Sound static...

Hello. After hooking up my ipod to my stereo, it has now begun to have muffled sound and static noises when the wire is twisted. It is not a bent headphone pin issue as there was no trauna to induce such. Could I have a fried sound processor, or something of the like?

The only problem is I don't have a big enough computer hard drive to copy all of my ipod's songs onto. Is it possible to use this :http://www.sendstation.com/us/products/pocketdock/lineout-usb.html
As a headphone jack?

Similar Messages

  • Sound static when moving around in gChrome and firefox

    MSI 880GMA- E45
    Maybe you guys can help me.  I have this strange problem with my sound when I switch/ move around ( open new tabs, scroll up and down in a window) in internet browsers (worst in chrome). I sometimes hear it when I am playing music ( in winamp, windows media ) and WoW at the same time but mainly in the browsers. It sounds like a crackling static sound from my speakers. A few times my music was slowed.
    I updated all my drivers for everything! All connections are secure and tested by turning them and making sure they are in the jacks.
    Any idea what could be causing this?

    Quote
    Its not a buzzing a sound its a static crackle when i scroll in a internet window and move tabs. its like the sound just cant keep up?
    I don't know how to describe it in english, but it souds like yours.
    I'm a bit doubtful about your power supply, but... Are you sure the sounds does'nt come from it ?
    The Vcore thing, just try another setting than "auto" for CPU (between 1,20V and 1,35V for exemple, the lower the better if otherwise stable), to see if the sounds disappears or not.
    Edit : is your memory her http://www.corsair.com/products/phenomii/default.aspx ?

  • Why is my movie sounding static

    Every time I try to play a movie the audio is all static! Why and how do I fix it? This is a brand new hp touch screen laptop it should have good sound quality!

    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
    If that doesn't help, reset all settings. Settings>General>Reset All Settings. you will have to enter all of the device settings again, but you will not lose any data.

  • Speaker sound static

    okay so i was doing a little hardware upgrade on my hp dc 5750 tower (putting new dvd writer and a hardisk) and when i finished what i was doing i touched with my screwdriver the point where the speaker is connected with the red and black cables and it started 2 make these weird static noises i thought it was a onetime thing but its on for 2 days nows and its really annoying and also when i plug in my earphones they work fine so anyone with a suggestion of how i can put off that annoying sounds

    Can you clarify? Which speaker? Is this an external speaker set?  Did you short-out a discrete sound card?
    I am a volunteer. I am not an HP employee.
    To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
    The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
    (2) HP DV7t i7 3160QM 2.3Ghz 8GB
    HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
    Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Both Customs use Rosewill Blackhawk case.
    Printer -- HP OfficeJet Pro 8600 Plus

  • Music sounds static when played through headphones or speakers

    i have had my ipod for a while now and it worked fine. However whenever i play through headphones or speakers the music goes to what sounds like static, i would like to know how to fix this problem and if i cant how much will it cost to have apple fix it for me.

    Update - I've isolated this (I think) to be something that happens when Microsoft Outlook for Mac 2011 is open. Exiting the app stops the noise.
    But still con't find out why it happens or any setting to stop it.
    cheers

  • K8n plat SOUND STATIC

    -HEADPHONES. DIRECT FROM ONBOARD SOUND. I GET ALOT OF STATIC IT SEEMS TO INCREASE WITH CPU WORKLOAD.
    if i use "optical" to receiver and run headphones off that i dont get any background static.
    but this static is very loud and noticeable. unless im /music/movies/games kinda loud.
     im using the latest realtek drivers. ive tried both msi and direct from realtek website. anone have any suggestions???? the whining static gets more annoying with each passing day.

    Excuse me but the latest ALC drivers is found on realtek.com.tw
    and their current release is A3.66 .
    http://www.realtek.com.tw/downloads/dlac97-2.aspx?lineid=5&famid=12&series=8&Software=True
    MSI -ALC650.ZIP is A3.60 (and is just a 1:1 copy of realtek's , checked this with binary comparsion some while ago)
    History:
    A3.66 -
    1. Add some customized settings.
    2. Enable Present ICH DMA hang up function in default.
    3. Fix WarcraftIII game noise issue.
    4. Add a new feature : Don't power taggle PR3 for ALC655 and ALC850.
    5. Support swapping center Left function for nVidia CK804 chipset.
    6. Support WHQL for nVidia CK804 chipset.
    A3.65 -
    1. Add some customized settings.
    2. Fix SPDIF OUT no sound for ALC650 codec after power resume.
    A3.64 -
    1. Add some customized settings.
    2. Update Realtek 3D engine.
    3. Support AC3 SPDIF and 8 channels for nVidia CK804.
    4. Fix EAPD issue after S1 or S3 resume.
    5. Fix getposition not acceurate for ATI chipsets.
    A3.63 -
    1. Add some customized settings.
    2. Fix underrun noise issue by changing threshold value for ATi chipset.
    3. Fix 'Winbench' application issue in 4 channel mode when Sensaura engine is disabled.
    A3.62 -
    1. Add some customized settings.
    2. Fix SPDIF Copy protect issue in Mediaplayer.
    3. Support AC3 SPDIF and 8 channels for Ali1689 chipsets.
    4. Reduce POP noise with EAPD for power change.
    A3.61 -
    1. Add some customized settings.
    A3.60 -
    1. Add some customized settings.
    2. Add workaround code when pause DMA engine for ICH6 / Hance Rapid.
    3. Fix bug for "Force 44K SPDIF" feature when disable direct sound acceleration engine.
    4. Set Surr-out pin as HP-out pin for ALC655 when disable multi-channels function.

  • Ipad sounds static or muffled

    My ipad sounds awful.  The sound comes through like static or really muffled. 

    Try resetting the device by holding the power and home keys down until the Apple logo appears.
    Barry

  • 890FXA-GD70 Hissing sound/static since updating bios/drivers

    890FXA-GD70 BIOS 1.9
    AMD Phenom x2 955 @ 3.2GHz
    OCZ Vertex 3 120GB SSD
    XFX Radeon 6950
    Kingson 2x 2GB KHX1600C9AD3B1
    Cooler Master SilentProM 850W PSU
    Windows 7 Ultimate 64bit
    Alright. So yesterday I updated the bios fro my board from 1.6 to 1.9, as well as all sound drivers. No sooner did I do that did I notice a constant static sound when hearing any audio. I use a Razer Megalodon headset, and have never experienced this problem until I updated. The drivers for the Megalodons are up to date as well. I've tired all USB ports on my system, and still no change. Any assistance would be greatly appreciated.

    Quote from: Thor on 08-July-11, 05:33:50
    Problem solved. Flashing back to 1.6 fixed everything. Thanks gentlemen. Much appreciated!
    I know you're probably never going to even see this topic again but I just want to thank you
    I had the same issue, I bought the Razer Megalodon headset myself, with the same motherboard only problem is my bios was version 1.12.
    I re-rolled it back to 1.6 as they said and thanks to you guys I have got my problem solved as well.. after months of communication with HORRIBLE Customer service of razer.
    I finally got this taken care of! Thank you so much guys! I am really happy haha

  • My speakers sound static when i listen to videos online

    I can listen to my itunes with no static but when advertisement come on on any website or i try to watch or listen to stuff online, a loud static noise comes on and i have no idea why. It all started yesterday night on my macbook pro.

    it is a possibility that you broke something inside the cord try other places where you can use your headphones and see if that works. if it doesnt its most likely broken

  • L455d-s597​6 - Sound - Static

    Experiencing issues with static that comes and goes.  Appeared at same time I began to experience issues with keyboard.  Any suggestions?

    If you created restore discs when you got the computer, you can use them to completely recover your computer to factory defaults. If not, you'll need to order recovery media from Toshiba.
    - Peter

  • AS5920G sound problem ....

    With my sound card, the sound is too low and microphones do not work.
    [ubermensch@arch-tux ~]$ sudo lspci -d 8086:284b -vv
    00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
    Subsystem: Acer Incorporated [ALI] Aspire 5920G
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 22
    Region 0: Memory at f3500000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: [50] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [60] MSI: Mask- 64bit+ Count=1/1 Enable-
    Address: 0000000000000000 Data: 0000
    Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
    DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
    ExtTag- RBE- FLReset-
    DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
    RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
    MaxPayload 128 bytes, MaxReadReq 128 bytes
    DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
    LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
    ClockPM- Surprise- LLActRep- BwNot-
    LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
    ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
    LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
    Capabilities: [100] Virtual Channel <?>
    Capabilities: [130] Root Complex Link <?>
    Kernel driver in use: HDA Intel
    Kernel modules: snd-hda-intel
    [ubermensch@arch-tux ~]$
    [ubermensch@arch-tux ~]$ cat /proc/asound/version
    Advanced Linux Sound Architecture Driver Version 1.0.20.
    [ubermensch@arch-tux ~]$
    [ubermensch@arch-tux ~]$ cat /proc/asound/cards
    0 [Intel ]: HDA-Intel - HDA Intel
    HDA Intel at 0xf3500000 irq 22
    [ubermensch@arch-tux ~]$
    [ubermensch@arch-tux ~]$ cat /proc/asound/version
    Advanced Linux Sound Architecture Driver Version 1.0.20.
    [ubermensch@arch-tux ~]$ cat /proc/asound/cards
    0 [Intel ]: HDA-Intel - HDA Intel
    HDA Intel at 0xf3500000 irq 22
    [ubermensch@arch-tux ~]$ cat /proc/asound/modules
    0 snd_hda_intel
    [ubermensch@arch-tux ~]$ cat /etc/modprobe.d/50-sound.conf
    alias snd-card-0 snd-hda-intel
    alias sound-slot-0 snd-hda-intel
    options snd-hda-intel model=auto probe_mask=1
    [ubermensch@arch-tux ~]$
    [ubermensch@arch-tux ~]$ aplay -L
    default:CARD=Intel
    HDA Intel, ALC1200 Analog
    Default Audio Device
    front:CARD=Intel,DEV=0
    HDA Intel, ALC1200 Analog
    Front speakers
    surround40:CARD=Intel,DEV=0
    HDA Intel, ALC1200 Analog
    4.0 Surround output to Front and Rear speakers
    surround41:CARD=Intel,DEV=0
    HDA Intel, ALC1200 Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
    surround50:CARD=Intel,DEV=0
    HDA Intel, ALC1200 Analog
    5.0 Surround output to Front, Center and Rear speakers
    surround51:CARD=Intel,DEV=0
    HDA Intel, ALC1200 Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
    surround71:CARD=Intel,DEV=0
    HDA Intel, ALC1200 Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
    iec958:CARD=Intel,DEV=0
    HDA Intel, ALC1200 Digital
    IEC958 (S/PDIF) Digital Audio Output
    null
    Discard all samples (playback) or generate zero samples (capture)
    [ubermensch@arch-tux ~]$
    :cool:

    What type of sound problem are you having- low sound, static, no sound at all,etc?
     Get your Product Number by pressing Fn + Esc key or check the Service Tag attached to bottom, may be under battery.Post it.
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • HP ENVY 17t-j000 quad edition speaker crackling/​static

    HP ENVY 17t-j000
    windows 8 home
    hello, I purchased my laptop over the phone from here less than 2 months ago, I have just noticed that my front left speaker "on the bottom front left of the laptop" has a crackling sound/static is this a blown speaker or what could it be? Do I need to have it shipped in and serviced? I have my laptop connected to HDMI 90% of the time, and is used for web browsing / imaging. 

    Hello Offwhite,  I'm sorry to hear that you are having issues with the fan operation on your Envy.  I was able to do some research for you and I found a great document that should shed some light on the issue that you are having.  Please click on the link that I have provided and I think this should help with your concerns.  http://goo.gl/UUzl2Q
    If you have any other questions, please feel free to write back and I will be more than happy to lend a hand.
    Thank you.
    Gbark, Please feel free to use the link as well and if you have any further questions please respond and ill be happy to assist you.
    Thank you
    Waterboy71
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • SB Wow Wireless Sound Quality

    Hello.
    I literally just purchased the World of Warcraft wireless headphones, and when using Ventrilo, everyone tells me I sound static-y/metallic-y. One person said it sounds like im talking with paper in front of my mouth, or like I have cotton mouth. I have turned off all the effects, enabled Wireless Headset tweak in Ventrilo, and updated the software and firmware. This issue still persists. Is there any fix, or any work around to get my voice sounding normal?
    Thanks

    Hi,
    Can you please test the headset with another application besides Ventrilo to see if it is still happening?
    If possible do test the headset on another computer to make sure that it is working fine.
    Customer Support can be contacted via email, please write to them if you need further assistance.

  • The sound on itunes will not play properly can someone plz help me.

    Hi, i am haveing trouble using itunes.
    when i try to play any music files it either wont play or it will sound static, i have no trouble with windows media this works fine. I have gone to the help site and that has been no help to me at all. the other thing i should mention is that i do have an external sound rack.
    Dose any one have any ideas of what i can do.
    Cheers
    D.
    pentium 4   Windows XP  

    site - http://www.ecs.com.tw/
    board - Elite (ecs) - K7VTA3
    and the options are
    Motherboard Series
    BIOS
    Drivers
    User's Manual
    Aio Series
    BIOS
    Drivers
    User's Manual
    Book PC II Series
    BIOS
    Drivers
    DeskNote Series
    BIOS
    Drivers
    User's Manual
    VGA Card
    BIOS
    Drivers

  • New ITUNES won't install

    i recently tried to upgrade my itunes to the latest one. everytime i tried to install it there would be a message saying that it is from an unknown publisher and then another one would come up saying not a valid win32 application. any answers?

    I think i've fixed all my problems.
    Here's what i did. After a many hours (thanks Apple!) of reinstalling and system restores I finally gave up. 1 day later Windows releases a huge windows update with like 4 patches. I ran and installed that update. I tried to listen to a Quicktime audio stream but like I mentioned before, it wouldn't work unless I installed the lastest Quicktime. So I was directed to the Apple site to download quicktime (again...) I chose to download it without iTunes. It worked! I started to think...well if it worked, maybe upgrading to itunes 7 will work now. So I took the chance to download the new itunes 7 upgrade after painfully getting itunes6 up again (which didn't end up working...no sound would play) and VOILA! iTunes 7 worked because it recognized that my QUicktime was uptodate this time. I think it had something to do with the windows update that wasn't available the day all this mess happened! ANyways, only experiencing the odd song that will sound static and distorted on the new iTUnes7, but if I stop the file from playing and restart it, sounds fine. I really like the free Album Art.

Maybe you are looking for

  • UEFI & syslinux - system will not boot without keyboard plugged in

    Somewhat of a weird one. I have successfully gotten a UEFI Arch system booting, using the https://wiki.archlinux.org/index.php/Sy … FI_Systems and https://wiki.archlinux.org/index.php/Un … _Interface wiki articles. Speficially, I used "efibootmgr" to

  • Need Authorization Oject for a LE report

    I have a Z report which is launched by a Ztcode and fetches all the information of packed items delivered by a vendor at a particular plant... providing supplier packinginformation(handling units) to upload to a local label system to print label for

  • Help required on Keychain Access !!?

    The Keychain Access window keeps 'popping up' to ask me to put in my pass word I can, iether put it in ( and it won't pop up for a while) or I can just click on cancel and it will let me carry on !! Any ideas ? I have tried Keychain First Aid and thi

  • Issue while performing pivot in Essbase Excel Add in

    Hi, I'm faced with a peculiar issue by which I'm unable to pivot data from excel add-in. I've verified that the Formula Preservation is disabled. Yet, i get the error 'Cannot pivot while in Formula Preservation Mode'. I've tried reinstalling many tim

  • Webservice Report without graphics

    Hi All, i am looking for a solution of a hopefully easy Problem. I am generating Reports with web services and the format is HTML. All is working fine but the created charts only are referenced with the image name and not with the url to the location