Sound software

sorry for the off-topic, but I don't know where to ask this:
can someone give me the name of an app I could use to edit out some of the background "snap, crackle, and pops" in audio files?

dsdfsdf

Similar Messages

K7N2 Delta-L: sound software utility?

K7N2 Delta-L: sound software utility?
I want to set the back panel to 6 or atleast 4 channel audio, however the manual says that after you've run the nForce driver setup there should be a software utility you can run to set onboard audio options. The only audio options availiable though are the windows XP default. I've reinsalled the drivers, but the software is not loading. I'm sure this is a common error and would like your input. Thanks

Alright...I'm an Idiot. For any other idiot, a link to the thread with the solution is below:
SOLUTIONthe thread with the solution is below:

Does anyone know how to access the sound software on a Mid 2010 Mac Pro? I have a Logitech Z906 5.1 surround system with fiber optic in and out, I only seem to be able to get stereo and simulated 5.1 sound .

A mid 2010 Mac Pro, trying to get 5.1 surround out of the onboard sound software using fiber optic out connected to a Logitech Z906 5.1 speaker sys. with fiber optic in and out, all I get is stereo and simulated 5.1 sound out of the speakers. In utilities, Audio Midi Setup I can't get the Mac to see the Logitech speakers for 5.1 speaker configuration. Without being made to feel like a dummy, does anyone have a solution? Thanks, Carl

Hello John, I figured it was a signal issue. All the speakers fire and the sound is great. I was running the speakers thru a Dell PC with a Creative X-Fi Elite Pro, THX Certified, 7.1 soundcard using a fiber optic from the Mac Pro to the Z906's, it worked great until the Dell died!!! When I bought the soundcard from Creative I also bought the GigaWorks S750, THX Certified, 700 watt, 7.1 speaker system, used the speakers for 11 years and then the woofer/amp said "I QUIT" Creative quit making the speaker system and the sound card. The satellite speakers from the Creative GigaWorks speaker system still sound great (rated at 78 watt each) and are a little better speaker than the one's that came with the Z906 and the wattage from the 906 is sufficient to drive the satellites without any distortion. Thank you for addressing my issue, you confirmed what I suspected all along, just needed to hear it from someone with the same setup.
One last question, I purchased a Diamond Multimedia USB Soundcard, can't use the fiber optic(not supported by Mac) but the green, tan and black RCA's plug in and produces adequetly. When you plug your 906's into the Mac Pro using the fiber optic how do you set your speaker configuration? When I plug into the mac pro with fiber optic the 'Audio Midi Setup' does not seem to see the 5.1 configuration. Any thoughts there?
Carl

Notebook moddel hp mini 110-3100 sound software

download notebook moddel hp mini 110-3100 sound software(window xp)

Hi,
Please download and install the following driver on your machine:
ftp://15.240.238.51/pub/softpaq/sp48501-49000/sp48874.exe
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

No sound. software cannot locate speakers.

Laptop - HP Pavilion g6
Windows 7 Professional
No sound. Software is on system. Upgraded to Windows 7 from home to professional. Do I need to install the drivers again and where do I get the drivers from?

Hi,
To locate the driver, can you post back with the full Model No. and Product No. of the notebook ( from the service tag underneath your notebook ).
Also check the folowing.
Open windows Control Panel, open Administrative Tools and open Services. Check that the following services are all showing as Status= Started and Startup Type= Automatic
Audio Service
Multimedia Class Scheduler
Windows Audio
Windows Audio Endpoint Builder
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Sound software problems

i have a msi k7n2(nforce2), im having a problem with making the line in and mic jacks converting to rear out and sub/center out. i cant seem to get the nvidia nforce control panel to install. everytime i run the exe it says "failed to initialize the nvdia audion driver! please install and try again." what is going on here? iv installed the drivers from the nvidia website and msi website. the 2 front speakers work fine. im thinking about formating and installing win 98 c if it fixes the problem.
im running:
windows xp (service pack1)
xp2600
msi k7n2 (nforce2 chipset)
radeon 9700 pro
512 pc3200 cl2 mem
and a 60gig maxor hd
any help would greatly be appreciated, i just got some logitech z-680 speakers and i would really like to use all of the speakers

i am working in windows, i have it set to 5.1 speakers, and in the advanced tab in volume control i have the 2 checkboxes clicked. tho the software that it comes with wont install due to the error. do you have to have the optional s-bracket for 6 channel audio?, my friend has a aesus mb, and his line in and mic convert to rear out, and sub.channel. and the msi manual that came with my MB and the online manual say i can do this though the software, but the software wont install i keep getting
"Failed to initialize NVDIA audio driver! Please install and try again" and yes the driver is installed i tried doing this on win 98, win2k, and winxp with different versions of the driver. i get the same error all on OS's and driver versions, and to make sure the ports wernt dead i unchecked the sub/center speaker button in the advanced tab under volume control and plugged a mic in it worked fine, then i rechecked the box plugged the sub/center plug back in and no sound. do i need a new MB?
btw, my MB didnt come with the audio S-bracket, should it have? it has the pins on the MB for it, if so does any1 know where i can get it?

Looking for a sound software

hi all,
I'm looking for a small sound manipulation software that would enable me cut out some parts of an mp3 song.
My objective is get the part of the MP3 song that I like (The Muppet Show theme) so that I can use it as a ring tone in my mobile phone.
I don't know if this is possible with Garageband.
Thank you in advance,
Johannes
Ps: I apologize for posting this message in this section. I couldn't find a more suitable forum.

Johannes,
You can certainly do it in GarageBand, although not the most ideal method I guess:
Open Garageband. Drag and drop the MP3 into the Garageband window and it will import the file. Highlight/Play the track and choose where you want to edit the track using the play marker. Choose Edit->Split to separate the bits of the track you want (repeat as appropriate). Next highlight the bits of the track you don't want to keep (you can hold down Shift to highlight multiple sections) and press delete (you may need to click off the track and back on to the bits you're deleting) - this should leave you with the bit of the track you want.
When you have finished you can export it to iTunes: File->Export to iTunes. The file in iTunes is an AIF file that you can then convert to MP3 again (and do what you like with!)
Alternatively, you could try Audacity, a free Sound Editor, at: http://audacity.sourceforge.net/ (I've not used it myself yet, but I'm guessing it's a more direct method!).
I hope that helps,
Jon

Apple Mini-DVI to DVI Adapter problem: no sound.

I couldn't find a more suited thread to discuss my issue so, this can be moved in deemed necessary. I recently purchased a DVI cable, seen below, but all I can get is the video to work. When I use the appropriate yellow cable for sound, the TV won't pick it up. It really seems like this is something that can't be fixed, but I figure it is worth asking about. Thanks.
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wo/StoreReentry. wo?productLearnMore=M9321G/B
Message was edited by: grant87

The yellow cable is likely not an audio cable, but an S-Video cable, useful for some projectors that don't have a VGA or DVI port, or many TVs which only support S-Video. If you want audio separate from the computer, most speaker systems at least support RCA Red/White left/right channel sound into the 1/8th inch audio port found on most Macs. Some Macs and sound software as outlined here offer additional channels for sound:
http://discussions.apple.com/thread.jspa?messageID=2458613&#2458613
I've never seen a yellow colored cable used for audio.

HP Pavillion: No Sound after System Recovery

Due to problems with Norton Security, I had to do a complete system restore to factory defaults. I then removed Norton Security, Installed Trend Micro, and restored by backup making sure not to include any Norton folders/files.
While working on the computer, I noticed that the HP Advisor program would start and then I would get a message from Vista saying it was no longer working. I checked on the internet and decided to remove the program.
Everything else seems to be working except the sound. I know the speakers are getting power, I have checked the device and disabled and re-enabled it, checked the mute button, checked the volume in 3 places (software, keyboard, sound device) and still nothing.
I tried going to HP and downloading an updated driver - ha ha, My computer wouldn't boot and I had to back it off.
On the Control Panel -> Sound, I have two icons:
1) Speaker, Realtek High Definition Audio, Working (with a little green circle and checkmark)
2) Realteck Digitial Output, Realtek High Definition Audio, Working (no circle with arrow)
The speaker wire is "grey" which plugs into the "grey" "Side" connection on my computer.
I am assuming this means one of a few things:
1) the current driver files are corrupted somehow
2) the registry is hosed for the sound software (are there any hooks in the registry for sound??)
3) something did not get restored properly or was removed with the HP Advisor program
Can anyone shed some light on where I can get the original driver files to reinstall??
Thanks.

WCM, normally when you have sound problems after a System Restore, it can be traced to settings in the Control Panel. I would check all of them. If that doesn't work, reinstall the sound device driver to see if that helps. Also, check to see that your sound device is selected as the default.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

I'm a new user and learning, I bought and installed Premiere Pro cs6. I got a nice video clip but has a baby cried in the background and very annoying. My question is, is this noise remover is separate from the cs6 or I need to get this software downloa

I'm a new user and learning, I bought and installed Premiere Pro cs6. I got a nice video clip but has a baby cried in the background and very annoying. I have tried all of the sounds in Prem cs6 but didn't work. My question is, do I need to get a separate sound software download and install to be able to use it?

In the CS versions, there was some audio capability in PrPro but you needed to get a separate audio program for major work. Lessening a baby definitely qualifies as major work. That's lessening, i dont mean eliminating. Adobe's audio program is Audition. There are others "out there'. In the CC versions one just downloads Audution also.
Neil

USB 5.1 Sound card

Hello,
I've got sound card - 14134 5.1 External Surround Sound Card, arch see that card but i cant change output voice on that card. Dont know what i should post here more to take help.
Please help me.

McQueenNewbie wrote:Dont know what i should post here more to take help.
Start by posting:
What sound software you run.
What you have already tried, and what results those actions gave
What wikis/howtos you have followed and at what point these failed for you

How to convert mp3 software instrument samples to format garageband can use

Hi and thanks in advance.
I'm using GB '08 on OSX 10.4.11 w/ a G4 MDD. ( Sorry folks, This is the setup that I have and cannot buy a new computer or software at this time)
I'm pretty new too DAW and all of this but want to compose music with traditional orchestra sounds as well as what GB offers.
I have found Muse Score and I can get some pretty good results for writing but I want to expand the software instrument voices that GB has.
I found http://www.philharmonia.co.uk/thesoundexchange/make_music/samples/library/
and they have some pretty good sounding software instruments for free, except that they are in mp3 format.
I did some reading and see that GB understands a different format for this. I put some of the sounds into the correct GB folder as a test and result is of course no go. I see that GB uses exs and cst files in addition to wav and aff files.
How do I convert mp3 software instrument samples to the formats garageband can use? Is there a way? What would I need to do this?
Thanks again..

The first step would probably be to convert the samples into AIFF files, that's what GB's sample files are in.
But so far that's only a collection of samples - what you need is a sampler file that tells the software which sample to trigger with which key (the .exs files in GB's instrument library).
Since your software is old, t works pretty well with soundfonts (the latest versions have problems), so you might try this software to create them:
http://sonicamigos.com/polyphontics/
All about soundfonts:
http://www.bulletsandbones.com/GB/Tutorials/SoundFonts.html
P.S.: The softare costs $60, but you can create 10 instruments for free.

Equium M50-163 has sound problems - permanent echo

As the title suggests, my Toshiba laptop has some problems with sound. For almost a good 7 months now (I think I got used to the sound, I don't hear an "echo anymore) my laptop sound, be it music or speaking in a movie, has a permanent 'echo' sound (as if the sound was on hall mode).
There is also little to no bass. I've tried adjusting the sound settings but nothing helps, and it isn't the laptop speakers because the sound is the same with external speakers connected to my laptop.
Can anyone help me?
Thanks so much

Hi
Do you have this echo effect only watching movies or did you notice this playing games or streaming a video from the internet???
From my experience many different 3rd party applications support additional sound effects. Such settings could be responsible for you echo.
I can remember also that the M50 series supports the virtual sound software. This little program changes sound effects too.
Check this. You should find it in the Toshiba Utilities folder.
As far as I know you can change the sound settings for built-in speakers, external speakers and headphones
Choose the built-in speakers and opens details settings.
There are some options which could create the echo effect
Bye

G60-458DX Windows 8 upgrade NO SOUND...have tried "everything!"

Greetings,
I have an older G60-458DX notebook that I upgraded to Windows 8 64-bit.
I have lost sound from both the internal speakers and anything plugged into the headphone jack. I can see levels fluxuate on the taskbar volume control when I move the slider.
I have tried the following with no success amoung other things:
Used Windows troubleshooting feature in Windows 8
Disables and enables the drivers for sound device as well as tried to upgrade the drivers (already the most current)
Checked all sound software access points
Some of the research I read indicated that HP was not going to support older hardware with driver updates for Windows 8. Is there a workaround for this issue? Could I used a USB external soundcard and bi-pass the non-fuctioning drivers?
This is my wife's computer and while she likes Windows 8, she NEEDS SOUND. Thank you!

Brett,
You are "far and away up the soundless creek" and I offer you a paddle:
Running Drivers and Software in Compatibility Mode by AttackOfZaq
There is a hope this will work to bring sound where there is now silence.
It is possible that it may turn out to be a very small paddle in a very large creek.
Good Luck!
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
See a Post that is useful, makes you smile, or that teaches you something you did not know?
Your HP Experts are here to help.
Click the Kudos Star! It is a great “Thank You” for the Author.
Solved? Click this Post "Accept as Solution" to help others find a Fix.
Year of the Dragon 2012 Year of the Snake 2013
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Kind Regards,
Dragon-Fur

Mega TV Tuner for Mega PC 180 giving a clicking sound

Can anyone help me, I bought the Mega TV tuner for the Mega PC 180 and all I get is picture, but no sound except a clicking sound? I have tried downloading the latest drivers, which make no difference.
I am Totally annoyed
PC : Mega PC 180
OS: XP Pro SP1
Processer: AMD XP 2800+
Ram: 512 DDR333
HDD: 120Gb
DVDwriter: Pioneer A07

Few things to check.
If the sound software is the same as the 865 , make sure you haven't configured your sound card to 4 way sound (if you have then the line in will become your second set of speakers) If you need 4 speckers then plug the cable from your TV card into your mic. Again I am unsure of the TV card so if it has an internal sound cable connection then this would be the best to use and plug it in to the TV sound socket on board.
Next you need to make sure what source you have pluged it into is not muted. Normally when the software mutes the card it mute the line that the card is meant to come in on. So start up the software then check this input.
Last how have you set up the software as this need to know the import. Normally it is line in but this is not always the case.

Sound software

Similar Messages

Maybe you are looking for