Sound output not working anymore

Hi,
I've been working with Sound Ouput palettes since a few weeks and everything was working well, but now something happened and I can't hear no sound coming from my VIs.
This problem occurs even if I try to play LabVIEW examples such as "Generate Sound". Speakers work correctly, infact other programs such as windows media player are able to play sounds.
I have Windows 7 and LabVIEW 2013... Does anyone know which could be the problem??

may be device selection changed.
Try with the below Express VI which is avilable in Sound VIs.

Similar Messages

My sound is not working anymore on my mac book pro

My sound on my mac book pro is not working at all anymore. I used it in the morning and it worked just fine and i came back at night and my sound was gone. I checked my output settings, raised the volume up all the way, made sure that i wasn't on mute, everything... Even when i plug my headphones in it doesnt work...
Any ideas???

Hopefully one of these steps should solve the problem.
1. System Preference > Sound > Output > Internal Speakers
    Highlight Internal Speakers / Headphones
    Make sure that Mute is not enabled.
2. Remove the headphone.
    If you see red light in the headphone port, plug the headphone
    in and out of the port 5 or 6 times to flip the microswitch inside.
    Sound output may be stuck in the digital mode.
3. Reset PRAM. http://support.apple.com/kb/PH4405
4. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
5. Applications > Utilities > Audio MIDI Setup
    Audio Devices window
    Side Bar
    Click the Built-in Output.
    Under Mute any of the boxes checked? If so, uncheck it.

HT3986 Why does the sound output not work on Windows 7 Bootcamp?

The internal speakers work fine, but I want to use my surround sound and can't seem to get it to work. It doesn't even work with headphones. Is there an update I need to install or what?

Alll I can offer is what I bookmarked, that you can access, other threads, and of course Google and what others have found works.
A simple instruction manual I can't offer but a few words of wisdom, Apple provides driver to enable a chip or device but that is not the end, just the beginning.
"Cirrus+audio+iMac+Windows"

TS1702 iPhone 4s Facebook Notification alert Sound is not Working anymore???

I am using Apple iPhone 4s, 5.1.1, recently I noticed that the notifications which I am receiving on facebook the sound is missing there, Before there was a sound on each and every notification of facebook, I tried to Uninstall the Facebook application from My Smart Phone, then restart the Phone, again re-installed but the issue is same, the Notification sound for Facebook is not ringing,
I checked all the settings and they all are ok.
I surfed the Web and somewhere found to deavtivate the facebook account and reactivate the account but that also didn't helped to Me, then I checked My account on the I-Pad, it didn't worked there as well, I used My friends facebook account on My Phone the Notification started to ring, I am not getting whats wrong, Can anyone Help Me Out this Problem???
Thanks in Advance.

Hi AppleUser543210,
If you are having issues with your iPad's notification alert sounds not functioning, you may want to try some things to troubleshoot.
First, quit all running applications and test again -
Force an app to close in iOS
Next, I would try restarting and if needed resetting the iPad -
Restart or reset your iPhone, iPad, or iPod touch
If the issue is still present, you may want to restore the iPad as a new device -
How to erase your iOS device and then set it up as a new device or restore it from backups
Thanks for using Apple Support Communities.
Best,
Brett L

Why is my Cambridge Sound System 5.1 not working anymore in OS Mountain Lion

why is my Cambridge 5.1 sound system not working anymore in OS Mountain Lion?

Hi Jean,
Long shot, but...
Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there, some things will change it for their own use, then not set it back.

HP Pro 3125 MT - Windows 7 Enterprise 64. Sound is not working.

HP Pro 3125 MT - Windows 7 64 bit. I've installed the audio driver SP51083 as suggested by HP (here).
As soon as I installed them the sound is not working anymore. The sound card is seen by the control panel, and everything seems to be correct (the system even detect when a jack plug is connected or disconnected to the audio card), but no sound come out from the speakers. I just hear a soft buzz.
I couldn't rollback, so I tried to uninstall drivers and install Realtek ones (here)
Same result.
Note: speakers are working ( if I plug them to another computer they works witout problems). However even headphones are recognized by the Realtek panel, when connected, but the output is, also in this case, always a buzz.
Any idea? Thank you.

Hi:
Did you try uninstalling the entire audio device?
Right click on the device and select uninstall, and check the box that says uninstall drivers. reboot and see what happens.
Then if the audio doesn't automatically install, you can try manually reinstalling the driver by browing to the installation folder that was created when you extracted the driver.
Click on the audio driver in the device manager. Click on the driver tab. Click on update driver and browse to the driver folder that was created. The HP driver would be found in C:\SWSETUP\sp51083.
If none of that works, maybe someone else has another idea you can try.
When I am confounded by issues like this, I reinstall the OS, applications notwithstanding.
I look at it this way. I can spend hours getting nowhere, or I can bite the bullet and get my PC back up and running. Then I know not to install a program or driver the next time that killed a function of my PC.
Paul

Alerts sounds are not working after upgrading to iOS 7.1.2

Hi,
I've noticed that all the alerts sounds are not working anymore after upgrading my iPhone 4S to iOS 7.1.2
I’ve reviewed similar posts regarding the same issue; and it seems this is a common issue in iPhone 4S when upgrade to iOS 7.1.2.
Apple, please Advise if there anything I can do to resolve the issue especially that my work deepens on the push emails and alerts that requires prompt response.

I got this issue resolved.
It caused due to some dirt in the charger slot; such dirt caused the phone to assume as if it is connected to a car kit and that is why it does not produce any sound except the Ringer and the Alarm.
It has been fixed by cleaning the charger slot by toothbrush! with some
drops of a cleaner.
Do not do it by yourself, as it might be a risk; rather, let it to be done by an expert.

Sound & iCal not working + other questions

Hi, I'm a new mac user and at the moment I have many, many questions...
1) My sound is not working! I remember it working well last night but when I woke it from its sleep today, it doesn't make a sound anymore, and the F4 & F5 that you can use to adjust the sound don't respond either o_O There's nothing plugged in, when I check the sound panel in system preference, it is set to the maximum, and the mute box is unchecked...however they are both greyed.
2) My iCal was initially working as well. However when I updated (5 minutes ago), it stopped responding. When I click on the application icon, it jumps in my dock but it doesn't open...
3) I also tried to install this application named Atomix Dojam X. I had an older version of it, but I deleted it and wanted to install v.X because the older version ran on Mac OS X 9. However, when I downloaded it to my desktop and ran the setup guide, I cannot change the destination (the default destination is Macintosh HD), and even though it says "installation successful" in the end, it does not appear in my application folder nor anywhere else...
4) I was also wondering...when I updated my real player and msn, I think they were kind of "updated on the spot"...okay that didn't make sense. What I meant was they weren't updated in the application folder. So when I delete the icons on my desktop, the applications stop working as well. Is there a way for me to move those applications to the application folder? I tried, but it denied my attempt because "application cannot be modified"...
5) My computer has a memory of 640 MB, the processor is 867 MHz. But I'm getting a bit frustrated with the current operating system because everything that Apple offers now requires Mac OS X 10.3.9 and above. I was wondering if my computer run Panther/Tiger and be as fast as it can operate now?
Sorry, this was a really long post. I will be extremely grateful to anyone who is willing help. Thanks in advance!

Hi yukinu,
First of all, Welcome to the  Discussion Forums!
1) My sound is not working! I remember it working well last night but when I woke it from its sleep today, it doesn't make a sound anymore, and the F4 & F5 that you can use to adjust the sound don't respond either o_O There's nothing plugged in, when I check the sound panel in system preference, it is set to the maximum, and the mute box is unchecked...however they are both greyed.
What is selected in System Preferences>Sound for your Output? Is it showing "Internal Speakers" and is it selected/highlighted?
2) My iCal was initially working as well. However when I updated (5 minutes ago), it stopped responding. When I click on the application icon, it jumps in my dock but it doesn't open...
How did you update? Through Software Updater or through Apple Downloads website?
3) I also tried to install this application named Atomix Dojam X. I had an older version of it, but I deleted it and wanted to install v.X because the older version ran on Mac OS X 9. However, when I downloaded it to my desktop and ran the setup guide, I cannot change the destination (the default destination is Macintosh HD), and even though it says "installation successful" in the end, it does not appear in my application folder nor anywhere else...
Sorry, I don't use the software myself, but have you tried going to their website>support and see if they have any install troubleshooting tips?
4) I was also wondering...when I updated my real player and msn, I think they were kind of "updated on the spot"...okay that didn't make sense. What I meant was they weren't updated in the application folder. So when I delete the icons on my desktop, the applications stop working as well. Is there a way for me to move those applications to the application folder? I tried, but it denied my attempt because "application cannot be modified"...
I would suggest going to their website, again, and finding the install instructions and follow them for your version of OSX. Not sure what you mean by the "icons on my desktop" that you deleted but I assume you are referring to the downloaded "install" files? How did you know that they weren't "updated" in your applications folder? Did you do a Get Info on the icons for the apps in your Applications folder to check the version after updating?
5) My computer has a memory of 640 MB, the processor is 867 MHz. But I'm getting a bit frustrated with the current operating system because everything that Apple offers now requires Mac OS X 10.3.9 and above. I was wondering if my computer run Panther/Tiger and be as fast as it can operate now?
Your PowerBook G4 867 Mhz 640 MB ram installed is more than adequate to run either Panther or Tiger. But, I would try making sure your Disk is ok first before attempting to upgrade the OS since you appear to be having some problems. They are probably not related to disk corruption but you should boot to your install cd and Repair Disk using Disk Utility on the install cd first to make sure.
I would try running both, Permissions Repair from your HD and then booting to your install disk and running Repair Disk anyways to see what errors if any you receive. There will undoubtedly be spurious errors running Repair Permissions but if any that cannot be repaired you should note them along with the errors that cannot be repaired with Disk Utility>Repair Disk from your install cd. You should always run Repair Permissions from your Disk Utility on your HD before and after any software installations to have a smoother/successful update/upgrade.
littleshoulders

Edirol UA-25EX Sound Input not working after 10.6.6 upgrade

Hello,
I am using an Edirol UA-25EX sound card for sound input (mike) and output.
Since I upgraded to 10.6.6, sound input is not working anymore.
I tried to unplug / replug. I tried to reboot. I tried to uninstall and reinstall Edirol's driver for Snow Leopard.
Nothing worked. Any help ?
Thanks
Seb

By switching the sampling rate at the rear of the device, unplugging and replugging it, I manage to make it work again
Strange
Seb

My sound does not work on my computer

Hey
I don't know if anyone can help me but my sound is not working on my computer. I went to my system preferences and when I click on output it says that the device has no output controls. I don't know why it is doing this. Can anyone help me to solve this problem?

See:
* https://support.mozilla.org/kb/No+sound+in+Firefox
* https://support.mozilla.org/kb/Video+or+audio+does+not+play
You can click the Volume icon on the Windows Taskbar near the clock and click the Mixer link at the bottom to open the mixer.<br />
You can adjust the volume level for each application in that window, so make sure that Firefox is not muted or set at a low level.<br />
Current Firefox versions use the plugin-container process to run plugins, so you need to check the volume setting for the plugin-container process.<br />
You will only see the Firefox program or the Plugin Container in the Mixer if you are on a website that plays sound.

My hdmi adapter not working anymore, no physical damage. Solution?

My hdmi adapter not working anymore, no physical damage. Solution?
Strange is, that i used it several times, it worked fine. Then wothout any reason (like software updete, etc) it just stopped workung, no sync.
I have not changed any parameters of my TV or Beamer.
Hardware:
Ipad 2, Apple Ipad HDMI Adapter, Samsung P2770FH, Optoma HD 65.
Thanks for any help.

I've only used mine a couple of times without any problem, but due to the thinness of the iPad, care has to be taken in inserting the adapter. Slightly wrong angle and it won't go it.
I had a laptop a few years ago where the USB connector failed. I had it replaced under the warantee, The service man told me it was not an uncommom failure on a laptop due to people "torquing" the USB socket while inserting/removing USB items. I have much the same feeling when inserting either the charger cord or my HDMI adapter.
From your description, unless the HDMI adapter failed internally, it sounds like the socket is causing the problem. A few days ago we watch our first movie from the iPad via my ATV2 and "Air Play". Worked great so I don't plan on using the HDMI adapter much at all in the future. Yes, it is a $99 solution, but it works for me. Of course, I already had the ATV2. I doubt if I would buy one just for this abiliity. If nothing else, it seems like a trip to the Apple Genius bar is in order for maybe a replacement unit.
However, with iOS 5 coming out with supposedly total mirroring, it might be worth thinking about getting an ATV2.

I upgrade my iph4 to ios 7.1.2 and the microphone is not working on video camera, is not working anymor also the microfon on speaker mode, please help me

Hy guys, i upgrade my ios 7.1.1 to 7.1.2 and now iths not working anymore my microphone on video record, the camera is working , is recording but without sound, and also the microphone on speaker, when i activat the speaker the microphon is not working. I do a full reset on my iph but still not working , also my girlfriend have same problem.Please help me, thx.

To rule out a software issue, try to set it up as new device, without using the latest backup, explained in this article:
How to back up your data and set up as a new device
If this does not help, the problem might be hardware related and the phone needs to be serviced by Apple or an Authorized Apple Service Provider:
iPhone - Contact Support - Apple Support

Std 9.0 + Access 2007 + network connection, PDFMaker not working anymore

Hello,
when i try to create a PDF file from an Access report, it isn't working anymore when i have a network connection. It worked for months, but yesterday Access 2007 crashed and it asked to deactivate the COM Add-In from PDFMaker and my Co-Worker clicked on yes while i was absent. So even after reactivating the Add-In and reinstalling the whole Acrobat Standard, i can't create any PDFs anymore from Access 2007 while i have a active network connection. When i plug off my network cable, it's working, as soon as i plugin the network cable again, it's not working anymore. And it only happens in Access 2007, PDFMaker in Word, Excel etc is still working fine.
Anyone got some ideas or solutions?
Best regards
Chris

Can you create a PDF by printing to the printer? It sounds like you may simply need to do a repair to Acrobat.

Alsa not working anymore after pacman update

I had problems with my sound in arch linux. But then I uninstall pulseaudio and then my sound worked.
However, two weeks ago I performed an pacman update and now the sound isn't working anymore.
I provide my configuration data. I did all the obvious stuff like unmute, aplay -L etc. and checking sound with root account.
Can someone help with this problem?
[root@st]# aplay -D sysdefault *.wav
## ==> NO SOUND
# lspci | grep "Audio"
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
01:00.1 Audio device: NVIDIA Corporation GK107 HDMI Audio Controller (rev a1)
## aplay -L
aplay -L
null
Discard all samples (playback) or generate zero samples (capture)
pulse
PulseAudio Sound Server
sysdefault:CARD=PCH
HDA Intel PCH, ALC269VC Analog
Default Audio Device
front:CARD=PCH,DEV=0
HDA Intel PCH, ALC269VC Analog
Front speakers
surround40:CARD=PCH,DEV=0
HDA Intel PCH, ALC269VC Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=PCH,DEV=0
HDA Intel PCH, ALC269VC Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=PCH,DEV=0
HDA Intel PCH, ALC269VC Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=PCH,DEV=0
HDA Intel PCH, ALC269VC Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=PCH,DEV=0
HDA Intel PCH, ALC269VC Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
hdmi:CARD=NVidia,DEV=0
HDA NVidia, HDMI 0
HDMI Audio Output
hdmi:CARD=NVidia,DEV=1
HDA NVidia, HDMI 1
HDMI Audio Output
hdmi:CARD=NVidia,DEV=2
HDA NVidia, HDMI 2
HDMI Audio Output
## cat /etc/asound.conf
pcm.!default {
type hw
card 0
ctl.!default {
type hw
card 0
## cat /proc/asound/modules
0 snd_hda_intel
1 snd_hda_intel
## lsmod | grep snd
snd_hda_codec_hdmi 30098 1
snd_hda_codec_realtek 39515 1
snd_hda_intel 36904 0
snd_hda_codec 149569 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
snd_hwdep 6340 1 snd_hda_codec
snd_pcm 77709 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc 7242 2 snd_pcm,snd_hda_intel
snd_timer 18726 1 snd_pcm
snd 59173 7 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec,snd_hda_intel
soundcore 5450 1 snd
## ls /dev/snd/
by-path controlC0 controlC1 hwC0D0 hwC1D0 pcmC0D0c pcmC0D0p pcmC1D3p pcmC1D7p pcmC1D
Last edited by stevebach (2013-11-26 23:12:02)

type hw
Remove your ill-advised /etc/asound.conf - it's bypassing dmix.
To make the correct soundcard the default, there's various methods - google it.

Since update my IPAD 4 Wi-Fi Cellular (MM) A1460 to iOS 7.0.3 is not working anymore

Hello!
My iPAD 4 with WI-FI and Cellular (MM) model number A1460 (iPAD 3,6) after an update to iOS 7.0.3 from iTunes is not working anymore.
I tryed for 3 times than I put him in recovery mode and hw gave me this error:
[11:24:27.0127] Restore completed, status:1
[11:24:27.0127] Failure Description:
[11:24:27.0127] Depth:0 Error:AMRestorePerformRestoreModeRestoreWithError failed with error: 1
[11:24:27.0127] Depth:1 Error:The operation couldn’t be completed. (AMRestoreErrorDomain error 1 - Failed to handle baseband update status message)
I can't get him out of recovery mode
If someone cand help me, I'll give him a big gift.
If you need I have the log from updater.
Thank you in advance and I'll wait for an answer.
Cheers!

Hey rmacbeth, I'm sorry to hear about your iPad troubles. It seems like with every major iOS release, these issues come up on older models (the iPad 3 is relatively new though...weird)
Anyways, it sounds like you've tried everything already and nothing seems to be working. If you're sure that it's a software issue with iOS and has nothing to do with your physical home button, I'd recommend restoring your iPad to factory settings by doing the following:
1. Make a backup of your iPad (just connect it and select the backup option in iTunes)
2. Next, select factory restore. It'll ask you to back up your iPad here if you haven't already.
3. Try quickly setting it up as a new iPad.
4. Try to duplicate the issue with the freezing, just use it for a day and see if it happens at all
5. If everything seeems to be working, restore again except this time, do it from the backup you made earlier
6. Try again to see if the issue comes up by using it normally in a day
7. If it does happen again, take it in to the Apple store to get it looked at as there may be some underlying software issue that a factory restore can't resolve
Again, sorry about your iPad, I hope you can resolve your issues quickly!

Sound output not working anymore

Similar Messages

Maybe you are looking for