Sound problem iPod Nano 5G

My iPod Nano 5th Gen. has the  following problem: sometimes the sound gets weird (when the headphones  are on, when they're not, the sound is too low). The sound seems cracked  and muffled. The only way to make it work again is to squeeze the area  in the bottom of the screen, even thought sometimes it's difficult to  make it work again.
This  started happening after I put the iPod in a shield case (made by  Belkin, which I believed to be a brand of trust when it came to device  accessories). The case was too tight for the iPod because it was  difficult for it to close. Even so, after I was able to close it, the  sound on the iPod wasn't working normally like it should so I took the  case off. The sound still wasn't ok so I found that way of squeezing it  in order for it to work again. I returned the case to the store.
But  the problem seems go on again, specially after I turn it off (when i  press the play bottom on the click wheel for a couple seconds) and if I  use the click wheel with the iPod resting on a plain surface. I believe  this must be a connection problem between the device and the sound.
I  would like to know if any of you ever had this problem, what else can I  do and, if there's nothing I can do to solve it, if you think that it's  worth repairing the iPod in an Apple support center (because, with the  experience I've had with another device that had a problem, sometimes  the price of repair is so high that it's cheaper to get a new device  instead of getting the actual one fixed).

You damaged a connection on the logic board when you forced it into the case.
You can make a Genius Bar appointment at your nearest Apple Store and do an out-of-warranty replacement and while you are there compare yours to the 7th Generation Nano and decide whether you want to get it replaced or get a new one.

Similar Messages

  • Cannot get any sound forn iPod nano 3 on my JBL iPod dock, it used to work fine, but I haven't used it for awhile.  Appreciate any suggestions for non technical grandmother. Thanks

    I have an older iPod nano.  I have a JBL iPod dock that worked fine with this over a year ago, but I tried it recently and I cannot get any sound to come out.  I am a technically challenged grandmother so this stuff does not come naturally.  Help would be appreciated.  Thank you

    Wow, thank you so much!
    Turns out there was a topic on the forums there with guy having same problem and they linked him to topics that saved his iPod too.
    Thank you so much, it works now

  • Found solution for connection problems iPod Nano 3rd gen to Windows Vista!!

    Hello people!
    I just found a solution to connection problems with iPod Nano 3rd generation when connecting it to a Windows Vista machine.
    Because of 'security reasons', Vista asks you to check the drive for errors when connecting the iPod.
    The thing to do here:
    Click the cross to exit the windows; DON'T CLICK 'do not check drive'!!!!
    So just click the red cross to close the window and the iPod should be recognized by iTunes.
    Symptoms:
    - iPod cannot be recognized by iTunes when you connect it.
    - iPod doesn't show up as a drive in Windows Explorer.
    I really really hope I solved your problem. Have fun!
    Jasper

    Have not been able to connect to iTunes for months, right about the time Microsoft put out the Zune! Would love to hear from a lawyer about a class action lawsuit againat Apple since this issue has not been resolved and we are required to use iTunes. In the meantime, filing a complaint with the Federal Trade Commission!

  • Sound Quality ipod nano

    I have recently bought an ipod nano having had a Sony hard drive walkman for a few years. The sound quality and memory size of the Sony was amazing, but if the unit moves too much it freezes so I decided to change to ipod.
    I am really happy with the ipod apart from the sound quality with some of my songs.
    A couple of albums (such as Andrea Bocelli) crackle during certain songs when played on the ipod even with the equalizer off or flat. They do not do this when played throught the computer with the same headphones, and I have tried recording the albums in different formats and frequencies. The majority of my albums play without any distortion.
    Is there some way to overcome this?

    I have had such an experience while listening to "Il Divo". I think you might have to play a round with the equalizer. It probably affects operatic songs.

  • Hardware problem Ipod Nano 2gb

    Recently I've bought Ipod Nano 2gb in the US. Now I'm installing it. When i connect the ipod at the pc, i-tunes recognize it. When I disconnect the ipod, the ipod doesn't react. It shows the screen for choosing the language but none of the buttons react to change something. The hold button is off.
    I've already reset the ipod, without results. The Ipod shows that there are songs on it, and you can play the songs that are downloaded on it.
    The PC recognizes the ipod as a medium.
    Does anyone has a resolution to this problem ?

    Just to make sure...when you say turn...you don't mean physically turn do you? Even though you stated the hold button is off, toggle the button a few times to see if that helps. If you have tried going through all of the 5 R's and the click wheel still will not allow you to make any movement through screens, then you may want to contact Apple for a warranty replacement. Few more questions...does the back light turn on when you touch the click wheel? Do you hear any clicks when you run your finger around the click wheel? I know you said that doing this doesn't allow you to navigate through the screens but I'm curious if it reacts in any way.

  • Problem: iPod nano 4th gen & video podcast

    Hi ladies and gents!
    Just bought a brand new ipod 4th gen. mp3 playback works perfectly, but i experience the following problem when trying to watch a video podcast (the file is ok, it works under itunes on my macbook):
    my ipod (nano) plays the first seconds of the podcast, but after some seconds the video gets stuck and the ipod doesn't react anymore. i tried several times to play different video podcast. they all get stuck after a few seconds (randomly something between 5 and 30 seconds)
    Has anybody had the same problem
    and has found a solution?
    Otherwise i'll go back to the shop to change the ipod for another one :S
    Greetz
    Markus

    After leaving the iPod to charge for at least 30 minutes, have you tried resetting it?
    How to reset iPod
    B-rock

  • Problema iPod nano 6g

    Praticamente io ho il mio ipod nano touch di 6g, sino a ieri quando lo spegnevo, alla riaccensione spuntava il logo della apple, quindi si spegneva totalmente; adesso quando cerco di spegnerlo mi va in standby e quando lo riaccendo non spunta niente va direttamente alla schermata e per di più ogni minuto si accende da solo. Spiegazioni? Grazie in anticipo .

    hai provato e tenere premuto per più secondi il tasto hold??perchè se lo tieni premuto per pcoo ti va in standby!

  • 2 problems, iPod nano battery depleted and not recognized by Windows, help!

    Earlier this morning. At first when I connected the usb to the computer I got the screen in the nano that said "apple.com/ipod/support" or something like that, with the folder/exclamation mark icon. It was charging but I disconnected it cause I had to go. I tried to do the same at night but this time is when it's totally dead, and not recognized at all. What can I do now?
    I havent used the nano in a while and the battery is depleted, so I tried to charge it but neither windows or itunes or the updater/restore recognize it.
    I'm on a laptop, I already tried most of the stuff in the faqs but it wont work.

    i kind of have the same porblem, my klaptop does regcognize the ipod on "my computer" but the iPod dosen't shows up in iTunes, and i have tried almost everything in the faq that show how to fix the problem, but it still dosen't work....

  • Recognition Problem, iPod Nano (2nd Generation)

    I am having problems syncing with iTunes:
    1.  There is no recognition from iTunes when the two are linked
    2.  The Nano content display, as a recognized device, is only:  Calendar, Contacts, and Notes.  The display on the Nano does not show these folders, but is much more extensive.
    3.  Also, I cannot transfer any of my music to the iTunes Library.
    So far, have uninstalled and installed:  iTunes, Apple Software, Apple Applications Support, and Quicktime.  The Window updates have been installed.
    Many thanks for any assistance. 

    Have you looked at this troubleshooting document? iPod missing in My Computer and in iTunes

  • Videos doesn't have sound on iPod Nano

    Ok, well whenever I convert my videos in iTunes using Advanced > Created iPod or iPhone version. The video converts, I play the video, and it doesn't work. It's like a mixure of colors, let's just say a black screen. And the sound doesn't work. But when I upload it into my iPod, the video works, sound doesn't. How do I fix that?

    Question wasn't answered, nobody answered it....

  • Stuttering sound on iPod nano

    Hello.
    My daughter (currently abroad) reported stuttering audio when using the iPod. Unfortunately I only have email contact so analysis is delayed.
    I suggested her resetting the iPod.
    Any other ideas?

    Besides just reseting it suggest she tries all the 5 R's
    http://docs.info.apple.com/article.html?artnum=303940
    http://www.apple.com/support/ipod/five_rs/
    GFF

  • Ipod Nano locked on iTunes

    http://i40.photobucket.com/albums/e205/simont13/***.jpg
    What happened is that it randomly locked my iPod Nano, I formatted it and now I can't put anything on it anymore, look at the picture please and tell me how I can fix my problem.
    iPod Nano   Windows XP  
      Windows XP  

    Welcome to Apple Discussions!
    That happens when your iPod is set to automatically update all songs and playlists or selected playlists.
    When iPods are set to manually manage songs and playlists, that lock goes away and you can drag the songs you want onto your iPod.
    To do that, connect your iPod to the computer. When it appears in iTunes go to edit-->preferences. Click the iPod tab, and then the Music tab under that. Click the bubble next to manually manage songs and playlists and click OK.
    See this for more info...
    Managing Your Songs Manually
    btabz

  • HT3310 i have a problem with the headset of my ipod nano 4th gen. the right side don't have a sound. It comes in and out.  what do I need to do?.. I am using the original headset eversince. I took it to an Apple Mac Center I was told they can't do anythin

      I have a problem with the headset of my ipod nano 4th gen. the right side don't have a sound. It comes in and out.  what do I need to do.. I am using the original headset eversince. I tool it to a Apple Mac Cennter and Taked with a Service Center Rep. And he told me that they can't do anything because they don't repair the ipod they didn;t even look at it. I was told instead to buy a new one. I was very disappointed.. This is already my 5th ipod though i am planning to buy a new one.. I still want it fixed so I can give it to my little sister

    From the OP: "My old computer got a virus and when that happened all my music was lost. "
    They don't have the music on their computer so they cannot transfer the iTunes folder, from the computer to their iPod and then to the new computer. And if they try to enable disk use on the iPod it will erase all the music that is on it. The method you cited is moving the files in a data format using the iPod as a flash drive. It doesn't work if they are in music format. That is why I suggested Yamipod.

  • IPod Nano sound problem with bass

    Hello,
    I bought an iPod Nano 4Go few days ago. I used to have previously a Sony HBM30 that was very good in sound quality and especially with bass.
    With the iPod nano, I should say that the sound is not as good as the sony especially for bass (saturation). I encode with VBR 256kbps in MP3. The sound is very poor if I put on the equalizer and there's no way of changing bass or treeble.
    So here are few questions :
    1/ Is there any tips to improve bass quality in order to avoid saturation ?
    2/ Is there any headphone that are better that Ipod ones for bass ?
    3/ Is there any firmware in the future that could improve sound and bass ?
    4/ Does Apple knows this problem ?
    Thanks for you help.
    Best regards

    Welcome to Apple Discussions!
    Keep in mind the headphones you may be using. How are the songs in iTunes? The question is whether the songs are being sent to the iPod with good quality. If you are pleased with the songs in iTunes, then first look at the headphones you are using. Are you using the white ones that come with the iPod? Those are not the best headphones as far as sound quality goes.
    Just looking for a few basic answers to those questions before trying to troubleshoot the iPod, iTunes, or the songs.
    Merry Christmas
    btabz

  • When i listened my music on my ipod nano 4th, It's sound like a used LPwith the distortion. I check my earphone and it's not the problem. I reset my ipod and it's still having the same problem. Does anybobody having a solution ?

    When i listened my music on my ipod nano 4th, It's sound like a used LP with the distortion. I check my earphone and it's not the problem. I reset my ipod and it's still having the same problem. Does anybobody having a solution ?

    From my limited knowledge the iPod Nano has no support for iCloud or wireless transfers- therefore the only means of downloading songs is by hooking it up to the computer by the white cable.

Maybe you are looking for

  • How to restore an iPhone from a previous backup using iTunes

    Hi all, I don't have a question - but merely a story of the solution I found to restore a previous backup from my wife's iPhone 5c that had some problems. Long story short, something got jammed with her Exchange email account settings and she lost al

  • Failed to install Hotfix 4311 for Microsoft SQL Server 2008 (KB2494094) (64-bit)

    I have a cluster install at SQL version 10.0.4272.  I want to upgrade this to 10.0.4311.  When I go through install on passive node it fails with message of "The patch installer has failed to update the shared features.  To determine the reason for f

  • How to write nested cursor for Adv. Collections dunning letter query

    I am trying to write a query for Advanced Collections duninng letters. Some accounts for this customer have invoices for more than one currency. In order to find all of the invoices this query works: select to_char(sysdate, 'MM/DD/YYYY') currsysdate,

  • Exchange rate should pick as per document date of GRN in MIGO

    Dear all, As per my client requirement while doing Material GRN in MIGO, system should fetch exchange rate as per Document date of the GRN. As per standard now it is picking from posting date. we already implemented Note number 574583. After implemen

  • Install gnome/kde/xfce to /usr?

    Why don't we just put everything into /usr? The /opt serves no purpose since all apps are installed/removed by pacman and not untar/rm. And where should you install an app that needs both of kde and gnome?? /opt/kde+gnome? The reasons people are agai