Sound problems with film made in iMovie when burned to DVD in iDVD

PLEASE HELP!!!
I have upgraded to iLife 09 and for all the bad that people have to say, I actually like it a lot. Anyway, it gave me the encouragement I needed to play with some old home movies I had stored with the aim of producing DVDs to give to my friends, and hopefully showing off the slick production values I have come up with.
So after spending a week getting to grips with iMovie and editing an old holiday film with all the cuts, transitions, chapter markers and music etc that I wanted, I ended up with an hour long movie that I was happy with.
Then to iDVD. After trying out all sorts of ways to go from iMovie to iDVD to ensure the best quality, I have finally given up trying to replicate the on screen quality of the movie in iMovie with the finished DVD, and just opted for the easy to use 'share to iDVD' option. The quality is not great, but then the footage is old anyway so not too much of an issue.
Then I spend another few days playing with and learning iDVD and again end up with a finished product that I am happy with, with nice looking menu's and a slideshow etc.
So I come to burn the final DVD, for which I pick the 'Professional burn' option which takes 4 hours but I am happy to wait if it means the best quality possible, and my DVD is done.
I then play the DVD to discover my problem - the sound in the movie is not right. To explain further, in my movie I have reduced the sound of some of the film clips to nothing and placed music over the top. When played and previewed in iMovie it works fine - the music plays and the sound that is attached the the video does not. When previewed in iDVD it works fine - just as I had edited it in iMovie. But then when I burn the DVD, some of these sounds are present again which completely wastes all my hard work at the editing stage.
I have searched and searched for help on this but am unable to find any.
Sorry for the very long description and story behind my issue, but it is massively frustrating. Basically, at some point during the 'burn to DVD' stage in iDVD it decides to completely ignore most of the sound edits I have made on the movie in iMovie.
If anyone can help it would be much appreciated.
Many thanks in advance.

Many thanks. Looking at that thread it looks like there are a few others having the same issue as me. Might be to do with not using the predetermined rates for clip slowdown and inputting my own.
The frustrating thing is that I have only done this once right at the start of my hour long movie and if I change it now it with though the timing of my whole film out.
Not much else I can do though I suppose.

Similar Messages

When Burning a DVD from IDVD it does not encode Video

I am having trouble burning a DVD that will not freeze. All of them come out and are read by DVD players of all kinds, but it gets about 3 minutes into the video, and it freezes. I saved as Image to Disk, and it went through the Burning process flawlessly and played through in its entire contents, but then when I tried to burn it to a DVD, it made the menus fine, but when it came to encoding the video, it skipped that part and went straight to encoding audio and it did not work. It came out with just a little video on there, but it did not use the same process as the Save Disc to Image did. When I saved Disc to Image it played through the whole project in kind of a slow motion. The Burning to a DVD did not do that at all.
Please HELP!

I do not have 20gb free on my start up drive. I will once I delete the bulk of the project. How can I save the project to make sure that when I delete the big project, the parts that I have edited and want to not get deleted?
As for my Imovie, It is a 22 minute long home video that does include 5 chapter markers, including the one that starts the movie from the begining. There is music for every clip from my itunes. The theme i chose is the first one listed on the list. It starts in from the right side, and then scrolls across at the top. All of the menus work fine when i play my burned DVD. In fact, everything works fine except for that one part when it freezes up.
I do not understand what you mean by adding my movie to a drop zone and not to the background. The way i started it on Idvd was by clicking, create an Idvd from the menu on imovie.
I made a new step of progress and i got the encoding of the video, but it still did not work. It froze at 3:03 instead of 3:27, 3:38, or any of the others. This is the second disk i have made though that will play on my Powerbook. It freezes on everything else though.

Error #-34506 when burning a DVD from iDVD 5.0.1

Hi everybody,
Everytime I try to burn a a finished iDVD project (a big QuickTime movie), I get a message : "There were errors while multiplexing and burning", error#-34506. In reality the project wasn´t burned, the DVD is empty. When I burn a short slideshow - no problems. I tried different manufacturers of DVD-Rs to no avail.
Any help will be greatly appreciated.
PowerMac 2GHz DP, 39 GB free harddisk space, MacOS 10.4.2, iLife 5, newest updates
Regards, Adam

I have the exact same problem. I am running a brand new iMac G5 2ghz with 10.4.2 and iDVD 5.01 and QT 7.03. I have tried it by importing my DV and MOV files into iDVD. Same failure with differnt media, even skipping one clip that I thought might be problematic.
Have further tried it with different compression settings in preferences... high quality vs. high performance. Same error.
Imported movies into iMovie and tried to run iDVD from there.... everything crashed. After a reboot, tried it again, and this time at least got a description of the error... something to the effect of "there was burning error but the disk has been untouched and can be reused, please try again..."
Am no trying to reimport clips into imovie, and export as one movie in both DV and MOV formats, to try it again..
Apple help couldnt even find the error number much less offer any other help..
IDEAS??

I have problems with my project in imovie, when I play the proyect in full screen it interrupts and tells me to report it to apple...what can I do? I need to finish and convert in video and just cant, who can help me? My mac is Air...

Dear comunity I need urgent assistance with my imovie proyect
I have problems when I check my proyect in full screen it simply stops and aborts out of imovie, tells me that ocurred an error and asks me if I want to report to apple the error. But dont know if the problem is that I have too many resources in the proyect. Its long and has a lot of videos and music all the proyect, also it has about 20 min.
please help me

Please authorize ADE 3 with same credentials that you used with older version of ADE

Problems with picture quality in iMovie when panning

When I pan and zoom slideshows using iMovie HD 06 the pictures become distorted in a... interlacing sort of way... can't really describe it but the details of the picture starts to go and I see flickering. I'm using a Sony DSLR, set on high res so I know it's not the camera or the quality. I've tried watching the movie on two TVs. An HD widescreen and an old SD TV but I see the flickering on both. This is really bugging me because I can't see the pictures in their full quality. Anybody's having this problem?

this topic is endlessly discussed on this board..
on the start page of this board you see few, .. without scrolling ...
try the forum's Search feature..
a good start are Karl's replies & strategies in this thread :
http://discussions.apple.com/message.jspa?messageID=4399400#4399400
http://discussions.apple.com/thread.jspa?messageID=961045

Problem with itunes locking up only when burning to music library

All of a sudden when I burn my discs to an external hard drive with about 1-3 songs (never at beginning or midway through the burn)left to burn itunes locks up, forcing me to restart computer. Not all discs but about 1 every 15-20 burned. Since I am burning over 2000 of my cd's to library this is very annoying. If I use itunes just to play the disc it is fine and the discs work fine in my home audio system. I use windows xp and am burning to a western digital external hard drive. The discs are all clean with no visible signs of scratches or scuffs.
Any suggestions?

yes i mean importing. by the way i use apple lossless. no the specific discs will not import. i just tried importing a disc i just bought new and it does not import the whoe disc as well. all of the discs i am importing are mine and are originals...not burned.

I'm having an unusual problem with my iphone 4S. When I'm making a call, it suddenly sounds like my call has been invaded by aliens! Why is it doing this? I'm also having problems sending texts. Sometimes it sends sometimes it doesn't.

I'm having an unusual problem with my iphone 4S. When I'm making a call, it suddenly sounds like my call has been invaded by aliens! Why is it doing this? I'm also having problems sending texts. Sometimes it sends sometimes it doesn't. What is going on? Can it be fixed? I'm really not liking this new phone!!!!

Could be an issue with your Carrier and/or location...
The Basic Troubleshooting Steps are:
Restart.. Reset.. Restore from Backup... Restore as New...
Try a Reset...
Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release the buttons...
http://support.apple.com/kb/ht1430

I have sounds problems with iOS 7

I have sounds problems with iOS 7. I can not hear my music, all the apps have no sounds. Only when I ask Siri has sound but it's too loud and awful. I found 2 errors with I ask to Siri what things she can do in Spanish the is an error and one word or If I ask who am I? She said that I have to go to settings and indicate her who I am but I already have that configured. And I try to configure again just in case, I do the same question and she still doesn't who I am.

Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/

Really weird sound problem with rhythmbox[SOLVED]

Well, I can't find anything on this, so i'm posting it here. I have no sound problems with alsa or other gstreamer apps(totem, banshee plays sound just fine). But when I try to play something in rhythmbox it just does not work. Mostly there is no sound, but every couple of seconds you can hear a distorted sound that is suposed to be playing for a moment. Rhythmbox does not issue any warnings or errors when launched from terminal. Is this some kind of bug?
Last edited by klohs (2009-05-15 13:34:46)

I had the same problem, but it disappeared yesterday. Try it run under root - it helped me. I dont really know how i fixed it, but it works under normal user now as well ...I hope there will be someone who knows.

I am currently experiencing problems burning a DVD using iDVD. I have created a project in iMovie. I have shared it to media successfully however when I try to burn it I receive a messaging advising there is insufficient disk space on assets.

I have created a iMovie and wish to burn it to a DVD.
I successfully shared media to browser in preparation to burn to DVD using iDVD magic.
I am able to successfully preview however when I try to burn I receive a error indicating "Not enough disk space on assets"
I am currently using a Macbook Air
Version 10.6.8
Model Name:          MacBook Air
Model Identifier:          MacBookAir3,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          1.4 GHz
Number of Processors:          1
Total Number of Cores:          2
L2 Cache:          3 MB
Memory:          2 GB
Bus Speed:          800 MHz
Boot ROM Version:          MBA31.0061.B01
SMC Version (system):          1.67f10
Serial Number (system):          C02DRL8JDDQX
Hardware UUID:          53310599-83EA-5F58-99A9-AE505506BBFE
Capacity 60.32 GB
Available - 2.49 GB
The iMovie I am trying to burn is 45 mins long
Any suggestions would be greatly appreciated...

Reduce your burn speed to 1/2 the Rating of the Media.
Disc Burner
If more than one supported disc burner is connected to your computer, choose one from the menu.
Preferred Speed
When you burn a CD, iTunes automatically uses the best recording speed for the CD. However, if your blank CD is rated for a slower speed than the maximum speed of your drive, or if you experience problems creating CDs, you may want to change the recording speed to match the CD’s rating.
Disc Format
Choose the type of disc you want to burn: Audio CD; MP3 CD; or Data CD or DVD.
Gap Between Songs
Choose the amount of silence, if any, between songs.
Use Sound Check
To have all songs on the disc play at the same volume, select this option.
Include CD Text
To include information that CD players in some vehicles can display, select this option.

Sound problems with iPhone 6 plus

I have sound problem with my iPhone 6 plus.
Some apps have sound, others no.
For exemple the app minipiano has no sound (it works fine on my ipad mini)
Does anyone has the same problem ?

Hello there, .applefan.
When having performance issues with an application installed on your iOS device, the following Knowledge Base article offers up some practical steps for troubleshooting your issue:
iOS: An app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Sound problems with my Visio

Hi, I have read that people are having sound problems with their Vision M players, hissing etc.
I wonder if anyone has had the problem I have - I cannot alter the volume! When I plug in either headphones or portable speakers into the M, using the touch pad has no effect on the volume. If I unplug it the touch pad then alters (or appears to) the volume - judging by the scale on the right of the screen. Plug the phones back in again and I get the same one level of volume.
Also, the screen goes blank when I plug in phones or speakers.
I am an MP3 player virgin and have no idea if the fault is mine or not.
I bought my Vision M from Amazon, who very quickly sent me a replacement when I contacted them - even before I had returned the original. But the replacement has the same problems.
Any comments would be welcome.
John

woggydog, thats what happens when your plugging outputs into the Audio/Video out socket of the player using the dock or supplied connector... it goes into line Out Mode, which cuts out audio from changing since the amplifier would be able to control this on a sound system.
The one that shouldn't do this is the one on the top right of the player.

Sound problems with Portege M600 using WXP SP3

I have had on-going sound problems with my laptop and feel so frustrated - please help!
I have downloaded the sound driver (abt a million times - and tried uninstalling then reinstalling) - and repeatedly get no volume icon on the desk top and a message saying "no sound driver can be found".
I did manage to fix it once - when i had WIndows Vista installed - by finding some obscure patch - but this time around - no solutions.
Can anyone help - it is so frustrating!!!!

The mentioned patches are part of Win XP SP2 & SP3
So ensure that all service packs are installed.
Then go to device manager and delete the High Definition Audio Controller (in system devices) and additionally delete all devices from Audio, Video and Game controller section.
Then reboot the notebook.
Wait until the device would be recognized again and then install the sound driver!

I am having problems with the Preview application. When I try to use it to open a pdf document it gets hung-up and I have to select force quit to close it. Any ideas on how to resolve this problem? Thanks for any help

I am having problems with the Preview application. When I try to use it to open a pdf document it gets hung-up and I have to select force quit to close it. Any ideas on how to resolve this problem? Thanks for any help

Can you open the Preview program without loading a file, like by itself?
If it doesn't load then I suspect a corrupt Preview preference file.
Deleting the System Preference or other .plist file
Can you open other files with Preview, like jpg's and images?
How about other PDFs? or is it just that one you have downloaded?
Run through this list of fixes
Step by Step to fix your Mac

Hello, I am have problems with coruption of the photos in a slide show after burning the DVD in iDVD. This coruption does not always appear when you preview the project. I have slowed down the burn rate to 1X and kept the quality to professional.

I am having a great deal of problems with Data coruption in slide shows after I have burned a DVD in iDVD. I have changed burn rate from best to 1X with no difference in the coruption. I have the quality set to professional with no improvement. The size of the project is near 3.95, so it should fit on a single layer burn. Should I use either iMovie to create the slide show or "Photo to Movie"? Also, can anyone comment on how I preserve the highest quality picture resolution with a slide show? If I do use iMovie or Photo to Movie, the file size should exceed the 4.2 size so, will I have to buy new DVD's which are capable to handle the double layer burn and upto 8 GB? What DVD's are recommended? Any preferred brand? Are there problems with burning with double layer? I read on this blog of numerous problems.

DVDs are LOW resolution by today's standards - only about 0.3 megapixels - so there is no way they your images on a TV set will look "High Definition". See Preparing images for iDVD slideshows at http://docs.info.apple.com/article.html?path=iDVD/7.0/en/6675.html for recommendations on image sizes to use. Using larger images won't give you better quality, andf in some cases, will lower you image quality because the Quicktime resizing that occurs isn't the best.

Sound problems with film made in iMovie when burned to DVD in iDVD

Similar Messages

Maybe you are looking for