Sound on the video works, but not when music is played

does anyone know what could be the problem?
  Windows XP  

Oops, just read your question again. duh. Still could do with a bit more clarification of the problem? Cheers.

Similar Messages

  • HTML video works but not when publishing in MUSE

    I threw this together without using MUSE - Just a test video that I made in Dreamweaver.  The reason why I'm posting this in MUSE as well as DW forum is because maybe I'm not doing the "5" code correctly.  anyway --:
    http://designerandpublisher.com/html5/video.html
    the HTML5 video above plays great on my desktop as well as on my mobile device.
    So now, I opened up MUSE and made a test phone web page.  I embedded the necessary HTML5 code.  The video plays fine on my desktop but will not play at all on my mobile device (Galaxy Note ii).  It seems to start, then freezes, then craps out.  Here it is:
    http://designerandpublisher.com/hawaii/mobile/
    What I can't understand is why am I am all of a sudden having problems with MUSE playing video files made for mobile when the original DW test I made works perfectly?
    Please advise.

    the OGV and WEBM files work fine in the first test.  those files are also present in the 2nd test, so why isn't the 2nd playing like like the first one?  as for the FLV that's something i can do for mozilla but my main concern is the playback issue with the MUSE test - all works fine in the first example but not in the second.

  • Two Macbook pros circa 2009 in our temporary household in Turkey suddenly failed to boot and got stuck on the grey screen. They were able to boot at the Apple store, but not when we brought them back to our apartment. Could this be a coincidence?   A

    Two Macbook pros circa 2009 in our temporary household in Turkey suddenly failed to boot and got stuck on the grey screen. They were able to boot at the Apple store, but not when we brought them back to our apartment. Could this be a coincidence?   A

    THank you Ogelthorpe. When my wife's computer I went on line to the site that you sent and tried everything But nothing worked. When my son came to visit and his MacBook Pro did exactly the same thing we became suspicious - too much of a coincidence. We took both computers somewhere else, out of our apartment, and they both booted. We ran disk utility on both, but the report in both cases was that there are no issues with the hard drive.  Back in our apartment neither will boot up. My MacBook Pro is a later model with a solid state drive and it seems to work fine here.. I tried an external drive and it works fine. We think that this has something to do with some kind of magnetic interference in our apartment to which the 2009  drives are susceptible.  It is indeed a mystery!
    alf

  • HT5105 I have been trying to create a multicam clip from two camera's. They sync properly when using the sync feature but not when I use the multicam feature does anyone know what I may be doing wrong?

    I have been trying to create a multicam clip from two camera's. They sync properly when using the sync feature but not when I use the multicam feature does anyone know what I may be doing wrong?

    Probably best if you could post screen shots of the Inspecror window in extended view with a couple of the clips you using for the 2 angles.
    If you have audio from both cameras and have identified them separately, the sync is usually pretty reliable.
    Russ

  • Ipod is synced but not all music will play. The music shows on the Ipod but not highlighted and cannot click to play.

    Ipod is synced but not all music will play. The music shows on the Ipod but not highlighted and cannot click to play.

    Provided the music plays in iTunes on the computer
    Try:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync/delete all music and resync
    To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       

  • Sound through hdmi to my tv works but not when watching video online like 4OD

    the sound through hdmi to my tv works with music and videos I have downloaded, but not when watching video online like 4OD and youtube.
    How can I get it to work?

    Ok so I happened to figure it out while on the phone to apple support. Even though the guy was very nice, I think I knew more than him! He was explaining very basic resolution principles I played about. I had the second option in displays resolution. All I did was unplug the HDMI cable, click on 'best for display' then plugged the HDMI in and my resolution on the normal monitor changed to the normal blue, then went black momentarily and then changed to a strange resolution but another window appeared that said SONY BRAVIA HDMI at the top! Hey presto! Don't know why it didn't do it yesterday - I probably left the HDMI cable in or something! Oh well. Problem solved!

  • I can import my first clip to the video library, but not the second clip. I tried dragging-dropping and using the "E" key, but only the first clip will show up in the library. I use IMovie 9.0.9 and OSX 10.8.5. with no problems until yesterday.

    I can drag my first clip from the New Event window into the Project Library, but not the second. I can highlight the second clip in the New Event window, but it won't "drag". The "E" key works for the first clip, but not the second.I've been using IMovie daily and the problem just appeared. No upgrades to the computer and no new software installed.  IMovie 9.0.9 and OSX 10.8.5

    Thanks victoryhat.  I learned some new things from this very clear tutorial.  But it didn't answer my question about why the titles don't stay with the video when I export it.
    He did mention something that might be a clue however.  When he talked about importing a title he created as an image, he noted that he was careful to make the image the same size as the video he was adding it to: 1280 x 720.  Since I took the video with an iPhone in the vertical position, my video image isn't the same size and orientation as the titles.
    Maybe there is a way I should be setting the screen for this size???  I'll go back and play around.  Meanwhile thanks for alerting me to Gary Rosenzweig's MacMost tutorials.  Very clear.  I'll look for more.

  • Inspire P7800 Speaker only works alone / not when other speakers play.

    So i set up the speaker system, yes everything is plugged in, no I do not have a Creative soundcard, so i just upmixed from 5.1 to 7.1 so my side speakers play. Everything is great except for my top right speaker. It seems not to play at all, no matter what jack i put it into, so I assumed it was broken. However, it only does not work when I play music, when I test to see if the speaker works through SoundMax, it works when I cycle sound to each speaker in turn, but not when i play all the speakers at once. Any help would be appriciated.
    Thnx,
    Gasior77

    nvm i got it now, sorry lol

  • Sound card works but not when rebooting

    i followed all the steps...
    alsaconf
    alsamixer
    /etc...noise.wav
    alsactl store
    edited the rc.conf
    sound works but when i reboot, before the root i get the error... sound card not found?

    check in rc.conf and see if your sound module isn't listed. Odd that it doesn't find your sound card on boot.
    U may also need to run alsactl store as root. Permission problem, possibly?
    sounds like alsaconfig is finding and loading the module each time u reboot, but its not being loaded because I think u need to run alsactl store as root, since it needs to be loaded by the kernel. That would require root privileges I would think. That's my best guess.
    Last edited by jacko (2008-01-10 22:38:10)

  • IChat works but not when I want video chat?!

    Hi
    On my MBP the iChat work perfect, but on iMac does not want to go on video. Gives me an error and ask to be reported to Apple( which I do all the time). The network is the same, same firewall same 10.5.2.
    Anybody can give an idea.
    Thanks
    Message was edited by: agiamiul

    Go to settings/music/volume limit tap on that.  Make sure it is set to OFF and when you tap it that the slider is at max

  • Sound problem - ear-phone works but not the internal speakers on my Probook 6440b

    Ear-phone works fin, Skype works fine but all other sounds (spotify, media player, itunes ) do not work when unplugging earphones.

    Did you solve this problem? Because I have the same one. My speakers doesnt work, but all other part (headphones, microphone) works fine. Its realy bit problem for me. Please can you help me? I have last version of sound driver installed.

  • Report works but not when scheduling

    Hi,
    I have a report that copies table contents to a text file. When using this report from se38 everything works but every time we schedule the job from sm36 it gets status cancelled.
    The input to the report is what table should be copied and where it should be copied to.
    The error message is from sm36 job scheduling is: "Could not ascertain code page"
    Message class: FES
    What does this mean?
    regards
    Baran

    Where do you download the text file to?
    If you try to save to your PC, it will never work.
    You can not download to a local drive, only to UNIX or print the file to the spool. Then, later, you'll need to retrieve it either from UNIX or from the spool.

  • Acs 4.2 :- router# test aaa group tacacs+ uid pwd .... works but not when authenticating

    I have setup ACS 4.2 and when I run
    router# test aaa group tacacs+ myuser mypasswd [ legacy | new-code]
                   Both options work fine
    But when I try and login, over telnet, the request reaches the aaa server, but returns fail !
    My commands are :-
    tacacs-server host xx.xx.xx.xx single-connection port 49
    tacacs-server key xxxxxxxxxxx
    aaa authentication banner ^CUnauthorized access forbidden^C
    aaa authentication username-prompt "Enter Username: "
    aaa authentication login default group tacacs+ local
    aaa authorization exec default group tacacs+ local
    I dont see the banner NOR the "Enter Username:" prompt.
    Also a debug aaa authentication and debug aaa subsys show that the request reaches AAA, but it simply returns fail
    I had the same issue in 5.1, but that was due to the tacacs+ single-connection not being set or something similar, and the error
    there was "shared secret does not match", on the AAA server logs
    I am still new to 4.2, so am still trying to determine where the log files are etc, but since it works with the test command, I cant
    seem to understand why it fails with telnet
    Any idea why this may be happning ?
    Thanks

    I tried both the sugestion.. no luck
    Below are th eoutput of debug, with some lines in BOLD to help you
    find interesting lines in the log output.
    Thanks
    fixeddemo#sh run | inc tacacs
    aaa authentication login default group tacacs+ local
    aaa authorization exec default group tacacs+ local
    ip tacacs source-interface FastEthernet0/1
    tacacs-server host 10.1.7.15
    tacacs-server key xxxxxxxxxx
    fixeddemo#sh debugging
    General OS:
      TACACS+ events debugging is on
      TACACS+ authentication debugging is on
      TACACS+ packets debugging is on
      AAA Authentication debugging is on
      AAA Subsystem debugs debugging is on
    fixeddemo#
    Jun 17 14:15:54.666: AAA/BIND(00000072): Bind i/f
    Jun 17 14:15:54.666: AAA/AUTHEN/LOGIN (00000072): Pick method list 'default'
    Jun 17 14:15:54.666: AAA SRV(00000072): process authen req
    Jun 17 14:15:54.670: AAA SRV(00000072): Authen method=SERVER_GROUP tacacs+
    Jun 17 14:15:54.670: TPLUS: Queuing AAA Authentication request 114 for processin
    g
    Jun 17 14:15:54.670: TPLUS: processing authentication start request id 114
    Jun 17 14:15:54.670: TPLUS: Authentication start packet created for 114()
    Jun 17 14:15:54.670: TPLUS: Using server 10.1.7.15
    Jun 17 14:15:54.670: TPLUS(00000072)/0/NB_WAIT/45585278: Started 5 sec timeout
    Jun 17 14:15:54.674: TPLUS(00000072)/0/NB_WAIT: socket event 2
    Jun 17 14:15:54.674: T+: Version 192 (0xC0), type 1, seq 1, encryption 1
    Jun 17 14:15:54.674: T+: session_id 3123693045 (0xBA2FC5F5), dlen 24 (0x18)
    Jun 17 14:15:54.674: T+: type:AUTHEN/START, priv_lvl:1 action:LOGIN ascii
    Jun 17 14:15:54.674: T+: svc:LOGIN user_len:0 port_len:6 (0x6) raddr_len:10 (0xA
    ) data_len:0
    Jun 17 14:15:54.674: T+: user:
    Jun 17 14:15:54.674: T+: port:  tty515
    Jun 17 14:15:54.674: T+: rem_addr:  10.1.1.216
    Jun 17 14:15:54.674: T+: data:
    Jun 17 14:15:54.674: T+: End Packet
    Jun 17 14:15:54.674: TPLUS(00000072)/0/NB_WAIT: wrote entire 36 bytes request
    Jun 17 14:15:54.674: TPLUS(00000072)/0/READ: socket event 1
    Jun 17 14:15:54.674: TPLUS(00000072)/0/READ: Would block while reading
    Jun 17 14:15:54.674: TPLUS(00000072)/0/READ: socket event 1
    Jun 17 14:15:54.674: TPLUS(00000072)/0/READ: read entire 12 header bytes (expect
    16 bytes data)
    Jun 17 14:15:54.674: TPLUS(00000072)/0/READ: socket event 1
    Jun 17 14:15:54.674: TPLUS(00000072)/0/READ: read entire 28 bytes response
    Jun 17 14:15:54.674: T+: Version 192 (0xC0), type 1, seq 2, encryption 1
    Jun 17 14:15:54.674: T+: session_id 3123693045 (0xBA2FC5F5), dlen 16 (0x10)
    Jun 17 14:15:54.674: T+: AUTHEN/REPLY status:4 flags:0x0 msg_len:10, data_len:0
    fixeddemo#
    Jun 17 14:15:54.674: T+: msg:  Username:
    Jun 17 14:15:54.674: T+: data:
    Jun 17 14:15:54.678: T+: End Packet
    Jun 17 14:15:54.678: TPLUS(00000072)/0/45585278: Processing the reply packet
    Jun 17 14:15:54.678: TPLUS: Received authen response status GET_USER (7)
    Jun 17 14:15:54.678: AAA SRV(00000072): protocol reply GET_USER for Authenticati
    on
    Jun 17 14:15:54.678: AAA SRV(00000072): Return Authentication status=GET_USER
    fixeddemo#
    Jun 17 14:15:58.794: AAA SRV(00000072): process authen req
    Jun 17 14:15:58.794: AAA SRV(00000072): Authen method=SERVER_GROUP tacacs+
    Jun 17 14:15:58.794: TPLUS: Queuing AAA Authentication request 114 for processin
    g
    Jun 17 14:15:58.794: TPLUS: processing authentication continue request id 114
    Jun 17 14:15:58.794: TPLUS: Authentication continue packet generated for 114
    Jun 17 14:15:58.794: TPLUS(00000072)/0/WRITE/47194394: Started 5 sec timeout
    Jun 17 14:15:58.794: T+: Version 192 (0xC0), type 1, seq 3, encryption 1
    Jun 17 14:15:58.794: T+: session_id 3123693045 (0xBA2FC5F5), dlen 10 (0xA)
    Jun 17 14:15:58.794: T+: AUTHEN/CONT msg_len:5 (0x5), data_len:0 (0x0) flags:0x0
    Jun 17 14:15:58.794: T+: User msg:
    Jun 17 14:15:58.794: T+: User data:
    Jun 17 14:15:58.794: T+: End Packet
    Jun 17 14:15:58.794: TPLUS(00000072)/0/WRITE: wrote entire 22 bytes request
    Jun 17 14:15:58.798: TPLUS(00000072)/0/READ: socket event 1
    Jun 17 14:15:58.798: TPLUS(00000072)/0/READ: read entire 12 header bytes (expect
    16 bytes data)
    Jun 17 14:15:58.798: TPLUS(00000072)/0/READ: socket event 1
    Jun 17 14:15:58.798: TPLUS(00000072)/0/READ: read entire 28 bytes response
    Jun 17 14:15:58.798: T+: Version 192 (0xC0), type 1, seq 4, encryption 1
    Jun 17 14:15:58.798: T+: session_id 3123693045 (0xBA2FC5F5), dlen 16 (0x10)
    fixeddemo#
    Jun 17 14:15:58.798: T+: AUTHEN/REPLY status:5 flags:0x1 msg_len:10, data_len:0
    Jun 17 14:15:58.798: T+: msg:  Password:
    Jun 17 14:15:58.798: T+: data:
    Jun 17 14:15:58.798: T+: End Packet
    Jun 17 14:15:58.798: TPLUS(00000072)/0/47194394: Processing the reply packet
    Jun 17 14:15:58.798: TPLUS: Received authen response status GET_PASSWORD (8)
    Jun 17 14:15:58.798: AAA SRV(00000072): protocol reply GET_PASSWORD for Authenti
    cation
    Jun 17 14:15:58.798: AAA SRV(00000072): Return Authentication status=GET_PASSWOR
    D
    fixeddemo#
    Jun 17 14:16:02.502: AAA SRV(00000072): process authen req
    Jun 17 14:16:02.502: AAA SRV(00000072): Authen method=SERVER_GROUP tacacs+
    Jun 17 14:16:02.502: TPLUS: Queuing AAA Authentication request 114 for processin
    g
    Jun 17 14:16:02.502: TPLUS: processing authentication continue request id 114
    Jun 17 14:16:02.502: TPLUS: Authentication continue packet generated for 114
    Jun 17 14:16:02.502: TPLUS(00000072)/0/WRITE/47194394: Started 5 sec timeout
    Jun 17 14:16:02.502: T+: Version 192 (0xC0), type 1, seq 5, encryption 1
    Jun 17 14:16:02.502: T+: session_id 3123693045 (0xBA2FC5F5), dlen 14 (0xE)
    Jun 17 14:16:02.502: T+: AUTHEN/CONT msg_len:9 (0x9), data_len:0 (0x0) flags:0x0
    Jun 17 14:16:02.502: T+: User msg:
    Jun 17 14:16:02.502: T+: User data:
    Jun 17 14:16:02.502: T+: End Packet
    Jun 17 14:16:02.506: TPLUS(00000072)/0/WRITE: wrote entire 26 bytes request
    Jun 17 14:16:02.550: TPLUS(00000072)/0/READ: socket event 1
    Jun 17 14:16:02.550: TPLUS(00000072)/0/READ: read entire 12 header bytes (expect
    6 bytes data)
    Jun 17 14:16:02.550: TPLUS(00000072)/0/READ: socket event 1
    Jun 17 14:16:02.550: TPLUS(00000072)/0/READ: read entire 18 bytes response
    Jun 17 14:16:02.550: T+: Version 192 (0xC0), type 1, seq 6, encryption 1
    Jun 17 14:16:02.554: T+: session_id 3123693045 (0xBA2FC5F5), dlen 6 (0x6)
    fixeddemo#
    Jun 17 14:16:02.554: T+: AUTHEN/REPLY status:2 flags:0x0 msg_len:0, data_len:0
    Jun 17 14:16:02.554: T+: msg:
    Jun 17 14:16:02.554: T+: data:
    Jun 17 14:16:02.554: T+: End Packet
    Jun 17 14:16:02.554: TPLUS(00000072)/0/47194394: Processing the reply packet
    Jun 17 14:16:02.554: TPLUS: Received authen response status FAIL (3)
    Jun 17 14:16:02.554: AAA SRV(00000072): protocol reply FAIL for Authentication
    Jun 17 14:16:02.554: AAA SRV(00000072): Return Authentication status=FAIL
    fixeddemo#
    [ The output below is for the next Username: prompt I believe]Jun 17 14:16:04.554: AAA/AUTHEN/LOGIN (00000072): Pick method list 'default'
    Jun 17 14:16:04.554: AAA SRV(00000072): process authen req
    Jun 17 14:16:04.554: AAA SRV(00000072): Authen method=SERVER_GROUP tacacs+
    Jun 17 14:16:04.554: TPLUS: Queuing AAA Authentication request 114 for processin
    g
    Jun 17 14:16:04.554: TPLUS: processing authentication start request id 114
    Jun 17 14:16:04.554: TPLUS: Authentication start packet created for 114()
    Jun 17 14:16:04.554: TPLUS: Using server 10.1.7.15
    Jun 17 14:16:04.554: TPLUS(00000072)/0/NB_WAIT/47194394: Started 5 sec timeout
    Jun 17 14:16:04.558: TPLUS(00000072)/0/NB_WAIT: socket event 2
    Jun 17 14:16:04.558: T+: Version 192 (0xC0), type 1, seq 1, encryption 1
    Jun 17 14:16:04.558: T+: session_id 2365877689 (0x8D046DB9), dlen 24 (0x18)
    Jun 17 14:16:04.558: T+: type:AUTHEN/START, priv_lvl:1 action:LOGIN ascii
    Jun 17 14:16:04.558: T+: svc:LOGIN user_len:0 port_len:6 (0x6) raddr_len:10 (0xA
    ) data_len:0
    Jun 17 14:16:04.558: T+: user:
    Jun 17 14:16:04.558: T+: port:  tty515
    Jun 17 14:16:04.558: T+: rem_addr:  10.1.1.216
    Jun 17 14:16:04.558: T+: data:
    Jun 17 14:16:04.558: T+: End Packet
    Jun 17 14:16:04.558: TPLUS(00000072)/0/NB_WAIT: wrote entire 36 bytes request
    Jun 17 14:16:04.558: TPLUS(00000072)/0/READ: socket event 1
    Jun 17 14:16:04.558: TPLUS(00000072)/0/READ: Would block while reading
    Jun 17 14:16:04.562: TPLUS(00000072)/0/READ: socket event 1
    Jun 17 14:16:04.562: TPLUS(00000072)/0/READ: read entire 12 header bytes (expect
    43 bytes data)
    Jun 17 14:16:04.562: TPLUS(00000072)/0/READ: socket event 1
    Jun 17 14:16:04.562: TPLUS(00000072)/0/READ: read entire 55 bytes response
    Jun 17 14:16:04.562: T+: Version 192 (0xC0), type 1, seq 2, encryption 1
    Jun 17 14:16:04.562: T+: session_id 2365877689 (0x8D046DB9), dlen 43 (0x2B)
    Jun 17 14:16:04.562: T+: AUTHEN/REPLY status:4 flags:0x0 msg_len:37, data_len:0
    Jun 17 14:16:04.562: T+: msg:   0x0A User Access Verification 0x0A  0x0A Usernam
    e:
    fixeddemo#
    Jun 17 14:16:04.562: T+: data:
    Jun 17 14:16:04.562: T+: End Packet
    Jun 17 14:16:04.562: TPLUS(00000072)/0/47194394: Processing the reply packet
    Jun 17 14:16:04.562: TPLUS: Received authen response status GET_USER (7)
    Jun 17 14:16:04.562: AAA SRV(00000072): protocol reply GET_USER for Authenticati
    on
    Jun 17 14:16:04.562: AAA SRV(00000072): Return Authentication status=GET_USER
    fixeddemo#

  • XMLDataSet works, but not when loaded with UpdateContent

    I have page that contains a spry collaspile panel area and a
    xmldataset.
    The page when accessed directly from a url Loads fine
    http://www.gillespiecrm.com/display/default/clientdetail.template.php?uid=1&client=427
    However, if I take the above try to load it within another
    page of an application with updateContent
    Spry.Utils.updateContent('client' + sTabDivId + 'detail',
    'display/default/clientdetail.template.php?uid=1&client=427');
    The collasible tabs work, but the xmldataset does not.
    can anyone explain why this is occuring?
    Thanks
    Z

    Hi Zeus,
    I have already answered this query in a different post. May
    be you should go through it
    http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=72&catid=602&threadid =1295717&enterthread=y
    You need to replace Spry.Utils.setInnerHTML() method as
    explained there.
    -JV

  • My web page centers in the design view, but not when viewed on line.

    I am new to web design and of course, to this forum.  I had some background in VBA and Fortran, so when the original designer left, I was the only one in the organization willing to tackle the website and try to teach myself how to make it work and keep it current.  We were financially in the red at the time, so hiring outside help would have been almost impossible.  We are finally breaking even now, which was our goal as a non-profit.
    So I inherited the computer and the responsibility for maintaining the website at a non-profit organization for kids in Florida a couple of years ago, and I am doing pretty well with it so far, even though my depth of knowledge is very shallow.  AsI said before, I am entirely self taught, mostly by the trial and error method, so please excuse what is probably a very basic question. 
    My website is FloridaBandTournament.com.
    The site is working pretty well for my users, but from an appearance standpoint, the pages always are on the left side of the screen.  I would like to center the page(s) in the screen so that it looks a little better.  They are on a black background - not sure how the background got there, but it is working fine for me.  When I tried to center the pages, I googled my way to the statement text-align: center, and after placing it a couple of different places in the code, it suddenly seemed to work, at least in the in Dreamweaver 8 (I also inherited the software, which is I know is old, but so am I - will be 70 soon, and do my work for free for the organization).  But when I went to a couple of different browsers, it still displayed the website on the left.  I tried Firefox and IE.  I am at a loss as to what to do.
    When I found this forum, I thought maybe somebody could help me know what to do to make this centering of the page happen in a simple way for this old geezer.  I would sure appreciate it.
    I do not know what I should be communicating to you, but I thought if I sent the code in the body, it might help.
    The body code is as follows;
    body  [
        background-image: url(file:///C|/Documents and Settings/user/Application Data/Macromedia/Dreamweaver 8/configuration/ServerConnections/www/images/background.gif):
       background-color:  #000000;
       margin-top:  0px;
       margin-left: 0px
       margin-bottom: 0px
       margin-right: 0px
      text-align:center
    None of the pages in the active website have this code yet - I have a trial page that I am testing.  The trial page can be accessed from the link at the bottom of the 'links' page for 'Show Host Infoormation' (the mis-spelling is temporary and intentianal so I can find the darn test link myself when I want to).
    I would be glad to provide any information that might help someone understand what I have and what I am trying to do, but again, I am self-taught so I have little understanding of the technical terms.  I would sure appreciate any help.  Thanks in advance.
    Bob

    First obviously make a back-up of the pages/s.
    Go into code view in Dreamweaver and find the below html. Its near the top of the page after the css. You don't need to first table <table> </table> so you can delete that. It's the second table that we are interest in. See below I have added id="pageWrapper" to the opening <table tag.
    <table width="795" border="0" cellpadding="0" cellspacing="0">
      <!--DWLayoutTable-->
      <tr>
        <td width="795" height="19" valign="top" bgcolor="#000000"><!--DWLayoutEmptyCell--> </td>
      </tr>
    </table>
    <table id="pageWrapper" width="795" border="0" cellpadding="0" cellspacing="0">
      <!--DWLayoutTable-->
    Then add this to your css styles in the head setcion of the page.
    #pageWrapper {
        margin: 0 auto;
    You'll have to do this for each page of the site you want centered, which could be a pain if you have many pages.
    Also your background image is linked to your local computer thats why you are not seeing it but have a black background instead:
    body {
        background-image: url(file:///C|/Documents and Settings/user/Application Data/Macromedia/Dreamweaver 8/Configuration/ServerConnections/www/images/background.gif);
        background-color: #000000;
        margin-left: 0px;
        margin-top: 0px;
        margin-right: 0px;
        margin-bottom: 0px;
    If you want the image to appear amend the link to as below:
    body {
        background-image: url(images/background.gif);
        background-color: #000000;
        margin-left: 0px;
        margin-top: 0px;
        margin-right: 0px;
        margin-bottom: 0px;

Maybe you are looking for

  • How do I get songs from one Mac to another?

    How do I get songs from one Mac to another?

  • When I drag a favicon to my desktop it becomes a Firefox shortcut icon instead!

    I know that you can create a simple shortcut to a web page by dragging the favicon icon for the page from the top bar to the desktop. My problem is that whenever I attempt to do so, I end up creating a shortcut that has the firefox symbol -- the uniq

  • OIA-Finalize Data Collection Failed

    Hi, We are facing an issue with OIM where we have OIA-OIM integration. The issue is that OIA imports were running fine until we suddenly rebooted the OIM server while the OIA import was in progress. After this we are unable to run any job to import t

  • Returns process for stock transfer

    Hi all, How to carry out sales returns process for stcok transfer, material is sent from head office plant to branch plant, now we need to do sales return from branch plant to head office plant, kindly let me know what are the customization & end use

  • AirPlus support on iOS 6.1

    Uppdated my iPhone 3S and my 4S to iOS 6.1 and the Airplus support to send video streamming to the Boxee Box dont work anymore. Is the support for Airplus gone with the new iOS or it is this a bug?