Sound played on external speakers when there's no ...

I've connected my Nokia Lumia 520 with an audio cable to an external speakerset. The sound is good but when the phone sends no sound for (let's say) 30 seconds, there's a little beep heared on the external speakers. It couldn't be heard on headphones. Could it be that the phone turns the headphone jack off when there's no sound to play or should I worry about it?
sorry 'bout my bad English, I'm from the Netherlands

Hi, cossie102.
I appreciate your feedback regarding your similar problem. I saw the discussions already about that problem before posting mine. However, I felt that this is an entirely different problem. The calendar that is causing the problem is the Birthday calendar that iCal automatically creates. When you enter someone in your address book and put in their birth date, the Birthday calendar automatically updates with an annual entry for them. We don't manually set start and end times, thus ruling out the human error part of creating an end point that chronologically precedes the start point. Of course, this doesn't rule out a possible fault in the automation resulting in a bad/corrupt entry. I still should go back and check to see if I can determine a start to the dots, but my gut instinct tells me that this is something completely different.
Message was edited by: fudgypat

Similar Messages

  • Music plays through external speakers when earphones plugged in

    When earphones are plugged in sound plays from external speakers.  How can I correct this?

    hmm.. there can be a few issues and a few solutions... if there has been any type of water damage to your ipod this may not be helpful.. a few reasons why the external speakers are playing while the ear phones are plugged in may be 1) your ipod touch may not recognize that the ear phones are plugged in... to fix this you may try a few things.. 1. plug in your headphones slowly... that may fix the issue if it still doesnt work try blowing in the headphone jack to eliminate and dust.
    if you think that there is a hardware problem please take it to your nearest apple store.. they may be able to fix it or give you a new one

  • My iPod Touch will not play through external speakers when it is docked.  It only plays through it's internal speaker.  All the other functions on the iPod can be controlled by the external speakers (volume,track, etc).  How do I fix this?

    My iPod Touch will not play through external speakers when it is docked.  It only plays through it's internal speaker.  All the other functions on the iPod can be controlled by the external speakers (volume,track, etc).  How do I fix this?

    I would try in oreder:
    - Resetting the iPod:
    Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Restoring the iPod via iTunes.  First from backup and if problem persists, restore to factory defaults/new iPod.

  • Presenting on ipad: will the video sound play through external speakers?

    I'm giving a presentation on my iPad, using Keynote. I have always had problems connecting the iPad to the podium in our classrooms (using the connector)--the screen mirrors beautifully, but the sound doesn't get transmitted. There is a speaker jack on the podium that always works with my MacBook, but when I plug it into the iPad2, no sound (except for the iPad's own speakers). Can anyone help? I don't want to have to take my MacBook--but I need sound! Thanks.

    see if this links helps
    http://discussions.apple.com/thread/2420374?start=0&tstart=0

  • ITouch 2G playing sound through both external speakers and earphones

    iTouch 2G playing sound through both external speakers and earphones when earphones are plugged in..
    M using the latest version of itunes and iOS 4.2.1
    ....Have already tried formatting, resetting and even formatting when my earphones were plugged in...
    Please help immediately..M out of warranty..

    Have you tried another pair of earphones? It may be that the headphone jack is failing. You can, if you are competent, replace it yourself or get it fixed by a third-part place. See the following:
    http://www.iresq.com/
    http://www.ifixit.com/
    http://www.irepair.com/ipod-touch-headphone-jack.html

  • No sound through external speakers when in Windows?

    Hi.
    I have a pair of Harmon Kardon soundstick speakers on my Mac Pro bwhich work fine in OSX but when i boot into Windows XP there is no sound through them. I can get it through Headphones and the (poor) internal speaker but not through my external Harmon Kardon's?
    This is driving me crazy as i need it for my games!

    Hi Mark,
    as promised my settings in XP:
    And as promised my settings, etc. in XP, which gives me full sound with my external speakers (alongside the internal one, but that's another story).
    Here we go:
    Audio with external speakers on MacPro while in Windows XP:
    OS: Windows XP with SP2 (slipstreamed by myself in my PC heydays)
    Drivers: Original BootCamp 1.1.2 Drivers CD
    In Device Manager (Control Panel - System):
    Audio-,Video- and Gamecontroller:
    - Audiocodecs
    - Legacy-Audio Driver
    - Legacy-Videorecording Device
    - Media Control Unit
    - Realtek High Definition Audio
    - Videocodecs
    In Realtek High Definition Audio:
    - Tab General:
    - Manufacturer: Realtek
    - Place: Path 65535 (Internal High Definition Audio Bus)
    - Tab Properties:
    - Audio Devices : Realtek HD Audio
    - Midi Devices : Reattek HD Audio
    - Mixer : Realtek HD Audio
    - Line-In Devices : Realtek HD Audio
    For all Devices: Driver activated and functioning
    Using Audio functions on this device = On
    - Tab Driver:
    Manufacturer: Realtek Semiconducor Corp.
    Date of Driver: 24.08.2006
    Version of Driver: 5.10.0.5288
    System Devices:
    - Microsoft UAA Bus Driver for HD Audio is installed
    In Audio and Audio Devices (Control Panel):
    Realtek HD Audio output:
    - Tab Volume:
    - Device Volume: 1/3 of full
    - Sound off: not set
    - Volume Control in Task Bar: Set
    - Speakers Property: Deskto Stereo Speakers
    - Tab Sounds:
    - Sound Scheme: No Sounds
    - Tab Audio:
    - Sound-Playback and - Recording: Realtek HD Audio (output / input)
    - Midi: Microsft GS Wavetable
    - Tab Voice:
    - Voice Playback and -Recording: Realtek HD Audio (output / input)
    - Tab Hardware:
    - Sony DVD RW DW-150A
    - Realtek HD Audio
    - Audiocodecs
    - Legacy-Audio Device
    - Media Control Unit
    - Legacy Video Recording Device
    - Videocodecs
    For all: Device Ready
    In Software (Control Panel):
    High Definition Audio Driver Package - KB888111
    - Support Info: Version 20040219.000000
    Realtek HD Audio Driver:
    - Size: 28,20 MB
    - Support Info: Version 5.10.0.5288
    Let's hope you find some differences to yours, so maybe we have a chance to get this sorted out.
    Please keep in touch.
    Stefan

  • HT1688 My iphone is neither shown in itunes nor in redsnow .. what is the problem ? It has the black screen and the sound plays when it is plugged into the computer .. I tried to hard reset but only the sound plays nothing is shown is there any solution t

    My iphone is neither shown in itunes nor in redsnow .. what is the problem ? It has the black screen and the sound plays when it is plugged into the computer .. I tried to hard reset but only the sound plays nothing is shown is there any solution to this ?? It says that my iphone is in soft dfu mode and in the my computer > manage>device manager > it shows the apple (dfu mode) having some error sign indicating no software installed i am running windows 8 ..

    Jailbreaking iOS can't be discussed in this forum.

  • IN SL can't get chime to play thru external speakers

    In 10.5 all my computer's sounds were set to be played thru external speakers. Now I can't get the startup chime to do it as it only plays thru the INTERNAL.
    Any reason?
    rd

    Older Macs could play the startup chime through external speakers plugged into the headphone socket; but from a few years back this changed and on modern Macs the chime always comes from the built-in speakers.

  • Play through phone speakers when dock connected

    Can I play through phone speakers when dock connected?  I bought a new case to mount my phone to my bike's handlebars.  To allow use of other attachments, the case has an internal dock connector.  I want to play music through the speakers while riding (rather than headphones), however, due to the cases internal dock connector, it seems I cannot do this.  Any suggestions?

    I would try in oreder:
    - Resetting the iPod:
    Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Restoring the iPod via iTunes.  First from backup and if problem persists, restore to factory defaults/new iPod.

  • HP laptops diverting sounds from external speakers when headphones connected

    Hi there,
    The problem is reproduced in several cases, but the most annoying is the following:
    1. Headphones are connected to the laptop (I assume all sounds must go to the headphones, not to the speaker)
    2. Have skype (or googletalk or several other apps) run in background
    3. Have browser (chrome, firefox) open and youtube video is being showed
    4. Message comes to IM (skype, gtalk...) and when BEEP from the application is played - it is played not in headphones, but in external speakers!
    I though the issue was with skype - but after some time I faced with the same problem in other apps - and it is not reproduced on other laptops (not HP).
    The problem is being seen on several different HP laptops. Here is details of my laptop:
    HP ProBook 6550b WD700EA#ACB
    Windows7 Enterprise 64bit, SP1

    Ok I have it Fixed on my computer.
    In the control panel then sound there are 3 devices.
    AMD HDMI Output
    AMD High Definition Audio Device
    Speakers and Headphones
    IDT High Definition Audio CODEC
    Communications Headphones
    IDT High Definition Audio CODEC
    What apears to happen is that as soon as a communications type program starts it devides the audio inbetween 2 mixers and seperated the headphone jack from the main audio card. As soon as I right clicked and disabled the "Communications Headphones" Then there is only one mixer that focres all applications to use the heaphone jack instead of the regular applications through the external speakers and communication applications to the headphone.
    If for any reason you want to reactivate the "Communications Headphones" one you disable you will need to right click in the sound windows and select show disabled devices.

  • Chromebook 14 continuous buzzing sound through external speakers when powering on

    I have this consistent buzzing sound when I power on my Chromebook.  Every time I power on, an electrical buzz through my external speakers (plugged in to the headphone outlet) remains until I completely unplug the speakers cable from the Chromebook, and then plug it back in.  Unplugging and plugging the cable back in always stops the noise.
    Is there anything I can do to keep my external speakers plugged in without the buzzing noise starting when the Chromebook is powered up?

    The speakers are made by Creative, Inspire t3000.
    1.  Yes, they are powered, so they are always plugged in to a wall outlet and I leave them on always.
    2.  Yes, they are normally the speakers for my desktop Windows system.  I've don't have this problem with that PC.
    3.  No, I don't hear the same buzzing sound from the Chromebook's built-in speakers.
    4.  No, I have not tried another set of speakers yet.  I don't have any others at the moment.
    5.  No, there was no software with the speakers when I bought them IIRC.
    There is a loud buzzing thump noise made each time I unplug or plug in the speakers to the Chromebook even if it is powered off.  That's always been there.
    The buzzing noise appears for about a second whenever I power down the Chromebook, that happens a second or two right after it is powered off.  Also, if I turn the volume control down for the speakers, the buzzing sound volume is lowered too. But if I turn the volume down to where I don't hear the buzzing noise, I can barely hear the sound.  
    Update: I noticed after fiddling with the speaker volume control that the buzzing sound goes away now after about 30 seconds.  It didn't just a few days ago.  And it never had the continuous buzzing sound at all when I first bought the chromebook and used these speakers with it periodically.
    Thanks.

  • Does it consumes "exceptionally" more battery when music is played on external speakers?

    I m getting 5-6 hrs of battery life on my ipod nano 6g.i listen to music on my speakers rather than on the earphones dat came with it.So is the battery poor due to my listening music on speakers or there is some prob. inside my ipod?

    You should check that the equalizer is set to Flat. Also, Sound Check should be off, because it might affect your sound output. Also, check that the jack is properly in all the way. Nano`s have a tighter jack that some fifth gens.
    Hope this helps,
    Darie.

  • Strange sound coming through external speakers

    On my 2010 iMac there is a problem when *no audio* is coming out through the external speakers (connected via the headphone port).
    If i play any sound (even change the volume and get the 'blip' sound) and then go back to silence, after 5 - 10 seconds I can hear a strange buzzing/hissing sound.
    Even when I'm playing music there is no buzzing/hissing but when I pause the track, 5 - 10 seconds later the sound returns.
    Using these speakers through my macbook there is no such problem, only the iMac.
    I think this may be related to a recent software update since it is a new problem. Any ideas?
    thanks.

    Could there be a Ground loop in something connected to the iMac?

  • Sound still from internal speakers when connected to a bluetooth headset

    I just got some new bluetooth headphones for Christmas. I have them paired to my Macbook Pro. The bluetooth menu shows them as connected and if I hold option and click on the sound menu bar item it shows my current output and input device to be my headphones.
    When playing music it only comes out through my headphones. Some other applications (my IRC client and various others) also only produce sound through the headphones. However the Messages application and Skype application both produce there notification sounds out my internal speakers only.
    I would assume that this isn't really related to by headphones but rather the operating system not directing the sound to the proper output correctly.
    Has anyone experienced this? (been able to fix)
    Also for reference my headphones are Sony MDR 10rbt.

    I have the EXACT same issue. I've tried Googling for a solution every so often to no avail. Did you ever figure this out?
    Edit: Actually, I think I found a solution. I installed Soundflower (http://cycling74.com/products/soundflower/) and set the 2ch and 64ch to my Bluetooth headphones. In Mac System Preferences > Sounds > Sound Effects tab, I also set "Play sound effects through:" to Soundflower (both the 2ch and the 64ch seemed to work). Did the same in the Output tab. Now it seems like every sound is being pushed through my Bluetooth headphones! Hope this helps.

  • Video Sound Settings on external speakers via Airport

    When I playback my music videos from iTunes, why can't I get any sound through speakers plugged into an Airport base. No problems with music from the Library just effects video or DVD. The 'multiple speaker' flag is still there and I haven't changed the settings. Puzzling - anyone got any ideas ?

    There is about a 2000 millisecond delay when playing over remote speakers. Not a problem for music, but put the sound out of sync with the video, in other words speaker's lips move, but the sound comes later.
    Read more here: http://docs.info.apple.com/article.html?artnum=302713

Maybe you are looking for

  • Error while running sql queries..

    Hi there, We are suppose to run gather schema stats.. but while running the procedure we are getting following error.. gather_schema.sql: exec fnd_stats.gather_schema_statistics('CMWCONN'); exec fnd_stats.gather_schema_statistics('CMW'); exec fnd_sta

  • Replacing T420s HDD with a new SSD

    Hello, I wonderd if It is possible to replace the HDD with a new SSD, while placing the HDD in the Ultra-Bay slot. And if so, which SSD model should I buy, and how do I transfer the Operation System and data to the SSD? Will this SSD model be compati

  • Master/Detail SQLPlus report

    Hello, Can anyone help me to produce the following o/p using sqlplus commands, Order Number Ordered Date Currency Creation Date 1 01-Jan-2012 USD 01-Jan-2012 Line Number Item Line amount Type 1.1 A 10000 External 1.2 B 10000 External Order Number Ord

  • Updating a JAR that uses packages

    Hi There, I have a problem in that I am trying to update a class within a JAR which uses packages. The issue is that when updating the JAR, the class I have requested to update is simply placed in the root of the JAR and not in the required package.

  • Datasource not found in BI content

    Hi Gurus, I am working on BW CRM Service. I have activated all Cube , ODS and Infosource related to CRM Service my problem is I have activated ODS and Infosource of Detailed Controlling Data (0CRM_CODA & 0CRM_SRV_COSTS,0CRM_SRVCNF_COSTS)  but while c