Sound Out from Mini Display Port Not Working on a Particular TV

I have a Macbook Pro that I purchased new a few months ago. I use an adaptor to run the display out of the Mini Display port to an HDMI cable on my TV, sound and all. I have also used it while traveling to do the same thing on hotel TVs with HDMI ports.
When I do this, I have to go into System Prefs>Sound and specify the sound output should go to the model of TV that is displayed in the prefs. It always seemed to detect the model of TV when I have it hooked up.
I am staying in a house where I can't get the sound to go out of a Toshiba TV. It shows up in the sound prefs, but I can't ear a thing. The only way I can hear sound is if I tell it to use the internal speakers.
What am I doing wrong when it comes to the Toshiba?
Thanks.

Greetings,
But I wanna know what is the best way going ahead to get this fixed.
Thats up to you. Given the testing you have performed the only additional items I would suggest would be:
Reset the SMC and then test: http://support.apple.com/kb/HT3964
Reset the PRAM and then test: http://docs.info.apple.com/article.html?path=Mac/10.6/en/26871.html
You can make an appointment with a Mac Genius at an Apple store, contact AppleCare via phone, or contact an Apple Authorized Service Provider for assistance.
Calling AppleCare and having them send you a box for the computer would be the fastest method of repair (usually) as an AppleStore or an Apple Authorized Service provider may not have the parts in stock. You could certainly take the computer in to have them look at it and tell you what the repair time frame would be.
Also, if they decide to replace the part, will I be shelling out any money inspite of the coverage ?
If you would like to read the warranty of the Macbook Pro, Hardware warranty details are found here: http://www.apple.com/legal/warranty/
The warranty covers manufacturing issues. As long as the failure is due to a hardware component failure and not outside influence then there is no out of pocket expense.
If the port has failed because a 1 year old shoved a nail in it, rain blew in the window and shorted out the logic board, SUV backed up over the computer and broke the port, then the warranty will not cover it. They will contact you and let you know that the repair is not covered and ask if you want it repaired at your own cost or you can pick up / have the computer sent back to you.
If for some reason you find out the issue is not covered then you could take it up with your insurnace company (renters / home owners etc) or your credit card company if you purchased the computer with a credit card. Some credit cards offer hardware coverage for purchases.
Best of luck.

Similar Messages

Apple Mini Display Port NOT working at resolutions over 1600X1200!

Problem:
Apple Mini Display Port does NOT work at resolutions over 1600X1200 on NON Apple Cinema Displays.
That means if you own any other brand of monitor such as NEC, Lacie, etc. you will NOT get native resolution on your 24 inch monitor as it is stuck at a maximum resolution of 1600X1200.
This story was mentioned on "Macbreak Weekly" show 4-14-2009. I have since checked with a few people and it would indeed seem to be true at this point.
I REALLY hope a solution from Apple comes soon and this is not some new policy of theirs. If so, it may be the last Mac Pro I will or can ever own. The reason is I do a lot of 3D work with C4D, Vue, Modo and Photoshop CS4 so I MUST have a monitor like the high-end ones from Lacie that have 100% color gamut and Adobe RGB. I can NOT be tied down to an Apple Cinema display due to that work. At this time, it seems this means I would only get 1600X1200 resolution on that 24 inch monitor.
Has anyone else confirmed this too and if so what the heck is Apple thinking or better still going to do about it? I LOVE my Mac Pro but if they start forcing displays on us then I won't be buying another Mac, it's just that simple.

Thanks, but I think two things may be different in that setup.
1. If I understood correctly, it's a first gen without a "Mini Display Port" and
2. It was a laptop not a Mac Pro with a video card.
I think it has specifically to do with either one or both of the above combos. In particular I think it's the video card they are putting in them.
I am not sure if a new 2009 Apple laptop with a Mini Display Port connected to a NON Apple display would have an issue or work like yours does now. It would be interesting to get to the bottom of this for sure because it REALLY hurts people like myself that are into 3D design.
I will try to get back on this once I continue to find out more details.

Mini Display Port Not Working, WHY?

When I first got my MacPro I tried to display two monitors and couldn’t as the Mac didn’t detect anything fed from the Mini Display Port.
When connecting Either my BenQ M2700HD, BenQ FP222W or My Wacom Cintiq 12wx to the MAC via the Mini Display Port none of them were detected by the MAC. However all 3 work through the DVI Port on the MACPRO itself.
I have tried 2 HDMI>MiniDisplayPort (officail apple) adapters in order to rule out the adapter itself and neither fixed the problem.
Therefore I can only guess that its the Mini Display Port’s internal connection.
Any help you can provide would be greatly appreciated.

I havent yet opened up the computer as im hoping i can solve the problem without doing so.
It's a mac pro so all it takes to get inside is to take the lid off, right? Not a big deal. But so far, for this problem, I'm not sure what you would plan to do whle "in" there.
I checked all external connections and they are all 100% secure and fully seated.
Ok.
I have notice that when i turn the 2nd monitor on/off (on the monitor itself) the 1st monitor flashes blue.
Why would it be doing this and still not detect the monitor itself?
Because a video card problem? Maybe you need a replacement. I supose it's possible for the mDPs to not wiork even though the DVI does.

HDMI to Mini Display Port not working?!?!

Hi,
I use my macbook Air (latest one with mini display port) to watch movies on my TV. I use a hdmi to mini display port adapter cable which worked perfect for about 6 months. Yesterday, I plugged my mac in and nothing appeared. I have no idea why- no settings have been changed.
As usual, the screen goes blue and then back to normal but the TV screen is plain black. In the Display settings, the 'arrangements' tab is missing where I can set mirro displays things. I tried bying a new adapter and trying this with my sister's macbook pro but it still doesnt work.
Any ideas on why this has happened & to how I can fix it?
Thanks for your help

This is probably NOT the solution you're looking for, but use a 3.5mm to 3.5mm (headphone jack) cable to transmit sound. I use stereo speakers with my setup, sounds far better than the TV.

Mini display port not working in xp

Got windows xp partitioned onto macbook pro, and everything else works fine, but trying to use the mini display port does nothing when connected to a tv. any ideas? am I missing a driver?
I looked around and other sources say that it should see the MDP as an external monitor but the only display option I get is the graphics card itself.
please leave some advice, I really want to play some fallout on the big screen

omg nm, figured it out, went into the nvidea settings and set it up there

GS70 miniDP/mini Display Port not working

Hi forum,
I recently got a GS70 with 860m graphics that runs win8.1. I can use the HDMI interface with no problems with various monitors. The displays are detected both by the intel software as well as the "change screen resolution" config of windows.
When I plug a monitor into the miniDP ports however the displays are not detected by the system. I tried this with a 27" Samsung as well as a 30" Dell U3011. I used a miniDP2HDMI cable, a miniDP2DP cable and an active miniDP2DVI adapter, none of them works. I am using the latest Nvidia drivers, they have been updated online through the nvidia experience stuff.
I tried to troubleshoot this by using an Ubuntu live CD with the same results. HDMI works out of the box as soon as I plug a cable in. Nothing happens when I use the miniDP cable though.
I also noticed that one cable (miniDP2HDMI) I can put fully into the miniDP port while the other one(miniDp2DP) sticks out 3-4mm and does not seem to go into further even with force. They look alike and the packaging clearly says "miniDP..." though.
How can I fix this?
Thanks.

Quote from: johannes.haase on 09-January-15, 20:16:14
Hi forum,
I recently got a GS70 with 860m graphics that runs win8.1. I can use the HDMI interface with no problems with various monitors. The displays are detected both by the intel software as well as the "change screen resolution" config of windows.
When I plug a monitor into the miniDP ports however the displays are not detected by the system. I tried this with a 27" Samsung as well as a 30" Dell U3011. I used a miniDP2HDMI cable, a miniDP2DP cable and an active miniDP2DVI adapter, none of them works. I am using the latest Nvidia drivers, they have been updated online through the nvidia experience stuff.
I tried to troubleshoot this by using an Ubuntu live CD with the same results. HDMI works out of the box as soon as I plug a cable in. Nothing happens when I use the miniDP cable though.
I also noticed that one cable (miniDP2HDMI) I can put fully into the miniDP port while the other one(miniDp2DP) sticks out 3-4mm and does not seem to go into further even with force. They look alike and the packaging clearly says "miniDP..." though.
How can I fix this?
Thanks.
have you tried to press fn + F2 button? some times some displays wont give signal untill you press that button and then laptop one will either go black or go off then on again and then external monitor will wake up and give picture so try it if you havent and then return back to us if it works or not.

Mini display port not working?

I am trying to connect my late 2009 iMac to an extenal monitor. Been to store twice now and both adapters are not fitting??? Am I missing something here...
Thanks

Yup you are missing something what I don't know, however the first thing is learning how to insert a photo into this forum. Use the camera icon you see when you are replying or creating a message and follow the prompts. The second is following Apple's instructions for connecting an external display, which is located at:
support.apple.com/kb/HT5019

Dell XPS 15 l502x mini-Display Port stopped working after update.

After the updates on the 11-10-2014 my mini-display port (which worked great previously and is part of the Intel Graphics) stopped working.
Am running Arch 64bit with Slim + E19
The symptoms are:
1. Detects monitor from the laptop and xrandr throws no errors
2. Enlightenment thinks the screen is connected and it appears in the screen setup as on.
3. The monitor no longer recognizes that there is a laptop plugged in and just stays off...
kernel.log
Oct 13 10:10:19 localhost kernel: [drm:cpt_set_fifo_underrun_reporting] *ERROR* uncleared pch fifo underrun on pch transcoder B
Oct 13 10:10:19 localhost kernel: [drm:cpt_serr_int_handler] *ERROR* PCH transcoder B FIFO underrun
Oct 13 14:09:35 localhost kernel: [drm] Wrong MCH_SSKPD value: 0x16040307
Oct 13 14:09:35 localhost kernel: [drm] This can cause pipe underruns and display issues.
Oct 13 14:09:35 localhost kernel: [drm] Please upgrade your BIOS to fix this. (Will look for an update...)
lspci | grep Intel | grep VGA
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
Here are the packages that I think I may have to swap around...
[2014-10-11 19:16] [PACMAN] removed ati-dri (10.2.8-1)
[2014-10-11 19:16] [PACMAN] removed intel-dri (10.2.8-1)
[2014-10-11 19:16] [PACMAN] removed nouveau-dri (10.2.8-1)
[2014-10-11 19:16] [PACMAN] removed svga-dri (10.2.8-1)
[2014-10-11 19:16] [PACMAN] removed lib32-intel-dri (10.2.8-1)
[2014-10-11 19:16] [PACMAN] removed lib32-nouveau-dri (10.2.8-1)
[2014-10-11 19:16] [PACMAN] upgraded apache-ant (1.9.4-2 -> 1.9.4-3)
[2014-10-11 19:16] [PACMAN] upgraded libdrm (2.4.56-1 -> 2.4.58-1)
[2014-10-11 19:16] [PACMAN] installed mesa-dri (10.3.0-3)
[2014-10-11 19:16] [PACMAN] upgraded wayland (1.5.0-1 -> 1.6.0-1)
[2014-10-11 19:16] [PACMAN] upgraded mesa (10.2.8-1 -> 10.3.0-3)
[2014-10-11 19:16] [PACMAN] upgraded mesa-libgl (10.2.8-1 -> 10.3.0-3)
[2014-10-11 19:16] [PACMAN] upgraded libva (1.3.1-2 -> 1.4.0-1)
[2014-10-11 19:20] [PACMAN] upgraded linux-lts (3.14.19-1 -> 3.14.20-1)
[2014-10-11 19:27] [PACMAN] upgraded xf86-video-ati (1:7.4.0-3 -> 1:7.5.0-1)
[2014-10-11 19:27] [PACMAN] upgraded xf86-video-intel (2.99.916-2 -> 2.99.916-3)
As far as I can see my options are to try and roll back via pacman -U in my /var/cache... or to figure out how to make my Nvidia HDMI output work using Synergy...
I suspect this is some type of driver regression (kernel/mesa/xorg) but am not sure as I have not seen much information about this issue online.
Unless someone has a better idea... when I get time to try to resolve the issue I will update this post.
Ok I missed this from dmesg:
[11671.333426] WARNING: CPU: 0 PID: 486 at drivers/gpu/drm/i915/intel_dp.c:137 intel_dp_max_link_bw.isra.9+0x3e/0xa0 [i915]()
[11671.333428] invalid max DP link bw val 0, using 1.62Gbps
[11671.333430] Modules linked in: ctr ccm bnep ipt_REJECT xt_conntrack iptable_filter xt_CHECKSUM xt_tcpudp iptable_mangle ipt_MASQUERADE iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack ip_tables x_tables uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core fuse v4l2_common ecb videodev media btusb bluetooth 6lowpan_iphc coretemp hwmon intel_rapl x86_pkg_temp_thermal intel_powerclamp joydev mousedev snd_hda_codec_hdmi kvm_intel arc4 snd_hda_codec_realtek snd_hda_codec_generic kvm iwldvm snd_hda_intel snd_hda_controller crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel cryptd snd_hda_codec r8169 iwlwifi snd_hwdep dell_wmi snd_pcm sparse_keymap iTCO_wdt snd_timer snd mii iTCO_vendor_support dell_laptop microcode pcspkr dcdbas dell_smo8800 psmouse serio_raw
[11671.333467] thermal soundcore i2c_i801 shpchp evdev mac_hid mei_me mei lpc_ich wmi processor ac battery pci_stub vboxpci(O) vboxnetflt(O) vboxnetadp(O) vboxdrv(O) udlfb syscopyarea sysfillrect sysimgblt fb_sys_fops tun nfs lockd sunrpc fscache vhba(O) bridge stp llc brcmsmac cordic brcmutil led_class bcma mac80211 cfg80211 rfkill bbswitch(O) ext4 crc16 mbcache jbd2 sd_mod sr_mod crc_t10dif cdrom crct10dif_common atkbd libps2 ahci libahci ehci_pci libata xhci_hcd ehci_hcd scsi_mod usbcore usb_common i8042 serio i915 button intel_gtt i2c_algo_bit video drm_kms_helper drm i2c_core
[11671.333506] CPU: 0 PID: 486 Comm: Xorg.bin Tainted: G W O 3.16.4-1-ARCH #1
[11671.333509] Hardware name: Dell Inc. Dell System XPS L502X/0YR8NN, BIOS A04 03/25/2011
[11671.333511] 0000000000000000 00000000c0982604 ffff8800b2b4fa80 ffffffff8152ba1c
[11671.333515] ffff8800b2b4fac8 ffff8800b2b4fab8 ffffffff8106e45d ffff880037c92000
[11671.333518] 0000000000000000 0000000000000004 ffff88014e2d8c00 ffff8801b5a2f800
[11671.333521] Call Trace:
[11671.333528] [<ffffffff8152ba1c>] dump_stack+0x4d/0x6f
[11671.333534] [<ffffffff8106e45d>] warn_slowpath_common+0x7d/0xa0
[11671.333537] [<ffffffff8106e4dc>] warn_slowpath_fmt+0x5c/0x80
[11671.333553] [<ffffffffa00f543e>] intel_dp_max_link_bw.isra.9+0x3e/0xa0 [i915]
[11671.333566] [<ffffffffa00f5539>] intel_dp_compute_config+0x99/0x660 [i915]
[11671.333579] [<ffffffffa00da214>] __intel_set_mode+0xb14/0x1670 [i915]
[11671.333608] [<ffffffffa00dd4e6>] intel_set_mode+0x16/0x30 [i915]
[11671.333638] [<ffffffffa00de623>] intel_crtc_set_config+0xa83/0xdd0 [i915]
[11671.333666] [<ffffffffa0025fa1>] drm_mode_set_config_internal+0x61/0xe0 [drm]
[11671.333690] [<ffffffffa002984b>] drm_mode_setcrtc+0x2ab/0x5b0 [drm]
[11671.333712] [<ffffffffa0019b9f>] drm_ioctl+0x1df/0x680 [drm]
[11671.333728] [<ffffffff811d4db0>] do_vfs_ioctl+0x2d0/0x4b0
[11671.333737] [<ffffffff811df4ee>] ? __fget+0x6e/0xb0
[11671.333745] [<ffffffff811d5011>] SyS_ioctl+0x81/0xa0
[11671.333753] [<ffffffff815317a9>] system_call_fastpath+0x16/0x1b
[11671.333758] ---[ end trace 64be8044e26ca3c5 ]---
Last edited by scmurcott (2014-10-13 19:12:07)

So I downgraded those packages and the kernel with no luck.
I tried to get the HDMI working via Synergy... and failed
I then tested the Display Port on Windows and it did not work there either - exhibiting the same symptoms as Linux - the OS sees the monitor but no data was transferred.
So I ended up using one of my Display Link monitors at work... the USB monitors were ok, just an irritation with a flickering mouse.
I hope it is the miniDP>HDMI adapter and not the port... very frustrated by this problem.
I hope to test another adapter soon.
I think as nobody else is experiencing this issue that it may well be hardware/firmware related.
Hope there is a happy end to this post but not feeling so positive right now.

Yesterday suddenly the sound output from my Headphone is not working

Hi, I've Mac Book Pro 15" with Retina display. Yesterday suddenly the sound output from my Headphone is not working. When I tried to solve this, I've noticed in system preferences it's jumping from Internal speakers to Head phone and vice versa. Can anyone help me on this issue please? I am using the original Apple Headset only.
Thanks
Babu
<Re-Titled By Host>

Tell us:
OS X version ?
What may have changed prior to the onset of the issue of "... suddenly... not working..." and " ... preferences ... jumping from ..." ? Software added, upgraded, updated?
what precidely do you mean by " ... preferences ... jumping from ..." ?
ÇÇÇ
EDITadded
I see that your Question has languished for some period of time without response. You have posted your issue in Using Apple Support Communities whose topic is 'How to use this forum software's interface, features and/or how to find what you wish'. It is a relatively low traffic and inappropriate forum for your problem. I will ask our Hosts to move it to " MacBook Pro " where it may get a more rapid response from your fellow users.
endEDIT

Mini-Display Adapter Not Working?

Hello,
Has anyone had issues with the Apple mini-display to Dual-Link adapter? Any problems getting it connected to the DVI cable (very tight fit) or have a dead on arrival adapter?
I have a Mac Pro 6-core. I just received my 27-inch monitor and plugged it into the Mini-display port. I have two other monitors - Dell 21-inch monitors. One is hooked up to the DVI port on my Radeon HD 5870. The other was hooked up to the other mini-display port via the Apple Mini-display to Dual-Link DVI.
When I try to connect the DVI cable to the Dual-Link DVI side of the adapter, it is a very tight fit. To get the screws to take hold, I have to press very firmly. Once secured, I plugged it in and the monitor is not recognized. Previously (before the 27-inch monitor came in) I used this very same monitor and DVI cable and it worked fine in the Radeon DVI slot. Still I swapped cables, switched mini-display ports, and switched the two Dell monitors around. And none of the pins on the cables are bent or damaged. It appears it is the mini-display to DVI adapter.
I am in the military overseas, so to return it to Apple is a major event. So I want to be sure it is the adapter before i go to the trouble and expense of sending it back, having Apple send it to a family member, then have that family member send it to me (since Apple doesn't send items to FPO/APO addresses). Anyone else have any issues with the adapter?
Jim

Let me be clearer; I've got the MDP-DVI adapter connected to a cable that is DVI on one end and HDMI on the other. I've got both laptops so I can compare side by side. I plug in the MDP-DVI adapter to the old laptop and all works well; I plug it into the new laptop and while the laptop does see the TV, the display modes for it are all 1080p which is wrong I don't see any desktop image on the TV unlike when I plug it into the older laptop. This is very disappointing as I expect things to just work with Apple products.

Mini dv port not working

When the mini dv port stops working, is there anything software wise that might resurrect it? This is on a refurb (from Apple) 2008 MBP, and the port was never actually used for anything until this past week, and it is not working. Could it be software related? Suggestions for repair? I've looked everywhere but it seems this is a very uncommon problem.

When the mini dv port stops working, is there anything software wise that might resurrect it? This is on a refurb (from Apple) 2008 MBP, and the port was never actually used for anything until this past week, and it is not working. Could it be software related? Suggestions for repair? I've looked everywhere but it seems this is a very uncommon problem.

What adaptor do I need to connect from mini display port to a dvi monitor

I want to connect a 2nd monitor to my mac mini via the mini display port, will the Apple adator do this ok or will I need an active adaptor

I had trouble with different Mini DisplayPort to DVI adapters, including a couple of Apple branded ones.
When I mentioned the problem to the Apple rep. at Fry's. He walked straight over to the rack, handed me a > Kanex Mini DisplayPort to DVI-D Adaper grined and said, I've never had one of these baby's come back.
After that my 2010 Mac Mini has been very stable running Dual 21.5" Samsung DVI monitors. One in on the Apple Supplied HDMI to DVI adapter, the other now on the Kanex Adapter has been rock solid for over a year.

Mini DVI port not working on Macbook

I often watch movies streaming on the internet by connecting my Macbook to my television via my Mini DVI to S-video adaptor cable.
Last week, however, it suddenly stopped working. The television can still detect the display, but the image is super distorted and moving in a static-ey way. I can only vaguely make out the icons on my desktop on the TV screen.
I thought that perhaps my adaptor cable was at fault, so I bought a new one - but the problem remains. I have also tried resetting the PRAM, repairing the disc and permissions with Disc Utility, and cleaning the Mini DVI port. I am pretty certain that it is a hardware problem with the port itself.
One of the pins on my Mini DVI port looks like it could be out of place. It is kind of squished at the bottom of the port instead of laying flat like the others. I’m thinking that this might be the culprit. However, I have tried to straighten it out using a safety pin and I’m not really able to do it.
Am I right to assume this is a hardware problem with my port? Any advice about how I might go about fixing this? Is there a way to repair the port without having to replace the whole logic board?
The Macbook in question is a 2008 Core 2 Duo running Lion.
Any suggestions at all would be much appreciated!

Do not dismiss the possibility that the problem may be with the TV. Based on what you have tried so far, an appointment at an Apple store genius bar is your best option. The evaluation will be FREE and then you should be in a position to make an informed decision.
Ciao.

Mini display port wont work.

I have bought an mini displayport to DVI adapter for my x1 Carbon, but when i plug it in the external display is just black. Do it need to some kind of special mini display adapter?
I have tryed to BIOS update, installed all the reqiuerd drivers and latest monitor driver. Nothing is working...
Does someone have any sugestion?
Best Regards
Martin

Hi Martin,
Welcome to Lenovo Community!
As per the query we understood that you are facing issue with Display port on your ThinkPad X1 Carbon.
Have you checked with this ‘Lenovo Mini-DisplayPort-to-DisplayPort Cable = 0B47091’.
Hope this helps.
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Z87 - G45 Display ports not working

I recently bought a custom computer from cyberpowerpc.com with a Z87-G45 motherboard and an AMD 7700 graphics card.
When customizing this PC I had the goal of dual monitoring in mind, thinking I could use a port from the motherboard for one and then a HDMI to DVI port on the 7700 for the other.
When I opened the box to set up the computer none of the display ports on the Z87-G45 work. No HDMI, VGA, or the DVI.
I am currently using the HDMI port on the 7700 to a DVI for one monitor and wanted to run the second monitor off the VGA on the motherboard. None of the display ports work at all on the Z87-G45 whether trying to run 1 monitor or 2.
I've tried installing the VGA drivers from the MSI website but it gives me an error message saying I don't meet the minimum spec standards which I am sure that I do.
I've also ran the Live Updater 5 installing the new bios and other updates. I also tried to get the drivers from the black CD that came with the order but I was unable to click the driver box from it being faded out and unselected.
Can anyone help me find a way to get the ports on the motherboard working? As well as helping me determine if I can actually run two monitors with one off the 7700 and the other off the motherboard?
Thanks!

So I took your advice, returned the Hd7770 and got the 2gb HD7870 then watched a youtube video on how to install a video card.
I tested it on playing Diablo 3 and Star Craft 2. Reset video settings to defaults. Now both games seem to be a little jumpy on the video. SC2 detected the video card and loaded the suggested settings. When I play SC2 it seems a bit laggy and the video freezes then jumps every now and then. Same with D3 when I increase the video settings for the shadows, and foreground and background frame rates.
It seems odd that it would be jumpy for SC 2 using the suggestest settings for my video card.
Could it be something else on my setup that is holding the game back?
Could I have installed the video card incorrectly? Would it work/ be detected if I hadn't?
Everything seemed fine when I used the HD7770 and I didn't notice much of a change in the video settings for either game, but I am assuming there would be.

Sound Out from Mini Display Port Not Working on a Particular TV

Similar Messages

Maybe you are looking for