flash object is now listening for them.
In every class I facilitate I demonstrated this and advise that it's a good idea to have a button on the first slide. This serves two purposes.
It forces the user to click to proceed
It keeps the first slide paused until the user is ready
Yeah, before someone comes along and says: (in an annoyingly nasal tone) Mr. Man, you KNOW there is an option in Captivate to keep it paused at the start... I'm well aware that Captivate offers this option without adding a button, but I prefer it for the reasons above.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Firefox does not open after first try

When i click on firefox, it does not open. After Several times trying, it might open. Sometimes I have to click open new tabs to open this. Why is this happening?

Hi,
You can try to right-click and Unpin the icon from the taskbar and then Pin it back from the Firefox [http://kb.mozillazine.org/Installation_directory installation directory], usually C:\Program Files (x86)\Mozilla Firefox\.
Another possible reason could be that the installed security software is delaying the start (McAfee??). You can try to fully trust Firefox and its related processes/files in the different McAfee configuration areas (e.g. process/sub process control, file modification, HIPS etc.). You can also try to disconnect the internet connection, temporarily disable McAfee, restart the computer and check.
[http://kb.mozillazine.org/Firewalls#Firewall_pitfalls Pitfalls]
[http://kb.mozillazine.org/Firewalls AV/Firewalls Configuring AV/Firewalls]
[https://support.mozilla.org/en-US/kb/Firewalls AV/Firewalls configuration]

Slides in Simulation Stop After First Slide

After I published a training video as a swf file in Captivate 5, it only plays the first of 193 slides. It does not automatically move forward to the next slide with audio. What am I doing wrong?

Hi all
Hopefully Lilybiri will forgive my intrusion into her thread.
From what I'm seeing it would appear that during recording you selected both Demonstration as well as Simulation modes. You also mention FMR, but because things are pausing and you don't want them to, I'll assume you aren't talking about FMR here.
Note that when you choose multiple modes of recording, you are creating multiple projects. A demonstration does just that. Plays through as you are seeming to want. No pausing. A simulation pauses as it attempts to provide a simulated experience for your end user.
It sounds like Captivate is presenting the Simulation first. You are seeing this and assuming it's the only project? Look at the tabs when you finish. There should be more than one. One should be a Demo and the other a Simulation. If you have closed things and restarted Captivate, look at your recent projects list. You should see the Demonstration there.
Hope this helps more than hinders... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Why does a sound from Jampack suddenly not play (after it was working fine)

Have a track-----French Horn part written in and was all playing fine. However, at a certain point it just won't play the French Horn part and/or even play the french horn sound or any of the new horn sounds. But the part is there (i see the midi notes and it plays it back on just a piano sound).
Nothing muted/soled, etc. However, if I start an entirely new session/song, then it plays back a new horn part fine.
Even if I create just a new track it won't play the part on the old session.
Thanks for your help.

timrohrer
What you are reporting is a known Premiere Elements 12 issue, the loss of sound from numbered Audio Tracks and Soundtrack after narration has been added to the project with the program's Narration Tool.
It was only looked at in another thread earlier this evening and resolved.
Premier Elements 12 for Mac - After narration, only Narration track plays back.
The fix suggested by Llamadude99 and variations there of seem to be the answer. Please go through the link above and the links within in the for even more background on the issue. I have not been able to reproduce the problem in Premiere Elements 12/12.1 Windows with a desktop microphone (computer jack connection) in order to get at the core of the issue first hand.
Some background questions...what computer operating system is your Premiere Elements 12 running on? And what type of microphone are you using for creating narration with the Premiere Elements 12 Narration Tool? Are you using Premiere Elements 12 or the Premiere Elements 12.1 Update obtained via the project's Help Menu/Update?
Please let us know the outcome.
Thank you.
ATR

Task Sequence (LiteTouch.wsf) does not restart after first logon on Windows 8.1 deployment

Hi guys!
I can't figure out what cause the issue.
First, this is my setup :
ADK installed
MDT 2012 (upgraded from 2010 update 1)
Boot wim regenerated from scratch
LTIApply.wsf edited http://support.microsoft.com/kb/2797676/en-us
Windows 8.1 configured and captured (my first Win 8/8.1 deployment)
New task sequence for that wim.
My issue is :
The task sequence windows won't show up only with windows 8.1 deployment after the first logon. (I tried with a Windows 7 with the same setup, works flawlessly)
I can see the desktop, but nothing show up. I have all the folders and files on the c: (MININT, _SMSTaskSequence LTIBootstrap). I clicked twice on LTIBootstrap, did nothing. I did an LiteTouch.wsf /start, nothing.
I recaptured my Windows 8.1 (it was on a virtual machine) and I did a new TS. The issue still there.
All the SMSOSD logs files are on http://sdrv.ms/18VPSKy
Someone can help me on this? I'll be very happy!
thanks!

Was this ever resolved or does anyone have an idea how to fix it?
I am having a similar issue. I deploy a custom Windows 8.1 image to a system and I get through the OS install, but I end up at the user login screen without the task sequence resuming (thus not running any windows update, doesn't join domain, or any post-install
tasks). The built in administrator account also shows up as disabled.
The only changes I have made to the unattend.xml for that image are *maybe* to fix the IE 10/11 error that crashes the deployment by deleting the IE welcome tag, and I have no choice but to make that change when it happens.

Music Videos - have sound but video does not play in windows 7

I have windows 7 and the latest version of Itunes.
Most everything seems to be working ok, but when i try to play a music video i get the sound ok, but the video never starts, it just seems to stay on the first screen shot and never changes, even when the next video starts.

Not sure why, assume you got the 32-bit version if that is what you run, and this is quicktime? maybe you need a different codec or application for the movie format; or didn't associate the file type...
but if it deals with iTunes you will find more help in iTunes Windows:
http://discussions.apple.com/category.jspa?categoryID=150

Itunes does not play after importing into timeline

I have looked at similar topics in this discussion forum but still unable to get the answers.Basically the problem is that after importing (purchased) itunes(6) music(and it imports OK)there is no music when played back in the time line.In the imovie palette (audio view) the itunes music plays normally.CD is also greyed out even if there is a CD in the CD drive,so obviously CD tracks cannot be played.Itunes 'by itself' plays normally and CD is also recognised.Voice overs thru microphone,original audio from footage also plays normally.All boxes ticked on the right/computer volume set to high etc so setting seems allright.I am using formac studio to import analogue footage and can hear the original sound when importing.Using imovie 3.03 on ibook.this may/maynot be relevant-on the G3 imac in imovie(3.03)the itunes/CD tracks imports and plays on the timeline,however the original footage soundtrack sounds like gunfire from a machine gun.It is normal with the imported itunes soundtrack switched off.
Grateful for any thoughts/adv
rav
ibook 800mhz G4,imac 400mhzG3 DVSE Mac OS X (10.3.9)
ibook 800mhz G4,imac 400mhzG3 DVSE Mac OS X (10.3.9)
ibook 800mhz G4,imac 400mhzG3 DVSE Mac OS X (10.3.9)
ibook 800mhz G4,imac 400mhzG3 DVSE Mac OS X (10.3.9)

Hi rav - are you sure that if you have a CD installed you cannot see its tracks in the Audio Pane? Even though 'Audio CD' is greyed out, the contents of the CD are still there and accessible.
Can you convert the track to mp3 format? iMovie does accept mp3s. Doing so might break the deadlock.
Sorry, I can't help with your other audio issue.
G5 Dual 2.0 ghz Mac OS X (10.4.3) 1.5 GB RAM; VidCam: Sony DCR TRV80E

Windows 10 - No sound and mediaplayer does not work after upgrade

Hi !I can't get the sound to work after upgrade to win 10, - and windows mediaplayer will not openmp3's -- I get video on the VLC - but no sound... If anybody can help me, - please post a direct link to the driver I have toreinstall.. Thanks CarstenNorway

Thanks for the answer- but I mangage to solve the problem my self this time... I just did go to controlpanel - and clicked right button on the mouse - and updated both sound drivers thatI did find in there. After restart of the lap - everything worked ut well.. I am supprized !! Carsten

HT204370 Downloaded movie not playing after first time

Purchased and downloaded a movie yesterday (have confirmation email of purchase). Able to watch movie once. Tried to watch again, but received message "You do not have permission to access the requested resource". Why am I getting message if I have proof of purchase?

Trashed the video file and redownloaded.
Exact same thing. Doesn't play for more than a couple seconds.
Infuriating, and zero responses yet. Is there a point to posting on here when 99% of the questions I see are unsolved or completely ignored?

Search window in safari does not work after first search item

After browsing on web page, entering search term in the search window results in no search. The window will not reset(set default to google)and will not search. Only way of searching is to quit safari, retype or paste the search term ( which is saved as "%20 "indicating that safari interprets this as a web page??).
Very annoying. Is it to do with safari and linking your webpage/browsing experience???

Hi,
Go to these 2 locations to see if you have any 3rd party extensions and move anything present in them onto your Desktop to deactivate them:
/Users/YourUsername/Library/Input Managers/
/Library/Input Managers/
Restart Safari to pick up the change. If it works now, you can try moving the items back one by one until you find the culprit.

Sound on slides does not play after first slide.

Similar Messages

Maybe you are looking for