Sound Output - Internal Speaker and Headphone Jack?

I just installed my new iMac, which replaced my Mac Mini. I hook my Mac to my stereo via the headphone jack for playing iTunes. But most of the time I don't have the stereo on.
is there a way to keep the headphone jack plugged in and still have audio come out the internal speaker? Basically send audio output to both the internal speaker and the headphone jack at the same time?
On the Mac Mini this wasn't an issue because I had a splitter that ran from the mini to my monitor speakers and to my stereo.
Thanks!

Hi, you can get the internals to give notice of emails & actions..externals for any other sound..
Sadly your wishes on this matter will not come to fruition...L

Similar Messages

  • My MacBook Pro with Lion 10.7.2, only audio on the headset, and speaker mute. With Windows, the audio works in speaker and headphone jack. What is the problem? What's the solution?

    My MacBook Pro with Lion 10.7.2, only audio on the headset, and speaker mute. With Windows, the audio works in speaker and headphone jack. What is the problem? What's the solution?

    There is probably a red light on inside your headphone port, indicating that the analog/digital switch in there is stuck in the digital position. Insert a headphone plug and wigle it around, especially in the horizontal plane, as you insert and remove it several times. This will usually unstick the switch and restore normal operation. If it doesn't, the machine will need to be repaired.
    This has been a fairly common problem, but in most cases it is easily cured as described above.

  • No sound from audio speaker or headphone jack

    Hello all i bought a HP Probook 4535s from a friend and im not getting any sound from the speakers or headphone jacks. I have flashed the BIOS to the F.41 and this didin't fix the problem. I also deactivated speakers in the BIO settings and re enabled them and this still didn't fix the job. I also replaced the speakers themselfs. Any ideas would be appriciated Thanks

    Hi @cblake118 ,
    I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can click here for the link.
    http://h30499.www3.hp.com/hpeb/
    I work for HP

  • No sound from internal speakers or headphone jack

    HP 15 notebook PC
    windows 8.1 64-bit
    not getting any sound from internal speakers at all. no sound from headphone jack. was working fine yesterday. updates to drivers are good. i can see sound signal in the speaker bar. please help.

    Hi,
    Can you post back with the full Model No. and Product No. of your Hp 15 series notebook - see Here for a guide on locating this information.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Back to back scratch noises from speaker and headphone jack, very faint

    I'm having a headphone/speaker issue, but it is very difficult to describe. When I use my computer, the speakers or headphones (if plugged in) will occasionally emit two quick scratchy noises back to back. The speakers and headphones work great, but I can't figure out what the noises are. They sound kinda like if you were to gently scratch the macbook pro casing with your fingernail. Any ideas as to what can cause it to happen?

    it seems that m1r3k found a very good workaround, at least for the Mid 2010 Mac mini models (that I'm using right now). I don't know if it works also with more recent Mac mini models.
    Re: After upgrading to lion, cant select HDMI sound setting
    Open Audio MIDI Setup.app in /Applications/Utility, click the + (plus) button in the bottom left corner of the window and choose "Create Multi-Output Device". In the new device settings tick the HDMI "Use" checkbox and you're done. Simply go to the usual System Preferences Audio panel and choose the newly created device, without the need to unplug the audio cable from the back of the Mac mini. You can also name the new audio device as you want.
    NOTE:
    This is only a workaround for a deliberate choice made by Apple on OS X Lion 10.7.2 and beyond:
    Mac mini: About HDMI audio and headphones
    Please let Apple know (here or here) how this has made things unnecessary awkward for users and needs to be fixed (these forums don't count, they are not read by Apple's employees)!

  • No sound in internal speakers and headphones

    I am having problems with my sound. There is no sound through both headphones and internal speakers. I have tried using the Audio MIDI setup, and still no luck. In MIDI it says headphones and internal speakers when I plug and unplug the headphones. If there are any solutions or any helpful threads that I have over looked please let me know thank you.

    Hi, and a warm welcome to the forums & Macs!
    Are there headphines plugged in that don't work?
    If no headphones, but it says that is a choice, then something is preventing the headphone jack from closong likely, might carefully use a tooth pic to gently poke around in it, or use a headphones to test.

  • Speaker and headphone jack problem

    I have had my pavilion dv6 for about a year n it hasn't given me any problems till of late..my pc speakers don't work when I remove my headphones from the jack so the sound only works when I put in the headphones..
    Pliz help me out!!!

    There is probably a red light on inside your headphone port, indicating that the analog/digital switch in there is stuck in the digital position. Insert a headphone plug and wigle it around, especially in the horizontal plane, as you insert and remove it several times. This will usually unstick the switch and restore normal operation. If it doesn't, the machine will need to be repaired.
    This has been a fairly common problem, but in most cases it is easily cured as described above.

  • HP 2000 laptop audio stopped working- internal speakers and headphone jack

    FOr the past few days the audio/speakers to my laptop have been going off, and then back on after a bit.Today I was in the middle of watching amovie when it stopped again, and everything Ive tried so far hasn't worked (going to restart netxt) . I tried plugging in my earbuds but the audio jack isn't working. Im also getting the Smos 502 error, and Im not sure if they're connected. I have the HP 2000 model C2N25UA#ABA

    I was wrong - I did upgrade to a 3 yr warranty (had forgotten about this) so hopefully it's covered!
    Thanks for having me double check!

  • Speaker and audio jack is not working

    My laptop speaker and headphone jack is not working.So am not able listen anything on laptop.Please give me a solution on it.

    Hi  ,
    Thank you for visiting the HP Forums! A great place where you can find solutions for your issues with help from the community!
    I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP Pavilion g series Notebook and issues with the sound. Here is a link to help troubleshoot issues with the sound. Please note remove any and all USB devices. Disconnect all non-essential devices and headphones, as these could cause some issues. Here is an automated tool for troubleshooting Windows 7. It has a built in Audio repair built into it. I hope this helps with the sound. Thanks.

  • Sound on MacBookPro stopped on internal speaker and when using earphones

    Sound on MacBookPro stopped on internal speaker and when using earphones.  I re-booted and tried again.  No luck.

    There are many possible causes for this issue. Take each of the following steps that you haven't already tried. Some may not apply to your model. Back up all data before making any changes.
    1. Start with the steps recommended in this support article. Don't skip any of the steps. It's the starting point for further efforts to solve the problem.
    2. Run Software Update and make sure you have a fully up-to-date installation of OS X.
    3. If you've installed an application called "Memory Clean" or any other third-party software that is supposed to "clean" or "purge" memory automatically, remove it according to the developer's instructions and restart. You should do that even if the software is not causing the problem, because it's useless.
    4. Other third-party software that has been reported to interfere with sound output includes "Boom" and "Samsung Kies." If applicable, uninstall according to the developer's instructions (not by dragging something to the Trash.)
    5. If an AirPlay device is selected for sound output from iTunes (or from other applications via third-party software such as "Airfoil"), deselect it.
    6. Launch the application "Audio MIDI Setup" by entering the first few letters of its name in a Spotlight search and selecting it in the results (it should be at the top.) Select Built-in Output from the list on the left. If the Mute boxes are checked, uncheck them.
    7. If a red light is visible in the audio-out port when sound should be playing, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a mini-stereo jack of the proper size. Inserting any kind of tool in the port may cause damage that won't be covered by the warranty.
    If there's no red light, the switch may still be stuck in the headphone position. Try to free it the same way.
    8. Disconnect all wired peripherals except keyboard and mouse, if applicable. If more than one display is connected, disconnect all extra ones. Restart and test.
    9. If you have a MacBook Air, turn off Bluetooth and restart.
    10. Start up in safe mode. Don't log in; just restart as usual when the login screen appears. When you do, make sure the words "Safe Boot" do notappear in the login screen. If they do, the system is still in safe mode and sound won't work.
    11. Reset the NVRAM.
    12. Reset the SMC.
    13. Triple-click anywhere in the line below on this page to select it:
    /Library/Preferences/Audio
    Right-click or control-click the highlighted line and select
              Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Restart the computer and empty the Trash. Recreate your settings in the Sound preference pane.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
    14. Reinstall OS X after backing up all data.
    15. Make a "Genius" appointment at an Apple Store.

  • Crackly Sound on L755 Laptop, no headphone jack output

    I have a L755 - S5366 laptop.   Windows 7 Home Premium.    
    Crackly sound comes from onboard speakers when using internet explorer or any of the "TEST" functions located in the Sound properties dialog boxes.  When playing YouTube, no sound at all.  Under all of these circumstances, there is no sound at all through the headphone jack.  Clicking the volume control, the little graphic that looks like an equalizer, shows sound being processed.   System shows all sound related devices and drivers to be enabled and working. 
    I have tried resetting BIOS settings back to factory defaults, restored windows to an earlier known working state, downloaded the most recent CONEXTANT audio driver from the Toshiba website.  Same symptoms persist. 
    Any other ideas of what to try, or am I looking at a costly hardware fix ?
    I should mention, my daughter spilled a tiny amount of water on the laptop and it hit in the area of one of the speakers.  The laptop was immediately powered down, battery removed and placed upside down in a tent-like position to dry it out.
    Thanks in advance ....

    You've tried everything I would normally suggest. If you're sure it was working at the time the restore point was made, then it does sound like hardware failure. You could know for sure by performing a full system recovery. If the problem persists a system recovery, it requires servicing.
    - Peter

  • I've updated my ipad to iso7 now the sound is distorted through the speaker and headphones, it is unusable! Is anyone else having this problem?

    I've updated my ipad to iso7 now the sound is distorted through the speaker and headphones, it is unusable! I wouldn't dare to update my iphone. Is anyone else having this problem? Can't seem to find any fixes online?

    A reset should fix it:
    Double click the Home button. Slide up with one finger on ALL your apps to close them.
    Then, Press the Sleep/Wake button + Home button and hold 15 seconds or until you see the Apple logo.
    This will reset your device without erasing data, apps or settings.

  • I can't hear my phone calls unless I put it on speaker. Tried cleaning by blowing on earpiece and headphone jack and pushing near front camera and earpiece speaker...no luck. HELP!

    I can't hear my phone calls unless I put it on speaker. Tried cleaning by blowing on earpiece and headphone jack and pushing near front camera and earpiece speaker...no luck. HELP!

    If you've tried everything mentioned you probably have a failed earpiece. One option is to get a BlueTooth headset and use it for all calls. It will be cheaper than the $199 out-of-warranty replacement price from Apple (if it's still in warranty or AppleCare it will be free). Good BT headsets can be had for around $40. And it will hold you over until the Next New Thing from Apple is available

  • Both Portege R700 speaker and Headphone makes sound

    Hi,
    My name is Anbu, I am using Portege R700 Series. I am facing a strange problem
    When i am using head phone for listening (I am plugging only speaker pin - Green colour), it works properly i.e i am hearing sound from head phone only.
    If I *plug both Mic & speaker pin* of the headphone (Both Red & green colour pin) into the respective slots, both *laptop speaker and headphone speaker makes sound.* Ideally only +head phone should work, not laptop speaker+
    Help me in finding the what is the problem behind this & how to resolve
    Regards
    ANBU

    Hi mate
    Please check the settings in the +control panel -> sound -> recording tab+
    Click right and mark the options: enable hidden devices and enable disabled devices
    Then you should be able to get the properties of mic and stereo mix
    Play around with all the available options.
    <img src='http://img97.imageshack.us/img97/9074/captureyeb.png' width='550px'>

  • Sound is playing both on speaker and headphone

    I have HP ENVY 15-j048tx Notebook PC. when attach heaphone to my laptop the sound is playing both on speaker and headphone. How to solve this please help.
    Thank you.

    Hello Dev2810,
    Welcome to the HP Forums!
    I understand the notebook produces sound from both headphones and speakers. I will do my best to assist you! The only troubleshooting I could suggest in this thread: Headphones plugged in, but speakers are still playing sound
    I provided these steps a while ago I noticed it resolved all instances of this issue, when done properly. Please try the steps and let me know what happens. Thanks!
    Mario
    I worked on behalf of HP.

Maybe you are looking for

  • MBP freezes after 10.4.11 and I can't get through to AppleCare

    This is beyond ridiculous. Since applying the 10.4.11 update, my MBP always locks up after waking from sleep. There has been no exception since updating. I kept it turned off for about 24 hours, then used it all afternoon without letting it sleep and

  • Can't install Forms and Report whith Redhart 7.2

    I use oracle 8.7.1. When I try to install Forms and Report I get this message UT60 is not available Why

  • String Field rendering as Number Field in CR Basic for VS2008

    I recently migrated from CR for VS2005 to CR Basic for VS2008 and am creating my first report using CR 2008. The SQL result set returns rows containing strings (nvarchar), integers and decimal (7,2) fields. The report is getting all rows in the resul

  • Table S013 not using INFNR field

    I can't create unique records from the same vendor on the same day because INFNR is the only key field that would uniquely identify each record and it is not being used. How can I get the data into the field as it should be? I assume when a vendor's

  • I'm trying to install itunes on windows 8. Please help

    I'm trying to install itunes on windows 8. I've tried using the compatibility way, but it keeps going through the installation and then rolling back. Any suggestions?