Sound out issues

hey i got something odd. couple weeks after i upgraded to 10.2.8 my sound out is acting up. it put the volume at two squares and it still blares in my ears. could it be because i unplugged the speaker because the cable to the speaker ripped somehow. i doubt it because its just a cable nothing important

ha ha for once a pram reset worked for me!

Similar Messages

In logic Pro, when I open up an audio track and load an audio file, there is no sound. I will finally get a sound out of one of the audio tracks after opening at least 5 of them alternately. Is anyone familiar with this kind of bug? It's really frustratin

In logic Pro, when I open up an audio track or software track and load an audio file/loop or software file loop, there is no sound. I will finally get a sound out of one of the audio or software tracks after opening at least 5 of them alternately. Is anyone familiar with this kind of bug? It's really frustrating as this takes much time to complete work.
os x, Mac OS X (10.6)

I'm not sure I follow your words Fuzzynormal. You've helped by offering the insight that my issue in Logic Pro 9 is not a bug but a feature. But fell short of enlightenment by being a judge of character and of how one should interact in this forum. You insinuate that I haven't tried to solve the issue on my own when in fact I have. These forums are always my last resort. You further suggest that I am complaining. This is not a complaint. It is a genuine issue that I cannot figure out. Then you think that Brazeca is holding my hand and being a nice guy. Brazeca is helping people like me who might not be as adept at using Logic Pro as probably you are.This community forum was established to raise questions, answers and dicussion to help Apple's customers better undertand their operating systems and related issues. You are doing a disservice by not contributing positively and by trying to make this forum what you want it to be. You may have all the time in the world to try figuring out stuff but we are not all like you. We all have different schedules and different levels of understanding. And that is what this forum is for - to help people move forward. If you can't contribute positively then keep silent. And by the way, you say to "read the words that are printed down to explain to you how that works" what words are you talking about? Why don't you be of some help instead of trying to own this forum.

No sound out of back line out MacPro Bootcamp 3.1 Windows 7 64bit

No sound out of back line out speakers.
MacPro Early 2008
Bootcamp 3.1
Windows 7 64bit
Realtek HD audio driver.
I have speakers plugged into the back line out.
They work in Mac 10.6.4 (as always) and in Parallels 5 Windows 7 using Bootcamp partition.
All other jacks work. In Realtek driver it shows nothing connected to that jack.
Anybody else have this issue?
Anybody else have solved this?

Anyone at all?
Even if you don't have the issue yet have a similar setup. Maybe I can figure out if there's a driver update I may need.
BTW I KNOW others have this as I've seen this mentioned on other forums. What I do NOT know is whether it's "everyone" or there's something about systems that don't have this issue, I need to follow.

Can't get sound out of imac

I am a musician and am trying to mix down some tracks off of a hard disk. I have a hard disc recorder and a mixing board that i am running into an M-audio Firewire solo. I have the signal flow going into the firewire solo and then into my mac. when i click on the system preferences and go to sound I have the fire wire solo as the input and the headphone as the output. i see good signal coming into the mac but can't seem to get any sound out of the mac. the headphne out is hte only thing I see as an output which i have selected. please help - I cant hear anything!!

.. It can't be an m-audio issue when i have a great input signal could it?? ..
with my humble experience of 20 years with Macs - no, that is not neccessairly a (computer's) logic conclusion ..
as said, I just have some know-how with iM/camcorders... and we do experience some same 'effects', e.g. 'cause camcorder is import-disabled, as many Euroepan devices are ... or, we experience control over camera via firewire but no picture etc.pp.
different approach:
are you able to use your devcie with other apps, e.g. Logic, Grarageband.
it is an audio-interface, I assume, you're using in mainly for ... ehm, audio.

Can't get sound out of safari

hey all,
i am not able to get sound out of my mac?! And thats only on Safari. I cant watch any videos now! please help.
thanks in advance

Hi
I'm far from an expert on "sound" issues. I believe OS X's sound file is designed to be functional for 16 bit sound files, not 24 bit. 24 bit sound file offer enhanced sound quality, but are larger in size. Perhaps not yet practical for web sites.
explaining the difference between the two settings.
Thanks for the green star.
Aloha from Big Island
iMac G5 Rev C 20" 2.5gb RAM 250 gb HD/iBook G4 1.33 ghz 1.5gb RAM 40 gb HD Mac OS X (10.4.9) Seagate 300 gb ext. HD Canon i960 printer, Airport Express (2 units)

Dv6 Only plays Sound out of the built in speakers if headphones are plugged in ...please help

My Pavillon Dv6 Only plays Sound out of the built in speakers if headphones are plugged in. It plays sound from both when there plugged in. Please hep me.

Step 1:
In troublshooting the problem you may follow the steps provided below.
a. Click Start, type Sound in the Start Search box.
b. Click Sound in the search results at the top of the Start menu.
c. Click the Playback tab. Notice the check mark next to the default device. For most users,the default device is speaker, change it to headphones. Make sure that your audio settings are configured as expected.
Step 2:
On the Playback tab, select the playback device, click Properties, click the Advanced tab, and make sure that the Default Format is set to the value that you expect. When you finish, close this window to return to the previous window.
Step 3:
On the Playback tab, select the playback device, click Configure, and then make sure the configurations are set correctly.
Method 2:
If the issue persists then I suggest you to follow these below mentioned steps to mute all other sounds when windows detects any communications activity.
a. Click Start, type Sound in the Start Search box.
b. Click Sound in the search results at the top of the Start menu.
c. Click the Communications tab.
d. Click on the radio button according to your convenience, under When Windows detects communications activity.
After performing the above steps you may check for the issue.
For more troubleshooting you may visit this below mentioned link.
Tips for fixing common sound problems
http://windows.microsoft.com/en-us/windows7/Tips-for-fixing-common-sound-problems
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Sound out on 5 hd channels

charter hd box , second box, sound out or get one word then out and one word out etc , only on 5 hd channels. tried optical and coaxle does the same on both. sound does work played through tv on hdmi. is it charter or my denon reciever causing the problem or something else

Charter.
If the issue happens on some channels but not others, that automatically means there is a problem with the source its coming from (i.e. your cable box)
Anything i say is not a direct response from Best Buy or Geek Squad. I just post on here to add my insight.

I getting no sound out of the USB connection in my car from my new iPod Classic. Has anyone encountered this problem?

I getting no sound out of the USB connection in my cars from my new iPod classic. The song name artist display on the console in the car but no audio. This is happening on 2 cars - Nissan Rogue and Acura TL. My older iPod classic played fine in these cars. Has anyone encountered this issue?

I have a similar problem with a 160 gb Classic, about 5 years old - if I move the plug one channel may be heard and tehn the other. The interface works but not the sound. Different ipods eg nano work perfectly.
The two cars I have are an Audi and a BMW and both have manufacturer connectors

DDL or DTS = no sound out of rear speak

I have a sb xfi plat with optical out going to a dd/dts reciever and every time i play an mp3 i only get sound out of the front speakers and not my rears, is anyone else having this issue?

bigjohns97 wrote:
Thank you for the responce, however with every other DDL / DTS connect (nforce2 soundstorm,?blue gears, auzentech) you could enable DDL or DTS connect and any stereo source would automatically be 5. or 6. surround sound. See below.
MP3 source -> real ddl/dts connect sound car?-> dolby digital / dts stream -> external reciever with dolby digital dts light on +sound on all speakers
On the sound blaster the following happens
MP3 source ->?sb xfi plat -> dolby digital /dts stream with only 2 channels being used?-> external reciever with DD or DTS light on + sound from only front speakers.
Are you telling me this is how?creative designed this to work because?it isn't working like?every other DDL / DTS connect card out there.
I don't kow how and where exactly the defferences are between those solutions. But as I told it, it is the way the Creative implemention handles it. If you don't use CMSS-3D or use the surround functions of you Decoder (I have a seperate balance for "surround" on my Z-5500 where I can set If the rear speaker are used *at all*) you won't get automaticly Surround Sound with MP3. Of course it still depends a bit on you player software, there are player/filters (AC3 Filter; ffdshow) out there which can do that too. Upmixing Stuff, I mean but then you don't really need DDL. I use it to encode actual game sounds, because strangely I don't have any popping and noise in there while I use it (just read up that crackling/popping thread.

Sound out

first one speaker stopped working then the other.
external sound out via socket is ok. i gather this
is a logic board issue. anything to resolve the
problem?

Hmmm, given that it's the same under OS9 on a separate partition, seems like a hardware issue. I don't know how likely it is to tell you anything, but I'd run Apple Hardware Test and see if it turns anything up.

Only getting sound out of one spea

Okay, so a while ago my speakers crapped out on me and I could only get sound when I used headphones, which was something I tolerated for some time. But now, just recently (after I got a high-speed internet connection, actually), I can only get sound out of the left headphone. Can anyone give me some assistance here? According to the device manager, I have a Creative Sound Blaster AudioPCI 64V...so I'm not sure if I have a Sound Blaster AudioPCI or a Sound Blaster PCI64. Anyway, I tried installing the drivers for the latter, but it didn't help anything. What's the deal, anyone? Does it sound like a sound card issue, or is it perhaps my speakers?

EverclearFan,
Did this soundcard come preinstalled in your computer? If so you will need to contact your computer manufacturer for support as the card may be OEM. OEM components are often modified from their retail standards and require special drivers that only the Vendor will have access to.
Jeremy

Hi , I suhail khan from india and i am user of iMac system 10,1.These days i am facing the sound enabling issue with my iMac system I am not able to hear sound in my iMac system.So kindly suggest me how to enable sound in my iMac . Please no the needful.

Hi , I suhail khan from india and i am user of iMac system 10,1.These days i am facing the sound enabling issue with my iMac system I am not able to hear sound in my iMac system.So kindly suggest me how to enable sound in my iMac . Please no the needful.

Take each of the following steps that you haven't already tried.
1. If you've recently plugged anything into the audio-out (headphone) port, plug and unplug it a couple of times.
2. From the menu bar, select
 ▹ System Preferences ▹ Sound ▹ Output
Check the settings. The internal speakers should be selected as the output device, the Mute box should not be checked, and the volume slider should be at least halfway to the right.
3. Look inside the headphone port. If a red light is coming from the port, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a headphone mini-stereo jack of the proper size.Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.
4. Boot in safe mode by holding down the shift key at the startup chime. It will take much longer than usual. You don't have to log in; just reboot as usual (without holding any keys) when the login screen appears. (Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.)
5. Reset the NVRAM.
6. Reset the SMC.
7. Reinstall OS X after backing up all data as a precaution. You won't need your backup unless something goes wrong.
8. Make a "Genius" appointment at an Apple Store.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to bare metal from any of them.) Don’t erase the recovery partition, if present.
*An SSD doesn't need to be zeroed.

Routing sound out of logic

I have just purchased a Korg Monotron and am very pleased with it!
I am trying to send sound out from Logic into the Monotron, and then filter the audio in the Monotron and record this back into Logic, however I have a problem.
The audio I want to send out of Logic is routed to outputs '1 & 2' on my Edirol UA-25 interface.
I take a mono output from one of these outputs on the rear of the interface, and feed this into the Monotron headphone socket.
The issue is that when the sound is fed back into Logic, I can't hear the filtering effects because it is drowned out by the audio track I am sending out.
How can I mute the sound of the outputted audio so that I can only hear the subtleties of the filtering effect in Logic.
Can anyone explain a workaround for this, or is there no solution as the audio always need to be audible to in order leave Logic, or else no sound would be sent.
Any advice welcome!
Cheers,
Mr Rock

Hi Dat Stream Studio,
This sounds very promising!
Can you please confirm when in 'Audio Midi Setup', do I go to 'Audio Devices'.
If I select 'Audio Devices' then I have two setting- 'Default Output' and 'System Outputs'.
At present both are set to 'Edirol'.
Can you please suggest which ones I need to configure as 'Mac Internal'.
When this has been set up is all sound outputted through 'Mac internal' audio, and do I connect a lead from the iMac headphone socket into the Monotron?
To get sound back into Logic, should I connect the Monotron into say Input 1 on the Edirol, and then set up an audio track with the 'I/O' plug in set to audio 'Input 1 (and leave the 'output' blank)?
I look forward to your response.
Cheers,
Mr Rock

TS4559 only getting sound out of right ear, on recently downloaded i tunes account.. I phone 4

Only receiving sound out of right ear bud on a recently activated I tunes account.. I phone 4

Hey there Stowe Away,
It sounds like your headphones that came with the phone only work on the right side. I recommend these steps from the article named:
Troubleshooting iPhone, iPad, and iPod touch accessories
http://support.apple.com/kb/ts2634
3. Disconnect and Restart
Disconnect the accessory and turn it off, if possible. Restart iPhone, iPod touch, or iPad by turning it off and then back on. When the Home screen reappears, reconnect the accessory.
4. Isolate
Isolate the issue to the accessory, if possible. Or, if available, try to reproduce the issue with another identical or similar accessory.
6. Restore iPhone, iPad, or iPod touch
Restore iPhone, iPad, or iPod touch to its factory default state. You should rarely need to use this step with an accessory issue. If the issue only affects a third-party accessory, contact the manufacturer before restoring the device.
Thank you for using Apple Support Communities.
All the best,
Sterling

No Sound out- test one, two- Sound bars are lighting up but nothing coming out built in audio

For some reason I can't get any sound out of premier pro. I haven't used it many times before but I'm sure I ahd audio when I did.
I switched from doing compositing in After Effects to PPro because AE was chooking on a simple luma track matte using one video to matte/key another... so I find myself in PPro.
Is there anything simple I could be missing which would explain why I'm not getting audio out of my Built-in speakers from Premier? iTunes kicking out the jams no probs.\ as was AE
Strangly every time I start SoundFlowerBed it quits as soon as I leave it. Normally keeps a little flower icon in the menu bar (OS X) to access it and route it's audio bus (SoundFlower itself is a low-letency audio routing system extension) to various outputs.
With SoundFlowerBed I can access OS X Audio Setup (as opposed to Sound Control panel)

I found an uninstaller in Utilities and it has a cross thru it indicating not OS compatible. I dounble clicked and tells me it's a PPC app that can't be run (since I'm on 10.7.5 no rosetta for PPC). I'm not certain that relates to the actual SoundFlower that is running, it may just be a relic of auto-migration from a PPC MacPro.
Are you taking guess Jim or do you know there are issues b/w the two softwares?
I'm going to the Cycling74.com | Soundflower website now to investigate further.

Sound out issues

Similar Messages

Maybe you are looking for