Sound problems after ios6

So i have upgraded to ios6, ever since i have no sound when playing music or videos, buttons or apps. Siri and ring tone stilll works but nothing else. The mute button is not on when i press the volume button it just comes up as "ringer" no up or down info. I have rebooted a few times, tried pulling the head phones in and out and it still is not working. I am currently restoring the phone so hopefully that will help. has anyone else experienced this??/

I had/have a similar problem. I upgraded a 4s the day ios 6 was released and had absolutely no issues. About 2 weeks later, i tried deleting music files that were duplicated from iTunes - this existed befoer the upgrade - and couldn't delete them all. I decided to retore the phone from a backup and during the restore, iTunes re-downloaded the ios6.0 update and re-applied it.
since then, my phone audio is too loud - causing a speaker rattle on the handset - and the volume buttons make no diference. they indicate that audio is going up or down but no change happens to the actual volume. music is fine, it's just call volume. using a headset doesn't exhibit the same problem.
After the restore, I also started getting the wifi problem where the iphone will not automatically connect to networks that it used to. there are 3 other iPhone 4s' in the house that have also been upgraded and they do NOT have the same problem.
After a couple of weeks of frsutration on this, i'm currently re-installing the phone/ios etc.

Similar Messages

Sound problems after export media in premiere pro cs6

hello,
i recently started usining premiere c6 and after exported my project to mpeg-dvd i noticed that sound quality is reasonably lost, than exported sound separatedly without video to wav and result was the same bad. The imported sound source was really good, recorded in studio- wav 24 bit 48000. Before i used cs3 and never had such a sound problem after export video.
thank you very much,
Poly

It's difficult to speculate without hearing the original and the export. Can you upload them?
https://www.depositfiles.com/en/

Sound problems with iOS6 upgrade

Recently, I have found myself without normal sound when the sound feature of the phone is turned on.
Sound I have: Call tone, sounds for setting up call ringtone.
Sounds I don't have: Music through speakers, video sound, text tone, keyboard tone, text tone when setting up message alert, connection sound for power supply.
These all work if I hook my phone up to AUX. The unmute is on, media volume is all the way up, and when I press the up botton on the side of the phone, it recognizes "ringtone" it just won't add the dashes to show my phone is getting turned up.
This is a VERY big pain being it's as if my phone is on silent at all times. Can anyone assist me with this? Have the same problem? Know how to fix?

I had the same thing happen to my iPhone 4s after ios6 upgrade!!!!!! This isnt right that we have to deal with these issues from Apple!!! With all the money that Apple pulls in you would think they would be able to come up with the right kind of software updates!!!! And if they cant dont come up with a new update (That we have to download or our apps,etc wont work right) that isnt going to work on ALL THE iPHONES!!!!! Not just the iPhone 5!!!!!!!!!!!! I hade to take mine to Verizon and they tried everything they new to try and it didnt fix it so they ordered me another one and I got a ST@#ID REFURBISHED 64g iPHONE!!!!!! When I bought mine brand new FULL RETAIL!!!!!! I just got it today and I guess it's messed up TOO!!!!! Because I can hear kind of a low static sound coming from the ear speaker when I put it up to my ear!!!!!!!!!!! I swear when I'm up for my upgrade I will NEVER GET ANOTHER APPLE PRODUCT AS LONG AS I LIVE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Iphone 4 audio problems after ios6 upgrade

I have problems after upgrade to IOS 6.
The sound mute and i can't up it.
It's the same behavior that appear at the next video:
http://www.youtube.com/watch?v=WZW5kcLyuHs

thejennshin wrote:
I recently upgraded my iphone 4 to ios6 on wifi. My laptop charger has been broken for a while so i havn't been able to sync my iphone to my itunes or back it up in any way. Now that the ios6 upgrade is done, my phone completely turned off and is now showing on the screen to plug in my phone to itunes.
DESPERATE, i am back on my laptop with a borrowed charger and i plugged my phone into itunes. It now says i have to restore it back to factory settings. Meaning, i will lose all of my contacts, pictures, etc. because i havn't been able to back it up onto my laptop.
I definitely don't want anything deleted off of my phone. Did any body else have this problem? Is there ANYTHING i can do to refrain from restoring it and losing all of my memory?
Couldn't you have backed it up to the "iCloud"? or some other cloud based storage before you did the upgrade? If you do not back things up before you upgrade your OS, you are only asking for things to go wrong.

Sound problems after iOS 4.2 upgrade

Experiencing very poor sound quality after iOS 4.2 upgrade. Bad eq, left channel dropping out, sounds like heavy reverb. Exists with iPod and pandora apps. Tried adjusting eq in settings. Any one else having problems?

Yep I just upgraded to new OS 4.2 on iPhone 4 and I get this static buzz sound when talking to people it's really annoying and sound quality is terrible. What happened? I went back to the shop and they said it's the upgrade and that there is an issue with it. They also said there is no point leaving the phone with them as they can't fix it that it's upto apple to release a patch for the problem. Can we get a fix for this soon before I damage my ears?

Pismo Sound Problems after Sleep in Tiger

Hi all. New to the forums and returning to Macs after years of cursing Bill Gates. Picked up a Powerbook Pismo from a friend and have been having some fun with it, but I have one problem I can't solve. I replaced the hard drive (saved the old one) and installed Tiger and 1GB of memory on the machine. All seemed well until I noticed that the sound would not work sometimes after sleeping. The sound will usually return with a reboot, but sometimes I'll have to actually turn the machine off, and clear the PRAM to get the sound to come back. Sometimes, the volume and screen controls will both not work at all (pop up doesn't even appear when the keys are pressed), sometimes it's just that the sound doesn't work, but everything looks right on the screen. I've also had the sound and screen buttons not work only to have pop ups suddenly appear and the adjustments happen several minutes after I pressed the keys. So far I've tried:
Clearing the PRAM
Checked the Pram Battery (ok)
Reinstalled Tiger (Still loses sound)
Downgraded to 10.3 (problem persists, and seems worse)
In system information on Tiger it says "there was an error when retrieving that information" when you click on the sound hardware.
The machine is a 500mhz Pismo with a 48gig drive and 1 gig of Memory (133mhz, would that cause this sort of problem?)
I have not tried going back to OS9 to see if the disappearing sound resolves as I don't currently have an OS9 disk.
This sure seems like a software problem, but I'm starting to wonder. I really like this machine and want to get it to work! Help!

Maxstang, welcome to Apple Discussions.
Did you repair permissions after you installed Tiger? Have you updated Tiger to 10.4.11?
Here's the Sound troubleshooting info in the Pismo Service Manual.
No sound from speaker(s)
1. Verify mute mode is not enabled (F6 on the keyboard).
2. Check the volume setting in the Sound control panel.
3. Verify no external speakers or headphones are plugged in.
4. Reset PRAM.
5. Make sure speaker cable is plugged into sound card.
6. Replace sound card.
7. Replace speakers (part of the top case).
8. Replace I/O logic board
Startup sound is heard, then no sound from speaker(s)
1. Remove sound preferences from System Folder, reset PRAM,
then restart.
2. Perform clean installation of system software.
Had the Pismo previously had OS X installed. There's a firmware update (Boot ROM version 4.1.8) that should be installed prior to installing OS X. However, when I got my Pismo with Tiger installed, the firmware was not updated (have since updated). However, I don't think this could be the cause of your problem, since I had no sound problems when the update was not installed.
The PC133 RAM (which runs at 100MHz) should not be the problem. I have PC133 RAM in my Pismo.
Since you replaced the HD, could you have disturbed the connection to the Sound Card. The Sound Card is located to the upper-right of the HD. Here's a helpful laptop site.
Fix It Guides for Mac Laptops & Mini
http://www.ifixit.com/Guide/
The guides can be viewed on-line or you can download a PDF file.
 Cheers, Tom
(='.'=)
(")_(")

Sound Problem After Installing iOS 8.1

Hello, after updating my iPad to iOS8.1 it started making weird noises, kind of the same ones you get while blocking it or getting a notification but with a little of a "robotic" twist. Restoring it seemed to had fix it until I tried to get the 8.1 again. I was just wondering if someone its having the same issue, and if so, whats the solution. Do you think that i'll be treated on the 8.2 version? I had the same problem with my iphone 4 once and couldnt get it sorted out.

I successfully got my iPhone 6 messages sound by following Timothy Holt directions.
Thanks Tim.
Timothy HoltNov 25, 2014 9:11 AM Re: iPhone 6 does not ring or make any sound notifications after installing iOS 8.1
Re: iPhone 6 does not ring or make any sound notifications after installing iOS 8.1in response to Jane1950
What you have to do, and this appears to be essential after you update the OS, is to reboot your phone.
1. Hold down the sleep/wake button and home button simultaneously.
2. Let go when the Apple logo appears and the iPhone is booting up.

Sound problems after system upgrade

I am having intermittent sound problems on my ipad2 after I upgraded to 6. When this occurs my volume control doesn't work. This problem occurs sometimes in the middle of playing a video.

hhhmm, thanks for the answer,
i reinstalled alsa-driver, run depmod -a & then try to load the modules & it doesn't work! i always get :
Can't locate module snd-pcm-oss
that happens with all the modules i try to load. & my modules are still in
/lib/modules/2.4.24/kernel/sound
is there a way i can load them from there or copy them somewhere else or i don't know what else.
thanks for the help though!
Shemeta

IMessage problems after iOS6 update

Hi All,
Is anyone getting similar problems to this after iOS6 updates?
My iPad is used on 2 wifi networks, my home network and work wifi, I pick the pad up on a morning, shove it in my bag, go to work and pick up the wifi there, carry on as normal, repeat in reverse when heading in the opposite direction.
On iOS5, my iMessages would simply carry on the conversation when rejoining either network *there is no 3g connection on this ipad*
Since updating, I leave for home, get to work and iMessage refuses to resume, messages stick at about 90% sent, then fail, I head home , rejoin the home network and boom, it just picks up where it left off
When at work, occasionally it might start working after 10 minutes or so, but today i've been sat about 5 hours so far, no dice
I have tried just about every combination of restarts, resets, updates I can think of, including, changing the DNS on my device to the same one I use at home *8.8.8.8* , shutting iMessage down, renewing the DHCP lease, Hard resets, soft resets , forget wifi network, restore network setting you name itI've tried it
Under iOS5 I had used the device for months without doing so much as a power down and not had one single 'not delivered' failure on an iMessage, since iOS6 I've probably had abotut 50% service from this.
As far as I know, nothing has changed on either wifi networks, everything else works fine on the works network, browings, itunes, app store, skype etc etc.
I'm at a loss as to what to do next, and yes, I've also done a full device restore as well for good measure, with a iCloud back up, again, it restored, went to messages and it just sat there doing nothing until I got home , where the messages just sent first go.
Massively frustrated in what I can only see as something that's been introduced as a result of this iOS6 upgrade.

I may have found my own answer... it seems that anything less than 3 bars of wifi signal after rejoining a network and the message wont send, I switched my device off, moved closer to the wifi router, tricky as it's in another building, rebooted, managed to get two bars of wifi, still wouldn't send, moved even closer to the router manged to just get 3 bars and pow, the message sent right away!
Moved away back to my normal desk at work, signal dropped to 2/1 bars of wifi, however now, messages continue to send now.
Clearly when I'm at home I'm only ever a few feet away from my wifi router and always have solid 3 bars of signal, not the case at work.
However, this still only appears to be something that's been introduced at the iOS6 update as this was never an issues prior to this, but has been an issue right from day one after updating!

Sound problems after upgrade to OS4

Good morning,
Anyone else who has sound problems while phoning after the upgrade to OS4? I have a 3Gs. Sound while phoning has been reduced to absolute minimum.

Same here as well - I have an iPhone 3GS and noticed this morning, when connected to my in-car bluetooth phone system, if I am running a iOS4 application like TomTom which is multi-tasking in the background, the sound quality is crackly, however if I kill the TomTom apps from the task manager, after a few seconds, sound quality is fine.
Starting up TomTom again, immediately reduces the sound qulaity back to crackling.
Not sure if the iOS4 or TomTom to blame.
If I used a the Speaker option, sound is fine. It appears that only bluetooth is affected.

Sound problems after upgrading to 7.1 and Pro

I have recently upgraded to Quicktime Pro and installed the 7.1 update, to create Podcasts at work. The only problem is now that non of my quicktimes will play sound. I have checked all volume control sections and mutes etc, its definitely a problem with the software. Also once a movie plays through, or if I try and use the play controls, other than initially pressing play, the player crashes and have to go to task manager to close it properly. The same occurs when you try and close the program.
I was going to uninstall and try again, but I was worried this might cause problems with the Quicktime Pro info.
Anyone else had these problems or have any advice.
pc amd 2.8 Windows 2000

I'm also having sound problems with Quicktime v7.1 Pro. If I play a .swf file in Quicktime, the video and audio play great. If I play an .avi file, the video plays but there is no sound. If I play a .mov created by Camtasia Studio using either the default compression or the H.264 compression format, the video plays but there is no sound. The graphic display indicates that the audio is present in all cases.
Is there an issue with this new version of Quicktime Pro v7.1?

Sound Problems After Installing Lion

I see many are having issues with sound after installing Lion. I have sound and then will lose sound after closing and reopening. I have to restart to restore sound. This is getting old quick. Does anyone know a fix or if one is coming? Thanks!

Not sure how much it helps, but here is my experience:
I have found that after a while, midi-style sounds stop playing. Most obvious to me is the crinkle tune when throwing away trash, or the click when placing something into the trash. When these sounds stop playing, I can still set the volume (and the up/down volume sounds will play) but the midi tracks don't start playing.
A while back I was hunting for a solution to this problem and rebooted and messed around, etc, etc. One person suggested changing the midi format since they knew there was a bug in the midi playback in Lion (a beta comment I think). So I used the Audio MIDI Setup application to change the Built-In Output format to 2ch-32bit float. For a while the sounds were back.
Just now, I noticed that they had disappeared again, so I went back to Audio MIDI Setup and changed it back to 2ch-24bit Integer. All of a sudden, a stream of old sounds started playing - presumably everything that had not been correctly played for a while.
Not sure if it will work again, but next time the sound vanishes, I will try to change the format again and report back what happens. My guess is that just changing the format will cause the queue to reset and play any old sounds. Then the sounds will work for a while until the bug is triggered again. Perhaps the workaround for now is to just keep flipping the Ouput MIDI format?

Sound problems after rendering

Hi,
Being that I have Premiere Pro 7.0, I am not too sure how much help I will get, but i was hoping that someone here could still help if all possible. Here is my problem. I thought I start practicing developing video lessons for 3d software. These lessons would be created using a screen captureing program, called camStudio. In my first lesson, my first try doing the entire lesson as one video, I found out that the video file size exceeded CamStudio's exporter file size allowance when trying to save out to Microsoft DV 1 AVI file. I then decided to split the lesson into 2, but final compose it as one video in Premiere Pro 7.0. Since the lesson was broken up into 2 screen captured videos, I thought it would make things easier if each screen captured video was in its own simulation. So, in other words, I have created 2 simulations in one project, and then I had nested both of them into the 3rd simulation. For example, simulation 1 was called lesson1 part a, and simulation 2 was named lesson1 part b, and the third simulation was called lesson1. Once I had everything setup, at first everything was working fine, meaing I could see the video and hear the sound tracks. However, after I choose to render the sequence using Microsoft DV11 AVI, I do not get any sound, and yet I made sure that the exporter exports both the video and audio. Furthermore, after rendering the project, going back to Premiere Pro's project, and pressing play, I get the error.... Disk Write Error: Verify drive connection, available disk space and disk access privileges
However, when I go inside simulation 1 or simulation 2, I still hear their sound tracks. One other thing I have noticed is that I get the sound back in the project if I move the orginal simulations into a new simulation. By doing that, I am then able to recover the project,. but if I choose to render again, the same process happens all over again.
Does anyone Have any ideas?
My Specs
Adobe Premiere Pro 7.0
Windows XP SP3
CPU 3.0GHz processor
RAM 512MB

so are you saying that the problem could be comming from how I did my recording with CamStudio? Not to change the subject, but you see, I am kind of lost. My goal is to provide some free video lessons. I was thinking my final encoded videos will be in DivX or XVid. CamStudio does offer users to compress to thise types of format. Howeveer, due to owning a very cheap microphone, those kinds that sit on your desktop, is causing me to have the biggest problem, since there is a good amount of background hissing noise in my recordings. So, I have been using both CamStudio for the screen capturing and Audacity to do the voice recording. Then in Audacity, I try my best of tuning up the voice and removing the background hissing noise. Once that is finished, I then need some sort of video editing software that allows me to put the video and my voice recodring together as well as splicing areas of the lesson where I stutter or slurr my speach a bit, which can be easily fixed in Adobe Premire Pro. However, my version of Premiere does not offer XVid or DivX encoding. I was thinking of using VirtualDub, but I really do not want to have 5 programs, just so that I can fix all of my problems, not to mention I have no $$$$ left. So is there a free better way?

Sound Problems after Flash 11.3 Update

This reply is to the post by Ortho_Fan, number 28, which references a Firefox forum and "Firefox Hates New Update." This thread is specifically about problems that Flash 11.3 is causing with Firefox but the problem isn't with Firefox, it is with Flash Player 11.3.
I have no sound with Firefox, Chrome or Safari. I do have sound with IE9 but some people do not.
See these and probably other threads:
No sound in flash
http://forums.adobe.com/message/4483563?tstart=0
Problem with sound after update
http://forums.adobe.com/message/4483038

I've branched this discussion into it's own thread, because the issue you're describing is different than the issue from the previous thread, which was related to a specific crash instance. We'd like to keep the threads focused on particular issues to help both investigate and collate the information coming in, and to aid in discovery for people that are experiencing similar issues. A single thread with a dozen issues is far less useful in either regard.
For the sound issue you're experiencing, I would recommend that you follow the advice in the threads you've referenced above.
Flash Player 11.3 included new sound enhancments to facilitate support for low-latency audio, to facilitate more repsonsive sound in complex Flash games. While we try to test a wide array of hardware, and conduct months of beta testing, it's impossible to hit every device, OS, browser and driver combination.
Please ensure that you have the lastet drivers installed for your sound card/chipset. If the problem persists, please post details of your configuration to that forum thread so that we can track down that hardware/driver combo and investigate the problem.
As a workaround, you may wish to roll back to Flash Player 10.3, until a new version is available. Flash Player 10.3 contains up-to-date security patches (we maintain one major version back for Enterprise), and will revert the sound change that is causing problems for you.
http://www.adobe.com/support/flashplayer/downloads.html
Thanks!

Sound problem after upgrading to 10.6.3

I'm not 100% sure, if this is related to 10.6.3 but it occured after upgrading today (as far as I remember).
I often use the headphone with my MacBook - and sometimes I use the normal speakers... it happened earlier, that my computer "forgot" that it has built-in speakers, but plugging in the headphone jack and removing it helped.
But today, after updating to 10.6.3. my MacBook refused to play sounds of movies etc. permanently. Changing the volume displays a "not available" sign, System Prefs don't now anything about built-in speakers.
Restarting the Mac plays the normal boot sound on these very speakers, but even repairing permissions or resetting the parameter ram didn't solve the issue.
I even recognized a red LED light shining out of the headphone socket for a few minutes...
Anyone expereincing the same problem? Or any idea what else I could try?
Cheers
Dirk

Hurray!! Solved!
The QTip was the solution. I couldn't see any dirt inside, and compressed air didn't help either. Also the first round or QTipping wasn't working - but then, gently turning and even more gently pressing turned out to be it.
A little grey color on the white cotton showed, that something definately was not right here. And now it works.
Thanks guys.
P.S. Even though I'm lucky to have one of three german Apple Stores nearby, I'm happy to not needing a new logic board..

Sound problems after ios6

Similar Messages

Maybe you are looking for