Sound only when Importing QT

Hi there,
I have tried to import a QT clip that was done with FCP7, it opens and plays fine on my desktop but when I import it either via import or by dropping into FCPX, I end up with just the sound, Can anyone assist me please.
Regards,
John

What codec is it? There is an issue with oder QT files from legacy which were created in the QT framework, as opposed to FCP X which now creates/uses them with the AV Framwork.
Use QT Player or Compressor to transcode to ProRes 422.

Similar Messages

Static only when importing

Apologies if this has been answered already, I searched the help menus and forum to no avail even though similar but not exactly the same problems are cited.
Anyway...
I have uploaded over 3000 tracks from CD without a glitch. Importing one disc today (new and legitimately pruchased)it hung for an age, locking up the p.c. When it finally imported it was scratchy and distorted in sound, almost as though my speaker cable were loose and touching something metal (which I have checked). I cleared the albumn from my playlist and tried another.
At first this too seemed to have the same problem only I have now narrowed the problem down to the fact that all tracks played, either from the importing disc, the library or indeed the music store samples are distorted if I play them while importing.
Once the import ends all is right again. Reboots, virus / spyware scans, firewall settings and other usual external fixes have been tried.
Bare in mind that this now happens 100% of the time, 100% of discs, only during import and only since the troublesome import.
Any suggestions?...and not listening while uploading is not a contender, I still have to sit here and upload another 3,000 tracks and aint gonna whistle while I do it.
Thanks in advance!
Windows XP Pro AMD Athlon 4.2htz dual processor.

Hi,
In the past I have had a similar issue with one board (mic was giving a backgroung humm ie static noise).
The cause was revealed quite few months later as the board finally died... as the board had been originally installed around 1,5 years ago - there was some extra metal board connector under the motherboard in the computer case which wasn't "screwed in" - it was just supporting the board, not grounded and therefore causing a short circuit. That caused the humming and finally also killed the board.
So, be sure that all the screws are properly tightened and there's nothing touching the board or it's components which could short circuit.
- Tom

IPad3 stopped some sounds only when muted

For some reason, my new iPad stopped working for sounds only on some video playback, others work. alarm app doesn't work. This is with sounds muted, which is how I have always used. This is a recent change. Some video will start with a blurb of sound, then go quiet

Try Googling about your problem, if no solution comes up go to the Genius bar if you're residing in the US. If you aren't in the US go to the nearest Apple Store.

Problems capturing the sound layer when importing m2ts files

Hi all, I'm new to the whole video editing side of things and so would appreciate some help.
I've just acquired a Canon HF200 HD camcorder, and a Sony Vaio notebook which came with Premiere Elements 7.0 pre-installed.
For the last month I've been shooting footage, and just getting down to trying to edit everything and put a DVD together.
The problem I have at the moment (and I've just started using the program, so everything is new to me) is that while I seem to be able to import the m2ts file format in which my camera records, only the video is imported into Premiere - not the audio (it reads the file ok, and no errors appear, but when I go to review the footage there is video but no sound).
I can play all my videos in Windows Media Player just fine, with both video and audio. So it seems my machine is able to read the files correctly in this program. However, the audio seems to drop out when I import the file into Premiere. The program was pre-installed in my machine, and when I go in to have a look at the audio settings, there doesn't seem to be an ability to change the settings to something different.
So far I've spent a long time googling and trying to find a solution, but with no joy just yet.
Appreciate any assistance the anyone can offer. Is there just a simple setting that I need to change? Or do I need to somehow convert the files into another format before Elements 7.0 can read them?
Thanks.
Jeff

the machine I have seems to comply with the specs required by PE7 (and given that it came with PE7 pre-installed that should be the case).
There are two things to consider:
1.) editing most footage, especially SD material
2.) editing AVCHD, currently the most demanding of all common video formats to edit. This is what you have.
Now, when you launch PrE, you get a splash screen. There you can Open New (create a new Project), Open an existing Project that has been opened recently, or Open a Project by navigating to it. One can also Exit.
In your case, you will go to New and when that dialog box opens, choose the Preset for AVCHD w/ DD 5.1 SS Audio.
Also note, that when in the Edit Mode, there are two View Modes (accessed via two icons to the left of the lower Panel), Timeline View Mode and Sceneline View Mode. For DD 5.1 SS Audio Clips, you will find Timeline View Mode to be the best. Now, you can switch back and forth, but Timeline View Mode will give you infinite control. It is the view that most editing programs use, and that most editors use.
Good luck,
Hunt
PS - I strongly recommend Steve Grisetti's book, The Muvipix.com Guide to Adobe Premiere Elements 7.

Headphone sound only when changing level or balance

Hi,
I have a weird problem with my Logitech B530 USB headset.
I have configured it as the main input and output device in system settings, but I only hear sounds when changing sound level or balance. So if I e.g. start some music in iTunes I hear nothing, if I then increase/decrease the volume I hear the song, but the sound quickly fades away and there is no sound again. The same thing happens if I change the device balance.
Has anyone experienced anything similar and/or have any idea how to fix this?
Thanks,
Mads

= Yes it came pre-installed,? it's an x-fi xtreme music, is there any other way to find the exact model? Im pretty sure my card is upside down so It would? be impossible to read the serial number which is on the bottom. It doesn't seem to be a hardware issue at all, it seems to be a software [email protected]

Audigy 2 ZS - Stereo Sound Only When Testing Speaker Setti

I am running Windows XP SP2 and have a Logitech Z-5500 hooked up through a co-ax connection. I had?no sound problems until I?ran Creative Auto Update and updated the recommended software (Creative Media Source Player 5.0.38 and driver version 5.2.4.96) yesterday. While I am still able to hear?5. channel DVD's through all my speakers, when I run the Creative Speaker settings software, I only hear sound from my front left and right speakers.
I only get sound through the centre channel when watching TV, which?echoes. ?I tried running system restore to get back to my previous drivers, but the system was unable to restore itself. Any help would be appreciated.

Forgot to add, all of my speakers are in working order, I have individually tested them. I have set my 7.1 system up before in my old apartment, it's just not working this time. Thanks again.

Sound only when "Solo'ed)

Hey. I'm finding GB very frustrating. I've been doing this for years w/Cakewalk but...anyway...I have many questions but the immediate frustration is: NO sound in my project unless I "SOLO" every track. I got very nervous & tried another song (project) and that one worked!! Any solutions? The next question will be "Can't you "mixdown" 2 or more tracks to 1? You must be able to....and that goes along with "Can't you layer recordings on a single track? instead of replacing what's already there? I'll settle for an answer to my 1st question. Thanks so much guys.....

that is the only way I've seen this issue manifest itself. i would try creating several real and software tracks, and toggling the solo buttons, just for kicks.
also, though it does not fit what you have described, try toggling the Ducking menuItem

Notification sounds only when I get email from address book contacts

I am getting constant sound notifications whenever I get email but very few emails really require instant attention. I do not want to hear a sound when I get an email, except when the sender is one of my contacts. What settings do I need to make this happen? Thanks.

OK, perhaps I see the problem now.
Outgoing Mail Server: smtp.gmail.com
http://email.about.com/od/macosxmailtips/qt/et_gmailosxmail.htm
http://islandinthenet.com/2009/05/08/how-to-setup-leopard-mailapp-to-use-gmail-2 /

PC crashes only when importing one track of an album!

I have loaded almost 25,000 tracks on my iTunes. I have added 4 more albums today but the last track on one disk freezes iTunes just before completing the download, then the PC restarts of its own accord. I have tried importing just this track and it does the same. All other albums and tracks do not do this. It is track 20 of disk 1 on Radio 1 Established 1967. Anyone else had a similar problem? Or know a cure for this?

See reponse posted by Syncopator!!
Syncopator
Re: iTunes Match Not Working For Some Protected AAC Files
Sep 15, 2012 11:40 PM (in response to nialls)
I posted a solution on November 23, 2011, but it has yet to be acknowledged as "helpful" or a "solution" by the person who started the thread. But it works:
1. Burn the problem songs to a CD.
2. Drag the originals to another folder (for safe keeping) and delete from iTunes.
3. Re-import the songs from the newly burned CD.
4. The song and artist titles should populate automatically. But if they don't, enter them accurately.
5. Then select, from the iTunes menu, Store > Update iTunes Match.
Done.

Sound only Video won't play

When I import my video It will not play. Sound only.

You import from a camera? Which one?

Sound only comes out from earphones

Sound only when using earphones - can you tell me what the problem could be.

When you remove the earphones and try to raise or lower the volume with the buttons, what is appearing on the screen? Do you see the speaker picture and the volume raise and lower? Just above the speaker, what does it say? If it doesn't say ringer, then there is something obstructing the headphone jack. Try inserting and removing the headphones a couple of times. If that doesn't help, then use a toothpick and see if you can remove any lint in the headphone jack. Generally a small piece of link will cover the sensor that tells the phone the headphones are plugged in.

No sound when importing from a Sony HDR-HC7

Hello all together,
I bought a new Sony HDR-HC7, the camera is fantastic. There is only one thing perplexing me: When importing HD-Clips into iMovie HD 6.0.3 I cannot hear the sound that was recorded by the camera. When I play the clips, I can hear sound. What could this be?
With my old Sony TVR 33 (no HDV) I don't have this problem.
Did I forget any settings?
Thanks for advices,
Stefan

Hi Stfan:
I guess I would try the easy things first.
Make certain that " Video Play Through Camera " is
not enabled in imovie Preferences. That is
because it sends all audio through the FireWire port
and mutes it on the computer.
ake certain your video is 16-bit audio (not 12-bit).
Once you have imported (and saved) the video into
imovie, close imovie. Then unplug all firewire
devices (camera included).
Relaunch imovie. Is the audio there now?
Sue
Hi Sue,
thank you for your advice. As I use the German version I am not quite sure, if "Video Play Through Camera" is in the third tab of the iMovie-Prefs the fourth checkbox overarm? This one's unenabled. Audio is 16-bit.
Audio was alwas there in the play-mode but not in the import-mode.
Stefan
MacPro 2,66 - 2 GB RAM/PB G4 1,5 15" Mac OS X (10.4.8)

Imported avi crashes premiere pro cs4...sound only on windows movie maker

Hello all,
So when I go to import an avi it just crashes premiere pro...but first it turns into a sound only file, then crashes. With windows movie maker it only plays the sound?
Anyone else have these problems? I don't really want to use other video editors...
Oh and I'm running Vista.
Suggestions please.

I'm sorry I don't have a quick answer.
From what I can tell
- Vista X64 uses MovieMaker 64bit
- MovieMaker 64bit requires 64bit codecs (I think there is an experimental 64 bit ffdshow on sourceforge that might work)
- However installing 64bit codecs may stop your 32bit video apps from rendering properly.
I didn't provide links to the experimental ffdshow build cause I didn't try it myself.
If I were you, I'd give up on getting Movie Maker working for now, and just focus on Premiere pro. ? Since it is a paid application they should provide good support. You can't be alone with this issue. If they require codec information just tell them it's a H.264 video with PCM Audio in a AVI wrapper. Guess a quick snapshot video could be provided if they needed one.
ps.
. I'm just a user, not affiliated with Creative)
(pss... I use Vista x64 as well, and do not get video in moviemaker either)

Why does my sound only come on sometimes when i get to the log in screen for World of Warcraft?

Product: HP Pavilion dv9628nr
Operating system: Vista
Error Message: (i dont know if it is an error message) "No Audio Output Device Installed"
All I did was play the latest content for World of Warcraft (Patch 4.3). I hit the mute button and it turned red. I hit "exit" and "exit now" after i was done playing and it took a long time to exit. After it was back to the very familiar screen with all the icons the sound was gone. The mute button was blue after a restart, then it started saying i didn't have a sound card when i tried looking for it. The next day i turn on my laptop and and the mute button is red when it's starting up. After it was done I unmute it and sound worked fine, but for a while. After that the sound only comes back on a few rare occasions when i get to the login screen of world of warcraft. Then after a while of walking around doing nothing, the sound is gone again, but the mixer is still there (the mixer disappears after i restart). It also doesn't let me successfully uninstall the sound driver. I restart and go to reinstall the driver on the website, but during the download it says that it's already installed and if i want to overwrite, when i hit "yes to all" the lap top beeps LOUDLY, and says the installation failed because it didn't find the device. What's going on?

The boot ROM is static unless Apple issues a firmware update. I just checked and they never released any such updates for the eMac. Without a firmware update available, I know of no way to overwrite the current version.
What did the serial number check show? Don;t post your serial number, just whether it fell within one of those ranges.
The logic board issue was specifically bad capacitors. Look at some of the pic posted here:
http://picasaweb.google.com/gdegagne/EMacCapacitorReplacement#
Open your RAM door on the case bottom and look inside. The third picture in the web site is the view with that door open. You can see only two of several possible bad caps through the RAM door but, if those two are leaking brown goo like those in the image, I think you will have found your problem.
I just realized you are in Tacoma. That makes the closing of the repair place I mentioned all the more sad, as your shipping costs to Eugene OR would be much less than for an eMac owner living several states away. Heck, you could have driven it to Eugene!
Really, I'm not in the habit of preaching 'gloom and doom' but, in your case, we need to deal with the logic board issue first to be able to provide you with worthwhile help should your computer not have the "bad cap" problem. If bad caps are the problem, there is not much we can offer other than to refer you to Google to search for self-repair instructions, or to Apple Customer Relations (1-800-767-2775) to consult regarding a Repair Extension Program that was apparently shut off too early.

When importing an MXF file from a CF card, I can only get :30 of the original clip. What am I doing wrong?

When importing MXF video file from a CF card to Final Cut 6, I can only import :30 of it. Why am I limited to :30 and how do I get the entire clip?

That's the WRONG WAY! You have to use Log and Transfer, like Michael says. Here's A tutorial on how to deal with Tapeless in FCP
<a href=http://library.creativecow.net/ross_shane/tapeless-workflow_fcp-7/1 target=_blank>Tapeless Workflow for FCP 7 Tutorial</a>
BUT NOTE! If this is MXF from a CANON camera...their new 305 camera...you not only need a plugin to get it to work (they either include it with the camera, or you have to go to the website... the Canon Log and Transfer plugin), it also might only work with FCP 7. Because the camera is brand spankin new. Try the plugin first...well, if this is from that Canon camera.

Sound only when Importing QT

Similar Messages

Maybe you are looking for