Sound out of sync when capturing to External Hard Drive

I've been trying to capture my short film footage (5 - 60 min. mini dv tapes) on FCP without the audio getting WAY out of sync. All the footage is off. Any ideas? Here's some more info: I capture the whole 60 minutes of the tape at once. (And then I was gonna split it up later.) It all looks fine through the LCD monitor as it plays, but when I look at the footage after capturing, it's way off. I have a G-Raid, 500 gig ex. h/d that is empty. I have a PowerBook G4.
Can you capture it on your external h/d without this happening? Or do you have to capture on your internal? (which I believe, I don't have enough memory there.
Help, please, please, please.
- Michael

The best solution would be to use a DV capture utility and then import the resulting file(s) into final cut.
Aplle itself offers capture utilities, which can be found in the Developer Firewire SDK:
http://docs.info.apple.com/article.html?artnum=305924
You need a free Developer account and to download the SDK there. After installation you will find a new folder on your harddrive called "Developer"
There are several capture utilities in the program section of the SDK. You want to use the one called "VirtualDV". It´s very simple, but powerful though. It does capture without sync loss, compared to capturing via the Quicktime framework, like Final Cut and iMovie do. It simply grabs the raw DV stream coming from the Firewire interface.
After the capturing you have a Quicktime readable raw DV file, which easily can be imported to be worked with in any DV capable software.

Similar Messages

Canon HDXL1 Sound out of sync after capture in HD when shot at 24Frames

When shooting with the new Canon HDXL1 in HD with the frame rate set at 24Frames, the audio is way out of sync when captured in FCP using the apple Intermediate codec and HDV firewire. If I play it through the camera to a HD moniter via compnent cables, the sound is in sync. The lag only occurs when capturing in FCP. Any answers? I have been told that Apple may address this issue on their next FCP update. Am I doing something wrong?

The audio default for the Canon XLH1 for HD is 48khz.
In the HD 24F mode the camera records in 24fps progressive mode. During playback the signals are down converted to 60 fps interlaced using the 2:3 pulldown method.
While recording, if the HDV/DV terminal is set to HDV output, the output signal will be in 24 fps progressive. The signal output from the HD/SDI terminal and the component out terminal will be down-converted to 6ofps using the 2:3 pulldown method. Mayber I need to use tools>remove advanced pulldown in FCP on the clips?
Thanks for your reply

Is it possible to open a program when connecting an external hard drive?

Is it possible to open a program when connecting an external hard drive?
I have a external hard drive with an iphoto library. I just want to connect my drive and automatically see iphoto open! Possible?
I know there are some action scripts, am i right?

Ok, here are the steps to take. Doing this involves generating two scripts, the first of which will have the system monitor the attachment of a hard drive, and the second which will conditionally open iPhoto. To make these and set them up, perform the following steps (it is a little involved, but will get you the result you want):
Script 1: A launch agent to monitor attached hard drives
1. Open the Terminal utility in the /Applications/Utilities/ folder. Then copy and paste the following command into it and press Enter, which will open up an editor program in the Terminal:
pico ~/Library/LaunchAgents/iphotodrive.plist
2. Now copy and paste the following text to the Terminal window in its entirety so it is all entered into the Terminal editor:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
          <key>Label</key>
          <string>local.iPhotoDrive</string>
          <key>QueueDirectories</key>
          <array/>
          <key>WatchPaths</key>
          <array>
                    <string>/Volumes</string>
          </array>
          <key>ProgramArguments</key>
          <array>
                    <string>/Users/USERNAME/Library/iphotodrive.sh</string>
          </array>
</dict>
</plist>
3. Use the arrow keys to navigate your cursor down to the place where it says /Users/USERNAME/Library..., and change the text of "USERNAME" to be the same name as your account home folder. For example, my login name in OS X is "tkessler" so my home folder is also "tkessler," so for me this is what should go in place of "USERNAME" in the text above.
4. Now press Control-O to save the file, and then Control-X to exit the editor (use Control, and not the standard Command key here).
Script 2: A shell script to open iPhoto when your drive is attached
1. Type (or copy and paste) the following command in the same Terminal window to make the second script in the same editor:
pico ~/Library/iphotodrive.sh
2. Now copy and paste the following text into the Terminal editor:
#/bin/bash
if [ -d /Volumes/"IPHOTODRIVE" ]; then
        open -a iPhoto;
fi
3. Again use the arrow keys to navigate, and edit the text IPHOTODRIVE to be the exact name of the drive you would like to spur iPhoto to open. The name will be case-sensitive, and spaces are OK within the quotes.
4. Again save this file by pressing Control-O, then press Control-X to quit the editor.
5. Next ensure this new script can be run, so to do this now copy and paste the following command:
chmod +x ~/Library/iphotodrive.sh
Now to activate these scripts you can log out of your account and log back in, and they should work as expeted, and will launch iPhoto only when a drive named "IPHOTODRIVE" (or whatever you edited this entry to be) is attached to the system. This procedure will create two files at the following locations on your computer, so to undo it simply remove these two files followed by logging out and back in, and you should be good to go:
/Users/USERNAME/Library/iphotodrive.sh
/Users/USERNAME/Library/LaunchAgents/iphotodrive.plist
If you run into any problems, then write back here and we can figure out if there are any nuance details to cover for your setup.

I get the following error when formatting a external hard drive. Partition failed with the error: POSIX reports: The operation couldn't be completed. Cannot allocate memory

I get the following error when formatting a external hard drive.
Partition failed with the error:
POSIX reports: The operation couldn’t be completed. Cannot allocate memory
I have a Macbook pro 13" A1278. I purchased it around december 2010. I have a HHD 3.5" drive desktop select II 1.5TB. I purchased it around Febuary/March 2011 to use with my Macbook pro. I formatted it and moved all my files to there, I got it so my macbook's hard drive wouldn't brake and I lose everything on my macbook.
Is there any fixes?

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."

When adding an external hard drive, should you hook it up to your iMac or your Apple Extreme router?

When adding an external hard drive, should you connect it directly to your iMac or to your Apple Extreme router?

That depends on what you are using it for. The advantage of connecting it to the router is that you can share the drive over your home network and/or over the Internet. That can be convenient but drive access is performed at network speed - slower than when connected directly to the computer. If you need/want to share the drive, connect it to the router, otherwise connect it directly to the computer.

Why is the picture and sound out of sync when i download my videos from iphone 4s

Why is my picture and sound out of sync in my videos when I download them from my Iphone 4s?

please share your advice. maybe no-one else replied because they didn't have an answer? by solving the problem yourself, and then sharing that information, you can help many other users overcome the same problem. welcome to the helpers club!

Capturing to External Hard Drive

I am editing my video on a MacBook Pro with a 120GB hard drive which is not anywhere near big enough. However I have an external hard drive that is 500GB that I am trying to capture the video to. I set it up in the Final Cut system preferences but when I go to capture now it says allocating disk space and then freezes. I think the problem is that I am connecting to the drive via USB as opposed to firewire. But if Im importing video at the same time through the only firewire port how do I avoid this? Thanks.

Re: External HD ports: eject the drive, power off, switch the cable to the adjacent port, power up the drive then see if the computer recognises the drive. If it does both ports work. If it doesn't...
If ports are okay (it seems cables are fine as both camera and drive are currently recognised via firewire aren't they?). Shutdown laptop. power everything off and then power all back on and then startup. Make sure camera is in right mode and startup FCE.
If that doesn't work just out of curiosity you could open up iMovie and see if your camera is recognised through the HD there.
You could try connecting the camera directly via firewire to the computer and reminding us that it works that way (you were using USB earlier were you not?)
Keep us posted.
(ps I'm off to bed!)
M.

Finder crashes when accessing my external hard drive

I have a Seagate FreeAgent GoFlex 1TB external hard drive where I keep a lot of my extra data. Very recently, I can't pin-point exactly when, the hard drive has been causing Finder to crash, most of the time irreparably -- and by irreparably I mean it will crash and I'll try to relaunch it but it won't work, in fact it won't actually relaunch unless I then click the Finder icon (which had no dot under it), after which it will immediately launch into an "Application Not Responding" state.
The reason I believe it is the external hard drive is because I have two computers, both of which have the same problems when doing stuff with the hard drive, and neither have problems when the hard drive isn't plugged in.
Some weird things: I have been accessing an excel document on the drive and have been saving the document this entire time -- before I began to think that it was the hard drive causing these problems. It seems as though I could open that document and save it without any apparent problems. Same sort of thing when I used Ableton Live recently. I could access my sample library on the external drive through Live's browser and it would seem to work just fine. However, with Live, when I tried to save a project it would immediately crash Live (presumably because Live is trying to save via Finder or something?). I can't remember if Finder would subsequently crash or not, but I remember having terrible issues with Finder crashing around the times I would be using Live and trying to save.
I tried doing a Repair Disk on the external through Disk Utility, but after it was showing only the stripey progress bar down at the bottom and only saying "Verifying and Reparing Disk," for a little while I stopped it and tried to quit Disk Utility, only to have Disk Utility crash and now Finder crash as well.
Another couple of things to note. Finder is not able to copy something to or from the external, or move something from the external to the trash. It will be stuck at 0 percent progress and if I press the x it will say "Stopping" and never go away. However when I do that and then just unplug my external I immediatley get a "Disk removed improperly" dialog and Finder will work again right away.

Interesting. What avout your login items in your Accounts preferences?
To save everybody downloading that stuff:
~/Library/LaunchAgents
com.adobe.AAM.Updater-1.0.plist
com.adobe.ARM.df0ab5bbe6f698196fcc21e3c1e66dcb758bd911f4d637272d9d8109.plist
com.apple.AddressBook.ScheduledSync.PHXCardDAVSource.F8FFDCC1-8936-45DE-BF21-BF3 C08DF0EF9.plist
[email protected]
com.divx.agent.postinstall.plist
com.valvesoftware.steamclean.plist
/Library/LaunchAgents
com.adobe.AAM.Updater-1.0.plist
com.google.keystone.agent.plist
com.m-audio.fasttrackpro.helper.plist
com.seagate.SeagateStorageGauge.plist
/Library/LaunchDaemons
com.adobe.SwitchBoard.plist
com.google.keystone.daemon.plist
waves.SoundGrid.RawEthernetHelperTool.plist
com.apple.remotepairtool.plist
com.microsoft.office.licensing.helper.plist
/Library/StartupItems
ProTec6
kexts
com.Cycling74.driver.Soundflower(1.5.2)
com.maudio.usb.fasttrackpro.driver(1.8.1)
Is the goflex a usb-attached enclosure?
Remove maudio, specifically that com.maudio.usb.fasttrackpro.driver. If you just move that out of /System/Library/Extensions (or if there is an installer) you need to reboot after adding/deleting kext's.
If no software was installed by you then somehow that external got that com.seagate.SeagateStorageGauge.plist installed in your /Library/LaunchAgents. If the maudio removal doesn't change anything then this segat launchagent is the next to go.

My MacBook Air is running out of storage. Will an external hard drive work for me?

Good afternoon, Apple support forums! I recently made a BootCamp partition, and now my MacBook Air is running out of storage (about 13 GB left), and I realize that I cannot expand the storage on my Macbook Air without some DIY technical work. I looked into alternatives and came onto external hard drives (I'm looking at the LaCie Porsche Design P'9223 USB 3.0 Mobile Hard Drive - 2 TB, but this question is for external hard drives in general). I was wondering, just in case, if I could use it not for backup (as I already have an Apple AirPort Time Capsule) but as added on storage for my Mac. Also, would I have to keep the external hard drive plugged into my Mac 24/7 to have access to the files stored on it? Thanks in advance for any help!!

1. Yes, you can.
2. You only need to have it plugged in when you're accessing data on it.
(119316)

When importing from external hard drive, photos appear as thumbnail size. How do you edit. Working on imac- snow leopard

I have photos on an external hard drive. When I try to import them to iphotos they appear as a thumbnail (?), small in size. How is the photo restored to its original image. If I try to print, it comes out pixelated. I have many photos on hard drive and would like to restore to original size. Using Leopard OS

and the only time I see the pixellation problem is when the original photo's file size is small.
What did you expect? Of course if the file size is small it won't print well. There isn't enough data to create a reasonable quality print.
Web Photos are - typically - very heavily compressed to speed up downloading. I've seen Facebook photos - for instance - lose 90% of their file size after being "processed". There is no way that a 20kb file is going to print well at any size greater than a postage stamp.
So, basically, the problem you have is the photos you are importing, I'm afriad.
Regards
TD

Can't open video files when transferred to external hard drive, but can preview them?

I'm trying to clean up the disk space on my Mac because I have too many HD files. However, when I copied them onto my external hard drive, and tried to open them there, I can't. However, I can "preview" the files. Is it safe to erase my hard disk? Or has something gone wrong?
Thanks.

iMovie will only recognize drives that are formatted as Mac OS Extended (journaled), not FAT32. This is because of an architectural limitation of FAT32 which does not allow files sizes of 4GB or larger. Video can quickly reach this size.
You can either get a new drive and format it, or you can reformat your current drive. If you reformat your current drive, it will erase all data that is currently on it. Shout out if you need detailed instructions for the reformatting.

Files vanish when copying to external hard drive

Just purchased an iMac 24" and struggling with files disappearing.
We use a laCie external hard drive with firewire connection. Normally we have no trouble just dragging files over to the lacie drive. But twice in the past week the files we drag over just disappear - poof - gone fom the iMac and the laCie. Never happened with the other Macs.
Any ideas?

Lacie has had problems with several of their drives and Leopard. Expecially the 160 and 400 drives and Porche models.
I'd check their site to see if there is a firmware update that should have been applied to the drive.
The MyBook drives are also going through similar issues and Western Digital considers the problem fixed with their drives by installing a new firmware update that only runs on a windows machine.
I've heard similar problems with Buffalo devices.
These kinds of problems all appear to be caused by Leopard, yet many of the manufacturers are putting out firmware updates, like maybe they didn't follow all of the rules in the transfer protocols they use? Commands like "FSMoveObject and FSCopyObject" run and transfers files since late versions of 10.4. The drives in question, seem to send a "copy complete" code when it isn't actually complete and the Mac deletes the file.
I have not heard of this happening with Hitachi drives.

How to use itunes, and sync ipod from an external hard drive

All of my music files are on my external hard drive. I moved my itunes media folder to my external hard drive. I have 150 gig of music and only 25 gig free on my macbook, so I'd like to put it all on my ipod without putting it on my computer, as there isn't enough memory. Every time I try to move the music from my external hd to itunes it starts adding music to my computer's internal hard drive- i thought this would be solved by having my media library in my external hd but it isn't I'm not sure how to get around this. I've already followed the directions here: http://support.apple.com/kb/HT1449 but it didn't accomplish what I wanted: For all my music to show up in itunes, and be able to sync my ipod to it, without the music being on my computer's internal hd. I have a macbook.

Make sure the copy to iTunes media folder is unchecked.

When using as External Hard Drive: can I install programs?

Is it possible to install a program to the iPod when it's being used an external hard drive? I just thought of this, because I was wondering if it would help me conserve disk space. So long as I kept it connected to the computer, would the program still work?

Possibly, but will reduce space usable for media playable by iPod. If it will be for use as external hard drive exclusively there shouldn't be an issue. You could get higher capacity discs in external enclosures for about the same size though.

Syncing issues with an external hard drive

Hello, having a syncing issue with my iTunes right now. I have my library set up on an external hard drive because there isn't anymore space on my computer for my music, and the other day my roommate unplugged the external to ironically sync my ipod. There was a syncing issue of course but it's happened before so I wasn't worried, but now iTunes can't find a few hundred songs in my library still. I've restarted iTunes and replugged in my hard drive multiple times and restarted my computer and consolidated my library as well but nothing's working. All my music is still on my external but iTunes can't read some of the songs for some reason. Any suggestions at this point? I'm lost. Thanks.

Welcome to AD!
What drive letter did the exHD use before this happened? Do you know?
Windows can change hard drive letters for USB devices without telling you.
Use Windows Disk Management to change the drive letter back to what it was before your roomie created this havoc. Then start itunes, and tell your roomie it's their turn to I dunno, clean the toilet, or something useful.

Sound out of sync when capturing to External Hard Drive

Similar Messages

Maybe you are looking for