Sound out of iTunes is "Warbling"

Today, when I opened iTunes to listen to radio, the sound coming out of it was "warbling", like every tone is repeated once. I was running 5.0.1, so the first thing I did was update to 6.0.1, but the same thing was still happening.
When I open Windows Media Player, the sound out of it is just fine.
This is the first time that anything like this has happened and I've been using iTunes and iPod for a couple of years.
What should I do? Is there a different discussion group on which this problem would be better suited?

Did you see this topic a few lines down from yours?
http://discussions.info.apple.com/webx?128@@.68bd1705

Similar Messages

  • I can't get any sound out of iTunes when i play a song.

    Ever since i upgraded iTunes i can't get any sound out of it. The player shows the bar moving through the song but nothing is heard.

    Go to the link below.Enter your Product Number as listed on Service Tag attached to bottom of notebook (may be under battery). You can also get the Product Number by pressing Fn + Esc key. After entering PN, click Next ,then choose Software & Drivers.On the next page use the dropdown to select your OS (probably Windows 7 64bit). A list will populate with drivers. Download & install the latest Audio driver.
    http://h10025.www1.hp.com/ewfrf/wc/siteHome?cc=us&​lc=en
    ```````````````````````````````````````
    If still no sound,try a hard reset, works sometimes.Disconnect all external devices first.
    1-remove power cord and battery
    2-press power button for 30 seconds
    3-reinstall only power cord for first startup.
    4-power on
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • TS1424 I rented a movie to play on my iPad. With 28min remaining the picture froze but the counter kept running. No sound. I tried everything....I reset my iPad...logged out of iTunes and logged back in and opened movie. It stopped at the same spot the ne

    I rented a movie to play on my iPad. With 28min remaining the picture froze but the counter kept running. No sound. I tried everything....I reset my iPad...logged out of iTunes and logged back in and opened movie. It stopped at the same spot the next time

    SharmFarm wrote:
    Good ev Ning Mario49    firstly I would like to say a great thank you for your attention to trying to help me,,,,,    i have looked at the links and will try everything stated first thing…
    Hi Mario,,,,
    I tried everything in your reply,,, thank you again,, I had done that once before and all was working great,,
    I have just now tried the Reinstall via iTunes, about 20 into the download, the iTunes logo on the phone disappeared, and the Apple Logo appeared again,,, I waited until the iTunes stated that the download had finished, and the install was in progress,,,
    Nothing happened, still the Apple Logo was visual on the screen, iTunes never recognised the phone which it was on my iTunes account previously,,,
    Still just a bunch of lines, maybe 5 or 6 so small writing,, I personally can not read what it is telling me, someone said it reads, incorrect shutdown,,,????????
    Please advise,???
    I am now at a loss,,, I really became excited when I saw the iTunes icon after putting the phone into restore,,,???
    Thank you again
    D

  • My downloaded paid for video loses sound every 15 or so minutes, so I have to contstantly log out of iTunes and log back in and then it works - what's the problem (apart from what I've just said), does anybody know?

    My downloaded paid for video loses sound every 15 or so minutes, so I have to contstantly log out of iTunes and log back in and then it works - what's the problem (apart from what I've just said), does anybody know?

    What ISP?
    What router?
    Who made it, what software?
    Is it just the iPad ( Anything else using wifi at your place having problems? ) ?
    Give us something to go on.

  • How do I find out where iTunes thinks missing files are?

    I have several hundred "missing" files in my iTunes library but they are all actually on the computer. But I don't remember where the were previously. I add dozens of songs at a time to my library all the time and there is no Earthly way for me to constantly remember where they were before. I don't just want to reimport the files because I have several hundred playlists with these files and it would be completely stupid to edit them all one at a time when all I need to do is to move them back to where iTunes thinks they should be. So where is that? The Windows media player has a column that displays file location. Why doesn't iTunes? (This is so stupid. It makes things -not just this- so much easier when you have the file location in the music list in your music player.)
    Is there a way to find out where iTunes thinks the missing files should be at?

    Chris CA wrote:
    How do I find out where iTunes thinks missing files are?
    The exclamation mark means ITunes doesn't think they are anywhere.
    If you right click - get info on a song then view the Info tab, you will see where iTunes last used it from.
    I'm not a newbie. I know quite a lot about iTunes. You sound like you don't though because if you did you would know that this is not true. If you "right click - get info on a song" (pressing cancel to the Locate popup) "then view the SUMMARY (not info) tab" you will see "Not Available" where the file location usually is. I wouldn't have asked this question if I hadn't gone through the steps already.
    Thanks for trying though. Next time, please try the advice before you give it.
    I add dozens of songs at a time to my library all the time and there is no Earthly way for me to constantly remember where they were before
    You should not have to remember anything about where they were.
    I agree.
    Are you always moving them around?
    When I install a new hard drive. Yes. I generally keep everything organized and I let iTunes keep the folder organized but several years ago I used windows media player to organize my media.
    Frankly I don't know HOW the recent songs/videos/etc. go missing. But some do. Maybe I accidentally move a folder without realizing it. Mistakes happen. Then I need to move it back but since I didn't know I did it in the first place I can't possibly be expected to remember where I moved it from.
    Do you have iTunes prefs -> Advanced Keep ITunes music folder organized ticked and Copy files to iTunes ... ticked?
    *OF COURSE!* Again, I'm not a newbie.
    I have several hundred playlists with these files
    Why would you have several hundred playlists?
    I don't mean to sound rude but you sound like an Apple fanboy. Are you trying to tell me how I should use my own program? The answer to the question is I am a salsa instructor/DJ and I am constantly adding songs and videos to my library. Every month I have various salsa events, classes and performances that I do. I use my iPhone for the music. I need to maintain the playlists because students/teachers/studios/clubs/bars/churches/etc. call me back and want a repeat of the great salsa night I gave them a year ago. Naturally my playlists are highly organized into folders. So, I still have them and I need them.
    Apple has its own ideas about how people should use its stuff but everyone is unique and our needs therefore are unique too. Apple doesn't realize this and still wants us to do things "the Apple way" even though "the Apple way" only works well for people who want their hand held through everything. This is why I say you sound like a fanboy. You don't know my situation and question if I need hundreds of playlists. I do.
    I just need an answer to the question.
    Thank you for your reply though. It gave me hope, for a time.

  • I would like to use GarageBand to remaster downloaded music files that are in iTunes.  Poorly mastered files keep clipping and damaging my speakers.  When I try to use an iTunes file as a new project, it greys out the iTunes songs so I can't select them.

    I would like to use GarageBand to remaster downloaded music files that are in iTunes.  Poorly mastered files keep clipping and damaging my speakers.  When I try to use an iTunes file as a new project, it greys out the iTunes songs so I can't select them.  Any ideas?

    As I said - look whether your original file is damaged or not. If not, I wouldn't change it and find out what in your system makes it sound like it's clipping.
    Good sound file, with volume maxed out. No need to change anything.
    The same song clipped - no chance to repair.

  • Suggestion: airtunes should be a system-wide "sound out" option.

    instead of limiting itunes to using the airtunes option. shouldn't it be made an option in the "sound out" control panel? that would make sense... it should be easy to do as well...
    cheers,
    pierre

    Hi Pierre,
    I believe the reason that its not a system wide option is that the sound is streamed to the Airtunes, and therefore there is a lag which would be problematic for watching movies, garageband or other apps which would require synching the sound to what you are doing or seeing on your computer.
    I have heard a product called airfoil, but have no personal experience with using it.
    Cheers
    Wynter

  • No Sound out- test one, two- Sound bars are lighting up but nothing coming out built in audio

    For some reason I can't get any sound out of premier pro. I haven't used it many times before but I'm sure I ahd audio when I did.
    I switched from doing compositing in After Effects to PPro because AE was chooking on a simple luma track matte using one video to matte/key another... so I find myself in PPro.
    Is there anything simple I could be missing which would explain why I'm not getting audio out of my Built-in speakers from Premier? iTunes kicking out the jams no probs.\ as was AE
    Strangly every time I start SoundFlowerBed it quits as soon as I leave it. Normally keeps a little flower icon in the menu bar (OS X) to access it and route it's audio bus (SoundFlower itself is a low-letency audio routing system extension) to various outputs.
    With SoundFlowerBed I can access OS X Audio Setup (as opposed to Sound Control panel)

    I found an uninstaller in Utilities and it has a cross thru it indicating not OS compatible. I dounble clicked and tells me it's a PPC app that can't be run (since I'm on 10.7.5 no rosetta for PPC). I'm not certain that relates to the actual SoundFlower that is running, it may just be a relic of auto-migration from a PPC MacPro.
    Are you taking guess Jim or do you know there are issues b/w the two softwares?
    I'm going to the Cycling74.com | Soundflower website now to investigate further.

  • IPod Touch 4th Gen - Install icon grayed out in iTunes

    I bought a 4th gen iPod Touch for the kids for Christmas.  Its running iOS 6.1.5, I loaded it up w/ games for the kids a couple weeks ago with no problems but now when I buy new games through iTunes and try to transfer over via iTunes, the Install button is grayed out in iTunes.  The Remove button works just fine so I can take apps off the iPod but can't install any new ones.  I also don't have an App Store icon on the iPod Touch any more and I'm 99% sure it used to be there.  The apps that are installed still play but the kids are getting tired of the same ones and I obviously didn't pay the money for 2 weeks of use.  Any idea what's going on??

    Sounds like the Restriction that prevents installing apps is set. Go to Settings>General>Restrictions and check/change. It is passcode protected.

  • I am trying to update my RSS via sound cloud to iTunes but having issues... please help

    I am trying to update my RSS via sound cloud to iTunes but having issues.
    I currently have my podcast working on iTunes but I have decided to change where I have them hosted.  I moved my podcasts over to Soundcloud and currently have the rss feed but I would like to update my iTunes podcast with this so that all my podcasts showing up on sound cloud will sync up and automatically update.
    here is my rss feed:
    feed://feeds.soundcloud.com/users/48458062-the-collective-podcast/tracks
    Podcast via Soundcloud:
    http://soundcloud.com/the-collective-podcast
    my podcast on iTunes:
    https://itunes.apple.com/us/podcast/the-collective-podcast/id662393388
    Any help would be greatly appreciated!
    Thanks!

    The feed in use by iTunes is http://thecollectivepodcast.podomatic.com/rss2.xml , not the one you list. It has one episode, whose media file URL is
    http://thecollectivepodcast.podomatic.com/enclosure/2013-06-14T16_06_53-07_00.mp 3
    Your feed at http://feeds.soundcloud.com/users/48458062-the-collective-podcast/tracks has no episodes.
    You will obviously need to get this sorted out before you can proceed. Once you have the soundcloud feed working properly you will need to add a special tag to the original feed in order to transfer the Store to using the new feed. The method is decribed here:
    http://www.wilmut.webspace.virginmedia.com/notes/podcast.html#move
    Please make sure you are completely clear about it before proceeding, and check that the new feed works by subscribing manually in iTunes before you try moving the Store to it.

  • I pre ordered a album and got songs then it came out so itunes sent me a confirmation and it said to go to available downloads and gave link so I did and it did nothing for me and when I went to the album I wanted it said it was purchased so how do I get

    I pre ordered a album and got songs then it came out so itunes sent me a confirmation and it said to go to available downloads and gave link so I did and it did nothing for me and when I went to the album I wanted it said it was purchased so how do I get my music and don't even see available downloads in the iTunes Store

    Check this link, http://www.apple.com/support/itunes/ and go to the contact page.
    Sorry, here you go https://ssl.apple.com/emea/support/itunes/contact.html
    Message was edited by: ChrisJ4203

  • When I connect my Mac Mini 2011 with Lion to a TV via HDMI and an earphone cable is plugged in, it´s not possible to choose sound out via hdmi, as opposed to connection via minidisplay port. Anybody knows how to fix this?

    When I connect my Mac Mini 2011 with Lion to a TV via HDMI and an earphone cable is plugged in, it´s not possible to choose sound out via hdmi, as opposed to connection via the minidisplay port. Anybody knows how to fix this?

    Was just on the phone with Apple about this.
    The solution was as follows for me anyway...
    Go to your Finder
    Choose the Go Menu
    Choose Computer
    Choose your Macintosh Hard Drive
    Choose your "Library" Folder
    Choose the "Preferences" Folder
    There should be a folder called "Audio"
    Move that whole folder to the trash
    Empty the Trash
    Restart from the Apple Menu
    When you are back up and running;
         Choose System Preferences from the Apple Menu
         Choose Sound
          In the output tab you should now be able to make the HDMI "Sticky"
          Enjoy your sound over HDMI and no more dirty knees or broken backs unplugging the desktop speakers!
    Mac Mini 2011 2.5Ghz 8 GB of RAM - Planar 17" VGA via display port adapter and Samsung 26" LCD TV via HDMI

  • Been sat here for the past 5 hours trying to figure out why itunes wont download, it says error and something to do with Microsoft? Help me please.. getting a bit bored?

    been sat here for the past 5 hours trying to figure out why itunes wont download, it says error and something to do with Microsoft version? Help me please.. getting a bit bored?

    i have this problem too
    my dad thinks its because itunes is getting overloaded

  • How can I find out which iTunes library my computer is using?

    I have a desktop Mac Mini at home that my wife uses and a MacBook Pro that I use at home and in the office.  I wanted to be able to access all the music we have on both machines from both machines, even when I am out and about and have no network connection for my MacBook Pro. So, I uploaded all the music we had on iTunes to Dropbox, and this now syncs on both computers.  So, whenever either of us adds music to iTunes, the songs are saved on both machines within the Music folder in Dropbox, which syncs in real time across both computers.  So far so good.
    However, what I am finding is that, when either of us adds new music to our respective iTunes, it only shows on the computer on which it's been added.  So, within a matter of weeks, our computers no longer show the same music in our respective iTunes windows, even though the music is present on both machines in the synchronised Dropbox folder.
    I realised that the computers must start using different iTunes library to each other when new songs are added to either machine.  So, I figured that, when we add music to one of the computers, if I pointed iTunes on the computer that has the less up-to-date music to the latest library that is being used by the computer with the more up-to-date music, this would ensure that both machines showed the same music in their repective iTunes windows.  The problem is that I cannot work out which iTunes library is being used by the computer with the more up-to-date music on it.  I know how to choose a different library when I open iTunes (hold down alt) but that doesn't help, because I all I want to do is to FIND OUT WHICH LIBRARY IS BEING USED BY ITUNES ON THE COMPUTER WITH THE MORE UP-TO-DATE MUSIC.  I simply can't find a way of getting iTunes to show me which library it is using, although this must be the simplest thing in the world. An additional issue is that I want to playlists we have created to appear on both machines - will that be the case if I point the less up-to-date iTunes (on my wife's Mac Mini) to the library of the more up-to-date iTunes (on my MacBook Pro), since my computer with the more up-to-date iTunes shows all the playlists, whereas my wife's doesn't?
    So, can anyone help?  Plus if anyone knows of any software that can automatically ensure that two different Macs both use the same and most up-to-date iTunes library and therefore always show the lastest music collection, whichever machine the music has been added to, that would be fantastic.  Thanks.

    You could have all the computers point to the same library but it can't be opened by more than one at any time.
    No answer for knowing which library is in use other than selecting it at startup.  This question gets asked here occasionally but I don't think it is a high-demand feature since most people have just one library.  I guess you could put in an empty playlist with the library name so you have an identifier.

  • I want to plug my apple tv into a projector but i want to break the sound out and plug this in to a sperate audio solution which has 2 phono's. Is there a lead that does this?

    I want to plg my apple tv in to a projector but i want to break the sound out to a seperate audio solution. Is there a lead that I can use? The sound system has 2 x phono connections?

    The sound can already be "broken out" by using the optiocal cable jack. That, of course, assumes your audio input is capable of optical inputs. If not, you might have alook into something like this: https://www.google.com/webhp?sourceid=chrome-instant&ion=1&espv=2&ie=UTF-8#q=opt ical+to+rca+converter&tbm=shop

Maybe you are looking for