Sound problems during transitions?

Ok, i'm attempting to add a transition between a clip of some Talent Show MCs talking(I'm trying to cut out while they are saying something) right to a person singing, in then middle of a song. The sound is giving me issues, as the MCs keep talking while the singer starts singing, how do i make the sound during the transitions stop?
Thanks.
Once the video stops, the audio keeps going, how do i fix it? That's what i need to know...i think.
Message was edited by: Chanciffer

I had the same problem - I couldn't figure out how to turn off the sound during transitions, and it was annoying because I had cut my clips exactly where I wanted the sound to end, but the transition does a fade-out with the clip before the transition, and a fade-in with the next clip, so it was adding additional audio that I did not want!
Here's my work-around:
(1) Take the clip before the transition, and cut it exactly where you want the sound to end.
(2) Right click and select "Detach Audio."
(3) Extend the length of the video clip (at the end) a little for better video during the transition.
(4) Take the clip after the transition, and cut it exactly where you want the sound to start.
(5) Right click and select "Detach Audio."
(6) Extend the length of the video clip (at the beginning) a little bit for better video during the transition.
Now there will be no sound during the transition, the audio will be perfect, and the transition will look smooth.
If someone knows an easier way to turn off the sound during a transition, please post it here. If not, I hope these instructions help!

Similar Messages

  • How can I fix no sound problem during calls since I have upgraded iphone 4 to ios 7?

    Hi friends
    Since I have upgraded my iphone 4 to ios 7, I am practicing too much problems regarding to sound:
    - playing music has no sound at the same time no sound in during phone calls unless I open the speaker.
    - sometimes sound in music and phone calls comes back for short period and then same problem occuring again.
    I think and I beleave it is software problem and I feel that ios 7 have killed my iphone.
    any one has any idea how to solve the problem or downgrading  back to ios6

    Try a reset: hold down the home button along with the power button until you see the Apple, then let go.

  • Sound problem during play-back

    Dear friends
    After recording images with my MSI TV-Tuner card, i cant get any sound during play back. First i had Win-Amp installed on my system that i thought may be it is the cause of the problem. After uninstalling the win amp, again the problem existed. Even i have installed the Beta version driver of my MSI tv tuner but i hadn't any success in solving the problem .
    If somone can help me to solve this i will be appreciated.

    make sure you have the recording input set correctly in your settings (look under Device options)
    however your tv tuner is connected to your soundcard (eg Line-IN) then this should be set accordingly

  • Sound Problems [Jumpy Transitions]

    It was recently my birthday, so to remember the special day I taped my party on my friend's DV Camcorder. I have been editing it in iMovie for the last few days, adding transitions, applying the soundtrack and cutting out the bits which had me dancing horrendously! I finished it last night and left it till this morning to pop onto iDVD to add a menu.
    I jazzed it up and added my flashy menus etc and clicked 'Burn'. Then I waited for the DVD (It took it's time!). When it finished I went downstairs and popped it into my DVD Player. All was fine, the menus working correctly and it looked great! Then I clicked 'Play movie'....
    It started off with my little intro and that's where the problems began. The trouble is that the soundtrack transition was really jumpy. I had some music in the background of the intro which then fades out as the party sounds fade in. Here, the music gets really messed up and plays incorrectly. The video is not altered in any way though. This happens in quite a few other transitions aswell and also when the music just fades out. I checked to see if iMovie was the culprit but when I watched it on there it was fine. I then changed the soundtrack so that there was no overlapping of tracks (i.e. the track after waits until the first track has faded out before starting), but still the same problem at the end.
    As I last resort, I then tried to just save the video as a file then burn it to DVD, thus bypassing iDVD. Still the same problem.
    I'm really at a loss as to what to do. I need to sort it out soon as my friends keep pestering me to see it!
    Also, please feel free to ask questions as I may have missed out a core piece of information unwittingly!
    Any Ideas?

    Although stuttering and jerkiness occurs in both PAL and NTSCtype projects, PAL projects seem to have unique issues with audio.
    http://discussions.apple.com/thread.jspa?messageID=2010839&#2010839
    In PAL projects, audio fades sometimes return to a high volume as they end. It's been a particularly nasty problem for it only appears when the project is exported; the iMovie playback is fine so the problem jumps up to bite you when you least expect it.
    One solution that seems to work is to use third-party software to capture the audio played in iMovie, then import THAT audio file to the project and mute the problematic audio tracks. Software to do that includes Snapz Pro X, Audio Hijack, and WireTap.
    It also may help to improve the quality of songs you import iMovie from iTunes. Burning the songs to Audio CD seems to help. If your problem involves only stuttering and such, that's the solution I'd try first. I'm beginning to suspect this step might avoid lots of problems later in the project.
    http://discussions.apple.com/thread.jspa?messageID=2206508&#2206508
    Karl

  • Sound problem during render from iMovie to iDVD

    I created an iMovie project that plays beautifully on my iMac G5 with OS X v 10.4.5.
    When it comes time to create a DVD project, iMovie tells me that because of two slow motion scenes, that "rendering" has to be performed.
    Within iDVD, the video plays fine. But the sound is warbled and slow (though in the correct key) throughout.
    I closed iDVD, iMovie, rebooted, and tried to create another iDVD, but the same thing occurred.
    Is there a way I can salvage this project?

    Hi, Paul,
    iMovie 'renders' slo-mo in a way that you don't really want--as you discovered. So, get your movie into iDVD without letting iMovie render it. Try doing it this way:
    Instead of sending your iMovie to iDVD from within iMovie, close iMovie.
    Open iDVD, and create a new project. Click on the 'custom' button, and navigate to the 'Media' tab. Select 'Movies' and find your iMovie in the little window. Drag it onto the iDVD screen. Be sure not to put it into a drop zone. Then, make the titles and buttons the way you wish.
    Save the DVD as disk image. You can play that after it is finished to see if the sound is what you want. If so, go ahead and burn your DVD.
    Hope this helps!!

  • Sound problem + high temperature

    I own phone
    sony xperia z1
    Since the update the phone to Android 5.0.2 system and I have two problems, namelyFirst / chopping sound problem during normal call ... the other party does not hear my voice clearly
    Note that the sound is excellent and there are no any problems when talking across other applications such as Alaska Bi skype or viber
    The second problem, a phone degree temperature rise significantly and unnatural when surf the Internet or watch a video over phone
    I hope to help me

    Hi AhmedAbdeen & RobinZ1, welcome to the community!
    I agree with @Uliwooly - here are some additional instructions on running the actual repair: 
    (Note: A software repair will delete all user data, to back up your data before the repair on a mac just click on Backup my Xperia device and follow the on-screen instructions and on a PC just click Start under Backup & Restore and follow on screen instructions). 
    Running the software repair on PC Companion:
    1. Install and open PC Companion then select Support Zone.
    2. Phone Software Update.
    3. Start.
    4. Repair Phone
    5. Continue
    6. Accept data removal
    7. Next
    8. Wait for prepare
    9. Select Phone
    10. Follow the connection steps
    Running the software repair on Bridge for Mac:
    1. Launch Bridge for MAC without the handset connected.
    2. On the Main Window select "Xperia > Repair Xperia Device".
    3. Ensure the phone is charged and select "Ok" in the following window.
    4. Select Continue on the following page.
    5. Wait until the initialising step is finished the continue as below.
    6 . Select your model of phone from the list that appears
    7. Follow the connection steps that appear, ensuring that you are holding the relevant button down before during and after the connection phase until the update/repair begins.
    Hope this helps! Keep us updated. 

  • IMovie 6 transition sound problem - transposed soundtracks? Any solution?

    Hello,
         I can see that this problem has been discussed many times, and I am getting by using some of the suggested "work-arounds", but I was just wondering if there have been any actual solutions to this problem?  I never had this problem before, and I don't exactly know when it started, but it is VERY ANNOYING!  I have iMovie6 and a 2.4 GHz iMac with an Intel Core 2 Duo.  I am still using Leapard, OS version 10.5.8 simply because it seems to work fine, and I haven't needed any of the newer features.  However, if this transition issue would be corrected with an upgrade, I would gladly upgrade!  Has anyone found a solution for this transition sound problem?
    Thanks,
    Lincoln

    Lincoln
    Like you I find this very annoying .
    For me "extracting audio" sometimes results in the audio becomming out of sync with the video, also doing the "update" mentioned above does not fix it for me; I must be doing something wrong?
    Having opened iMovie 6 to try "update " fix and failed I started to try a few things.I think I have found a solution that works.
    The following sounds complicated, but is not; reading twice is recommended
    Most of us apply a string of transitions from left to right i.e. between clip 1 and 2 then between 2 and 3 then 3 and 4 and so on. The audio glitch will occur in say transition 2/3 because there is a transition immediately before it in 1/2 and likewise a glitch in 3/4 because of the transition immediately before in 2/3 .
    I find you do not get a transition audio glitch between 2 clips if there is no transition immediately before.
    So the simple solution is having sorted all your clips and edited, apply the transitions in reverse direction i.e. from the end of the movie working towards the beginning; transition between clip 39/40 then 38/39, 37/38 and so on down to 2/1.
    If you do not want to start at clip 40 for some reason you can say do (assuming you want all clips to have transitions) clips 5 down to 1, then say 15 down to 10, then say 10 down to 5 etc etc.  But you will notice that when you do clip 5/6 in this scenario you already have a transition for 4/5 so you will get an audio glitch for 5/6.
    The solution here before doing transition 5/6 is to split video at playhead  somewhere in clip 5 so that there is a break in the transitions but no interuption in the video.
    If you are able to apply transitions in one session then working backwards from the end  is the easiest solution and takes no longer than any other method.
    If you have to do it in segments still work backwards but spit clip at playhead as above when approaching an already applied transition in order to create a "transition  break".
    Alternatively a quick and dirty way might be to split every clip in 2  before applying transitions and apply the transitions anywhere except at the splits.This way you should not have to worry what order or direction you apply them in.
    If you try this let me know how you get on.

  • How do I get facetime on a MacBook Pro to work?  I keep getting a " server encountered problem during registration.." message.  I have FaceTime ver. 1.1.1

    How do I get facetime on a MacBook Pro to work?  I keep getting a " server encountered problem during registration.." message.  I have FaceTime ver. 1.1.1
    Thanks

    Icapper wrote:
    I will end up getting something other than Logitech speakers, since I'm just weird like that.
    Your not weird, your a audiophile.
    https://en.wikipedia.org/wiki/Audiophile
    Good sound costs money. And with a 5.1 system your usually doing surround sound decoding for BlueRay movies etc. for home theater purposes.
    The PC 5.1 surround sound systems require a audio card in a PC tower and mainly used for playing 3D games so that won't work for any Mac at all. So don't buy a PC 5.1 surround sound system for your Mac.
    Harmon Kardon has the GoPlay, it's a portable stereo with awesome sound (not as good as their theater systems) and you can hook up a analog male/male stereo mini cable to it from the Mac.
    $200 and it has a iPod dock and also takes like 8 batteries so it's portable.
    http://www.amazon.com/dp/B002GHBTNC
    There is also the Bose Wave clock/radio, you will need a stereo mini to RCA break out cable for that.
    http://www.bose.com/controller?url=/shop_online/wave_systems/index.jsp
    The GoPlay has much better sound than the Bose, I think the Bose are overpriced.

  • Sound stops during games

    Randomly my sounds stops during most of my games.  Clash of clans my sound will fade in and out like its trying to work properly, but other apps are just muted completely.  If im listening to music while playing a game, it seems to happen more often.  ALL sound is stopped, i have to exit my app to turn the music back on.  This happened after i synced some music.  It was TERRIBLE, but i managed to sync it 3 or 4 more times to try and correct the problem, it helped but didnt fix it.  One day my sound wouldnt even adjust.  Something is seriously wrong with this OS.  This has been a problem since iOS7.  And i was syncing my wifes new Justin Timberlake, apparently the iPod hates him as much as i do.

    NoSound problem with headphones? With speaker?
    If only with headphones have you tried another pair of headphones?
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                      

  • Sound stops during automation recording.

    Alright here's a video example of what I'm talking about.
    When I'm doing a "Touch" Automation on one midi track, while recording a touch track the midi sound stops as soon as I move the slider.
    The automation still records, it's just that the sound stops during automation.
    In the video notice that as soon as i move the Volume Automation slider the midi playing
    stops. Why? I need to be able to monitor this while I'm adjusting the automation.
    Appreciate anyone's suggestions.
    It's Logic Express 8.0.2 by the way.
    http://s177.photobucket.com/albums/w238/perrycomo/?action=view&current=Example1. mp4

    NoSound problem with headphones? With speaker?
    If only with headphones have you tried another pair of headphones?
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                      

  • Sound Problem Plus Memory Problem

    I've also posted this same issue at the EVGA website with no help what so ever yet. Also if it's ok I'm having the above mentioned memory problem that it probable not related but if anyone does have good input I would love to hear. Hope this doesn't break any rules, didn't see anything in the listed rules thread. So here it goes.
    Ok I'm having a few minor but very perplexing and annoying problems. I have recently built a new rig to include the following.
    Windows 7 64 bit Home Edition
    EVGA P55 FTW Intel P55 Socket LGA56
    Intel Core i5-750 2.66Ghz 8M LGA56 CPU
    Corsair Dominator 4GB DDR3 PC2800 (2 x 2 GB sticks)
    Ultra LSP750 750w Power Supply
    Seagate TB Serial ATA HD 7200/32MB
    Cooler Master HAF 932 Full Tower Black Case
    Galaxy GeForce GTS 250 52MB PCIe x2 (SLI Setup)
    BFG - NVIDIA GeForce 9800 GT GB GDDR3 PCI Express Graphics Card (Physx Setup)
    PROBLEM ONE:
    This one I had a lot less that I was able to actually try because it just confused the crap out of me. So I started by going to test my sound. I'm running an optical cable from the on board sound port to back of my sony surround sound system. I get sound from my left and right channel but nothing from the center, rears or sub. So figure no biggie just need to change the configuration from 2 speaker stereo to 5. surround sound. Guess what... the option isn't there? WTF? A sound card with an optical port with no 5. support? So went online found the drivers for the sound on the mother board and tried reinstalling thinking maybe somthing was wrong with the drivers on the CD. Well it still didn't work. So I figured what ever, I got an external sound card that I know works with Windows 7 since it was on other desktop and hooked it up. Its a Creative - Sound Blaster X-Fi Surround 5. External USB Sound Card. Well it installs fine and I go to test it. Yep you guessed it! Still only sound from the left channel and the right channel with no option for surround sound. So I was able to find updated drivers for that and ran em. Well now I have an option for Surround sound with side speakers only no rear. Oh but it doesn't really matter because the left and right channel are still the only ones able to produce sound. And yes the speakers work I turned on my X-Box 360 hooked up to the same speakers and LCD tv and played COD4 with full sound working fine. So something else has to be happening I just have no idea.
    PROBLEM TWO:
    The second problem was with the memory. Everything booted fine but it initial only detected 2 GB. By the way I had them installed in slots and 3. So I shut down and popped em out checked the copper connectors everything looked fine and reseated the chi
    ps.
    This time during the boot up I checked the BIOS. It saw all 4 GBs of memory. Continued into Windows. Windows now saw all 4 but only .99 GB was available. Now the only other time I've seen anything like this was with on board video sharing the memory, and even then it wasn't half of the systems total memory. I then tried shutting down and putting the chips in 2 and 4 just see what would happen. Well I got an EA post error on the LED, couldn't even boot. So I figured o'well power down completely and tried to run the memory in 2 and 3 to run it out of dual channel. I was able to boot but still had the same issue. .99 GB available and still saw all 4. At this point it was just getting silly so I figured ok I'll download the new BIOS with my laptop, burned it to a CD. Booted the desktop and ran the BIOS flash. Update seemed work fine, honestly the BIOS didn't look much different and I didn't take note of the previous version before I did it so I can only assume it worked. However it did not fix my problem. So I'm still stuck at windows seeing 4 GB of memory with only .99 available.
    Anyway... I'll keep trying to get this working and hunting around online, but I'm really hoping you all have some ideas. I'll be trying to call EVGA today for some help too and possibly Corsair. Thanks in advance for the help!

    Hello,
    cannot help with the sound problem.
    For memory, I've got almost the same thing but with 4 sticks of 2gb and only 2 detected on an ASUS P7P55D deluxe.
    Bios was my issue but I needed to do this (but with pairs of sticks instead of sticks) after the bios update to finally get my 8gb under windows:
    Make a clear cmos. Then boot the computer with only one stick of ram in the port .
    If everything is fine, turn off and add the other port of the same color for dual channel.
    If it does not boot with the 2 sticks in the port of the good color, try to switch ports again. Maybe one stick is dead?

  • Intermittent sound problems on MacBook Pro.

    I have for the last few months had this intemittent sound problem. The speaker greys out and the sound 'jumps' between speaker and internal sound. The little red light inside the headphone port comes on. This could last for a few minutes and then everything is fine again. It happens when I play DVD's as well. The sound goes and the DVD practically stops playing or the picture is slowed down and jerky. Usually after ejecting the DVD and inserting it again it sorts the problem out. It used to not happen very often but for the last two days it has happened at least 5 times. It happened during a presentation once and I need this to work. Any advice please.  I am worried it could be a hardware issue. 

    I have for the last few months had this intemittent sound problem. The speaker greys out and the sound 'jumps' between speaker and internal sound. The little red light inside the headphone port comes on. This could last for a few minutes and then everything is fine again. It happens when I play DVD's as well. The sound goes and the DVD practically stops playing or the picture is slowed down and jerky. Usually after ejecting the DVD and inserting it again it sorts the problem out. It used to not happen very often but for the last two days it has happened at least 5 times. It happened during a presentation once and I need this to work. Any advice please.  I am worried it could be a hardware issue. 

  • Static during transitions

    I am experiencing static during transitions and have read a lot of posts that complain about similar issues. I have also read that cross-dissolves are particularly prone to this problem, and that is my typical transition of choice. (I would assume that the cross-dissolve is one of the most common transition effects for most people.)
    As others have reported, sometimes extracting the audio (as Apple suggests) seems to work, and sometimes it does not. In addition, having a lot of extracted audio really slows down the performance of iMovie on my older Mac and leads to some strange behavior that makes me think my project will get irreversibly corrupted.
    I found it strange, though, that the static happened during some transitions, and not others. Then, I noticed that I was getting sustained static for the entire length of certain clips to which I had applied an effect. Again, only some of the clips to which I had applied the effect had the static, and not all of them.
    Then, I think I figured out why only some transitions and clips had the problem. It seems that when I initiated a SINGLE transition (or an effect on a SINGLE clip), and I allowed that SINGLE transition (or effect) to finish rendering before initiating another, there was no static. However, if I initiated cross-dissolve transitions on MULTIPLE clips (or effects on MULTIPLE clips) such that they rendered SIMULTANEOUSLY, then I was far more likely to get static.
    I found it very convenient to simultaneously apply cross-dissolves across many clips in my projects, and it takes a lot more user interaction to apply them separately, but it is worth it in the long run to avoid having to extract and/or mute audio at multiple transitions, and then suffer the resulting performance hit to iMovie.
    Perhaps this is more of an issue when you have an older (slower) Mac like mine, or perhaps I am crazy, and it was just a coincidence that when I applied SINGLE transitions (or effects) that I did not get static. Perhaps some of you who have had this problem can try this workaround to see if it works and reply to this message. (Note that there may be different issues to which this does not apply. For example, I have seen reports of a single pop at transitions from still frames. I'm not sure whether that is the same problem.)
    I seem to recall posting a similar message on the iMovie forum quite awhile ago, but it has long since been deleted. Stupidly, I forgot my own workaround and just had a similar problem with a new project, and I had to rediscover the workaround with an eerie feeling of deja vu.
    It is amazing to me that something this important and basic to the functionality of iMovie has not been fixed over the multiple years since iMovie 3. If others can confirm this workaround, perhaps Apple can get a better idea of why it is happening.

    Hello: I am having the same problem with a movie, rendered transition to a still image. Nothing fancy, and yet the entire transition is filled with static. I have tried two different transitions to no avail. The static is also in the exported Quicktime movie. so it is not something that shows up in the iMovie preview.

  • IOS 5 sound problem on iphone 4

    upgraded my Iphone4 to ios5
    Now, I have a strange problem, and I don't know if the cause is an ios5's bug or if it is material problem.
    I restored many times the ios5, but it doesn't fix the pb.
    Here is the description :
    - the slider volume bar has disappeared. ==> No sound in applications, music, games...
    (the + and - buttons make the volume icon appear, but the slider is empty)
    - But the phone rings when I receive a call.
    - I can hear/change the ring tones in the sound menu (the + and - buttons work)
    - But the message/mail don't ring , and I can't hear them in the sound menu
    - During a phone call, if I put the conversation on speakers ==> it works and the volume bar reappears. I can control the volume with + and - buttons.
    But when the conversation is over, the bar disappears again.
    - With the headphones, everything is ok!
    - I also noticed (only a few times) that when I do a repring (with changing the language of the phone), the volume slider reappears and works correctly during 2 or 3 seconds, before disappearing again.
    This tip is not reproductible anymore... I don't know why...!
    I guess that it is a ios5 problem, because the speakers work.
    Thanks from australia

    After updateing ISO 5.1 my problem is the same. pls help anyone.................
    upgraded my Iphone4 to ios5
    Now, I have a strange problem, and I don't know if the cause is an ios5's bug or if it is material problem.
    I restored many times the ios5, but it doesn't fix the pb.
    Here is the description :
    - the slider volume bar has disappeared. ==> No sound in applications, music, games...
    (the + and - buttons make the volume icon appear, but the slider is empty)
    - But the phone rings when I receive a call.
    - I can hear/change the ring tones in the sound menu (the + and - buttons work)
    - But the message/mail don't ring , and I can't hear them in the sound menu
    - During a phone call, if I put the conversation on speakers ==> it works and the volume bar reappears. I can control the volume with + and - buttons.
    But when the conversation is over, the bar disappears again.
    - With the headphones, everything is ok!
    - I also noticed (only a few times) that when I do a repring (with changing the language of the phone), the volume slider reappears and works correctly during 2 or 3 seconds, before disappearing again.
    This tip is not reproductible anymore... I don't know why...!
    I guess that it is a ios5 problem, because the speakers work.

  • When Should I Correct The Sound Problems?

    I have a set of interview clips in an iMovie '08 project. Originally the video was recorded with two mikes, with one mike on each channel ( L and R). Unfortunately, on some of them, the mike level for one of my interviewees is much lower than for the other, which I need to correct. I also want to put the sound from both mikes onto both the L and R channels, instead of one on each channel.
    I have done all my splitting and transitions and titles all that stuff, and am ready to export the clips into a final movie. However, I need to sort out the sound problems.
    So - my question is this: is it better to fix the sound in iMovie '08 first, before exporting - and if so - what the best way to do this? Or should I export the movie, and if so, into what format, and how would I then edit the sound? I do own Final Cut Express but have never used it.
    Or... is there a better way than these [e.g. exporting into some other program BEFORE compiling into a final movie, and then bringing back into iMovie '08]?
    Thanks!
    Message was edited by: gbracegirdle

    Kanan, the difference you already know, blade .vs rack mount. There are some CPU differences, but not much. Both can be managed by UCSM in version 1.4.x
    So it really is ones preference on what you are using it for and how scalable you want things to be for future expansion.
    Blades: easy, as you can buy a chassis and have 2 blades in that one chassis and add blades as needed. If using boot from San, can get a server back up in minutes
    Rack mount: can take rack space more quickly, takes time to duplicate in case of a failed server
    Very small differences, but hope this helps to start the wheels turning.
    Good Luck!
    Sent from Cisco Technical Support iPhone App

Maybe you are looking for