Sound problems with Tomtom 930T over bluetooth

I have sound dropouts problems when using the handsfree mode on my Tomtom 930T.
Sound will just drop to a super low volume, then come back up multiple times throughout a phonecall.
It's totally consistent (timed it to a recorded message, it happens at the same spots all the time).
It's not the Tomtom (tried another non-iphone phone and it works fine, tried pairing my iphone to another tomtom and it shows the same problem).
Any ideas?

Understood. My point is that there isn't (AFAIK) a different bluetooth profile for car kits and GPS units.
As you probably know, Bluetooth profiles are an international standard. When the iPhone advertises the bluetooth profiles it supports (during the discovery process), it either supports it or it doesn't (same for the car kits or GPS). The iPhone has no way to then act differently because it's connected to a specific type of units rather that another (which is why the blue tooth standard was made in the first place). If it supports the bluetooth profile for hands-free (which is he one used for car kits & headsets) and both have implemented the standard properly, then it should work no problem.
I hope this makes sense
My suspicion are in an implementation bug on the iPhone or the TomTom. I'm trying to find other people with similar issues to diagnose which one is more likely.
Anyone else with sound issues on car-kits or GPSs?

Similar Messages

Problems with File Transfers Over Firewire 800

Problems with File Transfers Over Firewire 800.
Over the past month, I have had problems when transfering files from my harddrive, over Firewire 800 to a portable drive. I usually transfer very large files (20gb or more) to the portable drives for moving files around. When I drag a file over to copy onto a drive, the transfer starts normally. If I drag more files to copy over, the computer screen goes darker and a large icon comes up that looks like a power button icon. It tells me to restart, so I have to do a hard shut down on my G5. Weird. I also get the dark screen of death sometimes when I am transfering those large files and open another application to do some work while it's copying. It's killing me. I am having to sit here and wait for the transfer to finish before I can do anything.
Any thoughts...
Dual 2.7 GHz PowerPC G5
Mac OSX 10.4.3
Dual 2.7 GHz PowerPC G5 Mac OS X (10.4.3)

Have you run the Apple Hardware Test? Sounds like it could be a RAM problem.

I have sounds problems with iOS 7

I have sounds problems with iOS 7. I can not hear my music, all the apps have no sounds. Only when I ask Siri has sound but it's too loud and awful. I found 2 errors with I ask to Siri what things she can do in Spanish the is an error and one word or If I ask who am I? She said that I have to go to settings and indicate her who I am but I already have that configured. And I try to configure again just in case, I do the same question and she still doesn't who I am.

Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/

Is there a fix yet for the no sound problem with lion on the iMac without having to restart every time I switch the computer on?

Is there a fix yet for the no sound problem with lion on the iMac without having to restart every time I switch the computer on?

Try booting in Safe Mode by holding the the shift key immediately after powering on your system. Safe boot mode will for a directory check of your startup volume, then load only the required kernal extensions (kext files), and deletes some cache files. Once the system boots into Safe Mode you can simply restart the system to see whether the issue has been resolved.
If you still have the issue try resetting the SMC by shutting down the system and disconnecting the power cord for ~15 seconds, then reconnecting the power cord. Next, reset the parameter RAM (PRAM) by holding down the option-option-P-R keys after powering ON the system. Wait until the iMac restarts twice, then let the system boot normally.

Really weird sound problem with rhythmbox[SOLVED]

Well, I can't find anything on this, so i'm posting it here. I have no sound problems with alsa or other gstreamer apps(totem, banshee plays sound just fine). But when I try to play something in rhythmbox it just does not work. Mostly there is no sound, but every couple of seconds you can hear a distorted sound that is suposed to be playing for a moment. Rhythmbox does not issue any warnings or errors when launched from terminal. Is this some kind of bug?
Last edited by klohs (2009-05-15 13:34:46)

I had the same problem, but it disappeared yesterday. Try it run under root - it helped me. I dont really know how i fixed it, but it works under normal user now as well ...I hope there will be someone who knows.

Safari have problems with streaming radio over flash

Hello,
since my update on MAC OS LION have my safari problem with radio streaming over flash.
For testing: http://shoutcast.flashradio.info/#/House/814384/
In all browsers on all platforms will this work. Just on the combination from MAC OS LION and Safari 5.1 we get the io error #2032.

Try changing some Advanced wireless settings on the router. Open the setup page of the router and go to Wireless tab. Click on Advanced wireless settings. Change beacon Interval to 75, RTS threshold to 2304. Save the settings.
Change the wireless channel to 11.
An 802.11n router can also work with 802.11g and even 11b devices. But these much slower devices force the router to slow down to talk to them, which means a big throughput hit. Fortunately, the "legacy" mechanisms are pretty efficient and reduce throughput only when the slower devices are actively transmitting or receiving. Either upgrade to all 11n clients, or use a separate 802.11g router to handle your "legacy" stuff.

Sound problems with iPhone 6 plus

I have sound problem with my iPhone 6 plus.
Some apps have sound, others no.
For exemple the app minipiano has no sound (it works fine on my ipad mini)
Does anyone has the same problem ?

Hello there, .applefan.
When having performance issues with an application installed on your iOS device, the following Knowledge Base article offers up some practical steps for troubleshooting your issue:
iOS: An app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Sound problems with movie

I just purchased the movie "Overboard" in HD. The movie video plays ok, but the sound keeps going in and out.
I don't understand why this is happening. My music plays ok and I'm not having any other sound problems with my
computer. I am running Itunes on a Windows 8.1 desktop computer (Gateway).
I couldn't figure out how to re-download it or repair it.
If anyone can help, I'd appreciate it!
Thanks!

Hi Larry James,
If you are having video playback issues in iTunes on your Windows machine, you may find the following articles helpful:
Apple Support: Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/ts1718
Apple Support: Downloading past purchases from the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/ht2519
Regards,
- Brenden

Sound problems with my Visio

Hi, I have read that people are having sound problems with their Vision M players, hissing etc.
I wonder if anyone has had the problem I have - I cannot alter the volume! When I plug in either headphones or portable speakers into the M, using the touch pad has no effect on the volume. If I unplug it the touch pad then alters (or appears to) the volume - judging by the scale on the right of the screen. Plug the phones back in again and I get the same one level of volume.
Also, the screen goes blank when I plug in phones or speakers.
I am an MP3 player virgin and have no idea if the fault is mine or not.
I bought my Vision M from Amazon, who very quickly sent me a replacement when I contacted them - even before I had returned the original. But the replacement has the same problems.
Any comments would be welcome.
John

woggydog, thats what happens when your plugging outputs into the Audio/Video out socket of the player using the dock or supplied connector... it goes into line Out Mode, which cuts out audio from changing since the amplifier would be able to control this on a sound system.
The one that shouldn't do this is the one on the top right of the player.

Sound problems with Portege M600 using WXP SP3

I have had on-going sound problems with my laptop and feel so frustrated - please help!
I have downloaded the sound driver (abt a million times - and tried uninstalling then reinstalling) - and repeatedly get no volume icon on the desk top and a message saying "no sound driver can be found".
I did manage to fix it once - when i had WIndows Vista installed - by finding some obscure patch - but this time around - no solutions.
Can anyone help - it is so frustrating!!!!

The mentioned patches are part of Win XP SP2 & SP3
So ensure that all service packs are installed.
Then go to device manager and delete the High Definition Audio Controller (in system devices) and additionally delete all devices from Audio, Video and Game controller section.
Then reboot the notebook.
Wait until the device would be recognized again and then install the sound driver!

Sound problems with Satellite A100 (PSAA8)

I am continually having sound problems with the laptop. Whilst I hear the windows start up noise and beeps, I cannot hear any sound from things like CDs, iTunes, Media Player - in fact an error message will always come up. In Media Player the error message "Windows Media Player cannot play the file because there is a problem with your sound device......." comes up. I have a the standard pre-installed Realtek sound thing on my laptop. I have tried downloading a newer driver from the Toshiba support centre, but I don't know what to do with the zip file. Also in Control Panel, Sounds, everything is greyed-out.
Hope someone can help cos I am going nuts with this :-)
Thanks

Hi again
I have downloaded the Realtek sound driver from the Tosh page and unzipped it.
(I have chosen the driver for Vista!!! I suppose you use Vista???)
There is a folder called sound. Access this folder and run Setup.exe
But before you will start this procedure you could access the device manager (control panel -> computer -> device manager) and choose sound, video, and game controller. There you have to mark realtek AC and click on uninstall and reboot the unit.
After this sound driver removing you should start the new driver installation described above. (setup.exe)

Sound problems with my apple products

I have been having sound problems with my apple products. I updated they and it went away for a little while but now my ipad has no sound and the volume controls will not show up

Hello Jamie_245,
While the article was written for the iPhone, the troubleshooting details can be useful for resolving similar issues with an iPad.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/TS5180
Cheers,
Allen

I keep having the same problem with my messages over and over again. My number is not checked in my message settings it just unchecks itself

I keep having the same problem with my messages over and over again. My number is not checked in my message settings it just unchecks itself

Dear Tomarshe
I had the same problem a couple of weeks back.
What I did was that I restarted that Ipad of mine and voila!
Problem solved!
hope this helped!
- DASHdotDASHdot

Help 5800 bluetooth problem with tomtom & vauxhall...

my 5800 wont auto connect to my tom tom i have to connect manually any ideas ????
also i cant down load my phone book or see any call list in my car ( 2008 vauxhall zafira (uhp) factory fitted hands free ) please help

did you authorize your tomtom in the bluetooth settings for automatic connection?
My dad also drives the zafira with the hands free and i can tell you phonebook downloading is only supported via cable-connection (cradle).
But my carkit installer says its a normal thing with opel/vauxhall handsfree

Bluetooth connection problems with TomTom Go910

Although my TomTom Go910 finds my 5800 it keeps saying that there is no answer from phone 'look at your phone'. Anyone got any ideas what's wrong as my previous Nokia had no such problems?

I have the same problem with both our TomTom 500 and 530. Really annoying as our olf Nokia 6300 worked with both including SMS. The 5800 often has to be 're-booted' to connect and then most of the time does not work.

Sound problems with Tomtom 930T over bluetooth

Similar Messages

Maybe you are looking for