Sound stop and start on DVD

Hi
I make a diaporama on iDVD with music. When I watch it on iDVD, everything is perfect. After burning it, I tried to watch it on my home DVD player. Everything was fine except, at some points, the music stop 2 seconds and start again. It's like we paused the music for two seconds. It makes it few times on the DVD.
What could be the problem??

Q: To export as a Quicktime video from iPhoto, do I need to buy Quicktime pro?
A: No you do not need to buy QT Pro in order to Export from iPhoto as a QT file or movie.
Have you tried this?
Click Here:

Similar Messages

  • Apple TV problem- Netflix message not availabale at present etc.  On Itunes playing a movie the sound stops and starts how can the downloading hurry up.  On the computer all OK.

    Netflix keeps posting not available- have restarted it as directed but still a problem.  Itunes movies dont download fast enough and stop and start. On the Imac computer no problem with sound or viewing.

    What is your current connection using speedtest.net
    I would check for interference using istumbler
    Make sure DNS is set correctly on ATV (settings - general - network - configure DNS - automatic)

  • Sound stops and starts with x-fi titanium pci e

    I am going nuts with this problem and creative support is not much help atm, so I have been troubleshooting myself. Whats going on is my sound stops, starts, and stutters a lot. It is pretty bad when I play music files but it is absolutely horrible when I watch videos like on CNN or YOU TUBE. It is like a old vinyl record skipping, except when this gets off a stutter, it races to where it should be on the time line. Also my creative console does not work right. I cannot use the equalizer, as the custom, rock, pop music select is greyed out and the box is checked to use the equlaizer. It also disappears when I click on a few tabs, like between speakers, bass, equalizer..then its just gone and I have to click the shortcut again to get it back.
    What I have done so far is un-install everything, and do a clean boot, then re-install and I have the same problems. Though I downloaded the creative console beta(2.6.49) and it seemed to have fixed my issues with that. But downloading the new drivers (2.7.8) does not fix the stopping and starting.
    Any suggestions?
    I should mention I use klipsitch speakers..2.1, I don't have surround sound anymore.
    Customer service had me run a registry cleaner and use it to uninstall everything creative. I used CCleaner, then used direct links to download drivers...again...(2.7.8) and a creative console(2.6.35)..guess what? It didn't work, same problems, though I downloaded and re-installed the beta for the creative console(2.6.49) and now it works fine. I also did all this under a clean boot..again.

    Check if "Play Stereo Mix using Digital Output" is checked in the Console launcher in Settings/Digital IO.

  • Movies sound stopping and starting

    Sony xperia z1Sony carried out a large software update about a week ago,after that none of my movies work properly now, this is what happens.about every 30 seconds the sound stops for approximately 5 seconds, when the sound starts again the movie pauses for approximately 2 seconds, then it happens all again 30 seconds later,this is on all my movies iv deleted movies,reinstalled,deleted cache, and now connected to sony companion and done a fresh install to factory settings, still the same,I need my movies for flying abroad has I'm on holiday in a week,please resolve...... Thanks

    Are these your own movies or movies from PS Video as it's now called and do you have PS Video installed
    For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled.   Richard P. Feynman

  • T530 sound stops and starts

    The sound on my T530 will stop working and then if I leave it alone for a while it will start back. It seems to happen after I've used my headphones but I'm not sure. Any ideas?

    Hi Hbyrd,
    Welcome to Lenovo Community!
    Have you checked with updating drivers from Lenovo support site?
    Have you checked with different ‘Headphone’, is the same ‘Headphone’ working fine with other system?
    Hope this helps.
    Best regards,
    Hemanth Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Apple tv sound stops and starts

    ?my apple TV keeps cutting in and out after 15 or 20 seconds it cuts out audio for 1 or 2 seconds and keeps doing this.
    Can you help.
    roy52

    Hi roy52,
    I found the following information which may assist you in troubleshooting this issue:
    Apple TV: Basic troubleshooting
    http://support.apple.com/kb/HT1551
    If you can see video but can't hear sound
    If Apple TV is connected to a receiver, make sure the receiver is turned on.
    Make sure the input setting you've selected on your receiver matches the input you have your audio cables connected to. See the documentation that came with your receiver for more information.
    Make sure the volume on your TV or receiver is turned up and isn't muted.
    Check whether you can hear sound while playing video only. Also, check whether you can hear audio feedback while clicking through menu options.
    If you're connected to the HDMI port on your TV and Apple TV, make sure your TV supports audio through its HDMI port. The HDMI ports on some older TVs support only video.
    If you are using HDMI audio, try disconnecting and reconnecting the HDMI cable.
    If you're connected to the HDMI port on your TV and Apple TV, make sure your TV is setup to receive audio from HDMI. For some TV's this is automatic, but for others there is a choice between digital and analog (for HDMI audio, choose digital). Read more about HDMI audio.
    Try the other audio outputs on Apple TV to see if they work.
    If possible, try using different audio cables.
    Cheers!
    Matt M.

  • DVD will not stop and start in a Menue Mode

    Hello I am using DVD Studio Pro 4 for a school project and i am looking for some help with this problem.
    The DVD i have created plays and stops when i am watching one of my video tracks, i just can not start the DVD when i am previewing in any menue after i stop it.
    I have created my DVD with 16 menus and 2 video tracks. It burns and plays back fine but i can not stop and start the DVD when i am in a menu mode. The DVD will stop and play when i stop the DVD playing video from one of my video tracks but when i am in menu i push stop on my DVD controller and the DVD will not start back up. The DVD will look like it wants to play but it will not play. I have to open the DVD player tray open in order for it to start the DVD again.
    The DVD is a NTSC, SD, single layered 2.9GB
    Any help would be much appreciated, Thanks.
    Mike
    PowerBook G4 15 1.25 ghz   Mac OS X (10.3.9)  

    If only five months old it is still under warranty. Take it back.

  • Burned DVD issues in DVD player not reading or music issues stop and start

    I'm a PC converted to a MAC (less than a month) and love it so far. I have been able to create and burn a DVD. The problem I'm having is one DVD player will not read the DVD (Hitachi). The other DVD player will play it, but the music stops and starts when it transitions (twirl) to another picture (Panasonic DVD/VHS combo). I'm using a DVD R Memorex. Neither one of the player are new. Would love to use this to make the Grandparent's a DVD of the grandchildren from birth to present as Christmas present. What do I need to use or do to be able to watch on any DVD player as well as the computers?
    Message was edited by: me01

    Hi me01
    Welcome to apple discussions. Try using 99 photos / less to avoid issues with audio fades / drops. Also do a search for Memorex on this forum and you'll see it's not the first choice of dvd's for most users. Instead try Verbatim, Maxell, or Taiyo Yuden and burn at 4x from a disc image for best results. Wish you luck and feel free to post back with results or any further questions.
    Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software / products that may be mentioned in this topic. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information above at your own discretion.
    Message was edited by: SDMacuser

  • My lap top is extremly slow. It studders. It kind of sounds like there is a fan inside and it constantly stopping and starting. And, it takes a really long time for it too start up. Whats wrong with it?

    My lap top is extremly slow. It studders. It kind of sounds like there is a fan inside and it constantly stopping and starting. And, it takes a really long time for it too start up. Whats wrong with it?

    Do you have current backups?
    Those symptoms could indicate a failing Hard drive. If it dies, all your documents go with it unless you have Backups.
    I have had very good luck with physical and battery problem diagnosis at the Genius Bar. Those guys put their hands (and their ears) to these machines, all day every day, and they know immediately what all those sounds mean.
    Your appointment for an evaluation is FREE, in warranty or out.

  • Sound randomly stops and starts

    Hello,
    Over 2 days, as I watch Netflix, or listen to music on other apps, my sound randomly stops and starts.  I have no control of it.  I do not have to touch my ipod when this happens, it does this on its own.  On for 20 min, off for 5 min, on for 5, off for 2, on for 1 min, off for 15 min.  It ossolates randomly through time.
    I hard reboot, but this works or does not work (for a while).  Any ideas?

    Hello,
    Over 2 days, as I watch Netflix, or listen to music on other apps, my sound randomly stops and starts.  I have no control of it.  I do not have to touch my ipod when this happens, it does this on its own.  On for 20 min, off for 5 min, on for 5, off for 2, on for 1 min, off for 15 min.  It ossolates randomly through time.
    I hard reboot, but this works or does not work (for a while).  Any ideas?

  • How to stop and start MDBs to listen for JMS messages

    Hello! This might be more of an architecture question rather than a technical questing, but I post it here, in the lack of a better place...
    For several years I have been using Webster and Webster MQ to send messages back and forth to clients. The architecture for the middleware platform has been designed around the functionality of ListenerPorts. Listenerports is a Webster functionality that let you "stop" and start to listen to JMS messages for a given MDB either by admin console, or by JMX.
    The arhitecture we used was something like this :
    1.Client sends a persistent message to a queue. (order)
    2. An MDB pics up the order message, calls a SessionBean that "fronts" the IIOP back end system.
    This is quite "out of the box" architecture, but we used the Listenerports to solve a stability problem for our back end system.
    The backEnd system was quite unstable, so the EJB threw an exception (typically because of timeout or connection refused) back to the MDB.
    The Listenerport was "defined" to handle 3 errors before stopping, so the MDB resent the message twice before the listenerport automatically stopped. The nice thing about this feature was that the client could continue to send orders, and was not bothered when the back end system was down.
    When the backEnd system was up and running, we could start the listenerport and it was all back to normal state. We even had a start script that checked the state of the listenerport every 30 minute, and started it automatically if it was stopped, making the admin task of starting the MDB unnecessary..
    Now.. Why am I telling this story..
    I would like to know how this could be done using "clean" J2EE technologies..That is..Not using any technology that is not portable..
    I`m playing with glassfish at home, and it struck me that there is nothing in the J2EE spec that defines the functionality described above ? Am i missing something ?
    I Do not want to stop My application because the back end system is down? That is the only way (i know of) that i can "stop" to listen for messages..
    I can put all the messages on an error queue when the backbend system is down, but that would lead to more code just to handle the error messages. Maybe the easiest way to solve this is to "move" (programmatically) all messages from the error queue over to the "standard" queue every XX minute, but somehow that sounds "wrong"
    Can anyone give me some advice to how this problem situation should be solved ? I`m interested in the solution both from an architectural perspective and from a more technical perspective..
    Best regards
    Hans-Jacob Melby

    Breakpoints, whether normal or conditional, are just meant for debugging of your code.  I had the sense from your question that the pausing you want to do is a part of normal operation of your code.  I would NOT recommend using a breakpoint for that situation.  It would bring up the block diagram showing the breakpoint when it occurs.  A user besides the programmer would not know what to do in that case.
     Yes, both the inner and outer loops would have shift registers.
    Putting a case structure with a small while loop inside the "Pausing Case" is doable.  It just depends on what you are doing or waiting for while the program operation is "paused".

  • Why does the video stop and start using airplay on Mountain Lion?

    Why does the picture stop and start using airplay on Mountain Lion? I'm playing a film from a website and uising airplay to iTV. The sound is fine, but the picture stops and starts. Any ideas?

    Why does the picture stop and start using airplay on Mountain Lion? I'm playing a film from a website and uising airplay to iTV. The sound is fine, but the picture stops and starts. Any ideas?

  • How do I get u-tube videos to run smoothly.  They stop and start and jump.

    How do I get u-tube videos to run smoothly.  They stop and start and jump.

    Sounds like they are buffering because your internet speed is way to slow.
    To check your internet speed, go to: > Speakeasy Speed Test
    or > Speedtest.net - The Global Broadband Speed Test
    Plus you can also check your internet speed using the Activity Monitor, which is in your Utilities Folder.

  • My audio stops outputting after a few songs in a playlist - itunes says its still playing, stopping and starting track recommences audio output.  Mac book Pro Lion 16gb ram

    My audio stops outputting after a few songs in a playlist - itunes says its still playing, stopping and starting track recommences audio output.  Mac book Pro Lion 16gb ram.  Can be any song, any time, same song will play if I select it again.  Bit of a bummer itunes is the main thing I use (macbook pro jukebox).

    Most likely culprit is your Lacie drives which are notorious for flaky power supplies which cause just the sort of erratic behaviour that you describe. Have had similar issues myself. Lacie has been good about replacing my power converter-- twice. If you have seven of them, good luck finding the bad one or more. Like I said, the behaviour is erratic. Sometimes it'll work sometimes not. I can't comment on Samsung drives because I've never used them and have never heard anything about them. Same with Softraid. Why not just use Disk Utility. Sounds like you're ready for an external hardware raid. This will be much faster, much more reliable, and may even be cheaper than seven firewire drives. Check out G Tech, and Maxx Digital for starters.
    Best of luck
    Terry

  • Music stopping and starting

    I listen to music via Match daily.  Beginning last month I've been experiencing music stopping and starting, big gaps between tracks, and clunky behavior in general.  It's comes and goes but over the last week it's been terrible.  Is anyone experiencing this?  I have tried re-initializing match on my iPhone but it doesn't seem to work.

    salam alykum
    kindly goto settings---Music--- Shake to Shuffle = OFF
    Sound Check = OFF

Maybe you are looking for

  • Not able to clear the GR/IR account due to missing link of purchasing doc

    HI, We have the below process:- (1) Do MIR7 to post the consignment withdrawal - It post the document in GR/IR account material document wise (2) Do MRKO for the settlement - It post the document in GR/IR plant wise, as we have the summerization acti

  • Solution manager maintenance optimizer

    Hi all, I have what I think is an issue, and hoping someone could possibly point me in the direction to correct. I have setup our solution manager system and trying to get the maintenance optimizer option working fully. I have a java system that I pu

  • IPad 2 HDMI Adapter - Max Cable Distance

    I work as a A/V Specialist at a local university. Currently we are running the majority of new projectors with HDMI. Since the iPad 2 has come out with its mirroring feature via the HDMI adapter, professors want to be able to plug their iPads into ou

  • How to delete attachment to reduce size of message

    I recently moved over from Eudora to Mail.app In Eudora, all attachments were put in an attachments folder, so the size of the actual message in the mailbox was small. In Mail.app, it seems that the attachments stay as part of the message, even if I

  • Flash 8 Button Bug

    I've run into what appears to be a bug in Flash 8. I'm using Flash 8 Professional. I have an FLA containing buttons. Each button contains two layers. The first layer is text. The second layer is a line that acts as an "underline" for the text. When I