Sound stops during games

Randomly my sounds stops during most of my games. Clash of clans my sound will fade in and out like its trying to work properly, but other apps are just muted completely. If im listening to music while playing a game, it seems to happen more often. ALL sound is stopped, i have to exit my app to turn the music back on. This happened after i synced some music. It was TERRIBLE, but i managed to sync it 3 or 4 more times to try and correct the problem, it helped but didnt fix it. One day my sound wouldnt even adjust. Something is seriously wrong with this OS. This has been a problem since iOS7. And i was syncing my wifes new Justin Timberlake, apparently the iPod hates him as much as i do.

NoSound problem with headphones? With speaker?
If only with headphones have you tried another pair of headphones?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Similar Messages

Sound stops during automation recording.

Alright here's a video example of what I'm talking about.
When I'm doing a "Touch" Automation on one midi track, while recording a touch track the midi sound stops as soon as I move the slider.
The automation still records, it's just that the sound stops during automation.
In the video notice that as soon as i move the Volume Automation slider the midi playing
stops. Why? I need to be able to monitor this while I'm adjusting the automation.
Appreciate anyone's suggestions.
It's Logic Express 8.0.2 by the way.
http://s177.photobucket.com/albums/w238/perrycomo/?action=view&current=Example1. mp4

NoSound problem with headphones? With speaker?
If only with headphones have you tried another pair of headphones?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Sound stops during playback

Running the latest version of CS6 (current on all updates) on a Mac Mini i7 2.3GHz with 16GB RAM running OS X 10.8.2.
Whenever CPU usage starts to get a little heavy, sound will go silent at random times during playback of timeline in the program monitor. Meters go to zero when sound goes out and go active when sound returns. Video playback is fine and there are no dropped frames. This also was happening on my previous machine, a 2008 Mac Pro. Started happening with CS6 and never happened in CS5.5.
All my source footage is h264 from a Canon 5D. Sequence was created by doing the 'create sequence from clip' command. Program monitor resolution is set at 1/4. Played with setting audio hardware buffersizes to different values but with no change in behavior.

I'm having the same problem on an editing workstation with CS6. The audio will stop playing after 4-5 seconds, video plays fine. The timeline has been rendered. If I hit the stop/pause key, (spacebar), and hit it again, it will play for another 4-5 seconds before the audio drops out. Sometimes only one audio track will stop playing.
Video is 720P, two audio tracks, three video tracks. System is win 7-64 with an intel I7 extreme CPU, 12 GB RAM (9GB dedicated to Premiere, performance mode)
Any suggestions?

Sound stops during movie, restart to fix

i've searched around and the closest reference was : http://discussions.apple.com/thread.jspa?messageID=844795&#844795
However, I haven't seen a fix yet so I will ask the question myself.
When watching some movies (2hrs+ in length) my 5g ipod will suddenly freeze a couple minutes in and then resume without any sound. I have to exit the movie and restart it. The movie then resumes from where I left off and the sound is fine for a few more minutes.
This does not happen on all movies. Any idea?

If you've updated recently to the latest software (1.1), and you've used Videora to rip your DVDs, then that's the problem. It's well documented on this forum, and even the Videora home page has a note about it.
The only solution to this is to revert to software version 1.0 which should be on the installation disk.

Sound stops during song

Hi
The sound keeps cutting off half way through songs or at anytime and sometimes only one side of the speaker will work and sometimes its just fuzzy.
I have tries running songs through media player etc and it works fine. There is nothing wrong with my speakers.
What do I do? It really annoying... HELP

NoSound problem with headphones? With speaker?
If only with headphones have you tried another pair of headphones?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Sound stop playing during video playing on ipad 1 with ios 5.1.1

after updating my ipad 1 to ios 5.11 the sound on my ipad sometimes stops suddenly. it happens during video playback, music listening or just text typing on keyboard.
i ve tried all the advices seen on communities and no one worked for me (restore the system, change the lock screen button configuration, clean the headphone input, test with apple headphones...)
please help me to find a solution and thank you for your help.
another information : when sound stop playing, sometimes when i lock the ipad, a strange noise comes from the speakers like a larsen.

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
 Cheers, Tom

During face time the sound stop ??

when using face time after one minute the sound stops ??? need help

Hello there CGM77,
It sounds like you are not being heard by anyone you are FaceTiming, but you can hear them without issue. Thats an odd issue, since you've already verified the volume and mute settings. I would next quit all the running apps on your iPad:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that and restart the phone and test the issue again:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If it persists, try these troubleshooting steps from the following article. The title mentions the iPhone, but the steps are also relevant for the iPad:
Follow these steps, testing after each.
Make sure nothing is plugged in to the jack connector.
Make sure nothing is blocking any of the microphones.
Check for these:
Dirt or debris
A screen protector or case
When you're holding your phone next to your ear, make sure you don't block the microphone with your fingers or shoulder and make sure to speak into the microphone
Turn the iPhone off and then on.
Update to the latest version of iOS.
For further assistance, contact Apple Support.
If the issue persists and you need to make a call, try using headphones with an integrated microphone.
iPhone: Microphone issues
http://support.apple.com/kb/ts5183
Thank you for using Apple Support Communities.
Regards,
Sterling

AUDIGY 2 ZS: Sound stops working when loading ga

Hello, I recently upgraded my CPU/mobo and reformatted. Ever since then I've been having a few problems with my sound. I'm using the Audigy 2 ZS. I have the latest drivers off the website. Yes, I have disabled the onboard audio in the BIOS and there are no drivers for it installed in Windows. And yes, I have the latest version of DirectX and SP2 and everything else from Windows Update.
- I'll play Mp3's in Winamp - using both the DirectSound and waveOut output methods - and the music will play fine. Windows system sounds and AIM sounds play find with this too. When I launch any game however, the sound shuts off.
For example, I'll load World of Warcraft, and the music will stop playing, when I exit the game the music resumes. Even stranger I noticed that when I WoW is running, the speaker configuration randomly gets changed from headphones to stereo speakers. Changing it back via Creative Audio Console caused the audio console to hang. Trying to change speaker configuration via Windows did nothing. and yes, I checked to ensure my soundcard was selected as the proper playback device, the volume was up, not muted, etc...
When I run Neverwinter Nights 2, the sound will shut off for the into logo screens and the intro scene. My Mp3 music from Winamp WILL resume playing at the main menu, however, the volume becomes noticeably less. Exitting the game restores the proper volume level.
Even stranger - if I run NW2 followed by Warcraft, my music will play during WoW, but at a lowered volume similar to Neverwinter nights 2. If I then quit WoW and restart WoW, I am back to no music. Strangely it seems just to get the low-volume music to play during WoW, I have to have previously run Neverwinter Nights 2.
To summarize:
- Music and Windows sounds stop altogether while running World of Warcraft
- Music and Windows sounds play at much lesser volume during neveriwnter nights 2, and not at all during intro
- sound works in warcraft, but at a lower volume, ONLY if I'd run neverwinter just before runnign warcraft
- similar buggy low volume / no music at all problems in Medieval 2 Total War
- one time I had my music become all distored and start skipping/ slowing down when I was trying to reset the speaker configuration back to Headphones when it was magically changed to stereo speakers.
I highly doubt it's a problem with the games - I've been playing these games and using Winamp and my Audigy 2 ZS for quite a while now, and never had a problem with any of my games screwing around with my WIndows sound levels or cutting it off altogether. I'll keep updating as I install more softwareMessage Edited by xagent on 0-09-20070:9 AM

Could it have anything to do with the fact that the drivers I downlaoded were off the Creative website?
I'm currently on WInter break for a couple more weeks, and left my Audigy 2 ZS CDs back at college. But I don't see why the latest Audigy 2 drivers from the Creative website should be faulty.
oh, and I'm running Win XP Pro

MSI Neo2 K8N Platinum - Freezing Issue during games

First off greetings to everyone on these forums...
I purchased the MSI Neo2 K8N Platinum motherboard from NewEgg back at the end of March to compliment the AMD 64 "Winchester" processor that I also purchased at that time to replace a slightly older AMD XP "Barton" system that was using the Abit NF7-S motherboard. For the past month I have been fighting an unusual and highly irritating issue that I have noticed during game play and have tried everything that I know of and more in an attempt to remedy this issue, but to no avail. This is the general background of the situation and now I will descibe in greater detail as to what this issue I am referring to is and the symptoms of this issue and some of the various methods used to remedy this issue.
The issue is that while play a game the system experiences a short 5-10 second freeze during the game randomly, but usually several times an hour. During this freezing the sound would loop and as suddenly as the freeze occurs it would cease and the game would continue on as if nothing happened. However, sometimes this would result in the system freezing outright after this short 5-10 second freeze... but it does not feel like a total system freeze, but rather a video freeze as the sound continues and I still have keyboard control... but this does require me to force a manual reboot of the machine itself. I have scowered the internet and various forums in an attempt to find what the issue was and use various methods to remedy this issue, but so far nothing has worked in my favor... but it does seem like this issue has been plaguing other users with the MSI Neo2 Platinum motherboard. Below are some of the methods that I have used in an attempt to solve this issue:
*Default Clock for CPU/Memory/GPU; Over/Under Clock for CPU/Memory/GPU
*Increased voltages to CPU VID, AGP, and Memory
*Disabled/Enabled AGP Fast Writes
*Increased AGP Aperture from 64MB to 512MB
*Enabled/Disabled ATI/nVidia Speedup option in BIOS
*Forced AGP clock lock to 66-67mhz
*Relaxed/Aggressive memory timings
*APIC enabled/disabled
*Gate A20 turbo/normal
*Disabled all unneeded onboard components (Realtek NIC, Sound, SATA)
*Disabled nVidia MAC and attempted to use 3Com Gigabit PCI card instead
*Swapped HDD Cables
*Tried PCI Sound Card (SB Audigy2 ZS Gamer) in PCI Slots 3/4
*Tried video drivers from 71.89 Official to 76.45 beta modified drivers
*Tried 5.10 official nForce drivers to remixed 7.02 nForce drivers (5.10 drivers uses 4.36 GART, higher drivers uses the 4.40 GART)
*Applied all the latest updates from Windows Update Website
*Reinstalled Operating System (Windows XP SP2) 5 different times clean with various settings (APIC on/off, etc...) and different drivers.
*Installed Audio Card (SB Audigy2 ZS Gamer) with older and the latest drivers available from Creative's website
*Replaced PSU (Previously was a Thermaltake 420watt PSU, 18A +12v) with a OCZ Modstream 520watt PSU (28A +12v)
*Video card is KNOWN working from previous build (AMD XP 3000, Abit NF7-S)
*Hard Drive is KNOWN working from previous build
*CD/DVD-ROM drive is kNOWN working from previous build
*Heat is not an issue... all components temperature is well below rated level, the only unknown is the chipset temperature (it has a active heatsink and seems to not be hot to the touch, applied AS5 to it anyway)
*Used latency tweak to the video card
*Used Rivatuner to force constant performance level
*Tweaked BIOS to force even clock rates and forced 1.4v to the GPU Core
*Used original GPU BIOS
*Used MSI Neo2 K8N Bios 1.4 - 1.8 and modified BIOS 1.8
*No background applications are running (not even antivirus)
*Used application to force maximum refresh rates for my monitor
*Memory passed MemTest86+ for over 24 hours
*System passed Prime95 and SuperPi for over 24 hours
*System seems stable in all non gaming related applications
*Checked through various troubleshooting procedures
*Disabled SBDRVDET.EXE using MSCONFIG
*There are no IRQ conflicts outside of PCI system management sharing IRQ11 with the NIC and USB... in APIC there are no IRQ conflicts what so ever. Regardless neither method worked
*Installed AMD 64 drivers from AMD
*Disabled DEP in boot.ini
*...and many other various tweaks and modifications.
System Specifications
CPU - AMD 64 3200+ "Winchester", using Thermaltake Silentboost K8 and AS5
Motherboard - MSI Neo2 K8N Platinum (nForce3 250GB Ultra) - Using Bios version 1.8
Memory - 2X 512MB Corsair XMS TwinX1024-3200C2PT (2 Modules, Memory Slots 1 and 2 used)
Audio - Sound Blaster Audigy2 ZS (PCI Slot 3 used)
NIC - Onboard nVidia MAC, Disabled Realtek NIC
Video - XFX Geforce 6800NU 128MB AGP (BIOS Rev 1) - NV Silencer 5 and AS5
Case - Thermaltake Damier Series 5000
PSU - OCZ Modstream 520watt (28A +12v rail)
HDD - Western Digital 1200JB 7200rpm IDE
DVD-ROM - Lite-On 16X DVD-ROM
Floppy - Mitsumi 1.44MB 3.25"
OS - Windows XP SP2/DirectX 9c
I have been fighting this issue for well over a month now and I am frankly nearly out of ideas, this does not necessarly prevent me from playing games, but this does interfere with the games I do play (especially online games). I do demand absolute stability from the games that I play and this issue only began AFTER I upgraded to the new motherboard, processor, and memory. The only thing I have not tried is something that I do not have access in attempting on this motherboard, and that is increasing the voltage to the chipset.
Here is my theory on what is going on is that I believe is there is a fault with the chipset on this motherboard and this is manifesting itself while I am playing various games on this system. Of course I would like to try increasing the voltage to the chipset as that would increase stability, but there is no option in BIOS to increase the chipset voltage like the previous motherboard I had (Abit NF7-S). It is possible that either a) the chipset is at fault and is causing me this issue or b) the chipset is not recieving enough voltage.
My question to the rest of you is this, what do you think the problem is and what ideas do you have that I may try that I have not tried yet. Additionally if there is nothing else that I may try should I attempt to RMA this motherboard and will that help, and is there any other versions of this motherboard that I should be aware of. I would appreciate any response from a MSI representative and any comments from those that may have positive suggestions for my issue. Thank you in advance for your time and any help that you may be able to render.
The GameMaster...
*EDIT* Added additional methods attempted... (there was a lot... so I did not remember everything that I have tried)

Quote from: dacull on 25-May-05, 16:06:33
Does it only happen in online games, or can it happen in all games? One thing to make sure of is to turn off CRC checksum offload in your NVidia MAC properties (everyone do this, it is incorrectly calculating checksums which leads to servers ignoring your packets). However as you have tried a different network card you can discount this theory.
For me it looks like the biggest culrpit is your 6800NU, i have read alot of bad things about the NU and you have a low bios revision there, just because it worked well against your old chipset doesnt mean it will work well against your current chipset. Sounds like a BIOS fix is needed as some timing is out somewhere.
Ensure Spread Spectrum is off (and as you have already pointed out Fast writes, ATI NV Speedup) and your card is running at default clock.
As a test beg/borrow/steal another graphics card (preferably nvidia) and see how it goes so you can narrow in on your video card.
It is not just one game, but it is more prodominate in certain games than others... the game in question here is Planetside... though I stuck a demo of Unreal Tournament 2004 on a loop bot match and it seemed to have locked up after 4 hours (not sure how many times it experienced that 5-10 freeze as I went to bed). As for the video card it was KNOWN working from a previous build in those same games (Previous build was a AMDXP3000 and a Abit NF7-S nForce2 motherboard). The only components different in this build is the AMD64, the MSI Neo2 K8N, 2 new sticks of Corsair XMS to replace the Corsair ValueSelects, and the SB Audigy2 as I would never use a software codec audio solution. Spread Spectrum is LOCKED in BIOS and disabled... ATI/nVidia speed up was disabled from the start... and I tried the Video Card at default clock, over clocked, as well as under clocked and the same issue resulted... as I said before it is NOT the video card.
There are two other things I could try is use my old Geforce4ti 4200 and see what happens... or even try out WindowsXP 64-bit edition as someone earlier suggested. I wish I could find a new BIOS for my XFX 6800NU, but there there is only the revision 1 BIOS that I was able to find. The mystery continues...
The GameMaster...

Pavilion d6 with Beats Audio and Windows 7: the Sound Stops When Headphones are Removed

The sound works fine, then I put in headphones and usually the sound plays fine, though sometimes it stops working after making a repeating sound for a second. When I remove the headphones the sound will not come out of the speakers and if I plus the headphones back in no sound comes out. The only way I can get the sound to work again is to restart my computer.
If I run the sound troubleshooter it doesnt detect a problem. I tried the fix in this thread http://h30434.www3.hp.com/t5/Notebook-PC-Sound-and-Audio/Beats-audio-pavilion-dv6-No-sound/td-p/2169..., but that didn't work. I would really appreciate a solution, thanks a ton!

Hi,
Try the following.
Download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp63501-64000/sp63555.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When done, shut down the notebook by holding down the left Shift key as you click on Shutdown to temporarily prevent a hybrid boot.
Unplug the AC Adapter and then remove the battery. Hold down the Power button for 20 seconds. Re-insert the battery and plug in the AC Adapter.
Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu. Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
Let Windows fully load - it will automatically load an audio driver, but just let this complete. Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, right click the speaker icon in the Taskbar and select Playback Devices. Left click 'Speakers/HP' once to highlight it and then click the Set Default button - check if you now have audio.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Audio Issues - Sound stops on youtube vid after a few seconds. Please Help?

What's been happening is weird audio issues, especially youtube related though not only (other web video content has been messed up, but mostly youtube). Right now I am using headphones (1/8" or 3.5mm) through the back of the computer and when I turn on the computer, at first I can hear sound from videos. When I open the speaker icon mixer window in the bottom right, I see green bar moving with the sound on the "speakers" mixer and "Adobe Flash Player" mixer simultaneously.
Then after a few minutes or after having a few tabs open, all of a sudden the audio stops. Oddly enough, usually the video keeps going even thought the audio has stopped. I verified this wasn't a hardware issue with my headphones by opening the Speaker Icon Mixer window, and acutally was watching it at the moment the sound stopped and saw the green bar disappear exactly when the sound stopped.
If I restart the computer, or firefox only sometimes (mostly need to restart cpu though) then videos will play again with sound. Once the sound stops however, if I open a new youtube video in another window, it will sometimes cause an "An error occured. Please try again later" crash.
I'm at a loss of what to do.
Running latest version of Firefox (26.0) and Adobe Flash (11,9,900,170 installed). Windows 7 64 bit system, Intel Core I7 Processor.
I have tried many things include "reset firefox", clear cache, changing to an earlier version of Flash (11.3). Tried to update sound cards. Even tried to restore computer to an earlier setting ( I only went two days ago, could go farther back I suppose).When I reverted back, the problem went away for a few hours but then came right back.
I scanned pc with ESET online antivirus, no viruses, Malewarebytes Pro, no issues. Cleaned with CC cleaner. Plenty of hard drive space (using an SSD boot drive btw).
I am not very knowledable about plugins or "addons" or extenstions. Nor do I know if it has anything do "Firefox Options -> applications" (gives content type and then option...essentially a bunch of sound file types and then which plugin plays it). I can give my list of all this out if necessary but there are quite a few and I dont know how to copy/paste that info so it would take. Even though its gonna take forever to hand type these guys all out, I will give my list of "plugins" that may be audio related:
QuickTime Plugin 7.7.4 7.7.4.0
RealDownloader Plugin 1.3.3.66
RealNetworks (tm)
RealDownloader Chrome Background Extensions Plug-in (32-bit) 1.3.3.66
RealNetworks (tm)
RealDownloader HTML5VideoShim Plug-in (32-bit)
1.3.3.66 RealNetworks (tm)
RealDownloader PepperFlashVideoShim Plug-in (32-bit) 1.3.3.66
RealPlayer Download Plugin 16.0.3.51
RealPlayer(tm) G2 LiveConnect-Enabled Plug-In (32-Bit) 16.0.3.51
Shockwave Flash 11.9.900.170
Shockwave for Director 12.0.7.148 (for netscape plug-in)
Shockwave for Director 12.0.2.122 (for netscape plug-in)
Silverlight Plug-In 5.1.20913.0
VLC Web Plugin 2.1.0.0
When I open my device manager and look at "Sound video and game controllers" I see 4 options:
1)AMD High Definition Audio Device
2) Bluetooth Audio Device
3) High Definition Audio Device
4) Intel (R) Display Audio
I'm not sure what this means, if I have 4 sound cards or if they are conflicting somehow.
I tried to update drivers on each one. No change. I've tried "restarting firefox with addons disabled" and "check here to see if your addons are up to date" (they were except VLC which I did update before restoring to previous day and it didnt help).
None of the fixes work for me, same issues. Extremely frustrated!! Help?

I'm having a similar problem with flash audio. After a few minutes of watching a video or playing a game the audio cuts out but the video keeps working. The audio does not return until I refresh the page. The issue occurs regardless of which browser I'm using (have tired both Firefox and Chrome). Oddly enough, when the audio cuts out from whatever flash application is running, my entire system loses sound until I refresh the webpage or close the browser. For example, I was playing Minecraft with Chrome open in the background and suddenly the sound cut out from both. Once I closed the browser my audio came back. I realized that there was a graphic on the webpage that was flash based which likely triggered the issue.
I do not have any Real plugins.
Incidently I also have Intel (R) Display Audio listed in my device manager
Edit: I forgot to mention, this issue only seems to occure when I watch videos that have been uploaded recently. For some reason the audio does not cut out when I watch a video was uploaded a few months ago.

Sound in a game!

Hi guys!
I'm writing a game for Sony Ericsson K700.
And i have a problem with a sound. Also i'm working with MIDP 2.0.
My problem is to play 2 sounds in a game. When i play first sound, it play good, then is playing second sound and i have exception.
However, can somebody write an example, how to play several sounds in a game.
Thanks!

Hi,
To overcome this problem you can go with multiplayer of Sounds. Multiplayer is like
creating an array of players.
Normally this is the way to create a single player
          InputStream is;
Player player;
          try
               is = "a".getClass().getResourceAsStream("/abc.mid");
               player = Manager.createPlayer(is, "audio/midi");
               Sounds are of different types. MIDI, WAV, AMR. The below is the code for creating players
               depending on their type.
               player = Manager.createPlayer(is, "audio/midi");
               player = Manager.createPlayer(is, "audio/wav");
               player = Manager.createPlayer(is, "audio/amr");
               player.realize();
               player.prefetch();
               is = null;
          catch(Exception e)
               System.out.println("Exception in loadsound"+e);
               return false;
void playSound(){
stopSounds(); // better to stop any sounds playing
player.start();
the above is the code for creating a single player. So, Instead of creating a single Player object ,
go for the array of Players.

GT70 Dominator Occasional Short Lag (Gameplay Continues But Sound Stops?)

Hello. Just wanted to say that this is a great laptop overall. But soemthing's been bugging me.
Every so often, games seem to have trouble loading certain things. When I play Payday 2, for example, the computer seems to wait a few seconds before actually showing items in the inventory. Also, sometimes during games, the sound cuts out, then plays audio that was supposed to play before the sound cut out. I have not been able to pinpoint a thread with my issue, so I hope that it is fixable. I can try to post a video of my issue if need be.
Please help?

No no nononono I don't see $200-$400 as "inexpensive". I'm already in the hole around $1400 and I'm getting barely $35 a week. I'm already pushing the limit as it is, even more so spending under $100 on another hard drive.
HOWEVER!
I did some research into this particular brand of HDD and it seems that they are known for drives that go to sleep after an extremely short amount of time (most say around 30 seconds, a few even say eight seconds). A user (shinhikari) even posted a possible solution:
Quote
I've tried The Crystal Disk Info utility and I think it's the best workaround we have right now... Set the APM to 80h and the drive won't spin down... The latest Crystal Disk Utility has the option to set APM automatically... so whenever you re-plug the HDD, it will automatically set the APM to 80h... That's it... this solve my problem and I don't think WD is coming up with a solution... so this is your best bet...
Okay here what I did,
Set the program to run on start up and be a resident:
Function -> Resident (ticked)
Function -> StartUp (ticked)
Set the APM from 60H to 80H:
Function -> Advance Feature -> AAM/APM Control -> Choose your WD drive from the dropdown menu -> set APM to 80h
Set the program to automatically set APM to 80h:
Function -> Advance Feature -> Auto AAM/APM Adaptation (ticked)
And lastly, set the program to auto detect newly connected drive:
Function -> Advance Feature -> Auto Dectection -> 30sec (you can make this faster if you want)
That's it... I hope this solve your problem as well
And here is the APM value as stated by Crystal Disk Info utility...
00h Reserved
01h Minimum power consumption with Standby
02h-7Fh Intermediate power management levels with Standby
80h Minimum power consumption without Standby
81h-FDh Intermediate power management levels without Standby
FEh Maximum performance
FFh Reserved
So I think you can set the APM value to other value as needed...
In my opinion, if you are a heavy user, you can safely stay at 80h or above, it eliminate the need for the drive to go into standby... this logically reduce the mechanical wear of the drive...
But if you are not, you might want to set up the APM to 7FH or below... so it will still go into standby but after a longer idle time (not just a silly 8 seconds!)... I haven't tested this... but it is supposed to do as I think
Anyway do it at your own risk okay... I don't want to be held responsible
I have yet to test this out, but I'm feeling optimistic this time.

While watching rented movie it stops during playback, how do i fix it?

I rented a long movie and it continues to stop during playback, how do I fix that?

Hi dedesgirl,
Welcome to Apple Support Communities.
It sounds like there is an issue playing songs in iTunes. Does the playback issue only occur with specific tracks and were they purchased from the iTunes Store? Take a look at the article linked below and try the suggestions which will resolve most iTunes and QuickTime Player playback issues.
iTunes and QuickTime for Windows: Audio does not play or plays incorrectly
http://support.apple.com/kb/TS1362
I hope this helps.
-Jason

Blackberry Curve 8330 OS 4.5 sound "crash"(all sound stops)

Issue: No sound of any kind for anything. When calls, messages, or notifications are recieved the LED blinks as normal and the phone will vibrate if it is set to. Sounds do not play for any notification or in the media player; All sounds show up properly and their lengths display as normal however when play is pressed almost nothing happens. The play button changes to pause(as it should during playing) and a progress bar appears, but the player stops almost immediately and without playing any part of the sound(the changes are only visible for a moment).
What causes the issue: Unsure. I believe whatever underlying portion of the OS that controls sounds is crashing when it is called to play a sound, but I don't think it's any sound in particular. The first time I encountered this issue I was changing notification tones and browsing through the list of sounds. The sounds were playing as normal and then simply stopped upon selecting a tone from the list(there was the normal delay as if it would play the sound, and then nothing). I had played the sound before, and it was a default sound. This time(the second time) sound stopped as I recieved a notification.
How to solve: Temporarily, popping the battery out and putting it back in seems to reset the issue. It doesn't happen very often, but I haven't found a consistent trigger other than trying to play a sound(any sound). For good? That's what I'm hoping you can tell me. Could this be a bug with the way the current OS version on the 8330 hardware handles audio? I hope this is something that can be fixed, or will be in the future.
Message Edited by Spewn on 09-11-2009 07:25 PM

You can download the software from Alltel's webpage. For assistance upgrading please see the link below.
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=ex&bbid=TSEBB_1206041566938&url=&stat...
Feel free to give Kudos if I have helped you.

Sound stops during games

Similar Messages

Maybe you are looking for