Sound says its enabled but nothing comes out of the speakers or headphones

The post says it all. No sound anywhere even though it says enabled

Hi,
Try the following.
First, temporarily uninstall Skype and when this has completed, restart the notebook.
Next, download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp56501-57000/sp56953.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery and plug in the AC Adapter.
Tap away at the esc key as you start the notebook to enter the Start-up Menu. Select the Bios option ( usually f10 ). Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
Let Windows fully load, then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, restart the notebook again.
If it now works Ok, reinstall Skype
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

Sound no longer comes out of the headphones but will come out of the speakers on a m6-1035dx.

I am using Windows 7 64-bit on an HP Pavilion m6-1035dx. Sound still comes out of the main speakers but won't come out of the headphones. I tried the audio troubleshoot buttom and it couldn't detect the problem. I also tried two headphones and neither work. I didn't make any changes to my computer or really touch my computer from when it went from working to not working.
This question was solved.
View Solution.

Take a look throught this HP document and see if it help:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01912228&lc=en&cc=us&dlc=en
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may click on the white star in the "Kudos" button for any helpful post to give that person a quick thanks. These feedback tools help keep our community active, so you receive better answers faster.

My mac book wont recognize my ipod. My Ipod will make the initial connected sound saying its charging but otherwise theres no way of finding the Ipod anywhere on the computer or Itunes.

My mac book wont recognize my ipod. My Ipod will make the initial connected sound saying its charging but otherwise theres no way of finding the Ipod anywhere on the computer or Itunes. Please help with anyway I can get the Ipod recognized so I can download music from Itunes to my Ipod. Thanks in advance.

Hello xerxes.nashion,
It sounds like your iPod is not recognized by iTunes or your MacBook Pro. I recommend following the steps in the article below for an issue like this:
iPod not recognized in iTunes and Mac desktop
http://support.apple.com/kb/TS1410
Thank you for using Apple Support Communities.
Best,
Sheila M.

HT203167 Cant find downloaded rental film. ITunes says its downloaded but nothing in download screen

Cant find downloaded rental film. ITunes says its downloaded but nothing in download screen

If you've downloaded it on the iPad then it should be in the Videos app (iTunes on the iPad is just the iTunes store) :
If you can't find it in there then have you got a film age rating set in Settings > General > Restrictions that is hiding it ?

HT4623 I am trying to update my ipad mini to ios7 the update says its downloading but nothing is happening what can I do?

I am trying to update my ipad mini to ios7 the update says its downloading but nothing is happening what can I do?

Reset iPad and continue with update.
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

My ipad will not start. It is 1 year old...I have tried holding the two buttons and nothing..I have it connected to my desktop and it will make a ding noise but nothing comes up on the screen.

My ipad will not start. It is 1 year old...I have tried holding the two buttons and nothing..I have it connected to my desktop and it will make a ding noise but nothing comes up on the screen.

Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

I have an iPhone 5 and with any pair of earphones that I plug in the sounds comes out of the speakers and not the earphones

I have an iPhone 5 and with any pair of earphones that I plug in the sounds comes out of the speakers and not the earphones
The problem occurred a few days after I had updated to iOS 7.02

Hey Tahls23!
I have an article that can help you troubleshoot that issue:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
No sound through stereo headset
Inspect the headset jack for debris and clean if necessary.
Connect the headset and make sure the connector is pushed in all the way.
Check the volume setting. Adjust the volume by pressing the volume up and down button on the left side of the iPhone.
If you are trying to listen to music and cannot hear any audio, make sure that the music on iPhone is not paused. Try squeezing the headset microphone to resume playback. Additionally, from the Home screen you can choose iPod > Now Playing, then tap Play.
Make sure the latest version of iTunes is installed on the computer that you are syncing the iPhone with (songs purchased from the iTunes Store using earlier versions of iTunes won't play).
Try another Apple headset (some third-party headsets require an adapter to be used with original iPhone).
Try a different song or video.
Check to see if the iPhone alert sounds or other iPhone sound effects exhibit the same audio issues.
Disconnect the headset from the iPhone and see if sound comes from the built-in speaker.
Take care, and thanks for visiting the Apple Support Communities.
-Braden

HT4060 i connected my ipad to my macbook. it says its charging but it's still draining the battery? whats the problem?

i connected my ipad to my macbook. it says its charging but it's still draining the battery? whats the problem?

Most USB port do not supply enough current to charge the iPad.

Sound no longer comes out of the speakers but will come out of the headphones on a m6-1035dx

I am using Windows 7 Home Premium 64-bit on an HP Pavilion m6-1035dx. Sound still comes out of the headphones but won't come out of the main speakers. I tried the audio troubleshoot buttom and it couldn't detect the problem. I also tried two headphones and neither work. While i was trying to test sounds on skype application I could hear the sounds on speakers for a very short time. Please Help!!

Hi,
Try the following.
First, temporarily uninstall Skype and when this has completed, restart the notebook.
Next, download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp56501-57000/sp56953.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery and plug in the AC Adapter.
Tap away at the esc key as you start the notebook to enter the Start-up Menu. Select the Bios option ( usually f10 ). Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
Let Windows fully load, then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, restart the notebook again.
If it now works Ok, reinstall Skype
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Indesign trial says its downloading but nothing happens

Indesign trial says it is downloading but nothing comes up.
nothing is shown on my Creative cloud desktop app. its a blank panel.
Help!!

Hello Offemar
Start with the article below, it will be help with not only the iTunes Store but the Mac App Store as well. Mainly Check to see if the ports are open or if a firewall is blocking the connection.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Regards,
-Norm G.

TS1205 I try to turn up the sound and nothing shows up on the screen like when I play music nothing comes out of the speaker if I plug my headphones in it works but if I take them out no sound comes out

No sound is coming out of the built in iPhone speaker I try turning it up and nothing shows up on the screen if I plug my headphones in and try to turn it up it will show headphones in Middle of me turning it up or down but if I unplug them and try it doesn't work

Hopefully one of these steps should solve the problem.
1. System Preference > Sound > Output > Internal Speakers
    Highlight Internal Speakers
    Make sure that Mute is not enabled.
2. Remove the headphone.
    If you see red light in the headphone port, plug the headphone
    in and out of the port 5 or 6 times to flip the microswitch inside.
    Sound output may be stuck in the digital mode.
3. Reset PRAM. http://support.apple.com/kb/PH4405
4. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
5. Applications > Utilities > Audio MIDI Setup
    Audio Devices window
    Side Bar
    Click the Built-in Output.
    Under Mute any of the boxes checked? If so, uncheck it.
6. System Preferences > Sound> Sound Effects
    Play sound effects through:
   Select "Internal speakers" and then back to "Selected sound output device".

[SOLVED] Sound will come out of the speakers, but not the headphones.

So, the headphones won't play any sound (they work with my phone, not on my laptop) when plugged in.
When the headphones are plugged into the jack, the speakers mute, so I know that the laptop is registering that they got plugged in, but still no sound comes out.
$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: VT1708S Analog [VT1708S Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 2: VT1708S Alt Analog [VT1708S Alt Analog]
Subdevices: 1/1
And:
amixer -c 0 contents
numid=21,iface=CARD,name='Headphone Jack'
; type=BOOLEAN,access=r-------,values=1
: values=on
numid=18,iface=CARD,name='Internal Mic Phantom Jack'
; type=BOOLEAN,access=r-------,values=1
: values=on
numid=19,iface=CARD,name='Mic Jack'
; type=BOOLEAN,access=r-------,values=1
: values=off
numid=20,iface=CARD,name='Speaker Phantom Jack'
; type=BOOLEAN,access=r-------,values=1
: values=on
numid=17,iface=MIXER,name='Master Playback Switch'
; type=BOOLEAN,access=rw------,values=1
: values=on
numid=16,iface=MIXER,name='Master Playback Volume'
; type=INTEGER,access=rw---R--,values=1,min=0,max=42,step=0
: values=33
| dBscale-min=-63.00dB,step=1.50dB,mute=0
numid=4,iface=MIXER,name='Headphone Playback Switch'
; type=BOOLEAN,access=rw------,values=2
: values=on,on
numid=3,iface=MIXER,name='Headphone Playback Volume'
; type=INTEGER,access=rw---R--,values=2,min=0,max=42,step=0
: values=42,42
| dBscale-min=-63.00dB,step=1.50dB,mute=0
numid=26,iface=MIXER,name='PCM Playback Volume'
; type=INTEGER,access=rw---RW-,values=2,min=0,max=255,step=0
: values=255,255
| dBscale-min=-51.00dB,step=0.20dB,mute=0
numid=15,iface=MIXER,name='Mic Boost Volume'
; type=INTEGER,access=rw---R--,values=2,min=0,max=3,step=0
: values=0,0
| dBscale-min=0.00dB,step=10.25dB,mute=0
numid=10,iface=MIXER,name='Mic Playback Switch'
; type=BOOLEAN,access=rw------,values=2
: values=on,on
numid=9,iface=MIXER,name='Mic Playback Volume'
; type=INTEGER,access=rw---R--,values=2,min=0,max=31,step=0
: values=18,18
| dBscale-min=-34.50dB,step=1.50dB,mute=0
numid=13,iface=MIXER,name='Capture Switch'
; type=BOOLEAN,access=rw------,values=2
: values=on,on
numid=12,iface=MIXER,name='Capture Volume'
; type=INTEGER,access=rw---R--,values=2,min=0,max=31,step=0
: values=15,15
| dBscale-min=-16.50dB,step=1.50dB,mute=0
numid=6,iface=MIXER,name='Loopback Mixing'
; type=ENUMERATED,access=rw------,values=1,items=2
; Item #0 'Disabled'
; Item #1 'Enabled'
: values=1
numid=11,iface=MIXER,name='Auto-Mute Mode'
; type=ENUMERATED,access=rw------,values=1,items=2
; Item #0 'Disabled'
; Item #1 'Enabled'
: values=1
numid=22,iface=MIXER,name='Dynamic Power-Control'
; type=ENUMERATED,access=rw------,values=1,items=2
; Item #0 'Disabled'
; Item #1 'Enabled'
: values=0
numid=5,iface=MIXER,name='Independent HP'
; type=ENUMERATED,access=rw------,values=1,items=2
; Item #0 'Disabled'
; Item #1 'Enabled'
: values=1
numid=14,iface=MIXER,name='Internal Mic Boost Volume'
; type=INTEGER,access=rw---R--,values=2,min=0,max=3,step=0
: values=2,2
| dBscale-min=0.00dB,step=10.25dB,mute=0
numid=8,iface=MIXER,name='Internal Mic Playback Switch'
; type=BOOLEAN,access=rw------,values=2
: values=off,off
numid=7,iface=MIXER,name='Internal Mic Playback Volume'
; type=INTEGER,access=rw---R--,values=2,min=0,max=31,step=0
: values=23,23
| dBscale-min=-34.50dB,step=1.50dB,mute=0
numid=2,iface=MIXER,name='Speaker Playback Switch'
; type=BOOLEAN,access=rw------,values=2
: values=off,off
numid=1,iface=MIXER,name='Speaker Playback Volume'
; type=INTEGER,access=rw---R--,values=2,min=0,max=42,step=0
: values=0,0
| dBscale-min=-63.00dB,step=1.50dB,mute=0
numid=24,iface=PCM,name='Capture Channel Map'
; type=INTEGER,access=r----R--,values=2,min=0,max=36,step=0
: values=0,0
| | chmap-fixed=FL,FR
numid=23,iface=PCM,name='Playback Channel Map'
; type=INTEGER,access=r----R--,values=2,min=0,max=36,step=0
: values=3,4
| | chmap-fixed=FL,FR
numid=25,iface=PCM,name='Playback Channel Map',device=2
; type=INTEGER,access=r----R--,values=2,min=0,max=36,step=0
: values=0,0
| | chmap-fixed=FL,FR
Anything else I need to show?
Last edited by Ave6 (2013-08-29 07:28:09)

rufus wrote:well you could post your alsamixer but before you do screw around with it turn all volumes up and such unmute everything
usually its the easiest damn thing maybe an F key needs tweaking....good luck!
Like this?
┌──────────────────────────────────────────────────── AlsaMixer v1.0.27.2 ────────────────────────────────────────────────────┐
│ Card: HDA Intel F1: Help │
│ Chip: VIA VT1708S F2: System information │
│ View: F3:[Playback] F4: Capture F5: All F6: Select sound card │
│ Item: Mic Boost [dB gain: 10.25, 10.25] Esc: Exit │
│ │
│ │
│ ┌──┐ ┌──┐ ┌──┐ ┌──┐ ┌──┐ ┌──┐ ┌──┐ ┌──┐ │
│ │ │ │▒▒│ │▒▒│ │▒▒│ │ │ │ │ │ │ │ │ │
│ │ │ │▒▒│ │▒▒│ │▒▒│ │ │ │ │ │ │ │ │ │
│ │ │ │▒▒│ │▒▒│ │▒▒│ │ │ │ │ │▒▒│ │ │ │
│ │ │ │▒▒│ │▒▒│ │▒▒│ │ │ │ │ │▒▒│ │ │ │
│ │ │ │▒▒│ │▒▒│ │▒▒│ │ │ │ │ │▒▒│ │ │ │
│ │ │ │▒▒│ │▒▒│ │▒▒│ │ │ │ │ │▒▒│ │ │ │
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │ │ │ │ │▒▒│ │ │ │
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │ │ │ │ │▒▒│ │▒▒│ │
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │ │ │ │ │▒▒│ │▒▒│ │
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
│ ├──┤ ├──┤ ├──┤ └──┘ ├──┤ └──┘ Disabled Enabled Enabled ├──┤ └──┘ Enabled │
│ │OO│ │OO│ │OO│ │OO│ │MM│ │
│ └──┘ └──┘ └──┘ └──┘ └──┘ │
│ 56 100<>100 100<>100 100<>100 37<>37 21<>21 87<>87 53<>53 │
│ Master Headphone Speaker PCM Mic <Mic Boost>Auto-Mute Dynamic P Independe Internal Internal Loopback │
│ │
│ │
└─────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘
Auto-Mute didn't really help...
Also, according to some post I saw online somewhere I added this to the default.pa in /etc/pulse/:
# Take Independent HP into use.
load-module module-alsa-sink device=hw:0,1

Maverick says its downloading, but nothing happens

The aps store says "downloading", de launchpad show the osx icon with the text downloading but nothing happens. There is no internet traffic, no file is being made. I;ve tried restarting, creating an extra user, removing the download and restarting from the launchpad. I've looked in the active applications but cant find anything useful. I can't find a file created today.
I hav a macbook 2010 running on 10.7.5, should do the trick.

Hello Offemar
Start with the article below, it will be help with not only the iTunes Store but the Mac App Store as well. Mainly Check to see if the ports are open or if a firewall is blocking the connection.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Regards,
-Norm G.

I can't to get Download Helper to load and run, It says its there but nothing happens

Our OS is Windows Vista and we have ff v. 27 running. I try to add Download Helper and don't have any success. When I click add, It says its installed and I can get the little circle icon in the toolbar. When I open a video nothing happens. Am I not installing properly. BTW, I'm a total dummy on this computer.

I've used this extension on Youtube from time to time. An icon appears next to the title of the video, below the player, and I click that. I'm not sure how it works on other sites. (Sometimes the icon is missing, but I see a little downward pointing triangle. In that case, I reload the page.)
Does the add-on publisher offer support on its site, or just the manual and FAQ?
* http://www.downloadhelper.net/manual.php
* http://www.downloadhelper.net/faq.php

Trying to download iTunes to my laptop, it says its downloaded but nothing happening?

TTrying to download iTunes to my laptop for the first time, it says thank you for downloading but nothing is happening? Help please, I'm trying to fix my phone after doing the latest download

See the Further Information area of Troubleshooting issues with iTunes for Windows updates for download advice and direct links if required.
tt2

Sound says its enabled but nothing comes out of the speakers or headphones

Similar Messages

Maybe you are looking for