Sound problems with movie

I just purchased the movie "Overboard" in HD. The movie video plays ok, but the sound keeps going in and out.
I don't understand why this is happening. My music plays ok and I'm not having any other sound problems with my
computer.  I am running Itunes on a Windows 8.1 desktop computer (Gateway).
I couldn't figure out how to re-download it or repair it.
If anyone can help, I'd appreciate it!
Thanks!

Hi Larry James,
If you are having video playback issues in iTunes on your Windows machine, you may find the following articles helpful:
Apple Support: Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/ts1718
Apple Support: Downloading past purchases from the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/ht2519
Regards,
- Brenden

Similar Messages

  • Problem with movies imported from iPad3

    Whenever I import footage into imovie, the footage looks good. When I put that footage into a project it stutters.
    It doesnt matter if I specify 24fps or 30fps, the movie judders and stutters.
    I do not have this problem with movie footage imported from any other device.
    Any ideas?

    Whenever I import footage into imovie, the footage looks good. When I put that footage into a project it stutters.
    It doesnt matter if I specify 24fps or 30fps, the movie judders and stutters.
    I do not have this problem with movie footage imported from any other device.
    Any ideas?

  • I have sounds problems with iOS 7

    I have sounds problems with iOS 7. I can not hear my music, all the apps have no sounds. Only when I ask Siri has sound but it's too loud and awful. I found 2 errors with I ask to Siri what things she can do in Spanish the is an error and one word or If I ask who am I? She said that I have to go to settings and indicate her who I am but I already have that configured. And I try to configure again just in case, I do the same question and she still doesn't who I am.

    Try a Restart. 
    Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
     Resetting your settings
    You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
    Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple. 
    Here is a link to their contacts with most of the information below. 
    http://www.apple.com/contact/

  • Is there a fix yet for the no sound problem with lion on the iMac without having to restart every time I switch the computer on?

    Is there a fix yet for the no sound problem with lion on the iMac without having to restart every time I switch the computer on?

    Try booting in Safe Mode by holding the the shift key immediately after powering on your system. Safe boot mode will for a directory check of your startup volume, then load only the required kernal extensions (kext files), and deletes some cache files. Once the system boots into Safe Mode you can simply restart the system to see whether the issue has been resolved.
    If you still have the issue try resetting the SMC by shutting down the system and disconnecting the power cord for ~15 seconds, then reconnecting the power cord. Next, reset the parameter RAM (PRAM) by holding down the option-option-P-R keys after powering ON the system. Wait until the iMac restarts twice, then let the system boot normally.

  • Really weird sound problem with rhythmbox[SOLVED]

    Well, I can't find anything on this, so i'm posting it here. I have no sound problems with alsa or other gstreamer apps(totem, banshee plays sound just fine). But when I try to play something in rhythmbox it just does not work. Mostly there is no sound, but every couple of seconds you can hear a distorted sound that is suposed to be playing for a moment. Rhythmbox does not issue any warnings or errors when launched from terminal. Is this some kind of bug?
    Last edited by klohs (2009-05-15 13:34:46)

    I had the same problem, but it disappeared yesterday. Try it run under root - it helped me. I dont really know how i fixed it, but it works under normal user now as well ...I hope there will be someone who knows.

  • Sound problems with iPhone 6 plus

    I have sound problem with my iPhone 6 plus.
    Some apps have sound, others no.
    For exemple the app minipiano has no sound (it works fine on my ipad mini)
    Does anyone has the same problem ?

    Hello there,  .applefan.
    When having performance issues with an application installed on your iOS device, the following Knowledge Base article offers up some practical steps for troubleshooting your issue:
    iOS: An app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Sound problems with my Visio

    Hi, I have read that people are having sound problems with their Vision M players, hissing etc.
    I wonder if anyone has had the problem I have - I cannot alter the volume! When I plug in either headphones or portable speakers into the M, using the touch pad has no effect on the volume. If I unplug it the touch pad then alters (or appears to) the volume - judging by the scale on the right of the screen. Plug the phones back in again and I get the same one level of volume.
    Also, the screen goes blank when I plug in phones or speakers.
    I am an MP3 player virgin and have no idea if the fault is mine or not.
    I bought my Vision M from Amazon, who very quickly sent me a replacement when I contacted them - even before I had returned the original. But the replacement has the same problems.
    Any comments would be welcome.
    John

    woggydog, thats what happens when your plugging outputs into the Audio/Video out socket of the player using the dock or supplied connector... it goes into line Out Mode, which cuts out audio from changing since the amplifier would be able to control this on a sound system.
    The one that shouldn't do this is the one on the top right of the player.

  • Sound problems with Portege M600 using WXP SP3

    I have had on-going sound problems with my laptop and feel so frustrated - please help!
    I have downloaded the sound driver (abt a million times - and tried uninstalling then reinstalling) - and repeatedly get no volume icon on the desk top and a message saying "no sound driver can be found".
    I did manage to fix it once - when i had WIndows Vista installed - by finding some obscure patch - but this time around - no solutions.
    Can anyone help - it is so frustrating!!!!

    The mentioned patches are part of Win XP SP2 & SP3
    So ensure that all service packs are installed.
    Then go to device manager and delete the High Definition Audio Controller (in system devices) and additionally delete all devices from Audio, Video and Game controller section.
    Then reboot the notebook.
    Wait until the device would be recognized again and then install the sound driver!

  • Sound problems with Satellite A100 (PSAA8)

    I am continually having sound problems with the laptop. Whilst I hear the windows start up noise and beeps, I cannot hear any sound from things like CDs, iTunes, Media Player - in fact an error message will always come up. In Media Player the error message "Windows Media Player cannot play the file because there is a problem with your sound device......." comes up. I have a the standard pre-installed Realtek sound thing on my laptop. I have tried downloading a newer driver from the Toshiba support centre, but I don't know what to do with the zip file. Also in Control Panel, Sounds, everything is greyed-out.
    Hope someone can help cos I am going nuts with this :-)
    Thanks

    Hi again
    I have downloaded the Realtek sound driver from the Tosh page and unzipped it.
    (I have chosen the driver for Vista!!! I suppose you use Vista???)
    There is a folder called sound. Access this folder and run Setup.exe
    But before you will start this procedure you could access the device manager (control panel -> computer -> device manager) and choose sound, video, and game controller. There you have to mark realtek AC and click on uninstall and reboot the unit.
    After this sound driver removing you should start the new driver installation described above. (setup.exe)

  • Sound problems with my apple products

    I have been having sound problems with my apple products. I updated they and it went away for a little while but now my ipad  has no sound and the volume controls will not show up

    Hello Jamie_245,
    While the article was written for the iPhone, the troubleshooting details can be useful for resolving similar issues with an iPad.
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/TS5180
    Cheers,
    Allen

  • Sound problems with film made in iMovie when burned to DVD in iDVD

    PLEASE HELP!!!
    I have upgraded to iLife 09 and for all the bad that people have to say, I actually like it a lot. Anyway, it gave me the encouragement I needed to play with some old home movies I had stored with the aim of producing DVDs to give to my friends, and hopefully showing off the slick production values I have come up with.
    So after spending a week getting to grips with iMovie and editing an old holiday film with all the cuts, transitions, chapter markers and music etc that I wanted, I ended up with an hour long movie that I was happy with.
    Then to iDVD. After trying out all sorts of ways to go from iMovie to iDVD to ensure the best quality, I have finally given up trying to replicate the on screen quality of the movie in iMovie with the finished DVD, and just opted for the easy to use 'share to iDVD' option. The quality is not great, but then the footage is old anyway so not too much of an issue.
    Then I spend another few days playing with and learning iDVD and again end up with a finished product that I am happy with, with nice looking menu's and a slideshow etc.
    So I come to burn the final DVD, for which I pick the 'Professional burn' option which takes 4 hours but I am happy to wait if it means the best quality possible, and my DVD is done.
    I then play the DVD to discover my problem - the sound in the movie is not right. To explain further, in my movie I have reduced the sound of some of the film clips to nothing and placed music over the top. When played and previewed in iMovie it works fine - the music plays and the sound that is attached the the video does not. When previewed in iDVD it works fine - just as I had edited it in iMovie. But then when I burn the DVD, some of these sounds are present again which completely wastes all my hard work at the editing stage.
    I have searched and searched for help on this but am unable to find any.
    Sorry for the very long description and story behind my issue, but it is massively frustrating. Basically, at some point during the 'burn to DVD' stage in iDVD it decides to completely ignore most of the sound edits I have made on the movie in iMovie.
    If anyone can help it would be much appreciated.
    Many thanks in advance.

    Many thanks. Looking at that thread it looks like there are a few others having the same issue as me. Might be to do with not using the predetermined rates for clip slowdown and inputting my own.
    The frustrating thing is that I have only done this once right at the start of my hour long movie and if I change it now it with though the timing of my whole film out.
    Not much else I can do though I suppose.

  • Sound problem with my iPod touch! Need urgent help!

    I have an iPod Touch 8gb 3rd gen (2nd gen) and have owned it for a couple years. Recently I've been noticing some sound problems when I listen to music with earbuds/headphones. One of the earbuds will lose sound and won't produce music but if I twist the input plug it produce little or full sound but if it moves out of a certain position it won't produce sound out of that bud. I'm using Skullcandy Ink'd earbuds so I thought maybe since they arn't great it might be a manufacturer defect but I used them with my iPod Nano 2gb 1st gen and I could hear out of both earbuds perfectly. I even plugged in my iPod Touch into a car adapter so I could listen to my music through the car stereo and it went in and out of sound so I realize now it is my iPod and not  3rd party equipment I've been using with it that is the problem. Since its the iPod what is the exact problem and how do I fix it? I really don't want to use my old iPod since it doesn't have enough storage for my music now and I'm already getting something else for Christmas that I've been wanting for a while. Please help!

    If your car adapter works thru the headphone jack, the problem could just be dirt inside the jack.
    Try just putting in and out the headphone plug a few times. You can also try cleaning the jack, just don't use anything wet. Cotton swabs are also not advisable as they might leave lint and make things worse.
    To make sure it's not a oft ware issue, try to Reset your device.  
    Press and hold both the Sleep/Wake button and the Home button for at least ten seconds, until the Apple logo appears (ignore the Slide to Power Off that shows up first).

  • Problems with mov. files

    I have a JVC Everio camcorder. I have been messing with it for weeks now with little luck. When you save files it is a moi. or mov. file.
    The only program i want to watch the vidoes on is Quicktime. I am recording sports videos and want to use the scroll bar so i can look for errors in technique.
    I have downloaded dozens of fixes and none of them work.
    I can watch the clips in any viewer except quicktime. I have used power director, VLC Player, Windows Media Player, power cinema, and nero but none of them do what i want them to.
    I can change the file name. I have changed the name to avi, mpeg, mpg, and everytime i try to open it in quicktime i get the message (quictime will not open it because it is not a file quicktime understands) well what does it understand? I bought quicktime pro because that was supposed to work well it doesnt.
    Please help

    I am also having problems playing .mov files. My problem is that I just bought a Canon camera that shoots 720p video and when I save it to my computer and try to open it in quicktime, it plays but the picture hangs up. I have a Dell monitor that plays HD videos that i've downloaded from the internet all the time. The sound is fine but the picture lags and nothing i've tried seems to work. I have quicktime 7.6 and I want to know what I can get to make my computer play 720p files.Can you help please?

  • Sound Problems with Itunes 6/Quicktime 7

    Just installed Itunes and QT 7 so I can start preparing for my first IPOD in a couple of weeks. I am getting the 60G Video unit so I am working on converting some videos etc, Podcasts etc. I have come to the point of frustration with this Quicktime sound problem...video is great but sound is garbled (sounds like underwater). Even trailers in QT look good but sound like crap. I have adjusted all the options in the QT control panel to wave out settings etc...everything I tried from postings havent worked. I can watch a trailer in Windows Media and its perfect...try QT Version and the sound is terrible...I have tried many things but could sure use more help...I want to be able to get things set up before I get the IPOD...your help is appreciated...Podcasts I download are garbled (the video ones). I have no problem with MP3's...they sound fine...its the quicktime video...I have also used DVD Decryptor and Videora IPOD converter to convert movies etc...and picture is great but sound is hosed...please help...it won't go without thanks...
    Dell D800   Windows XP Pro  

    me too sounds like ****

  • Sound problems with iTunes

    I am running iTunes 8 on my Acer Aspire One. The sound is terrible--vocals are not audible, regardless of what speakers or headphones I use or equalizer settings. This is a big problem with the video of course. I think that the audio drive is Realtek (sorry I have more mac than pc experience). Sound quality is fine through other source, i.e. streaming.
    Any help would be great!

    Ok, something weird just happened to my movies in my collection - the ones that were imported as mp4 have all been corrupted too.
    Previously, they all worked fine - sound tracks perfect. Now, they have no vocals at all just background music and some background noises.
    The rental I purchased was unaffected.
    I am running iTunes 8.2.
    Suggestions welcome here because I'm wondering what 8.2 as done to my files!

Maybe you are looking for