Sound Problems After Restore from Hibernate Using uswsusp and pm-utils

I see mention of using /etc/pm/config.d/module to recycle certain kernel modules during suspend. Do I need to suspend all modules?
**** List of PLAYBACK Hardware Devices ****
card 0: MID [HDA Intel MID], device 0: CS4206 Analog [CS4206 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: MID [HDA Intel MID], device 1: CS4206 Digital [CS4206 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
[aj@mbp62 ~]$ lsmod | grep snd
snd_hda_codec_cirrus 8790 1
snd_hda_intel 36904 1
snd_hda_codec 149633 2 snd_hda_intel,snd_hda_codec_cirrus
snd_hwdep 6340 1 snd_hda_codec
snd_pcm 77709 2 snd_hda_codec,snd_hda_intel
snd_page_alloc 7242 2 snd_pcm,snd_hda_intel
snd_timer 18726 1 snd_pcm
snd 59173 8 snd_hwdep,snd_timer,snd_pcm,snd_hda_codec,snd_hda_intel,snd_hda_codec_cirrus
soundcore 5450 1 snd
[aj@mbp62 ~]$ cat /etc/pm/config.d/module
SUSPEND_MODULES="bcma b43 snd_hda_intel"
SLEEP_MODULE=uswsusp
Any pointers?

This morning, I rebooted for half an hour without success:
After resume from hibernate, most of my machine froze like described above.
After first reboot, it worked for 1 minute, then I had a full freeze (nothing worked... no mouse, no normal keys, no magic keys, screen frozen...)
After second reboot, my wifi adapter was gone. It showed up in lspci and looked like this:
04:07.0 Network controller: Atheros Communications Inc. AR5416 Wireless Network Adapter [AR5008 802.11(a)bgn] (rev 01)
Subsystem: Atheros Communications Inc. Device 3071
Flags: 66MHz, medium devsel, IRQ 22
Memory at feb70000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [40] #80 [0000]
...but not in ifconfig. I found the following in dmesg:
[ 7.106070] ath: phy0: address test failed addr: 0x00008000 - wr:0x00080008 != rd:0x00000008
[ 7.106181] ath: phy0: Unable to initialize hardware; initialization status: -19
[ 7.106287] ath9k 0000:04:07.0: Failed to initialize device
Problem persisted over 10 poweroffs/reboots (also hit the "on" button a few times with the pwoer cable disconnected, trying to make it "reset" or something. Did not help this time, might have been coincidence the last time that worked.

Similar Messages

Web services problem after restoring from time machine!

I am getting this message every time i reload or log in to the wiki pages created on the snow leopard server after i have restored from time machine due to hard drive problems.
*The versions of the server and UI don’t match.*
*Try clicking Reload; if that doesn't work,*
*please make sure both server components are up-to-date.*
*Client: WikiServerUI-200*
*Server: WikiServerUI-198*
Anyone have a clue how to fix this issue?
I tried to restore/restart/update/....
Nothing worked....
Please elaborate as much as possible if you have any idea how to get rid of this nasty pop up every time you browse between pages or different wikis.
Million thanks in advance
cheers
/samer

I've the problem as well. When visiting my wiki-server I always get this popup message:
The versions of the server and UI don’t match. Try clicking Reload; if that doesn't work, please make sure both server components are up-to-date.
Client: WikiServerUI-198
Server: WikiServerUI-200
After a harddisk replacement I restored the server installation from TimeMachine back to the harddisk. From thereon I have the problem.
What is the problem exactly and how can I get rid off that message?
Thanx, Harold

Sound problem after waking from sleep

When I wake my computer from sleep the external speakers to do not produce sound. This is not related to the 'red light' issue, no red light is shining and in the sound control panel 'internal speakers' is showing.
Interesting is that when I play with the alert sounds in the control panel I can hear them, but when I adjust the volume or try to get sound out of software (iTunes, Quicktime, etc.) I can not hear anything. Also, when the computer is waking from sleep if I quickly toggle the volume control I get one or two 'clicks' before it goes silent. I have repaired the permissions according to other posts but that did not help.
However, if I plug in earphones and take them out again the volume works. . .
any suggestions?

Todd Sackett wrote:
Hi everyone, after waking from sleep, the first sound that is played is accompanied by a hissing sound for the first couple seconds. It does not happen after that at all that I have noticed. It comes out of either the speakers or headphones.
Can anyone try this: (Esp. if you have a new MB Penryn update (most recent))
1) Close lid, put to sleep.
2) Wait 5-10 mins
3) Open lid, log in to iChat (with login sound on) or make some other sound play. Listen for a hissing or static sound within the first couple seconds of whatever you just played.
Thanks for any help!
I don't observe this on my Napa-Revised Macbook

Problem after restoring from Time Machine.

So I just upgraded my imac with a new hard drive. I used a 500mg external drive for my backup. The Time Machine restore happened flawlessly. But now instead of TM backing up anything new from my computer, it wants to back up the entire hardrive (which I can't do, because I don't have enough space. So it seems like it's not recognizing the previous backups...make sense? Please help...

This is normal after you completely reinstall. If you don't have space on the backup drive then you will need to erase the backup drive (use Disk Utility) then allow TM to do a new full backup.
You need a backup drive that's at least twice the capacity of the drive in your computer if you use TM, otherwise eventually you will run out of space on the backup drive. When that happens you have to erase the drive or replace it with a larger drive.
For more help with TM you should read these User Tips at the top of the page.

Toshiba, No sound until after waking from hibernate/suspend

From the title my question is obvious. I have a Toshiba Satellite model L655-S5165
When I boot the machine there is NO sound at all unless I use the head phone jack,
but after hibernating or just closing the lid and waking it up then I have working sound out of the speakers
for various amounts of time until it stops working again. The head phone jack works all the time without fail.
Any Idea what may be going on here?
hardware info:
lsmod |grep snd
snd_hda_codec_hdmi 30162 1
snd_hda_codec_conexant 36759 1
snd_hda_intel 37000 7
snd_hda_codec 150305 3 snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_hda_intel
snd_hwdep 6340 1 snd_hda_codec
snd_pcm 77645 4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc 7242 2 snd_pcm,snd_hda_intel
snd_timer 18726 2 snd_pcm
snd 59109 19 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_pcm,snd_hda_codec,snd_hda_intel
soundcore 5450 1 snd
dmesg info:
dmesg |grep snd
[ 8.533173] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 8.550548] snd_hda_intel 0000:01:00.1: irq 44 for MSI/MSI-X
[ 3148.166409] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 3148.167780] snd_hda_intel 0000:01:00.1: irq 44 for MSI/MSI-X
And dmesg sound:
dmesg |grep sound
[ 8.550079] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 8.550223] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 8.688743] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20
If you need any more info let me know.
Any help or suggestions would be greatly appreciated!
Thanks in advance!
Last edited by jakebpg (2014-01-25 13:37:23)

When you say there is no sound, what applications have you tried?
Assuming that you have tried more than 3+ applications including iTunes, flash videos like youtube and some other applications. It might be a good idea to reset the PRAM and SMC
SMC RESET
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

Local snapshots not working in Lion after restore from TM

After some problems I must restore my MB Pro from TM backup (fresh Lion install and then restore from TM using User Migration tool).
From that point I can't get "local snapshot" working. Normal Time Machine backups are working OK (I must did new complet backup after restore) when I'm connected to my home network, but I can't see any local backups in "Star Wars" view. "Star Wars" view is not accessible when I'm not connected to my TM drive.
When I open /Volumes/MobileBackups folder in Finder, I can see MobileBackup volume mounted, but it have name coded in some hash (3lvtSzcL34......). Inside of this volume is standard /Backups.backupdb/[Computer Name]/.. structure, but with only one snapshot with date and time when I restored my MB Pro from backup.
I was looking online bud didn't find any info, how to get it wokrs again.
What I already tried?
- repair disk permissions - didn't help at all, only 5-8 permissions were wrong on some Java Library
- disabling and re-enabling TM - no change. After disabling TM, MobileBackups volume is unmounted, mounted again after enabling but with different hash name
- manualy turn local snapshots on/off - using tmutil enablelocal/disablelocal have same effect as above
Is there any way how to delete current MobileBackup volume so it can be created again?

Your best bet is to install iWork '09 the same way you did originally, if that was a download and install package or a disk. Once we got into the era of the App Store, things became more difficult. If that's the case for you, you could contact App Store support, I suppose, and see what they recommend.
If all else fails and having iWork '09 is really important to you, you could purchase a disk from Amazon at a very reasonable price.
Jerry

Super drive is not working after Restoring from Time Machine

well its pretty much the Subject actually, my imac giving me BlueScreen problem so i searched and posted question and the only Solution i got was to Re-install Leopard and i did that by using Leopard DVD and Restored my imac from Time Machine backup, But i got into new problem and now the TIME after restoring from the "Time Machine" my DVD ejecting EVERY CD,DVD etc. even the Leopard DVD which he reads happily.
I dont think its a hardware fault at all, but i'm not a "Genious". Any suggestion!

Issue solved with visit to Genius Bar.
As I understand it here are the steps the Genius did. Attempt to create the account (system preferences->users) with the same information. It will say it already exists. Very carefully read the options. One will say use the existing account. BE CAREFUL because one option will wipe your data.
If you need to do this it might be worth the trip to the Genius Bar as you could wipe your data. One precaution I took was to bring a full copy of that user account onto my desktop (from the backup immediately before the wipe) in addition to the one in the user folder. Once we verified that the account was working I moved the desktop copy to the trash and again verified the account (just to be safe).
Hope this helps someone else.

After restoring from backup on iCloud, my photos have been "downloading" for 2 days with no progress at all.

After restoring from backup on iCloud, my photos have been "downloading" for 2 days with no progress at all. Everything else seems to by fine, however. I have all my apps, contacts, even my photostream back, but my camera roll has said "downloading 137 of 1,345" for two days. I really don't want to have to start over as the whole process took almost 3 hours. Help?

Someone mentioned that syncing with ITunes, making sure that photos are being synced - even with an empty folder, fixed the problem. I tried it and it didn't work for me. Anyone got any answers that don't include losing the photos or erasing and restoring from backup again?

Problems after resuming from hibernation

I’ve been getting horizontal lines and sound distortion after resuming from hibernation. Has anyone had similar problems or found a solution for this yet? I’m on Lion OS X 10.7.3.

Rorschach wrote:What freezes? Just X or the whole kernel? Can you ssh to your machine?
Now it doesn't freeze anymore. I really don't know what the heck is going on on my machine.
Next time that the machine freezes I'll try to ssh to it. Thank you for pointing this out.
Last edited by ArchArael (2010-03-26 15:56:17)

Sound problems after export media in premiere pro cs6

hello,
i recently started usining premiere c6 and after exported my project to mpeg-dvd i noticed that sound quality is reasonably lost, than exported sound separatedly without video to wav and result was the same bad. The imported sound source was really good, recorded in studio- wav 24 bit 48000. Before i used cs3 and never had such a sound problem after export video.
thank you very much,
Poly

It's difficult to speculate without hearing the original and the export. Can you upload them?
https://www.depositfiles.com/en/

Problems after updating from Mavericks to Yosemite.

Hello everyone.I have noticed some battery problems after updating from Mavericks to Yosemite like no charging at all (but the orange led was on )and not able to fully charged.I solve them with SMC reset and PRAM reset.Furthermore, battery discharges faster than before and its really annoying.Now I have notice that the upper right corner of my mac is getting hot.I'll appreciate any help
MacBook Pro (Retina, 13-inch, Late 2013

Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.
5. Reinstall Yosemite from Scratch:
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.

After restoring from backup on a new phone (same model, just replacement) all my apps are showing as waiting....I have sync'd but still without any joy - this has been going on for hours

After restoring from backup on a new phone (same model, just replacement) all my apps are showing as waiting....I have sync'd but still without any joy - this has been going on for hours

It just means some spammer is using your email address as the sender address for their spam. This is very easy to do - anyone can do it simply by changing the From email address in their email program. It does not mean your account was hacked or you have a virus (there are no current Mac viruses on the loose anyway, nor has there been for years).
There's nothing you can do about it. It can happen to anyone and the spammers will move on to using someone else's email address before long.

How can I see my messages after restoring from backup?

I have 2.1gb of messages saved in my storage on my 4s but they're not in messages after restoring from backup.
How can I get all my messages back in my message app because I know they're their it's just a matter of getting them restored into the app.

When you restored your phone from an old backup, it wiped ALL data from your phone and replaced it with the data from that backup. It's like your phone went back in time.
Your data that was on the phone before you did the restore is now gone forever. There is no way to get these data back.

I know that iCloud backs-up apps and other stuff to your phone incase you want restore from a back-up if you start a New iPhone. My question is if I start a new iPhone (not use the restore from back-up option) and redownload apps like (games, Instagram),

I know that iCloud backs-up apps and other stuff to your phone incase you want restore from a back-up if you start a New iPhone. My question is if I start a new iPhone (not use the restore from back-up option) and redownload apps like (Games, Instagram), would my pics show up on Instagram and would my Games show it was saved and the acccomplisments will remain from the last place I left out.

Davin12 wrote:
I know that iCloud backs-up apps and other stuff to your phone incase you want restore from a back-up if you start a New iPhone. My question is if I start a new iPhone (not use the restore from back-up option) and redownload apps like (Games, Instagram), would my pics show up on Instagram and would my Games show it was saved and the acccomplisments will remain from the last place I left out.
Icloud or itunes backup, only backs up app data, not the app itself.
so if you restore as new, then there is no app data on your phone, you start out new...

I upgraded to ios6 on ipod touch and after I completed a sync on my PC but I suppose it did not sync, because now it will not restore from a back up and wants to restore from another account that I have saved. Can I some how restore from the apps?

I upgraded to ios6.1.3 on ipod touch and after I completed a sync on my PC but I suppose it did not sync, because now it will not restore from a back up and wants to restore from another account that I have saved. Can I some how restore the apps to avoid having to pay for them again and having to recreate settings?

As I said, the backup that iTunes makes does not include apps (and music) if those items where not in the iTunes library on the computer on which you restored they will not be on the iPod.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Sound Problems After Restore from Hibernate Using uswsusp and pm-utils

Similar Messages

Maybe you are looking for