Sound problems with vista

i just purchased a new idea center that i thought was top of the line..but  the sounds comming out  sound like the chipmunks.. How  do i correct this or is it the machine  sound card??

I agree with Hantula the new audio driver makes all the difference  in the world the download is at
http://www.softsea.com/download/Realtek-High-Definition-Audio-Vista-Driver.html (It auto downloads)
There is a High Definition control center/Panel so you can really tweak your sound system 5.1 and 7.1 surround sound.  If Realtek only gives you the driver  leave me a note and I'll zip the control panel to you it's a small file, but it's like getting a new sound card and it's just for Lenovo systems
 lenovo HD audio manager

Similar Messages

  • Sound problems with vista 32 bit on xfi xtremegamer

    hi im havin sound issues with my sound blaster xfi fatality xtremegamer on vista 32 bit. the sound will sound like a skippin cd or sound like it is stuterin for a few seconds than it will play fine than do it again later on. i was wounderin if its a driver issue with vista or my sound card has broke? i had it runnin on xp and had no problems. can anyone help me please as my card is only abot 8 months old so if it could be faltiy i am still covered by warrinty.

    I don't know if it's the driver that's causing a problem or if it's one of your components that's causing a problem. All I know is that the X-Fi is working great on my system, both in XP Pro and Vista Business. I'm not 100% sure about this, but I think I installed the driver first and then the software from the leaked Vista Suite that I downloaded from a link in a post on this forum. Never had a problem with any of the previous drivers either, but on the other hand this system was built in november/december last year, so the hardware was fairly new at the time.

  • MOVED: msi 790fx-gd70 sound problem with VISTA 64 Black

    this problem is a Vista-problem, since sound works in XP.
    This topic has been moved to Vista problems.
    https://forum-en.msi.com/index.php?topic=130464.0

    Quote from: Bas on 14-July-09, 01:02:26
    Simple question, why don't you install Windows raid instead of AMD raid?
    The result will be the same but you will be controller independent.
    As you are doing mirror, software (Windows) raid can actually be faster.
    Also, why aren't you doing RAID5 with all those disks?
    It's faster and on top more secure.
    Thanks
    I thought it is supported on HW so I can implement that. I will try to that in Windows.

  • Strange sound problem with Vista (k8t neo +alc655)

    Hi everyone.
    I´m having a strange problem regarding the sound.
    Everything seems okay but there is no sound at all.
    Can someone post a link to the latest drivers for my mobo and for windows vista?
    Are there any alternative drivers?
    Driver version installed
    VIA ac97 enhanced audio controller
    6.0.5744.16384
    TIA
    Seoded

    That was the first thing i´ve tried.
    The weird thing is that when i runthe latest direveres (6171_Vista_Beta) the system gives me hi messsage "this controlores are only for vista/vista64".
    I don´t know what else to do.
    Seoded

  • Problem with vista and 5.1

    problem with vista and 5. i install my old audigy 2 zs exp pro with DTT2500 speaker
    In my new pc.
    i install vista 64 and SBAX_PCDRV_LB_2_8_000 driver from creative site.
    when i go to control panel/sound and test the 5. surrund ' iget only the two front speaker.
    why is that?
    i try to play a song from vista folder "Distance" and i get all 5 +sub to play.
    do i miss something?
    is the test worg and with another test i can get all spedajer to work or the driver is not good?
    thanks for all you help
    last update...
    i can get 4 speaker when i use the fourpoint mode on the desktop theather 5. dtt2500 digital,
    but in movie mode i get only 2 front speaker.
    i use the digital out from the sound blaster.
    Message Edited by raflevi on 05-4-2009 02:38 [email protected]

    My apologies about not explaining further about disabling SPDIF passthrough. See the steps below to enable DDL encoding.
    ***Before proceeding please make sure that you've purchased, installed and activated the DDL pack***
    . Open Creative Audio Console, go to the Decoder tab to disable driver level encoding and enable SPDIF passthrough (this is done by selecting SPDIF passthrough or any similar option that enable the use of an external decoder) instead of using the built-in decoders.
    2. Open up your playback devices window (right click on the speaker icon on the taskbar and select playback devices) and set analog speakers (not SPDIF) as your default device. This is VERY IMPORTANT step, or else you get the "the device is busy" error when enbaling DDL encoding.
    3. In the Audio Console, select the Encoder tab and enable DLL encoding.
    Note:
    When DDL encoding is enabled, it makes exclusi've use of your SPDIF connection so, no passthrough is possible. The default output format when using DDL encoding is 48KHz/6 bits. If you make use of any AC3 audio filters (such as ac3filter/others included in codec packs/media player softwares) when DLL encoding is enabled, then please change their output device to analog speakers instead of SPDIF.
    To use back SPDIF passthrough (when playing back media with a pre-encoded audio source), open up Audio Console and disable DDL encoding and in the Playback Devices window change the default device to SPDIF. If you make use of any AC3 audio filters (such as ac3filter/others included in codec packs/media player softwares) then please change their output device back to SPDIF. You may also wish to change back your output format to 92KHz/24 bits (right click on SPDIF and select properties -> Advanced tab).
    raflevi wrote:
    when you said to install ddl? pack you mean the "[url="http://buy.soundblaster.com/_creativelabsstore/cgi-bin/pd.cgi?page=product_detail&category=Software&pid=F 2222SR6PAKH5DGY6SD">Dolby Digital Li've Pack - SB Audigy Series[/url] "?
    thanks again for all your help.
    i wanted to use the 5. function mostly for games
    Yes... also please see the link in my previous post.
    Hope this answers your questions.

  • Sound problems with movie

    I just purchased the movie "Overboard" in HD. The movie video plays ok, but the sound keeps going in and out.
    I don't understand why this is happening. My music plays ok and I'm not having any other sound problems with my
    computer.  I am running Itunes on a Windows 8.1 desktop computer (Gateway).
    I couldn't figure out how to re-download it or repair it.
    If anyone can help, I'd appreciate it!
    Thanks!

    Hi Larry James,
    If you are having video playback issues in iTunes on your Windows machine, you may find the following articles helpful:
    Apple Support: Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
    http://support.apple.com/kb/ts1718
    Apple Support: Downloading past purchases from the iTunes Store, App Store, and iBooks Store
    http://support.apple.com/kb/ht2519
    Regards,
    - Brenden

  • Sound problems with Portege M600 using WXP SP3

    I have had on-going sound problems with my laptop and feel so frustrated - please help!
    I have downloaded the sound driver (abt a million times - and tried uninstalling then reinstalling) - and repeatedly get no volume icon on the desk top and a message saying "no sound driver can be found".
    I did manage to fix it once - when i had WIndows Vista installed - by finding some obscure patch - but this time around - no solutions.
    Can anyone help - it is so frustrating!!!!

    The mentioned patches are part of Win XP SP2 & SP3
    So ensure that all service packs are installed.
    Then go to device manager and delete the High Definition Audio Controller (in system devices) and additionally delete all devices from Audio, Video and Game controller section.
    Then reboot the notebook.
    Wait until the device would be recognized again and then install the sound driver!

  • Sound problems with Satellite A100 (PSAA8)

    I am continually having sound problems with the laptop. Whilst I hear the windows start up noise and beeps, I cannot hear any sound from things like CDs, iTunes, Media Player - in fact an error message will always come up. In Media Player the error message "Windows Media Player cannot play the file because there is a problem with your sound device......." comes up. I have a the standard pre-installed Realtek sound thing on my laptop. I have tried downloading a newer driver from the Toshiba support centre, but I don't know what to do with the zip file. Also in Control Panel, Sounds, everything is greyed-out.
    Hope someone can help cos I am going nuts with this :-)
    Thanks

    Hi again
    I have downloaded the Realtek sound driver from the Tosh page and unzipped it.
    (I have chosen the driver for Vista!!! I suppose you use Vista???)
    There is a folder called sound. Access this folder and run Setup.exe
    But before you will start this procedure you could access the device manager (control panel -> computer -> device manager) and choose sound, video, and game controller. There you have to mark realtek AC and click on uninstall and reboot the unit.
    After this sound driver removing you should start the new driver installation described above. (setup.exe)

  • T61 - problem with Vista x64 NVS 140M drivers

    Hi!
    I have problems with Vista x64 and NVS 140M drivers. Thing is that if I install them, everything will be slideshow, even the audio shutters quite bad and CPU is constantly over 45%. I have tried different driver versions but nothing has helped yet. Any ideas?
    I wonder if anyone has the old 7.15.11.0129 driver and could send it to me? Maybe that would help.

    Try the following test:
    - Go to Vista Sound Control Panel to view the S/PDIF out properties.
    - Click on the Supported Format tab page, select Dolby Digital and click Test.
    Is the test OK?

  • Airport Extreme Utility problem with Vista (works with XP, MacOS)

    Hi,
    I just setup a new Airport Extreme network at my house, and most things are working fine. I have wirelessly connected at various points an Airport Express (using WDS), a MacBook Pro (OSX) and an IBM Thinkpad. I have several wired machines as well.
    My problem: The wired machine I use to configure and setup everything is a Vista Ultimate machine. Unfortunately, the Airport Utility won't connect to the Airport Extreme (or Airport Express for that matter) from Vista. The utility works fine from XP or OSX, but not from Vista. Note that I'm using this in a wired capacity. The Vista machine is directly connected to the Airport Extreme, while several other machine are connected through a GBit switch.
    Any help would be much appreciated? Is this a Vista security problem or an Airport Utility problem with Vista?

    It's most likely a security issue with Windows Vista. Vista has the ability to set "compatibility modes" for applications.
    Try:
    1. right mouse clicking the Airport Utility's .exe file.
    2. Click the Compatibility tab. Change the Compatibility mode to Windows XP (Service Pack 2).
    3. Now go down to "Privilage Level" and check the "Run this program as an administrator"
    Apple never tells you this but you must connect to the Airport Extreme wirelessly. Now run the Airport Utility. You should see it.

  • I have sounds problems with iOS 7

    I have sounds problems with iOS 7. I can not hear my music, all the apps have no sounds. Only when I ask Siri has sound but it's too loud and awful. I found 2 errors with I ask to Siri what things she can do in Spanish the is an error and one word or If I ask who am I? She said that I have to go to settings and indicate her who I am but I already have that configured. And I try to configure again just in case, I do the same question and she still doesn't who I am.

    Try a Restart. 
    Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
     Resetting your settings
    You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
    Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple. 
    Here is a link to their contacts with most of the information below. 
    http://www.apple.com/contact/

  • Is there a fix yet for the no sound problem with lion on the iMac without having to restart every time I switch the computer on?

    Is there a fix yet for the no sound problem with lion on the iMac without having to restart every time I switch the computer on?

    Try booting in Safe Mode by holding the the shift key immediately after powering on your system. Safe boot mode will for a directory check of your startup volume, then load only the required kernal extensions (kext files), and deletes some cache files. Once the system boots into Safe Mode you can simply restart the system to see whether the issue has been resolved.
    If you still have the issue try resetting the SMC by shutting down the system and disconnecting the power cord for ~15 seconds, then reconnecting the power cord. Next, reset the parameter RAM (PRAM) by holding down the option-option-P-R keys after powering ON the system. Wait until the iMac restarts twice, then let the system boot normally.

  • Really weird sound problem with rhythmbox[SOLVED]

    Well, I can't find anything on this, so i'm posting it here. I have no sound problems with alsa or other gstreamer apps(totem, banshee plays sound just fine). But when I try to play something in rhythmbox it just does not work. Mostly there is no sound, but every couple of seconds you can hear a distorted sound that is suposed to be playing for a moment. Rhythmbox does not issue any warnings or errors when launched from terminal. Is this some kind of bug?
    Last edited by klohs (2009-05-15 13:34:46)

    I had the same problem, but it disappeared yesterday. Try it run under root - it helped me. I dont really know how i fixed it, but it works under normal user now as well ...I hope there will be someone who knows.

  • Sound problems with iPhone 6 plus

    I have sound problem with my iPhone 6 plus.
    Some apps have sound, others no.
    For exemple the app minipiano has no sound (it works fine on my ipad mini)
    Does anyone has the same problem ?

    Hello there,  .applefan.
    When having performance issues with an application installed on your iOS device, the following Knowledge Base article offers up some practical steps for troubleshooting your issue:
    iOS: An app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Sound problems with my Visio

    Hi, I have read that people are having sound problems with their Vision M players, hissing etc.
    I wonder if anyone has had the problem I have - I cannot alter the volume! When I plug in either headphones or portable speakers into the M, using the touch pad has no effect on the volume. If I unplug it the touch pad then alters (or appears to) the volume - judging by the scale on the right of the screen. Plug the phones back in again and I get the same one level of volume.
    Also, the screen goes blank when I plug in phones or speakers.
    I am an MP3 player virgin and have no idea if the fault is mine or not.
    I bought my Vision M from Amazon, who very quickly sent me a replacement when I contacted them - even before I had returned the original. But the replacement has the same problems.
    Any comments would be welcome.
    John

    woggydog, thats what happens when your plugging outputs into the Audio/Video out socket of the player using the dock or supplied connector... it goes into line Out Mode, which cuts out audio from changing since the amplifier would be able to control this on a sound system.
    The one that shouldn't do this is the one on the top right of the player.

Maybe you are looking for