Sound starts muted on reboot

Every time I reboot under Yosemite, the sound setting starts muted. Anyone else get this problem?

I have the same problem only on an early 2008 MacPro

Similar Messages

MSExchangeSA and IS is not starting automatic at reboot after upgrading the server from SP1 to SP2

I am running a 2 node DAG with separate Hub & CAS servers
I have already upgraded the Hub CAS server and they are fine
Exchange running on Windows 2008 R2 SP1
All are in VM-Ware ESXi 5.0
After I upgrade the mailbox server to SP2 the SA and IS service not starting automatic after reboot
If I run "net time /set" command and then restart ADtopology server, the IS and SA starts fine
But again after reboot they do not start
Also I get the below event in the app log when the IS & SA fails to start
Log Name: Application
Source: MSExchangeIS
Date: 05/22/2012 5:15:03 AM
Event ID: 5003
Task Category: General
Level: Error
Keywords: Classic
User: N/A
Computer: server.domain.com
Description:
Unable to initialize the Information Store service because the clocks on the client and server are skewed. This may be caused by a time change either on the client or on the server, and may require a restart of that computer. Verify that your domain is correctly
configured and is currently online.
If I check the Registry for time resource it is taking from the DC
I manually compared the time between DC and Exchange and it is fine
Since the Exchange mailbox is virtual, I checked the time sync on VM-Ware tools and it is "unchecked"
Checked for group policy and do not find any specific to time sync.
Confirmed that Windows Time service is running
Suspecting a Operating system issue, tried to upgrade the other DAG
Even that node is displaying the same symptom and Issues
Tried to install RU1 on both nodes and that too did not fix the issue.
Checked with VM-Ware engineer and he said that every thing from VM-Ware end is fine
Is Anyone have come across the issue before ?

Exchange 2010: Unable to initialize the Information Store
Problem:
Unable to initialize the Information Store service because the clocks on the client and server are skewed. This may be caused by a time change either in the client or the server, and may require a reboot of that computer. Verify that
your domain is properly configured and is currently online.
Solution:
Open a cmd prompt from the Exchange Server as administrator (right mouse click on the command prompt shortcut and select “Run as Administrator”)
Run this command
Net time \\ADServerName /Set
Restart the Microsoft Exchange Active Directory Topology Service
*Important!! You have to restart the Microsoft Exchange Active Directory Topology Service or this fix will not work.. I tried just starting the Information Store service after running the command it it still failed..
This worked for me and all is well on my exchange server.
- See more at: http://www.mountainvistatech.com/2012/06/04/exchange-2010-unable-to-initialize-the-information-store/#sthash.SwQpgQEM.dpuf

Ias-component doesn't start after linux reboot

Hi,
i've successfully installed the oracle infrastructure. it's all working until i reboot my rhes3 server, all the opmnctl ias-component are stopped/NONE and did not start automatically.
how can i configure the oracle infrastructure to start automatically after reboot?
dcm-daemon, oid, oc4j were all stopped and i couldn't restart it either.
thanks.

In my opinion, it is better to manage the starting and stopping of all Oracle services yourself - rather than leaving it to the OS to do this for you - there are many reasons for this......for instance - if you are running on a split tier configuration, and there is something wrong with the listener for your repository, then the mid tiers will not come up until the repository is up - and so on and so forth....
I have one script that calls three scripts that check, stops or start all oracle services. I have the OID and portal tiers on one server - the start script is given below - and the stop and check scripts are all variations of this start script. Hope this helps.
#!/bin/bash
# - DATE
# This scripts starts all Oracle Services on SERVER_NAME
# Start the EM console on SERVER_NAME - Infra (Mid) Tier
echo "Starting the EM Console on the Infra Tier"
/u01/app/oracle/product/OAS/10.1.2/infra/bin/emctl start iasconsole
/u01/app/oracle/product/OAS/10.1.2/infra/bin/emctl status iasconsole
# Start EM Console on SERVER_NAME - Portal (Mid) Tier
echo "Starting the EM Console on the Portal (Mid) Tier"
/u02/app/oracle/product/OAS/10.1.2/portal/bin/emctl start iasconsole
/u02/app/oracle/product/OAS/10.1.2/portal/bin/emctl status iasconsole
# Start Services on the Infrastructure tier - including OID, HTTP Server
# and OC4J_SECURITY
echo "Starting Oracle Services on the Infrastructure Tier"
/u01/app/oracle/product/OAS/10.1.2/infra/opmn/bin/opmnctl startall
echo "Status of Oracle Services on the Infrastructure Tier"
/u01/app/oracle/product/OAS/10.1.2/infra/opmn/bin/opmnctl status
# Start Services on the Portal (Mid) tier - including Portal, OC4J_Portal,
# Forms, Discoverer and OC4J_SECURITY
echo "Starting Oracle Services on the Portal (Mid) Tier"
/u02/app/oracle/product/OAS/10.1.2/portal/opmn/bin/opmnctl startall
echo "Status of Oracle Services on the Portal (Mid) Tier"
/u02/app/oracle/product/OAS/10.1.2/portal/opmn/bin/opmnctl status

Sound keeps muted, iTunes doesn't play songs

Sinds a week or two sometimes when I boot my mac my sound doesn't work. My sound keeps muted and I can't turn the volume up because it's unclickable grey.
Someone told me to do the "cmd + ctrl + n + v"-trick and that sometimes helps me but the problem keeps coming back. Also iTunes doesn't want to play my songs, it keeps stuck on 0:00.
In my sound-systempreferences everything seems okay.
My specs are:
- iMac mid 2012 running OSX lion 10.7.4
- Processor 3,4 GHz Intel Core i7
- Memory 12 GB 1333 MHz DDR3
- Video AMD Radeon HD 6970M 2048 MB

the same thing is happening to me as well since I upgraded to the latest version of iTunes. My sound beeps now in everything, from email notifications, to music. But iTunes won't play any songs that I select. Hope to get some feedback.

At what level does your sound start coming through?

Hello, I have had a look at previous discussions regarding sound issues but have not come across an answer for this particular one. On the bar level, my sound starts coming through at about the 6th one from 0%, is this normal for a brand new Intel core 17"? I only found this out by playing a CD today and wondering why there wasn't any sound even though the sound level was halfway....When do your sounds start coming through? My G3 sound started a lot earlier and halfway was loud enough so I am finding this a bit strange
Btw, I have looked at the System Prefs and it all seems OK.
Thanks

Hello, I have had a look at previous discussions
regarding sound issues but have not come across an
answer for this particular one. On the bar level, my
sound starts coming through at about the 6th one from
0%, is this normal for a brand new Intel core 17"? I
only found this out by playing a CD today and
wondering why there wasn't any sound even though the
sound level was halfway....When do your sounds start
coming through? My G3 sound started a lot earlier and
halfway was loud enough so I am finding this a bit
strange
Btw, I have looked at the System Prefs and it all
seems OK.
Thanks
Has anyone anything further to say on this? I would like to know if it is normal for the sound to come through on the 6th bar as I find it very strange...
Thanks

Microphone starting muted on AIR application SDK 2.5

According to the documentation
http://help.adobe.com/en_US/air/reference/html/flash/media/Microphone.html
"Content running in the AIR application sandbox does not need permission to access the microphone and no dialog is displayed. AIR content running outside the application sandbox does require permission and the Privacy dialog is displayed"
But I'm having problems starting the Microphone object, which starts muted and permissions need to be given right clicking on the flash object.
This function returns always true before permissions is given:
public function isMuted():Boolean {
var mic:Microphone = Microphone.getMicrophone();
return mic.muted;
The swf loaded is inside the application sandbox, but it's failing also from the debugger.
Any ideas what else to look?
Thanks,
Guille

Updated note:
This might be a possible work around...
The limitations I mentioned in my previous email apply when including the SWF file ‘for rendering’ – i.e. when using an <object/> tag.
In AIR a developer can include a SWF file as a script – i.e. using a script tag like so: <script src="lib/applicationupdater_ui.swf" type="application/x-shockwave-flash"></script>. When doing this, the SWF is loaded in the application sandbox and JavaScript can call AS functions as if they were JS functions.
If the customer’s code doesn’t depend on displaying things (or the UI part is reasonably well separated from the rest of the logic), it should work without any changes. If not, it might require some changes, but still not as radical as rewriting their code to JavaScript. A simple example of using a SWF in this way can be found at http://www.stratulat.com/blog/update-your-javascript-air-application-with-ease - it shows how to use the Application Updater library (a SWF) in a JavaScript application. This could be a starting point for the customer about how to use a SWF as a script and how it should “look like” in order to be used this way (as the framework is open-source).

DB Instance fails to automatically start on cluster reboot

Hello -
I cannot get the instance on node1 to automatically start on a reboot. It starts manually, and it starts automatically when the other node is rebooted. I also unregistered it, and re-registered the instance.
Here is the errors from $ORA_CRS_HOME/log/ctolinuxpoc01/crsd/crsd.log:
2009-02-03 15:52:08.496: [ CRSAPP][1494882624] StartResource error for ora.ractest.ractest1.inst error code = 1
2009-02-03 15:52:10.098: [ CRSRES][1494882624] Start of `ora.ractest.ractest1.inst` on member `ctolinuxpoc01` failed.
I do see for the DB instance log these errors:
<txt>ASMB (ospid: 4422): terminating the instance due to error 15064
</txt>
</msg>
<msg time='2009-02-03T15:43:25.399-05:00' org_id='oracle' comp_id='rdbms'
client_id='' type='UNKNOWN' level='16'
module='' pid='4149'>
<txt>Errors in file /opt/app/oracle/product/11.1.0/diag/rdbms/ractest/ractest1/trace/ractest1_diag_4149.trc:
ORA-27508: IPC error sending a message
ORA-27300: OS system dependent operation:sendmsg failed with status: 22
ORA-27301: OS failure message: Invalid argument
ORA-27302: failure occurred at: sskgxpsnd1
</txt>
</msg>
<msg time='2009-02-03T15:43:25.399-05:00' org_id='oracle' comp_id='rdbms'
client_id='' type='UNKNOWN' level='16'
module='' pid='4149'>
<txt>System state dump is made for local instance
</txt>
</msg>
<msg time='2009-02-03T15:43:25.399-05:00' org_id='oracle' comp_id='rdbms'
client_id='' type='UNKNOWN' level='16'
module='' pid='4149'>
<txt>System State dumped to trace file /opt/app/oracle/product/11.1.0/diag/rdbms/ractest/ractest1/trace/ractest1_diag_4149.trc
</txt>
</msg>
<msg time='2009-02-03T15:43:26.589-05:00' org_id='oracle' comp_id='rdbms'
client_id='' type='UNKNOWN' level='16'
module='' pid='4149'>
<txt>Trace dumping is performing id=[cdmp_20090203154325]
</txt>
</msg>
<msg time='2009-02-03T15:43:26.727-05:00' org_id='oracle' comp_id='rdbms'
client_id='' type='UNKNOWN' level='16'
module='' pid='4422'>
<txt>Instance terminated by ASMB, pid = 4422
</txt>
</msg>
The ASM instance was automatically started, and I am able to manually start the instance without any problems.
Any help is appreciated!
Thanks,

ASMB (ospid: 4422): terminating the instance due to error 15064oerr ORA 15064
15064, 00000, "communication failure with ASM instance"
// *Cause: There was a failure to communicate with the ASM instance, most
// likely because the connection went down.
// *Action: Check the accompanying error messages for more information on the
// reason for the failure. Note that database instances will always
// return this error when the ASM instance is terminated abnormally.
ORA-27508: IPC error sending a message
ORA-27300: OS system dependent operation:sendmsg failed with status: 22
ORA-27301: OS failure message: Invalid argument
ORA-27302: failure occurred at: sskgxpsnd1What is the output from following command?:
/sbin/sysctl -a|grep net.core|egrep 'wmem|rmem'

When using FaceTime, all other sounds are muted. This defeats functionality. When will this be corrected?

When using FaceTime, all other sounds are muted. This defeats functionality. When will this be corrected? Does anyone know of a "fix" for this problem? This definately is NOT a feature.

yes, that is exactly what mine did too. I noticed that something is wrong after receiving calls and did not hear anything.
It was like the IPhone did not realize that the headphone is not any longer plugged in. I m not sure weather I plugged/unplugged the headphones after this more than once but it startet working correctly.

IPad mini hangs on the Internet. Will not start. Have rebooted the home and on / off. There is internet in the house (using it now). Getting the message: Safari can not open the page ...... What do I do?

My IPad mini hangs on the Internet. Will not start. Have rebooted the home and on / off. There is internet in the house (using it now). Getting the message: Safari can not open the page ...... What do I do?

Try this:
1. Close all inactive apps in the Task Bar. Double-click the Home button and hold apps down for a second or two. Tap the minus sign to close app.
2. Hold the Sleep and Home button down for about 10 seconds until you see the Apple Logo.

Walkman sound remains muted after missed call on headset

I've noticed on my Z1C that if I receive a call while playing music through the headset, the music mutes to play the incoming call ringtone as expected. However, if I do not answer the call, the walkman continues to play the track again, but the sound is muted. I have to press pause, then play, to hear the sound again.

Thank you for the feedback. Could you state which headset your are using?
- Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Automatically start oracle after reboot

Is there a way to automatically start oracle after reboot? Our platform is Soaris 10 and Oracle 10.2.0.1.0

(1) Don't forget to edit $ORACLE_HOME/bin/dbstart. (Note:337927.1)
Original line:
ORATAB=/etc/oratab
Modified line:
ORATAB=/var/opt/oracle/oratab
(2) As per Note:336299.1 use:
dbstart $ORACLE_HOME
or
dbstart /u01/app/oracle/product/10.2.0 (or whatever is your Oracle_Home)
or you'll get: "ORACLE_HOME_LISTNER is not SET, unable to auto-start Oracle Net Listener"
HTH
Enrique

2 or 3 second sound start delay

I'm using the optical sound output into a receiver, and I find that there is a 2 to 3 second delay in sound starting. So, for example if there has been no sound for a while, then if I select a song, then I miss the first couple of seconds.
More importantly, if I'm not playing music, then it means that I miss the system sounds as they tend to be less than a couple of seconds long.
I can hear the audio clicking off through the speakers if there is no audio activity for a while.
Any ideas on this?

Well, I thought it was solved but that App makes my sound lock up about once a day requiring a restart.
There must be a solution to this as I've seen loads of posts on the same subject, mostly relating to MacBooks.
What is clearly happening is that the audio is going to sleep after a period, and when it's waking, the first second or so of the sound gets missed. Now, when that is system sounds, they get missed completely!
Oh, I should say I've tried KeepSoundAwake as well.
Anyone?

I recently buy an apple iphone 4s.the problem is that when i started music player on my iphone the speaker is not outputting the sound.and when i lock the phone at the same time the sound starts.thos problem is from last 3 days.and i am really confused???

i recently buy an apple iphone 4s.the problem is that when i started music player on my iphone the speaker is not outputting the sound.and when i lock the phone at the same time the sound starts.thos problem is from last 3 days.and i am really confused???

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
If the issue continues, take the device to Apple for evaluation and possible replacement.

Every time i go on the internet the sound starts messing up but only when connected to the internet.

1- Product name and number: Compaq CQ57 302EA 4GB
2- Operating system installed: Google Chrome, Windows 7 (was already onlaptop when got new from store)
3- Error Message: From bullgaurd saying I have a virus but have sorted the problem and there is no virus no longer.
4- Any changes made to your system before the issue occurred: I have installed games and music of the internet.
5- In the subject title, include a brief, specific description of the problem, and your product information: Compaq Laptop. Every time i go on the internet the sound starts messing up but only when connected to the internet what can i do to fix this problem?

#You need to check your home page settings if the pages open immediately everytime you start Firefox.
#Sometimes, things that you download and install will change your home page. When installing anything, be observant, be sure to look for check boxes during install of anything that allows you to un-check items and not install toolbars and/or make changes to your home page.
#Firefox can have multiple home pages separated by the "|" keyboard character.
#It sounds as though your home page setting might be: "When Firefox starts: Show my windows and tabs from last time"
#See: http://support.mozilla.com/en-US/kb/How+to+set+the+home+page
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You need to update some plug-ins:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]

When I start the firefox browser since afternoon a pac man sound starts coming and doesnot stop

when i started the browser today early morning us time, a strange ambulance/police siren type of sound started coming and would not stop. It stops and starts with shutting down firefox. I have tried to uninstall and install but no effect
== This happened ==
Every time Firefox opened
== today early morning us time

I contacted the supplier, Cooliris. They gave me a link to an updated cool previews that solved the probelm for me:
Hi there!
Thanks for your email.
We are aware of this issue and have issued a version upgrade that fixes the issue.
You can download it here:
http://www.coolpreviews.com
If you still have issues after you restart Firefox please let me know.
Cheers,
Jeff & the Cooliris Team

Sound starts muted on reboot

Similar Messages

Maybe you are looking for