Sound Output from Logic Express 8 with new USB Guitar Pedal

Hello, everyone. I am guitarist. I have just bought an effects pedal from Vox called the Tonelab ST, which has a USB out. When I connect it to my G5, Logic sees it okay, and selects it as the audio device in the Preferences pane. The problem is that it shuts off my sound output and reroutes it through the USB pedal. If I hook the pedal up to my amp, I hear both. I tried adjusting the sound output through the System Preferences, but that is okay. If I start a different program (like iTunes) it plays through my system like normal. Does anyone have any suggestions?

You need some pro help. I'm only a stand-in while others aren't addressing your difficulties. I would suggest poring over the manual.
Some thoughts: I have seen demos of folks using multiple output options and switching among them. Me, i'm only using one input (my mixer) and one output (my mixer). I run my guitar into the mixer to record while running other tracks out to the mixer to monitor. When I've recorded a part I play back the entire thing through the mixer. I used a Firewire Solo (which I do not recommend) as the analog/digital converter between the mixer and computer. Now I'm using a little USB gizmo that came with my new Behringer mixer and i address is as "USB Audio Codec" in Logic.
So in Prefereces > Devices > Core Audio I have it set to "USB Audio Code" and this functions as BOTH my input and output. Well: How to get multiple outputs. I think you'll have to go to the part in the manual that addresses "Environments" and add another output mechanism, specificall distinguishing between your preferred output options.
In your above post you say you record something and it "sounds great". How are you monitoring this to conclude how it sounds? Outside of Logic? I asked whether you were routing your playback audio (of your "input 2") and you didn't say. It is routing to "Output 1-2". Does "Output 1-2" in the mixer display bounce up and down indicating output activity? Does the "Master" fader in the mixer display bounce indicating output activity?
-- Gerry

Similar Messages

No Sound Output from Logic Pro 9

I recorded a 4-track performance in Logic Pro 9, but when I play it back the displays show that the sound is there but no sound comes out of my computer. Other files that I have recorded in Logic Pro 9 play fine. Any Suggestions?
My Preferences Core Audio is set to Built-in Output, with an I/O Buffer Size of 256, 24-Bit Recording, Unversal Track Mode and Software Monitoring. Audio Settings specify Automatic Management of Channel Strip Objects, Automatic Naming of Channel Strip Objects and Playback Pre-roll, with a sample rate of 44.100 kHz. My Apple Sounds System Preferences are set for Built-In/Internal Speakers, the output volume is all the way up, and the mute is off. I cannot figure out what is keeping the sound from coming out. Again, any ideas would be appreciated...

Here are some things to try.
You said you have core audio set to built in outout , yet you have an Apogee ensemble. Can you hear audio coming from the computer output?
Can you play other audio files from this session?
In the lower right hand corner of Logic in the arrange window there is a volume control, did you turn that down without realizing it?
Can you hear audio from another Logic Session?
Can you hear Audio From Itunes?

The synth pad sound Warm Pad has changed after upgrading from Logic Express 7 to Logic Studio

Hello!
I have composed a lot of songs over the years using Logic Express 7, and my favourite synth pad sound there was a sound called Warm Pad (from the EXS24 Sampler).
A half a year ago I upgraded to Logic Studio, mainly because I needed WaveBurner. Happily, all my songs sounded exactly the same after the upgrade, except from 1 sound: The synth pad sound Warm Pad. It still got the same name and location, but the sound was replaced with a very sharp and much more distinct sound (not warm at all, in my ears at least).
I have tried to replace it with different synth pad sounds from the EXS24 Sampler, and the one I find to come most close to the old Warm Pad from Logic Express, is a synth pad sound called Pad 1. Still, I don’t think it sound exactly the same.
So, in order to finish all my songs and make an album, I ask you for help:
1. Do you know how I can get EXACTLY the same sound as the old Warm Pad Logic Express, with my new Logic Studio?
2. Have you experienced the same with sounds, after upgrading from one Logic version to a newer one? And what have you done to find back to the old sounds?
I will be VERY thankful for help, because I am not a genius in the mysterious (but yet exiting) world of synthesizer synthesis.
Best regards,
Asle
Composer, guitarist and entrepreneur
Norway

I have the boxed version of logic studio.
When you install, if you pick the "ad hoc" installation you can add the logic7 patches to your existing patches.
I think running installation again you should be able to install just that.

Upgrade from Logic Express to the new Mac App Store Logic Pro?

Hey there,
So I recently bought Logic Express, thinking that sometime in the future I might want to upgrade to Logic Studio. Today Apple announced that Logic Pro is available in the Mac App Store for $200! Is there a way to upgrade from Logic Express to this version?
Thanks,
Alan

I´m from Mexico I Saved Money for one year (2010) only for buy "Logic Express" and 2011 I´ve saved money again for Up to Logic Pro. I dont want to turn me a piracy
Complementos de efectos disponibles sólo con Logic Studio
            Space Designer (reverberación por convolución)
            Delay Designer
            Match EQ
            Linear Phase EQ
            Limitador adaptivo
            Multímetro
            Multipressor (Logic Express incluye únicamente una versión predefinida)
            Loopback (sólo disponible desde MainStage)
            Postprocesador binaural
            Downmixer
            Ganancia multicanal
            Compresor surround

Master volume adjustments aren't translating when i bounce projects from Logic Express, any tips?

hi folks!
whenever i bounce a track from Logic Express it's always significantly quieter than any other aiff, mp3 or wave file i have, including those that i have bounced from garageband. Even if i crank the 'master' volume in the mixing window, it sounds loud in Logic, but the bounced file is a big 'wanh wanh' and has absolutely no change in volume.
i must be doing something stupid.
is there another place i can adjust the master volume that the bounce will read?
does anyone else have this problem?
i'm pulling out my hair.
any suggestions would be very welcome!
thank you!

Hi,
first of all: The "Master" Fader is for trimming your mix to your monitors only. The bounce will be taken from the "stereo output" channel, so look there for the correct volume.
Now for the loudness issue: Garageband has kind of a built in foolproof bouncing. Normally, you would have to adjust not only volume to be an loud as you wish, but you have to insert some plugins into the stereo output channel to ensure that the signal doesn't get any louder than 0db, because this will produce clipping and with raising volume, distort the sound. But:
You can raise the volume if you insert the LIMITER plugin as very last plugin into the stereo output channel. Make sure it is the last plugin so there are no changes to loudness after it, not even an eq!
Any change of loudness before the limiter will be limited (hence the name) to a maximum of 0db by default (you can change the value - i use -0.1 db just to be sure.) while the softer parts of the music are being raised in loudness. If you listen to it, you'll notice the whole song is louder without distorting. Of course, if you overdo it, you'll hear the squished dynamics. Experiment!
Garageband seems to have a built in preset to perform these tasks fairly well. In Logic, you have the freedom of using or not using these settings and to customize them, which is quite normal for a pro tool.
Fox

Sound output to Airport Express horrible except through iTunes Airplay

I've had an Airport Express for 2 or so months now, and I use it for both wifi routing as well as its Airplay functionality, wired into my stereo. I've used it with Airplay directly from iTunes as well as setting the system sound output on my Mac to go over to the Airport Express.
As of today, only the Airplay over iTunes works without issue. When I go to the system sound preferences and select the Airport Express, I hear a very loud pop, and all output is muffled and highly distorted. If iTunes is playing, that sounds bad too. However, with the system sound prefs set to internal speakers and ONLY iTunes set to Airplay, it sounds fine. This is not good at all for me, as I often send audio from Youtube and other streaming sites to Airport Express to play on my stereo.
How can I get sound output to Airport Express from the sound preferences to play nice again?
PS, I have the identical issue with Apple TV, though I don't use it regularly for Airplay. System output to Apple TV is terrible, iTunes Airplay to it is fine, and the audio from content on Apple TV is fine.

Is there any way to output any sound from a computer to Airport Express, not just iTunes?
Yes, check out Rogue Amoeba's AirFoil.

Sound output from other user accounts

It used to be that I would hear sounds from other logged-in user accounts; I'd hear my wife's new mail arrival sound, I'd hear her Skype ringing when calls were coming in, etc. I also used to be able to play iTunes in one account, fast-user-switch to another, and the music would still play.
This has all gone away recently. I'm not exactly sure but I think it coincided with the 10.4.4 update.
This is a big concern because my wife was used to hearing her incoming Skype calls ringing when I was using the Mac, but now she misses all her calls if someone else is logged in!
I haven't found any other mention of this in any forum. Is this just me having this problem? Any way I can fix it?

Okay, I just got off the phone with Apple support and they say that sound outputting from other user accounts was a "bug" that has now been "fixed." They said that this was patched sometime between the 10.4.3 and 10.4.4 updates. I'm surprised to hear that you are having this problem in 10.4.2 because I'm sure it worked for me under 10.4.3 at some point. None of the security updates released under either 10.4.3 or 10.4.4 make any mention of this patch.
Apple support says that there's no preference for this setting and we've just got to live with it now.
This is so irritating! I've got my Skype ring tone, she's got hers, and we'd hear it ringing and know who it was for no matter who was logged in. Now that functionality is busted, and when one of us is logged in the other misses all the calls, and if one of my kids is logged in then both of us miss our calls! I can't believe Apple considers this "bug" to be "fixed".
There's got to be a way around this; maybe by using the "defaults write" command or something? That command sets a lot of preferences that Apple claims are not user-settable.
eMac Mac OS X (10.4.4)

Logic Pro Upgrade from Logic Express 8 + Lion. Please help

I have bought a new mac with lion operating system after my previous mac was damaged beyond repair, however i am running a logic pro 9 upgrade from logic express 8. I have been told that logic 8 doesnt work on lion, but i need to install it before i can install my upgrade to logic 9. Can someone help??

I believe you just need the serial and not necassirly the installation of 8 on your system.

Logic Express with MBox

Can someone please help.Can I use Logic Express with an MBox and if so how.

Hey Roma,
welcome to the forum!
Assumming you had the drivers installed, (in Logic) go to the audio menu>audio hardware & drivers>Driver (change from built in audio to Digidesign HW (MBox), Relaunch, that's it.
((Click on (say) audio 1 (to select track) Press R to arm it and you shoud now have sound level on metters. Don't forget the I/O in logic is audio 1 = input 1, audio 2 = input 2, audio 3 = input 1, audio 4 = input 2 and so on (by default))
Kiddly regards,
Jorge

No sound output from iPod classic

I have an iPod classic (5th generation). Suddenly, I have no sound output from earphones, iHome, speakers or AUX. Reset did not fix the issue and I have not done a restore. I saw something referring to a "logic board" issue so thinking there is a hardware issue. Any thougths?

A complete restore of the device in iTunes would rule out any sort of software error/glitch or data corruption on the device. So if you haven't done that yet, I would go ahead and do so now.
Restoring iPod to factory settings
And if the problem still continues, it's likely hardware related with the iPod's logic board as you have already noted.
B-rock

What are the characteristics of the sound output from the speaker iPad3?

What are the characteristics of the sound output from the speaker iPad3?

man -s4 proc
or
http://docs.sun.com/app/docs/doc/817-0683/6mgff29c4?q=procfs&a=view
Its a virual directory structure with a directory per process. These per process directories contain more directories and files that supply detailed information on that process eg per open file information.
Access to the per process directories is controlled by checking the credentials of the accessing process against the credentials of the
process whose procfs directory is being accessed.
tim

No sound output from dock connector or headphones but speaker is fine

I've got a 3GS which I've had since October.
Recently, there has been no sound output from the headphone socket - or rather, what does come out is very strange, sounding almost electronically distorted.
I thought that maybe the headphone jack was broken, but now I've found out that the same thing can be heard through a dock when the iPod is connected this way.
I'm fairly sure the dock connector is still fine as the phone charges and can be controlled by the dock etc
Most of the discussions I've found relate to sound not coming from the speaker on the phone, but this is absolutely fine.
Any ideas?

Hi, and welcome to Apple Discussions.
Have you tried resetting the PMU?
I'm not optimistic that this will help any more than the procedures you've already tried, but it won't hurt to try.
Do you still have your OS 9 installation? If so, try booting into OS 9 and see if the problems with the audio are happening there, too. If so, you can bet it's a hardware problem.
How big is your hard drive and how much space remains available on it? If you don't have your OS 9 installation in order to check out whether it's a hardware problem and you have enough available hard drive space, you may want to try an Archive and Install of the OS in order to make sure it isn't an OS X system-wide problem. If that doesn't do it, you could back up your hard drive and restore your software.
All of this may just be spinning your wheels, but it's all stuff you can try before shelling out a lot of money for repairs.

Lower than expected sound output from A100

Hi.
I have recently bought a Satellite A100 PSAA9E and have been pretty disappointed with the low sound output from it.
It's currently set to the highest volume level and is nowhere near the level I would expect.
Is this normal for this machine? All advice appreciated.
Thanks.

Hi
Well, its not easy to say what a low level is because its your own perception.
You know that the notebook speakers are not very powerful speakers because of the size and you can not compare it with other speakers.
But nevertheless; did you check also the settings in the control panel -- Sound and Audio devices?
There you can set the different sound controls to max. Maybe then you will notice a difference.

Upgrading from Logic Express 7.0 to 7.1 doesn't work

When I try to upgrade from Logic Express 7.0.1 to LE 7.1 I get an error message saying the installed version is a later version than the upgrade I'm trying to apply.
I have upgraded from OS X.3.6 to X.4.0 since installing LE 7.0.1.
Any clues about what's going on with this time-warp problem?

This is exactly the same problem I have had, despite down loading several times (just in case), and even using a different machine (again, just in case). Needless to say, the query I posted on the Apple Logic help site has not been responded to!
Fortunately, Logic Express still works but it would be nice to be running the latest (functioning) version

Can I put ALL the sound output from my iMac through Airport?

Just got Airport Express, and managed to install it very quickly on my existing Belkin network. Just don't forget the $ before your WEP key.
Does anyone know if its possible to put ALL the sound output from my iMac through to Airport, rather than just iTunes? So internet radio, streaming videos etc?

Thanks matey - that's just what I was after.
Not sure if that will also let me put my iMac's system sounds through my HiFi - probably not - but then who in their right mind could possibly want to...?
(Be nice if you could though)

Sound Output from Logic Express 8 with new USB Guitar Pedal

Similar Messages

Maybe you are looking for