Sound on TV show too slow

I just bought a new tv show on itunes and wanted to watch it on my computer. I bought it in SD not HD to save money but now the sound is to slow for the images. Is there anything I can do?

Hey okifaniki,
Thanks for the question. I understand you are experiencing playback issues with a recently purchased TV show. The following resource may provide a solution:
Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/TS1718
Thanks,
Matt M.

Similar Messages

Please Help! All Sounds in Classic are too slow now!

Something dreadful happened (wish I knew what) and now every sound that is played back by any Classic application is about 70% too slow.
No matter if it is a Classic game like Unreal (I), Deus Ex, AvP for OS9 (the OSX version works fine), or Quicktime 6, or any other given Classic application. The only sounds that appear normal are the Platinum system sounds.
I don't know which files affect Classic sound playback or where they are located. Can't imagine what could cause that particular problem.
Hope someone could help...
Many thanks in advance
M:A:
PowerMac G5 2x2 GHz Mac OS X (10.4.6) 1.5 GB RAM, standard sound card (TI-TAS3004)
PowerMac G5 2x2

Sorry, didnt get an email notification, so I just checked the thread.
Starting and quitting Garage Band actually helped!
(Imagine listening to the meaningful dialogues in "Deus Ex" spoken with Sesame Street's Cookie Monster voice. Aaaaannnd reeealllly sllloowwww. Doesn't quite capture the mood...)
Do you have an explanation why Garage Band should affect Classic sound output?
Thanks a lot,
Martin

What can be done to correct slow video or freezing in Adobe Premiere Elements 12? Sound plays fine but the video is too slow to even start a project.

Sound plays fine but the video is too slow to even start a project.

film78
On what computer operating system is your Premiere Elements 12 running on? Have you updated 12 to 12.1 yet? If not, please do so by using an opened project's Help Menu/Update.
Not enough information in order to help you.
Looking for
1. Properties of source media (including file extension and brand/model/settings of camera that recorded the video).
2. Is problem restricted to one particular file in one particular project? What happens if you start a new project? What is the
duration and size of the project when performance is slow and freezing sets in? What are you doing in the program when this happens?
3. Using a pen and tablet device instead of a mouse?
4. Does problem exist if antivirus and firewall(s) are disabled?
5. Please describe computer environment, including dating on video card/graphics card driver version. Did you install the program to the
default Local Disk C? Where are the Scratch Disks directed and how much free space there?
Lots more questions, but let us start here and then decide what next based on your reply.
Thank you.
ATR

Showing in vls player "DEVICE IS TOO SLOW"

showing in vls player "DEVICE IS TOO SLOW"
What i should do for this problem

Contact the app developer for support.

Safari 5.1 too slow to print tab content?

Since Safari 5.1 I do have a problem with the JavaScript function window.print() in new tabs
For instance:
win = window.open();
win.blur();
self.focus();
win.document.open();
win.document.write('<html><head><meta charset="UTF-8"><title>test</title>');
win.document.write('</head><body id="print">some content here</body></html>')
win.document.close();
win.print();
win.close();
This code opens a new tab and the Safari print popup but without any content. Safari even generates multiple pages when the content requires more pages. But all pages are blank.
First I thought my print stylesheet isn't compatible with the new webkit engine or something like that.
But it turns out Safari is too slow with the .print() function and already closed the tab before the content could be rendered.
So I fixed it by setting a timeout
setTimeout(function() {win.close(); }, 1000);
Is there any chance that this problem could be fixed in general?
Thanks!

Hi everyone, first thanks for helping...
My SSD is 256GB and it still has 128GB of free space for now... So I don't think this is my issue.
Then I tried the the reset thing (good tip, I didn't know about that), but it's still the same. I didn't try the virus scanning, because I'm on a Mac and don't have one installed. I just let the OS dealing with it.
I think it's a graphic issue. Whenever I clic onto a folder, inside of Bridge, it's like nothing happens, execpt I can see that the name dispayed onto of the app window changes. So Bridge DID actually get me into that folder, but the graphic interface doesn't show it.
If I use Exposé or Space then the change does appears.
So everytime I move into another folder, I drag my mouse to one corner of my screen to activate Exposé, then come back and here I am in the new folder.
But this trick doesn't work for preview. My preview window allows me to play sound from video files, but wont display any image for it (like if it was sound only files). Still images (jpeg, psd...) wont show up as well.
So it is definitly a graphic problem. The softaware is not slow, like I though at first, it just don't reflect what's going on on the interface.
When I click "about this Mac" to get info on my graphic card it reads:
NVIDIA GeForce 9400M
NVIDIA GeForce 9600M GT
Why do I have 2 of them? No idea... But I see guys online that have the same in their Mac...
I'm not sure to understand if I can or cannot update graphic card drivers for Mac... Usualy the only upgrades I need are coming from Apple, and my Snow Leopard is fully up to date...

Java web start application runs too slow...

Hello,
I am new to Java Web Start. I have created a java web start application and when i enable web start from local Execution, then it works perfectly well. But when i upload it on server and then download the application, then it is too too slow...i mean it takes minutes to get the output on clicking some button....my jnlp file is as under:
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<jnlp codebase="http://(web server code base)" href="launch.jnlp" spec="1.0+">
<information>
<title>ERD</title>
<vendor>Deepika Gohil</vendor>
<homepage href="http://appframework.dev.java.net"/>
<description>A simple java desktop application based on Swing Application Framework</description>
<description kind="short">ER Deign Tools</description>
</information>
<update check="always"/>
<security>
<all-permissions/>
</security>
<resources>
<j2se version="1.5+"/>
<jar href="ERD_1_2.jar" main="true"/>
<jar href="lib/appframework-1.0.3.jar"/>
<jar href="lib/swing-worker-1.1.jar"/>
<jar href="lib/jaxb-impl.jar"/>
<jar href="lib/jaxb-xjc.jar"/>
<jar href="lib/jaxb1-impl.jar"/>
<jar href="lib/activation.jar"/>
<jar href="lib/jaxb-api.jar"/>
<jar href="lib/jsr173_api.jar"/>
<jar href="lib/ant-contrib-1.0b3.jar"/>
<jar href="lib/jaxb-impl.jar"/>
<jar href="lib/jaxb-xjc.jar"/>
<jar href="lib/FastInfoset.jar"/>
<jar href="lib/gmbal-api-only.jar"/>
<jar href="lib/http.jar"/>
<jar href="lib/jaxws-rt.jar"/>
<jar href="lib/jaxws-tools.jar"/>
<jar href="lib/management-api.jar"/>
<jar href="lib/mimepull.jar"/>
<jar href="lib/policy.jar"/>
<jar href="lib/saaj-impl.jar"/>
<jar href="lib/stax-ex.jar"/>
<jar href="lib/streambuffer.jar"/>
<jar href="lib/woodstox.jar"/>
<jar href="lib/jaxws-api.jar"/>
<jar href="lib/jsr181-api.jar"/>
<jar href="lib/jsr250-api.jar"/>
<jar href="lib/saaj-api.jar"/>
<jar href="lib/activation.jar"/>
<jar href="lib/jaxb-api.jar"/>
<jar href="lib/jsr173_api.jar"/>
</resources>
<application-desc main-class="erd.screen1">
</application-desc>
</jnlp>
I dont understand the reason. Could you please help me out.
Thank you,
Deepika Gohil.

Check your web server's access logs to see how many requests web start is sending for each jar. After you've loaded the application the first time, for each subsequent launch, if you've got everything configured right, you should only see requests for the JNLP file and maybe some gifs because web start should load everything else out of the cache (if you're using the version-based download protocol). Or if you're using the basic download protocol, then you might see requests for each jar file, but even in this case, if your web server is prepared to evaluate the last-updated attribute for each jar request and for jars that have not changed, respond with no actual payload and a header value of Not-Modified, then that should run almost as fast.
You might also want to consider changing the "check" attribute of the "update" element from "always" to "background" for a couple of reasons. It should allow your app to start sooner (but this means that you might have to launch once or twice after an update is applied to the web server before the update shows up on the workstation). Also, my impression is that "always" is broken and prevents web start from ever checking to see if your jnlp file has been updated if you launch your app from a web start shortcut - launching from a browser is less likely to have this problem, depending on how often your browser is configured to check for updated resources.

Animated Gif's Playing too slow

Lately since I installed leopard animated gif's are showing up on safari too slow and its not on one site its everywhere! And I need to see the real speed of what the gif is or else I won't know if its wrong or not. So what do I do?

Same problem here, very frustrating. The same thing also happens on my MacBook with Tiger. The longer the animated GIF is, the more it slows down. Here's a good example, fine in Firefox but not Safari: http://content.ytmnd.com/content/6/a/0/6a0e42120c9f9e24dfc3bfa353ccd114.gif
I submitted this as a Safari bug a while ago, I hope all of you will too.

Internet connection too slow, is there a way to speed up the itouch?

So I can connect to Facetime, but all I see is a picture of a person and then the Itouch freezes and shuts down. I think it is because my internet connection is too slow, because it only doesn't work in my apartment (it works at places with quicker connections).
The question is, is there currently a fix to this problem (I can't be the only one who has it)? It all works, just freezes after connecting and showing the picture of the person I'm talking to then disconnects. Is there a way to make this work?
I'm at college and the only reason I got the 4g from my parents is 'cause they wanted me to help my little bro with homework back home... but if Facetime doesn't work at college then I should sell mine and go with a cheaper, earlier generation. Thanks!
Message was edited by: ClassyCoug

By what type of security I mean, WEP (not preferred), WPA, WPAs. I would go to the support page for you router on the manufacturer's sit to see if an update to the firmware is available. You also have to enter the setup for the router to determine the installed version of the firmware. Not infrequently a firmware update fixes problems since that is one purpose of the updates.

Golive CS2 too slow on my Mac g5 to get any work done?

For the past 2 years I have been slowly building a rather large web site (about 2000 hours invested). We will be selling items we import from india (my girlfriend and I spend 3 moths a year in India) and then there is an entire section on India travel tips, photos and travel logs.
I am pleased with Golive 6.01 and recently converted my site to CS2, just to find it is very slow on my macintosh G5 and many weird bugs And site looks the same as in 6.01 when previewed in various browsers. Also in CS2 when I click on preview button, the page I want to work on closes and the page that brought me to that page pops up.
I bought a G5 macintosh which should run CS2 more quickly but:
I have yet to see my site in Explorer 7 for Windows because Microsoft did not make Explorer for Mac after version 5.0.
My question is:
Why not complete site in 6.01 and then before it is published convert to CS2. I can't get anything done with CS2 it is just way too slow.
Thanks Stuart
(Could installing 2 versions of Golive on one drive be generating the bugs?)

Hi all:
Been cleaning up Site (weird files not in my site but on desktop keep showing up as errors) got ride of them. Turned of my internet connection). Things seem to be getting better.......for now. Working on G4....will move to my G5 and see.
Might pull this one out.
Why several target files with only one source show as an error is an irratation because help says it's not really an error and can be ignored.
OH...one quick question do SOURCE files get uploaded to host when one publishes? Or perhaps a better question! Do SOURCE files need to be uploaded to host. I suspect not...but I also suspect It's OK..might just slow things down a bit?
Thanks to all of you.....this miserable world needs more like you all!
Mac
Stuart Sims aka Master Quark

"Disk Too Slow..." problem solved...for me

Lately my Macbook and Logic have been driving me nuts with the "Disk Too Slow" error message. But I notice it was happening on one particular song. I'll cut right to the chase....delete unused tracks. After doing this the song played thru without a peep. And has been doing so ever sense. The cpu meter shows little or no activity. I am happy and all is right in the universe. Just thought I'd pass it along. Your milage may vary.

Yep.....it all makes sense now. The song was created on my i5 iMac. Empty tracks not a problem there. I got wise when freezing the tracks didn't help. So I temporary deleted all my audio regions except those on ONE track. Still got the error message. So I froze that track and STILL got the message. ***? So I reloaded the song and deleted all unused tracks and, well, the rest is history. For what it's worth, 4 of those tracks were audio instrument and 8 were rewire tracks. I suspect the rewire tracks were the actual hogs, but I don't care at this point. Just happy to get some work done on the laptop. Your tip makes perfect sense as well.

Disk too slow / System overload HELP?

I'm really hoping someone can help me out with this!:
I purchased a G4 PowerBook around six months ago, with Logic Pro pre-installed. Since then, I have mixed and mastered lots of music that was recorded on a previous system and imported. I was running multiple tracks simultaneously with tons of plug-ins and everything ran smoothly on my new Mac. HOWEVER, within the last month, my playback capabilities have been severely reduced. When I try to play back even two tracks simultaneously (with just one compressor or reverb), I get the error message, "Disk too slow / System overload."
My first reaction to this problem was to check my disk space and see how much room I had left: it turns out I have over one third of my harddrive space still available. I checked my memory capabilities and they seem to be more than adequate. I bought new virus protection, too, and ran scans to see if that might make a difference, but it hasn't. I don't understand why this is happening on a system so new. ANY ADVICE YOU CAN OFFER WOULD BE GREATLY APPRECIATED!
Many thanks.
Powerbook G4 Mac OS X (10.4.6)

It is generally not a good idea to run logic on the same drive that contains your audio files and samples. Most of the data involved with logic whether it be programs or individual audio files will be saved physically all over the place on your hard drive. At a certain point the actual part of the drive that reads the data will not be able to move around to all the little different audio files it needs to access for the session on top of running the program and whatever other software that is up. It is best to save all your audio files and samples to a fast external drive (7200rpm at least) otherworldcomputing.com has great drives that have high quality cases and the option to put any drive they have in stock into the case. (i would recommend seagate) If you are going to continue running your entire sessions off the internal drive then you need to keep up with your basic mac housekeeping. You should repair your permissions 2 times a month (use disk utility) You should buy a good directory repair program such as disk warrior. The directory is exactly what it sounds like. It keeps track of where everything is on the computer. If your directory is corrupt the computer will have to do an extra manual search to find what its looking for. If your directory is healthy your computer will make a straight shot to the file you are looking for.

How do I fix the problem 'disk is too slow' and what does it mean anyway?

I'm transferring casete tapes to the Mac via the input line. I've transferrred nearly 100 with no prouble, but sudddenly today two things have gone wrong (see separate question for the other one). This one is that suddenly the error message 'Disk is too slow' comes up. also the track (the top one, not the bottom edit section one) is bright red instead ofthe usual dark purple.
What's gone wrong and how do I fixit?

Sorry about the lack of terms: lazy of me I admit. Having read up Garageband Help, I think I've got the answers. Yes, by the top part I mean the track in the timeline. The bottom part is the same track showing up in what is headed the 'Audio Region' The bright red is the colour the track is in the timeline during recording, and it stays like that until after stopping recording I click somewhere in the timeline section (not necessarily on the track itself) at which time it just goes the normal kind of dull greyish colour an unselected region does.
Thanks for telling me how to see the HD info. Its 250GB, of which I've used about 23GB. The first computer I worked on as a programmer back in 1962 had a 400KB drum (the first disks didn't arrive until 1963) as its random access backing store - and yes, that is a K. The machine also came with 12KB of RAM and 4 tape decks, was the size of a hotel kitchen, and cost about $200,000. You young people don't know how lucky you are

Repeated Error: Disk is too slow. (Record) (-10005)

Hello brilliant forum users,
I'm using a brand new mac mini with all of the software updated. It's got 2GB of RAM.
I am recording spoken word through a mixer, onto one track (male basic).
There are no other tracks.
I have no other applications open, and the computer has had a fresh boot.
I am getting this error repeatedly, intermittently, with no apparent cause:
Disk is too slow. (Record)
(-10005)
After googling and reading up, I have done the following:
Made sure FileVault is off (it was).
Turned off time machine (I had it on).
In the energy saver preference, deselected 'put hard disk(s) to sleep when possible'.
Still, the error occurred.
Then, I decided to record to my 500GB external (backup) drive, which is connected via usb (I do not have a firewire external drive). I thought, surely this will fix the problem. I made sure time machine was disabled.
Still, the error occurred.
It is totally random, happens at 2 minutes, 20 minutes, or not at all.
I have recording audio resolution set at 'good'.
I am recording via an audio-in (3.5mm I think?) aux cable from an OUT on the mixer.
It seems that I should call apple, but I am at a meditation center in Thailand, and the time difference makes it difficult, not to mention that the computer is in the meditation hall, which makes phone calls difficult.
So, I turn to the trusted experience of YOU!
Thank you very much!
Most appreciatively,
Lizzy

I have also been getting this one intermittently while playing back - sometimes while playing back only one track. Don't know if it's related.
Part of the project was not played
This project has too many real instrument tracks to be played in real-time.
To optimize performance, see the 'Optimizing GarageBand performance' page in GB Help.
hmmm.. that doesn't sound right - and may suggest a software issue.
Have you tried creating a new user account (go to System Preferences, Accounts, and add another account with the "+" sign) and using Garageband from a new account?
Or if that's not working, do a complete uninstall of Garageband...
• trash GB receipts (at the hard drive level)
• trash your Caches folder (at the user level)
• trash all GB preferences (at the user level)
• trash the GB application
... then reinstall Garageband from scratch?
Hope this is helpful!

Disk is too slow. (Prepare) (-10001) HELP

ive searched through endless threads with this.
I have just installed a symphony 64 pci card, im not using it with the symphony yet, still using the fireface ufx
this could be just a coincidence
but logic 9 is now constantly F&^%ing up
Disk is too slow. (Prepare)
(-10001)
when im playing, or recording the cpu goes into overload for no apparant reason and then no sound comes out.
I have to mess with buffer settings etc.. to get it to work.
I finally got everything working, and now Im back to trhe same problem of Logic been completely unworkable.
I tried changing the esata cable for my g-tech harddrive, have tried it without the UFX and it still F*&ks up
Im on an 8 core machine, 16gb ram, 6tb external drive, ssd drive etc..
Logic is really pi££ing me off now.
if anyone can help I would be very greatful.
when im playing, or recording the cpu goes into overload for no apparant reason and then no sound comes out.
I have to mess with buffer settings etc.. to get it to work.
I finally got everything working, and now Im back to trhe same problem of Logic been completely unworkable.
I tried changing the esata cable for my g-tech harddrive, have tried it without the UFX and it still F*&ks up

There's a guy on another thread here who just solved this exact same problem by using Disk Utility to Repair Disk Permissions. Admittedly, it sounds too good to be true in this case, but worth a try.

Is Version Cue CS4 TOO SLOW TO USE??????

Is it just me or is the new CS4 versioncue workflow extremely slow?
After installing Version Cue CS4 on the same server that was running CS3 and trying to open an existing InDesign project (book with dozens of linked images), I realized that using VersionCue CS4 is so painfully slow compared to CS3 that it's unusable.
It seems that VC CS4 does not create local copies on the hard drive and instead, all traffic is sent over the relatively slow Ethernet connections. While this does help with synchronizing confusions, it makes working on the projects way too slow.
VC CS4 is running with 768MB on my server, so I don't think that is the problem.
Will someone respond to this post and let me know if (a) I'm probably doing something wrong and everything will be OK, or (b) if I can install CS4 and still use VC CS3 on the server?
thanks in advance!

Thanks for the response.. It seems a bit hit or miss on opening up my projects.
For example, if I click on a PDF file in Bridge, it takes upwards of a minute to launch Acrobat 9 and display the first page. If I open Acrobat 9 first, and then click on the PDF, it opens almost instantly.
Also, we have a job with a Microsoft PPT slideshow. When editing the slide show and saving back to the Version Cue 4 server (pressing save in the PowerPoint program), it takes upwards of a minute.
This is with 768MB allocated to the stand-alone server, and 1GB assigned to the Adobe Drive CS4 cache on the client computer.
Does anyone know how to get VC CS4 or Adobe Drive to operate faster?

Sound on TV show too slow

Similar Messages

Maybe you are looking for