Sound Server error in KDE

Hello all, new Arch user here. I've just installed kde and when launching KDE I receive the following error:
Error while initializing the sound driver:
device /dev/dsp can't be opened (Permission denied)
The sound server will continue, using the null output device.
I have tried to chmod 755 /dev/dsp as root but the next time I log on to KDE, I receive the same error. Any ideas?
Thx!!

The Wiki is usually helpful for things like this. If you enter 'audio' in the Find field and press the Search button, the article is listed.

Similar Messages

Sound server error after upgrading / removing hotplug

when i did my last update i got the message
udev conflicts with hotplug
i then answeres yes when i was asked to remove hotplug (and diabled it in rc.conf)
and now i get
Sound server informational message:
Error while initializing the sound driver:
device /dev/dsp can't be opened (No such file or directory)
The sound server will continue, using the null output device.
and the sound isn't working anymore.
[Solved]
(using the new rc.conf.pacsave)

Hi,
Same behaviour here. I'm using a Macbook 13.3 fresh updated to 10.5.6. The system hangs after wakeup, returning no login window. I need rebooting to take the control. Any issues?
thanks in advance.

Running Oracle10g Enterprise on Linux getting "Sound server fatal error"

Hi,
When i run Oracle 10g Enterprise Manager on linux machine,am getting below error frequently
Error Message "sound server fatal error,cpu overload,aborting"
Do u have any idea wt will be the cause and how to avoid that error
Thanks and Regards
Devi Prasad B

got it fixed. turns out that somehow during either my installation or someting i did after installation corrupted my liscense file for CF. Uninstalled (with a lot of hesitation) and re-installed, and wallah, my cf server is running great!

Asus G1 & jack audio sound server working really bad

Hi,
for those who know a little about jack low latency audio sound server, I have a big problem : it works like crap.
I get a ton of xrun errors running the jack server, even if I do nothing. The sound is sometimes saturated and it's quite impossible to play a sound file fluently.
I launch jack via qjackctl with some quite simple parameters. Been trying to change values but nothing changes.
I just don't understand : the sound card is doing well for a common use with alsa (playing mp3 & video files). I have disabled the kde sound system to save performance.
Note that I use jack successfully with an other computer (a desktop one) with a built in simple sound card and it works great out of the box.
Here with the G1, which is way much powerful, jack is just unusable.
Any idea anyone ?
The sound card is a HDA Intel built in a core 2 duo chipset.

Hi,
for those who know a little about jack low latency audio sound server, I have a big problem : it works like crap.
I get a ton of xrun errors running the jack server, even if I do nothing. The sound is sometimes saturated and it's quite impossible to play a sound file fluently.
I launch jack via qjackctl with some quite simple parameters. Been trying to change values but nothing changes.
I just don't understand : the sound card is doing well for a common use with alsa (playing mp3 & video files). I have disabled the kde sound system to save performance.
Note that I use jack successfully with an other computer (a desktop one) with a built in simple sound card and it works great out of the box.
Here with the G1, which is way much powerful, jack is just unusable.
Any idea anyone ?
The sound card is a HDA Intel built in a core 2 duo chipset.

Certain websites that i've accessed earlier in a day return a message saying 'Server Error in '/' Application. how can i access these websites and resolve what seems to be a continuing problem'

within the past 10 days I've started to have problems in accessing websites that I visit regularly and may have visited only hours before. The message I receive is 'Server Error in '/' Application' which gives details about how to find out more information but (1) I'm not sure how to follow the information and (20 whether the information is safe, and (3) whether following the advice will correct the problem - it doesn't sound as if it will. I'll cut and paste the information below - help received with thanks (I'll just provide the current problem site but it has happened with a number including abc.net.au and classicsonline.com amongst others
Web page error_Firefox_Feb 2011
Server Error in '/' Application.
Runtime Error
Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons). It could, however, be viewed by browsers running on the local server machine.
Details: To enable the details of this specific error message to be viewable on remote machines, please create a <customErrors> tag within a "web.config" configuration file located in the root directory of the current web application. This <customErrors> tag should then have its "mode" attribute set to "Off".

<configuration>
<system.web>
<customErrors mode="Off"/>
</system.web>
</configuration>
Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's <customErrors> configuration tag to point to a custom error page URL.

<configuration>
<system.web>
<customErrors mode="RemoteOnly" defaultRedirect="mycustompage.htm"/>
</system.web>
</configuration>

within the past 10 days I've started to have problems in accessing websites that I visit regularly and may have visited only hours before. The message I receive is 'Server Error in '/' Application' which gives details about how to find out more information but (1) I'm not sure how to follow the information and (20 whether the information is safe, and (3) whether following the advice will correct the problem - it doesn't sound as if it will. I'll cut and paste the information below - help received with thanks (I'll just provide the current problem site but it has happened with a number including abc.net.au and classicsonline.com amongst others
Web page error_Firefox_Feb 2011
Server Error in '/' Application.
Runtime Error
Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons). It could, however, be viewed by browsers running on the local server machine.
Details: To enable the details of this specific error message to be viewable on remote machines, please create a <customErrors> tag within a "web.config" configuration file located in the root directory of the current web application. This <customErrors> tag should then have its "mode" attribute set to "Off".

<configuration>
<system.web>
<customErrors mode="Off"/>
</system.web>
</configuration>
Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's <customErrors> configuration tag to point to a custom error page URL.

<configuration>
<system.web>
<customErrors mode="RemoteOnly" defaultRedirect="mycustompage.htm"/>
</system.web>
</configuration>

Java.rmi.ServerException: Internal Server Error (deserialization error: XML

I am trying to transmit a document as a byte array to a web service using jax-rpc, and I get the following error:
2004-05-25 08:04:39,468 exception [Thread-5] - [email protected]33fd java.rmi.ServerException: Internal Server Error (deserialization error: XML parsing error: com.sun.xml.rpc.sp.ParseException:58: Expected "</ns0:receivexmldocument>" to terminate element starting on line 2)
     at com.sun.xml.rpc.client.StreamingSender._raiseFault(StreamingSender.java:370)
     at com.sun.xml.rpc.client.StreamingSender._send(StreamingSender.java:231)
     at com.mobius.cmsl.client.contentindexlistener.ContentWebServiceListenerIF_Stub.receivexmldocument(ContentWebServiceListenerIF_Stub.java:63)
     at com.mobius.cmsl.adapters.convera.client.ContentWebServiceClient.sendxml(ContentWebServiceClient.java:89)
     at com.mobius.cmsl.adapters.convera.client.ContentInterceptor.doGet(ContentInterceptor.java:89)
     at com.mobius.cmsl.adapters.convera.client.ContentInterceptor.doPost(ContentInterceptor.java:110)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:247)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:193)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:256)
     at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
     at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
     at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2415)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:180)
     at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
     at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:171)
     at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:172)
     at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:174)
     at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
     at org.apache.coyote.tomcat4.CoyoteAdapter.service(CoyoteAdapter.java:223)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:594)
     at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:392)
     at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:565)
     at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:619)
     at java.lang.Thread.run(Thread.java:536)
The code looks like:
Client:
clientStub = (ContentWebServiceListenerIF_Stub)new ContentIndexService_Impl().
getContentWebServiceListenerIFPort();
clientStub._setProperty(Stub.ENDPOINT_ADDRESS_PROPERTY, endPoint);
obj = clientStub.receivexmldocument(cd.externalLink.contents,inxml);
Web Service:
public String receivexmldocument(byte docstream[],
String inxml
) throws RemoteException {
The wsdl looks like:
<message name="ContentWebServiceListenerIF_receivexmldocument">
<part name="arrayOfbyte_1" type="xsd:base64Binary"/>
<part name="String_2" type="xsd:string"/></message>
<operation name="receivexmldocument" parameterOrder="arrayOfbyte_1 String_2">
<input message="tns:ContentWebServiceListenerIF_receivexmldocument"/>
<output message="tns:ContentWebServiceListenerIF_receivexmldocumentResponse"/></operation>
The documents I am sending do contain special characters like maybe japanese or italian.

Sounds like the xml you are sending is not well-formed. Please start with simple xml documents to see if it works.

I have a Windows 7 (64) and I receive an error message that I can't sign in because of a server error.

I have two Airbooks and three IPads. I have installed the ICloud control panel on my Windows 7 (64) PC but after entering my userid and password, I receive an error message that I can't sign in because of a server error.

Hey kirk41,
Thanks for the question, that definitely sounds frustrating.
When troubleshooting issues with iCloud, backups, and issues signing in, I find that the following article provides the best steps towards a resolution:
iCloud: Account troubleshooting
http://support.apple.com/kb/TS3988
For more detailed information about troubleshooting backups, see this resource:
iCloud: Troubleshooting creating backups
http://support.apple.com/kb/TS3992
Thanks,
Matt M.

Internal server error in Requistion create - E-rec 600

Hi All,
We are in process of upgrading the 4.6c to ECC 6.0. E-rec 600 installed in the same box (server).
We wish to use the Requistion management services for creating the RR via the BSP's through WAS.
I assigned assigned manager role (SAP_RCF_MANAGER) to user1 and assigned Recruiter role (SAP_RCF_RECRUITER) to user2
When I run the requisition maintaince application REQ_MNT_LST from user1 and assigned the requistion to the recruiter (user2) every thing goes well.
In the step 9 (creating job postings) the system fails to go ahead and throws exception - Internal server error.
We have already activated this bsp service in tcode sicf and roles are assigned properly.
Is there any additional settings we need to do in spro for Job postings or any more settings in sicf ?
Please help !!! Any help in this regards would be highly appreciated. points assured. Thanks for any inputs in adavance
Regards,
Anil Kumar

I would fear that the Internal Server Error is an indication of a more serious error. Have you checked if this is generating a Short Dump (Transaction ST22)? You need to determine the actual root cause of the error, as the Internal Server Error is rather generic. You should also consider opening a support ticket on this error as this sounds more like a support issue.

Magic idv gives me a server error

I have been trying to get help with a problem in Iphoto which I cant resolve and now it has occurred in Idvd. When I click on Magic Idvd I get the following error"The server May not exist or it is not operational at this time .Check server name Or IP address and your network and try again"
The only way out of this loop is to force quit the program
Where else can I go for help? I am new Mac owner

I think I transfered them from my pc laptop back in January ,however 6 of them work fine the rest I had to erase. Still a mystery
It sounds like perhaps you transfered links for some of the images rather than the actual images themselves - that could account for the server error since there was no longer a connection to the actual images.
F Shippey

HTTP 500 Internal Server Error for BPEL Console

Hi,
I am facing a issue like "HTTP 500 Internal Server Error" while trying to access BPEL Console. We have not deployed any BPEL Portlets.
when we face this issue we have to bounce the server for the console to come up.
we are using SOA 10g (10.1.3.3.17).
Database 11g.
Please suggest how to trouble shoot the problem.
Regards
Surya

We have established the reason for the HTTP 500 error. This is due to the fact the the oc4j_soa container is down.
Now we need to understand why the oc4j_soa container is going down. You mention is goes down the same time every day. To me this sounds like there is some sort of background script running that, either crashes the instance or shuts it down, e.g. backup.
Are you able to tell me what activity is happening during the time of the crash?
Otherwise I really need to see the logs. I forget exactly where they are in 10g.
something like
{OracleHome}/bpel/domains/xxx/log {OracleHome}/j2ee/bpel/log {OracleHome}/opmn/logs
there will be a file there with oc4j_soa in the name.
cheers
James

Changed SP application pool service account - 500 internal server error

Hi all,
Trying to resolve some farm installation issues in our test environment. Long story short is that on install a previous user used our SP_Farm account to install everything and pretty much use this account to run all web applications/services.
So I am in the process of trying to resolve one portion of it by allocating a new managed account for the web application pools. I have created a new account called SP_Pool on the DC. This is just a domain user with no specific rights applied (classic authentication).
I changed the account using CA "configure service accounts" for both our mysite and SharePoint site web apps.
SP applied the new SP_Pool to the appropriate workstation groups and DB rights. Tried to hit the site and got the rather generic HTTP 500 Internal Server error. Put SP_Pool into the local admin rights group to test and was able to hit the site so something
is definitely pointing to a rights/permission issue. I was under the impression the app pool accounts did not require any local SP server rights? I have seen mention of "Impersonate a client after authentication" but that's only for Claims based
auth
I've gone through every scenario which are mentioned below:
Tried to connect from a client machine and server. 500 error
All App pools are started and SP_Pool is running both web apps
IIS bindings are same as before
no changes to the web.config
No errors in the Application event viewer
Checked iis logs and has 500 errors throughout it. The 4th number in the sequence usually changes (i.e. 500 0 0 499, 500 0 0 468 etc)
Turned on Failed Request Tracing and no issue has come up
Tried to clear the configuration cache - same deal
Ran process mon - seen nothing out of the ordinary
So based off the above is there anywhere else I could look to try and resolve this issue? Or is there something so damn obvious I've missed here? Running out of ideas
Appreciate any feedback
Thanks

Hello,
Have you tried to turn your SharePoint server off and on again ( I know , it sounds like a basic helpdesk answer but in the case of changing user account for application pool, it already fixed the issue for me)
Best regards, Christopher.
Blog |
Mail
Please remember to click "Mark As Answer" if a post solves your problem or
"Vote As Helpful" if it was useful.
Why mark as answer?

Why does opening some links in Firefox causes a "Server Error in '/' Application Runtime Error" but not in "Internet Explorer"?

When I click on some links in an email (and Firefox is the default browser) I get the following error:
Server Error in '/' Application.
Runtime Error
Description: An exception occurred while processing your request. Additionally, another exception occurred while executing the custom error page for the first exception. The request has been terminated.
If, however, I click the same links (and Internet Explorer is the default browser) I do not get any error and the proper content of the link is displayed.
What is causing this error? As I prefer Firefox, how can this problem be fixed?
OS Windows 7, Service Pack 1
Firefox Version 32.0.1
Internet Explorer Version 11.0.9600.17280
Thank you for your assistance.
Prime

When you look at the address in the address bar, does it seem to match up with the email?
Sounds like Firefox sent the server something it wasn't expecting. Sometimes this can be caused by obsolete or corrupted cookies -- assuming you have visited the site before. It also might be caused by modifications to standard information sent to servers such as the "user agent" string that specifies your browser version and OS.
To clear a site's cookies, while viewing a page on the site, either:
* right-click and choose View Page Info > Security > "View Cookies"
* (menu bar) Tools > Page Info > Security > "View Cookies"
Then try reloading the page. Does that help?

Internal Server Error - after installing apex using http server

hi,
i just installed apex 3.2 using http server. after finished, i try to to open apex admin (http://faiz:7777/pls/apex/apex_admin) but i got this error:
Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
this is my log file:
[Thu Dec 31 11:55:56 2009] [error] [client 10.10.10.10] [ecid: 1262231756:10.10.10.10:396:2036:1,0] mod_plsql: DAD '/pls/apex' is disabled because of misconfiguration. Please refer to the log entries during server startup for more information.
10.10.10.10 - - [31/Dec/2009:11:55:56 +0800] "GET /pls/apex/ HTTP/1.1" 500 645
this is my dads.conf :
Alias /i/ "E:/oracle/product/10.2.0/db/Apache/images/"
AddType text/xml xbl
AddType text/x-component htc
<Location /pls/apex>
Order deny,allow
PlsqlDocumentPath docs
AllowOverride None
PlsqlDocumentProcedure wwv_flow_file_mgr.process_download
PlsqlDatabaseConnectString faiz:1521:orcl ServiceNameFormat
PlsqlNLSLanguage AMERICAN_AMERICA.AL32UTF8
PlsqlAuthenticationMode Basic
SetHandler pls_handler
PlsqlDocumentTablename wwv_flow_file_objects$
PlsqlDatabaseUsername APEX_PUBLIC_USER
PlsqlDefaultPage apex
PlsqlDatabasePassword orcl
PlsqlRequestValidationFunction wwv_flow_epg_include_modules.authorize
Allow from all
</Location>
and ii got blank page when i try accessing this page http://faiz:1521/pls/apex/apex_admin
thanks,
-akulala
Edited by: akulala on Dec 30, 2009 7:57 PM

In your middle tier (where your dads.conf file is located), do you have a file called marvel.conf (this was used in very early versions of APEX if memory servers)? If so you will either need to put your /pls/apex entry into your marvel.conf file of configure the App Server to user the dads.conf file. (I think all of this is done in the http.conf file but I am not 100%)
Also, this sounds like a stupid question but can you ensure that you only have entry in you dads.conf or marvel.conf file that relates to /pls/apex
If you are still having issues, try updating the line: PlsqlDatabaseConnectString faiz:1521:orcl ServiceNameFormat
to: PlsqlDatabaseConnectString TNS_ENTRY TNSFormat
where TNS_ENTRY is replaced by a valid TNS Identifier in the same Mid Tier home: ORACLE_HOME/network/admin/tnsnames.ora
Finally, in earlier versions you had to use a forward slash character as the last value in the Alias line i.e. Alias /i/ "E:/oracle/product/10.2.0/db/Apache/images\". I always configure this line in this way and never seem to have an issues. Not sure if this is required anymore but may be one more thing that is mis configured.
I hope all of that helps.
Let me know how you get on.
Regards
Duncs
http://djmein.blogspot.com
As a courtesy, please remember to mark helpful or correct answers accordingly :)

Server error when signing in to iCloud?

Every time I try to sign in to the iCloud Control Panel, it doesn't allow me to. I get a message underneath saying, "You can't sign in because of a server error."
It's said this every time since I first downloaded the iCloud Control Panel. I've uninstalled and redownloaded it multiple times. Still the same.
PLEASE HELP.
Btw, I have Windows Vista, in case anyone needs to know to help answer this question.

Hi there,
That sounds strange that it would work in IE but not in Firefox. It could be that there is a cache issue with the site in Firefox. Did you follow Apple's own troubleshooting information about this at http://support.apple.com/kb/TS4050? If not, please give that a try and see if that solves the issue.

Xcode Continuous integration - latestRunSubStatus = internal-credential-server-error

Greetings.
I have been trying to make continuous integration build using Bots with Xcode 5.1(5B130a) from Xcode server (3.1.1). The SCM is configured with external svn repository, which am able to successfully browse from safari.
Am trying to make integration from server web portal & as well as using xcode from development mac. Unfortunately both are failing with "internal-credential-server-error".After chasing my tail fro quite some time, I could get rid of "Internal-checkout-error" , however got stuck again with "internal-credential-server-error".
Though I see some similar errors in other posts, none of them seem to have this particular error. Hence, wanted to know where should I be storing my SVN credentials for successful svn checkout?
Here is the excerpt of my log highlighting the error:
Apr 15 13:04:52 estmacsvr01.local xcsbuildd[70827] <Debug>: [XCSOperation.m:16 7db26310 +0ms] Executing operation: XCSCredentialOperation Apr 15 13:04:52 estmacsvr01.local xcsbuildd[70827] <Debug>: [XCSCredentialOperation.m:68 7db26310 +0ms] Processing credentials for each scm URI in ( "/" )
Apr 15 13:04:52 estmacsvr01.local xcsbuildd[70827] <Debug>: [XCSCredentialOperation.m:84 7db26310 +0ms] Processing scmItem / with credential download token JK~C]!>G!vzyVv)"e?C5j(TNAYYyI[-yV4)/ZAe|t]sfkK+f]u<\vbth^,u.0tVP
Apr 15 13:04:52 estmacsvr01.local xcsbuildd[70827] <Debug>: [XCSCredentialOperation.m:94 7db26310 +0ms] Creating credential path at /Library/Server/Xcode/Data/BotRuns/BotRun-afc45888-b5b4-4d0c-80a1-127ac3d3aa24. bundle/credentials/580b83d4-baf5-4a28-b175-cff32c7c701c Apr 15 13:04:52 estmacsvr01.local xcsbuildd[70827] <Debug>: [XCSCredentialOperation.m:104 7db26310 +0ms] Fetching credential with downloadToken JK~C]!>G!vzyVv)"e?C5j(TNAYYyI[-yV4)/ZAe|t]sfkK+f]u<\vbth^,u.0tVP
Apr 15 13:04:52 estmacsvr01.local xcsbuildd[70827] <Debug>: [XCSCredentialServerHTTPClient.m:148 7db26310 +0ms] headerDict before request: { "X-Apple-Credential-botRunGUID" = "afc45888-b5b4-4d0c-80a1-127ac3d3aa24"; "X-Apple-Credential-command" = getCredential; "X-Apple-Credential-downloadToken" = "JK~C]!>G!vzyVv)\"e?C5j(TNAYYyI[-yV4)/ZAe|t]sfkK+f]u<\\vbth^,u.0tVP"; }
Apr 15 13:04:52 estmacsvr01.local xcsbuildd[70827] <Error>: [XCSCredentialServerHTTPClient.m:155 7db26310 +139ms] Got a nil response to a download credential request
{ "X-Apple-Credential-botRunGUID" = "afc45888-b5b4-4d0c-80a1-127ac3d3aa24"; "X-Apple-Credential-command" = getCredential; "X-Apple-Credential-downloadToken" = "JK~C]!>G!vzyVv)\"e?C5j(TNAYYyI[-yV4)/ZAe|t]sfkK+f]u<\\vbth^,u.0tVP"; }
Apr 15 13:04:52 estmacsvr01.local xcsbuildd[70827] <Debug>: [XCSCredentialOperation.m:109 7db26310 +0ms] Credential callback fired credential = (null), error = Error Domain=XCSCredentialErrorDomain Code=-1 "HTTP credential request failed, got HTTP status 400 with headers
{ "Accept-Ranges" = bytes; "Content-Length" = 0; Date = "Tue, 15 Apr 2014 07:34:52 GMT"; "X-Apple-Credential-error" = itemNotFound; }"
UserInfo=0x7f91e4122ae0 {NSLocalizedDescription=HTTP credential request failed, got HTTP status 400 with headers
{ "Accept-Ranges" = bytes; "Content-Length" = 0; Date = "Tue, 15 Apr 2014 07:34:52 GMT"; "X-Apple-Credential-error" = itemNotFound; }}
Apr 15 13:04:53 estmacsvr01.local xcsbuildd[70827] <Error>: [XCSCredentialOperation.m:111 7db26310 +0ms] Failed to get credential with error Error Domain=XCSCredentialErrorDomain Code=-1 "HTTP credential request failed, got HTTP status 400 with headers { "Accept-Ranges" = bytes; "Content-Length" = 0; Date = "Tue, 15 Apr 2014 07:34:52 GMT"; "X-Apple-Credential-error" = itemNotFound; }" UserInfo=0x7f91e4122ae0 {NSLocalizedDescription=HTTP credential request failed, got HTTP status 400 with headers { "Accept-Ranges" = bytes; "Content-Length" = 0; Date = "Tue, 15 Apr 2014 07:34:52 GMT"; "X-Apple-Credential-error" = itemNotFound; }}
Any help is greatly appreciated!

Did anyone find a way around this? I have the exact same error and tried the exact same solution.
The Xcode 5 release notes described a problem that sounds similar.
Communicating with a remote SVN repository over HTTPS can fail with an error similar to “Error validating server certificate for server name.” Edit the file /Library/Server/Xcode/Config/xcsbuildd.plist and change the TrustSelfSignedSSLCertificates key from false to true. Then, from a Terminal window, run: sudo killall xcsbuildd. 14639890
https://developer.apple.com/library/ios/releasenotes/DeveloperTools/RN-Xcode/Cha pters/xc5_release_notes.html
I haven't found a similar fix for Xcode 6 though.

Sound Server error in KDE

Similar Messages

Maybe you are looking for