Sound status continues displaying.

hai,
i have getting problem in continueslly the sound bar display not working properly.

Hi lipun,
If I understand correctly the sound bar stays displayed all the time instead of disappearing is that correct? We will look at reinstalling the audio drivers but I will need both your operating system and your product number, please.
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Similar Messages

Sound status not showing.

With the new update (ios 7.1) it has come to my attention the now no longer the sound status bar is no longer displayed when altering the sound level via the buttons.
Snthis a problem with the update or my device?

I use a wireless KB. When I change the sound level, the status thing appears in the middle of the screen.
You might try resetting the device (hold the power and home keys down until the Apple logo appears).
Barry

How can I get dock connector to turn off on air play. There is no longer a choice for sound to be displayed on iPad. I do not own outside speakers. Have already reset. Thanks

How can I get dock connector to turn off on air play. There is no longer a choice for sound to be displayed on iPad. I do not own outside speakers. Have already reset. Thanks

Slow, intermittent. Sometimes bootable sometime not. Odd behavior.
Sounds to me like a classic case of your HD failing.
Your SMART status may still show verified, with no errors on the Apple Hardware Test, Disk Utility shows no problems on Disk Repair- this is of no help.
I trust you have a good back-up and a bootable clone.
http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/

Acrobat xi - RE: Add sound icon- skin displayed is a 'blank white box' until it is clicked to activate it- can you lock skin to display before its activated so that in a print run the skin shows up (ie the controls-or any kind of greyed out rectangle, lik

Hi,
Acrobat xi - RE: Add sound icon- skin displayed is a 'blank white box' until it is clicked to activate it- can you lock skin to display before its activated so that in a print run the skin shows up (ie the controls-or any kind of greyed out rectangle, like video controls before 1st activation) and not the blank white box- if no, I guess I have to activate all sound icons before doing a print run?thanks)).

Many of your points are totally legitimate.
This one, however, is not:
…To put it another way, the design of the site seems to be geared much more towards its regular users than those the site is supposedly trying to "help"…
The design and management of the forums for more than five years have driven literally dozens of the most valuable contributors and "regulars" away from the forums—permanently.
The only conclusion a prudent, reasonable person can draw from this state of affairs is that Adobe consciously and deliberately want to kill these forums by attrition—without a the PR hit they would otherwise take if they suddenly just shut them down.

Status Bar displays "Access is denied"

Hi,
We have EP 7 SP 11 portal where we are displaying Web Dynpro Java Iviews.
Whenever a user logs in into the portal, the status bar displays a message" Access is denied" . Though this does not affect the funcitonality of the system but customers are complaining about the same.
It would be really appreciated if anyone can help us on the following :
1) What is the reason for this message appearing on the status bar ?
2) Can this message be completely removed from the status bar ?
3) If the text can be changed for this message displayed on status bar ?
Thanks & Regards,
Bir

Check for the error message appearing in Netweaver Administrator Logs
http://host:port/NWA
goto monitoring and selects logs
Check in Default Logs after you encounter error
Definitely the user is missing some permissions . Also check in the ABAp Dumps at ABAP end for missing authorizations on ABAP side.

I was listening to music on my ipod shuffle when it went off.It hasn't turned on since then.When i connect it to the computer,the connection and disconection sounds play continuously without the ipod showing.What could be wrong or how can i get it to work

I was listening to music on my ipod shuffle when it went off.It hasn't turned on since then.When i connect it to the computer,the connection and disconection sounds play continuously without the ipod showing.What could be wrong or how can i get it to work?

Hello,
I am currently an owner of an Ipod Touch 4th generation. I see you are having problems with your Ipod Touch, so I will try to find a solution to your problem.
Hold down the Sleep/Wake and Home buttons for at least 10sec. or until Apple logo appears (Nothing will be lost, this is just a "Hard Reset")
Hope that helps!
If none of the above solutions work, can you please respond back ASAP as I will try to find another solution to your problem (This might even help others with the same problem!)
Cheers!
Pizza98704

22CV1000 Toshiba LCD TV/DVD combo: Sound but no display

I am having problems with my 22CV1000 Toshiba LCD TV/DVD combo!
When I turn the tv on, it sounds like it is trying to read a DVD. The display appears for second, but then goes black. I still have sound, just no display.
The Toshiba help line told me to unplug and replug the tv - but that did not help.
I would really appreciate your advice!

At this point, I think you should call support back. It sounds like it might need a repair.
- Peter
- Peter

Display Connector: Status: No Display Connected

Display Connector:
Status: No Display Connected

From System Profiler, please post the "Machine Model" information from its Hardware Overview page. There are quite a few MBP variants today and knowing the exact variant helps others help you.
Example: the Machine Model" info for my Late 2007 MBP 15" is "MacBookPro3,1" and this very accurately identifies the computer for troubleshooting purposes.
If the machine model reports a number higher than "4,1" you have a newer MBP that's covered in this forum section:
http://discussions.apple.com/category.jspa?categoryID=251

When I pause the sound still continues

When I pause the sound still continues. When will I test the movie in the timeline and use the timeline buttons not break the sound along with the image , it continues until it stops , the problem is that I have very long sounds and he plays to the end.

I'm guessing that the sound is embedded in the timeline. If this is the case, then select the keyframe where the sound starts and then, in the Properties window, set the Sync property for the selected sound to "Stream".

Sound status

Hi guys,
I am trying to set up a very simple sound status if statement
but I am getting this error message and I have no idea why -
"Handler not found in object: #status"
As you enter the frame a sound plays on channel one. There is
a stop and pause button which work fine by simply telling channel 1
to stop or pause. However on the play button I have the following
code:
on mouseUp
if sound(1).status() = 4 then
sound(1).play()
else
sound(1).play(member("Cap-More-Sound"))
end if
end
This simply states that if the channel 1 is paused, then play
or if anything else, play "Cap-More-Sound" and I don't know why I
am getting the error message. Any idea?
Thanks very much!

You do not need parenthesis after status:
WRONG:
if sound(1).status() = 4 then
CORRECT:
if sound(1).status = 4 then

In T-Code IE03 Equipment status is displaying this status isin which table

Hi,
In T-Code IE03 Equipment status is displaying, this status is in which table we can find. ( I mean this status is in which tables storing).
My requirement is Equipment related report is there, this report is displaying now all equipments irrespective of status, enhancement for that report is which equipment status is having Deletiong flag 'DLFL' it should not display in report output.
I have to check the status to incorporate the logic for that, I need the tables where it is storing. In EQUI and EQUZ tables deletion flag field is there but this field is not set which equipment is having deletion flag in IE03 displaying status 'DLFL'.
Please let me know where I can get the status.
Regards,
Ganesh

Hello
1. Goto table EQUI with equipment number. Get OBJNR.
2. Goto table JEST with OBJNR. Get JEST-STAT (may be any records)
3. Goto table TJ02T with ISTAT = JEST-STAT.
You will have all status for particular equipment number.

Db12 archiving directory status is displayed "unkown"

hi,
db12 archiving directory status is displayed "unkown"
but some systems display well.
what do I check?
thanks

Hi Lee,
You can try by refreshing the db12 screen, by press F8. Also please check the directory permission, your "SIDadm" should be able to ready the filesystem, probably you have have to give dba group access to "SIDadm".
hope this helps.
Regards
Prashanth

Startup sound heard continuously

Hi All
I have a Macbook Pro A1226 .
When I push the power key , the Startup sound heard continuously , but ther is no picture on the screen . help me to solve this problem.

I am having the same issue.
When I try to start my Macbook Pro, I get an endless loop (well at least 5 minutes before I give up and power it down) of the start up chime. It just keeps repeating over and over. THe screen stays black and never lights up. THe chime varies a slight bit, occasionally sounding like it cuts out half way before it finishes, but then a full chime will happen again.
I have tried the PRAM zap, Systems Management Controller reset (disconnect power and battery, hold down power button for 5 sec, reconnect to power and try again, as well as the Cmd-Option-Power hold down that is recommended for the newer Macbook Pros), tried safe start up (holding shift) even tried to boot in Target disk mode just to see if I could get info from the hard drive.
I have tried reseating the ram.
I have tried it with only battery (which does seem to be charging fine), with only ac power, with both.
Not sure if it anything but When it is plugged in and the battery is fully charged, the green light goes out on the charger and no light comes on.
Any help is greatly appreciated.

Sound Bar screen display

The sound bar screen display which shows the sound volume level when the up and down sound buttons are pressed has disappeared from my screen and I can't figure out how to get it back. Has anyone else experienced this problem? I think it may have started after a system or windows update.
Appreciate the help.
Kevin D.

Hi Kevin,
http://support.microsoft.com/kb/319095
Does above help?
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

The dispaly of sound icone continuously show as closed ( Mute- purple ) whereas the sound is open .

The dispaly of sound icone continuously show as closed ( Mute- purple ) whereas the sound is open . Please advise how to make it work properly - Have tried reinstalling audio driver IDT also with no success.

Hi,
It's always worth trying a Hard Reset as follows.
Shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for a full minute. Re-insert the battery, plug in the AC Adapter and start the notebook. Will the mute button change colour now?
If the above doesn't help, post back with the following.
1. The full Model No. and Product No. of the notebook ( from the service tag underneath your notebook ) - see Here for a further explanation.
2. The full version of the operating system you are using ( ie Windows 7 32bit ).
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Sound status continues displaying.

Similar Messages

Maybe you are looking for