Sound output: Repeat Track and Pause

Hi,
I have to read from a .wav file and hear it from the sound card until I press a button. When the file ends, the program has to start again from the beginning of the file (as a "Repeat Track" function).
I would like to have both a Pause button (that makes me start from the last point of the file)  and a Stop button (that starts again from the beginning of the file).
The Play Wave block allows to listen again and again the .wav file but I haven't been able to stop it in any way. Instead, using the Sound Output Write block I can stop the sound but I don't know how to listen the file in the "Repeat" mode.
Can someone help me please?
Thanks

Hi Biomed,
you can use the control called Windows Media Player, so that you can completely control the media you want to play.
Be careful because you have to enable the wave reading oin the media player: https://answers.yahoo.com/question/index?qid=20090​324123934AAyqWkM
One you've done so, you can use a property node to choose the media file you want to open and control the reproduction of it like the media player as a standalone app.
Hope it helps.
FBM

Similar Messages

  • Sound Output - Internal Speaker and Headphone Jack?

    I just installed my new iMac, which replaced my Mac Mini. I hook my Mac to my stereo via the headphone jack for playing iTunes. But most of the time I don't have the stereo on.
    is there a way to keep the headphone jack plugged in and still have audio come out the internal speaker? Basically send audio output to both the internal speaker and the headphone jack at the same time?
    On the Mac Mini this wasn't an issue because I had a splitter that ran from the mini to my monitor speakers and to my stereo.
    Thanks!

    Hi, you can get the internals to give notice of emails & actions..externals for any other sound..
    Sadly your wishes on this matter will not come to fruition...L

  • Is it possible to set the sound output to Firewire and HDMI at the same time?

    I would like to use Amarra for playing music thru the Firewire to a DAC and I would like the family to be able to use the MacMini for streaming sources thru the HDMI without having to change any settings every time. I'm running 10.8. Is that possible thru any special settings or separate software?
    Thanks in advance
    Harry

    The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
    Do some web searches for using software called Soundflower in conjunction with other 3rd party audio software to set up your own audio input and output sources.
    That is all I know about it. I have read a few ideas for doing such things over the years.

  • 2 Apple TV's and no sound output when using AirPlay/mirroring?

    Hi,
    Bought my first apple tv and when air mirroring was able to go to my system preferences and choose sound output for it and it worked beautifully when I wanted to play a movie on my computer and send it to the TV.  Bought a second apple tv for the bedroom, both are connected over wifi.  Using Mountain Lion on my iMac.  Now it won't play any sound on either and will not let me choose which apple tv in system preferences - sound.  Any help would be appreciated
    Sue
    I have tried turning Apple TV on first, then choosing sound output before turning on air mirroring.  Problem is it won't let me choose, stays on internal speakers.
    This fix won't work for me.

    Might I recommend the following sample code instead?
    [http://www.jsresources.org/examples/MidiNote.html]

  • Muine: no sound output, segfaults

    When I try to play anything with Muine, it prdouces no sound output, then segfaults and crashes:
    /opt/gnome/bin/muine: line 3: 5287 Segmentation fault /opt/mono/bin/mono /opt/gnome/lib/muine/muine.exe "$@"
    Do I need to emerge something else, or is this a known bug?

    Muine requires the DEVEL versions of Mono/GTK#. These packages are currently in TESTING, so I can not rebuild Muine against them.
    When they make their way into EXTRA, I can rebuild.
    The best solution would be for a dev to put Muine into TESTING as well, so it always stays on the same track.

  • Two sound outputs on one box

    Is it possible for one to configure a system to use two sound outputs: 1) HDMI and 2) standard RCA stereo out?  My goal would be to have the main system sound use the HDMI (applications like mplayer for example) and to also have mpd to use the standard RCA stereo out.  I'm currently using pulse audio but am open to anything.
    Thanks for the advice.

    I just tried it. I set account A to use internal speaker, B to use iMic audio output. I started iTunes on each account. I can fast user switch and A always plays through the internal speaker, B though the iMic.

  • I cannot change sound output to line out

    I have a first gen 8-core Mac Pro 3GHZ. Since upgrading to Snow Leopard, the machine wont let me change the sound output so that the sound comes out my external speakers. Have tried binning all sound prefs files, re-booting, PRAM and rebuild permissions. I know the speakers work and have tried using sound preferences panel, and Audo/Midi panel
    Help!
    Thanks in advance

    Same here. Every time I reboot the sound defaults back to internal speakers. But it gets worse from there.
    If it goes to the screen saver and log back in the sound is still set to line out but the output volume no longer works. By that I mean I can press the up and down volume on the keyboard and the volume control picture appears on the screen. However, the output volume under preferences>sound>output does nothing and the sound remains at the same volume. If I take the keyboard down to mute it will mute the system and cause the check box to activate. In order to fix the problem I have to click on internal speakers and back again to line out. At that point my volume controls work again.
    Yippie Snow Leopard. Between that and taking away Quicktime's ability to make movies with picture files I wish I had waited on the upgrade.

  • One long repeating beep and no video output

    Sometimes when switching on a system build with KT6 Delta , I get one long repeating beep and no video output. The problem usually is solved if I unplug the monitor cable from the vga card and plug it in again. Still, I am thinking why does this happen since the cable seems to be connected fine?

    1 Beep: DRAM refresh failure
    Explanation: The system is having a problem accessing the system memory to refresh it. Refreshing is done on all system memory to keep its contents active.
    Diagnosis: This code usually means a problem either with the system memory or with the motherboard itself.
    Continuous Beeping: Memory or video problem
    Explanation: The system is producing constant beeping in no specific pattern, or a fast "ringing" sound.
    Diagnosis: This is usually caused by a problem with the system memory, or possibly the video card. The memory is more likely--the system complains long and loud if it can't find any usable memory, as there is no way to even start the boot process when this is the case. The motherboard itself could also be the problem.

  • Music spontaneously starts, stops, stutters at random and I'm not even using that app. Repeated attempts to pause the song and close the app have no affect. Just keeps popping on and off randomly no matter what I'm doing at the time.

    How do I eliminate this glitch?  Music spontaneously starts, stops, stutters at random and I'm not even using that app. Repeated attempts to pause the song and close the app have no affect. Just keeps popping on and off randomly no matter what I'm doing at the time. I tried double-clicking the Home button which brings up all of the active apps, touched and held the Music icon until all the icons started wiggling, tapped the Close icon in the upper left corner of the Music app to close the app completely, but the app is still open and still randomly stuttering. I did notice that the play button icon flashes in the upper right corner of the screen when this happens and it appears and disappears in concurrence with the Music app stuttering. When the music starts, the icon appears and when it stops, the icon disappears again. When the music stutters on and off, the icon appears and disappears rapidly and in sync with that random glitch. This just started today for no apparent reason. I turned the iPad off, waited 30 seconds and turned it back on. As soon as it was finished starting up, the same music glitch began again immediately. I'm using iOS 6.1.3.

    Well, no one seems to have any answers or ideas for me, I'll update what I've been able to accomplish.
    I reloaded all 14 disks in the time frame of watching Lord of the Rings on Fri. nite.
    Funny thing is, the first disk pulled the info from the online store! Hooray!
    Wait-then all the next 13 could find no information online...what the heck is up with that? So I MANUALLY assign each disk a new track # to co-inside with each disk, spent about 2 hours doing that.
    But still, itunes tells me my playlist is too large, there's not enough space on the ipod. so I unchecked 1 1/2 disks (I'd listen to 1/2 of disk 1 previously) and voila! there's my ipod full of my book. Finally. But what a lot of bother just to keep things in order!

  • No Sound Output options - and no sound - when in Native OS 9

    Hi,
    on my MDD G4 (the last one, single 1.25GHz G4), I have no sound output option in the Sound Control Panel, when started in native OS9. As a result I cannot increase the volume above 'mute' and hence have no sound at all. Extensions-off makes no difference.
    In Mac OS X, all variants I've tried, I have perfectly normal sound. In Classic mode too, sound works (but I can't use the Sound CDEV obviously).
    Is there a special driver (Sound Manager vXXX?) required for this machine or what? The Sound Manager which it does have, which is shown during startup, is not crossed out.
    Thanks for all suggestions!
    Cheers, A.

    Yes, that was my suspicion actually, because I am quite sure that I am NOT using the correct OS. I bought the MDD second hand, and it didn't come with OS9 disks. I tried installing a retail OS 9.2 system, the installer told me No, not on this Mac. Even weirder, when I copied someone else's OS9 disk, which was allegedly from a MDD also, I was also told by the installer No, I don't work with this hardware. I guess that the disk I got was from an earlier MDD (http://support.apple.com/kb/SP63), not the 1.25GHz later one (http://support.apple.com/kb/SP106), though I don't know what actual hardware differences there are.
    I eventually just copied the system folder from my Yikes 400 G4, updated it in Classic mode to 9.2.2, then restarted in native OS9 and wow, it worked. Except for the graphics card, drivers for which were a nightmare to track down. ATI has somehow removed all OS9 drivers from the entire internet (yeah, who'd have thought that that was possible!). Again, eventually I found someone who had hoarded the ATI Retail Driver Installer from October 2002 and he kindly let me copy it and then yay I had graphics acceleration. (Even the Finder was awful to use without it).
    Chances of finding a machine-specific installer disk for THIS particular mac are very small I suspect.
    Cheers, A.

  • No sound output and preferences won't open

    Hi all,
    I am using (or trying to use) GarageBand 3 on my MacMini and I am having problems. I have a movie project I am trying to work on from iMove and I use the share function to move it over to garageband so I can edit the audio track and while in GB I can't hear any audio output from the computer. I see the level indicators lighting up like there is sound but I hear nothing which makes garageband useless as an audio editor. Also I can't seem to get it to open the preferences windows. I hit the command and nothing happens. I've erased the preferences files in my library found but that hasn't helped. Any ideas?

    Ditto to the above. I too am having the same symptoms of no audio within GB3 only after upgrading but levels light up perfectly plus I am unable to to address GB prefs without first rebooting. What's up with this? All other iLife '06 apps run fine on my G4 Digital Audio. This was after a fresh install of iLife '06 by the way running X.4.5.
    I tried looking up the answers on the link that samccormack kindly provided above but nothing happens. I simply get an error message. Might you be able to let us know on this thread what the link was about or how to address the no audio and vanishing preferences that refuse to open up within GB3?
    TIA

  • TS1574 Hi, I dont have sound on my imac. The options in sound are greyed out and there is nothing in the output list

    itunes and you tube are not working.  There is no sound. When I am in itunes and play a song, the song does not start.
    I checked system preferences, sound.  There is no output options and the input options are greyed out.
    Does anyone know how to fix this problem?
    Thanks

    Go step by step and test.
    1. System Preference > Sound > Output > Internal Speakers
        Highlight  Internal Speakers.
        Make sure that Mute is not enabled.
    2.Plug in and  remove the headphone.
        If you see red light in the headphone port, plug the headphone
        in and out of the port 5 or 6 times to flip the microswitch inside.
        Sound output may be stuck in the digital mode.
    3. Reset PRAM.  http://support.apple.com/kb/PH4405
    4. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    5. Applications > Utilities > Audio MIDI Setup
        Audio Devices window
        Side Bar
        Click the Built-in Output.
        Under Mute any of the boxes checked? If so, uncheck it.

  • ALV: How do I suppress repeating values and page breaks on printed output?

    Good day, everyone!
    First, I've done a LOT of searching trying to find the answer to my question, but I'm not finding an answer.  If this has already been answered and you can point me to a URL, I would appreciate it.
    Here's my issue:  I have a rather simple ALV report.  It has the columns of Person ID, Personnel Number, For Period, In Period, and Amount.  I sort by Person ID and Personnel Number, and if the value repeats on the next line of the report, I want to suppress it (make it blank).
    I thought the answer was in the following code, where I set the GROUP attribute to asterisk:
      CLEAR sortcat_ln.
      sortcat_ln-spos      = '1'.
      sortcat_ln-fieldname = 'PERSONID_EXT'.
      sortcat_ln-up        = c_true.
      sortcat_ln-group     = '*'.
      APPEND sortcat_ln TO sortcat.
      CLEAR sortcat_ln.
      sortcat_ln-spos      = '2'.
      sortcat_ln-fieldname = 'PERNR'.
      sortcat_ln-up        = c_true.
      sortcat_ln-group     = '*'.
      APPEND sortcat_ln TO sortcat.
    It looks PERFECT on the screen -- the values are suppressed if they repeat, and everything appears together on one screen.  However, when I print the report, two things happen:  1) The values repeat on each row, even if they are the same, and 2) I get a page break after each Person ID / Personnel Number combination.
    I now realize that I can't use the GROUP attribute.  Is there some other way in ALV to blank these repeating values and keep all the rows together on one page, rather than page breaking after each value change?
    Thanks!
    Dave

    Hi
    Same requirement i had before, when i try to print preview. the output of the grid display is in grouping is ok, but when i print preview or print it doesnt cater the grouping and page breaks, so what i did i modify the internal table use in alv , after hitting the print preview/print with the format desired by the user. you can do that in user-command. see code below
    FORM user_command USING r_ucomm TYPE syucomm
                            rs_selfield TYPE slis_selfield.
      DATA lt_sort TYPE lvc_t_sort.
      CASE r_ucomm.
        WHEN '&RNT_PREV' OR '&RNT'.
          t_final_x[] = t_final[].
          PERFORM clear_redundant.
          PERFORM set_sort_criteria USING lt_sort.
        WHEN '&F03' OR '&PRINT_BACK_PREVIEW'.
          t_final[] = t_final_x[].
        WHEN OTHERS.
      ENDCASE.
    ENDFORM.                    "user_command
    hope it helps

  • When I unplug my headphones my music pauses. But when I plug them back in the controls won't restart the music and I must go to the list of tracks and select a new one to start again

    I have an iPhone 5 with iOS 7.04
    If I am listening to music using my Apple earphones when I pull the earphones out the music pauses as expected. However, when I go back and plug the earphones in and try to play on with the music nothing happens and I have to go back to the list of tracks and select a new one from the start.
    This also is impacting my listening to music from my iPhone on my motorcuycle audio system. The iPhone is plugged into a USB port on the bike and prior to iOS7 always resumed playing music from wherever it was in a track and displayed the music track name on the bike info panel.
    Since upgrading now the music won't start and again I have to pull the iphone out of the glovebox and go back to the list of tracks and select a new track. But the moment the power interrupts or the nav audio cuts in and switches from iPod the music pauses and doen't restart as it always did.
    Apple, what have you done?? You have basically taken the very first App that made the iPod exist and stop it functioning properly. When are you going to fix this or is there already some obscure setting that needs to be changed but that is not prominently displayed in settings anywhere? How can I make my iPhone function as an iPod properly again for my music needs?

    Nothing wrong, no panic. Some general remarks:
    a. the battery will not be charged when over 95% full; a full battery is not charged
    b. it is good for the battery to have it go down to about 50% before recharging, say once a week at least.
    c. never let the battery go down completely, so that it shuts off on its own: that is very bad for a modern smart Li battery.
    d. sometimes the old "battery calibration" procedure is advised, you should not do that.
    trick: when you click the little battery icon in the top menu bar, you also see if there is a heavy energy user running.

  • In logic Pro, when I open up an audio track and load an audio file, there is no sound. I will finally get a sound out of one of the audio tracks after opening at least 5 of them alternately. Is anyone familiar with this kind of bug? It's really frustratin

    In logic Pro, when I open up an audio track or software track and load an audio file/loop or software file loop, there is no sound. I will finally get a sound out of one of the audio or software tracks after opening at least 5 of them alternately. Is anyone familiar with this kind of bug? It's really frustrating as this takes much time to complete work.
    os x, Mac OS X (10.6)

    I'm not sure I follow your words Fuzzynormal. You've helped by offering the insight that my issue in Logic Pro 9 is not a bug but a feature. But fell short of enlightenment by being a judge of character and of how one should interact in this forum. You insinuate that I haven't tried to solve the issue on my own when in fact I have. These forums are always my last resort. You further suggest that I am complaining. This is not a complaint. It is a genuine issue that I cannot figure out. Then you think that Brazeca is holding my hand and being a nice guy. Brazeca is helping people like me who might not be as adept at using Logic Pro as probably you are.This community forum was established to raise questions, answers and dicussion to help Apple's customers better undertand their operating systems and related issues. You are doing a disservice by not contributing positively and by trying to make this forum what you want it to be. You may have all the time in the world to try figuring out stuff but we are not all like you. We all have different schedules and different levels of understanding. And that is what this forum is for - to help people move forward. If you can't contribute positively then keep silent. And by the way, you say to "read the words that are printed down to explain to you how that works" what words are you talking about? Why don't you be of some help instead of trying to own this forum. 

Maybe you are looking for