Sound suddenly stopped working after reboot

I just got KDEmod installed and working.  Sound was working in it before I rebooted, to get ntfs-3g and hal working so I could mount my Win7 partition.  When I got back into KDE, I was notified that "The audio playback device *** does not work. Falling back to ."  I googled around all day, but couldn't find the cure for this.  Before the reboot, I installed hal and dbus through pacman, and added them to my DAEMONS=
I'm thinking it has something to do with hal or dbus somehow, is there anyway I can undo what I did?  Or is there anyone else who had/is having this problem that could help?

Same issue here after upgrading from KDE 4.2 to KDE 4.3.
Whenever a system sound has to be played, I have this notification:
"The audio playback device does not work Intel ICH6 with STAC9750,51 (Intel ICH6). Falling back to default."
Then it does fall back to default device and correctly plays the sound.
However, when I run JuK, after displaying this same notification, I have no sound, or rather, I rarely have sound (sometimes it takes a couple of seconds to start to play, more often it does not start at all).
I don't know if it's related, but video stopped working as well after migrating to KDE 4.3: Dragon Player just hangs when I try to open a video file ?
And yes, my user belongs to audio group, and video...

Similar Messages

  • Sound Suddenly Stopped Working After PC Restart

    The title says it all, my sound stopped working after I restarted my PC, I got these screenshots to try to help.
    http://prntscr.com/4urkk9
    http://prntscr.com/4urkoc
    http://prntscr.com/4url97
    My PC is a Compaq CQ58, and this same thing happened before over a year ago, I simply system restored it, but I don't want to have to do that again.

    Hi
    Go to device manager and uninstall the sound driver then restart the unit and check if sound is back.
    Try to update the Sound and Bios from HP website.
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • My sound suddenly stopped working, how do i fix this?

    my sound suddenly stopped working after i unplugged my headphones, how do i fix this?

    Common problem.
    Check the headphone port - if you can see a red light, the port is still live, cutting off the internal speakers.
    The cause is a little leaf switch that is pushed over by the jack when you insert it. Sometimes these stick.
    Try inserting and removing a jack a few (dozen) times.
    If that doesn't free it you may attempt to tease it with a slim non-conducting tool (like a toothpick). Ensure the Mac is not only shut down, but unplugged if you try this.
    And be careful; the leaf is fragile and it's an expensive bit to get to and replace, in fact on some models it's directly on the logic board.

  • GPRS services suddenly stop working after some time abt 4 hrs.Airplane on off solves it

    I am using a factory unlocked iPhone 4 GSM in India. Iam currently using it on airtel network 2G services i.e GPRS services. Now the problem I have noticed is that the GPRS services suddenly stop working after some time say about 4 hours. Then what i do is to turn airplane mode on and then off or restart the phone and GPRS starts working. Agan after some time I have to repeat this exercise. Please help soon. This is happening since the time i bought this phone i.e from past 20 days. I have tried allpossible network settings and resetting network but nothing helped. everything else is working perfect.

    Hi Syed,
    I have also started facing the exact same problem since the past few months with my docomo service.
    Earlier, EDGE / GPRS used to work just fine from my workplace where the network was good.
    But recently, I got my iphone replaced, due to a network problem, from an apple store in indianapolis, and also upgraded to ios 5.....so not sure now whether this intermittent EDGE / GPRS outage is due to the new hardware or the new OS.
    Did you upgrade to iOS 5 and did it help?
    PS: iOS 5.0.1 also doesn't seem to be helping, I still need to restart the phone to get EDGE / GPRSt to work.....will try out the airplane mode thing....at least that shouldn't take as much time as a full reboot.
    Regards,
    Hemant

  • After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working, After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working!

    After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working, After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working? Can it be recovered or a Hardware has to be replaced. I tried restoring my phone, but it did not work. Any solutions?

    alisportshots wrote:
    I have a similar problem, but after following your suggestion of deleting my iphone backup and then turning backup back on again, I needed to plug my phone into my computer to sync the backup.  I re-tried to do an icloud backup and it again told me that  "the last backup could not be completed"... since I had deleted the backup, it says the "Last backup:  never".  Ugh. I reconnected my iPhone 4S to my computer and iTunes so I could sync my phone and do a backup... it's still "waiting for sync to start"...
    For your iCloud backup, you may have an app that is preventing the backup from succeeding.  To locate which one, go to Settings>iCloud>Storage & Backup>Manage Storage, tap the name of your device under Backups, under Backup Options tap Show All Apps, then turn them all to Off (including camera roll) and try backing up again.  If it succeeds, then the camera roll and/or one of your apps is preventing the backup and you'll have to located by process of elimination. Turn the camera roll On and try backing up again.  If it succeeds, turn some of your apps to On and try backing up again.  If it succeeds again, turn some more apps to On then try again; repeat this process until it fails.  Eventually you'll be able to locate the problem app and exclude it from your backup.
    If you turned iCloud backup off and try to sync to create a backup on your computer and got a "waiting for sync to start" error, it may be caused by a corrupt backup on your computer.  You could try deleting your last backup by opeing iTunes and going to Preferences>Devices, clicking on your last backup and clicking Delete Backup.  Then try again.

  • Add-ons for android Firefox stop working after reboot

    I have Firefox (ver. 21.0) installed on my Ramos W30 tablet running ICS (4.0.4) and my UG007 android stick running JB (4.1.1). They both have the same problem. After a reboot, the add-ons stop working. If you look at the add-ons, all the info which would show below "options" is gone. The only way I've been able to get them working again is to uninstall and reinstall the add-ons.
    Any other way to fix this or prevent this from happening?

    I only use 2 add-ons and it happens with both. I use adblock and tabstothefront. They both stop working after reboot.

  • Bonjour printer on Windows XP's stops working after reboot

    Hello!
    We have a AirPort extreme with an HP LaserJet 1010 connected to it. AirPort Extreme also serves as a gateway and DHCP server for the LAN.
    Installing the printer on the local machines running Windows XP thru Bonjour works fine and all the documents are printed correctly. The printer is being installed as a single default printer on the system.
    However, printer stops working after Windows XP machines are rebooted (the next morning). The installed printer keeps accumulating documents in queue and not spooling them to the printer. Issue could only be resolved by adding a new printer (which also works fine).
    It seems not to be a connectivity problem as XP machines access the Internet thru the AirPort Extreme without any problem. Bonjour printer setup wizard also instantly sees the printer and is able to install it correctly. Mac's in the same network (iBook G3 and PowerBook G4 with Tiger) are not affected by the issue.
    Any ideas on how the situation could be corrected?
    - Baglan

    Did anyone find a solution to this.
    I have a HP Laserjet 1020 attached to my Airport. Using the Bonjour program on my Windows XP computer it found the printer attached, and added it to my printers. When I print all seems ok - it appears in the printer queue, then disappears as though its printed - but nothing comes out of the printer.
    Any ideas? Thanks.
    Message was edited by: jonny999

  • Sound suddenly stopped working.

    Hi, my sound on my HP ENVY 15 Notebook PC just suddenly stopped working the other day. Everything says that it is functioning, and my drivers are up to date, but I cannot seem to get the sound to work out of my speakers or out of headphones. 
    Product Number: A9P60UA#ABA
    Running Windows 7 Home Premium 64-bit
    If you could help, that would be wonderful! Thanks!

    Hi,
    Try the following.
    Download the IDT Audio installer on the link below and save it to your Downloads folder.
    http://ftp.hp.com/pub/softpaq/sp56501-57000/sp56900.exe
    When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers.  Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
    When complete,download and reinstall the Chipset driver on the link below.
    Chipset Driver - Windows 7.
    When this has completed, shut down the notebook, unplug the AC Adapter and then hold down the Power and Beats buttons for 10 seconds.  When done, reconnect the AC Adapter.
    Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu.  Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
    Let Windows fully load - it will automatically load an audio driver, but just let this complete.  Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation.  When this has completed, right click the speaker icon in the Taskbar and select Playback Devices.  Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • New mail sound suddenly stopped working

    I assigned a 'new mail sound' (wav file) and for no apparent reason suddenly stopped working. Anyone else experienced this ?

    This sometimes happens to me too, as well as my alerts with iChat. I have to restart the computer and that fixes it for me. Hope that is the case with you as well.
    Christine

  • Sounds suddenly stop working

    Certain sounds on my iPhone (text alerts, text sent sound, etc) will suddenly stop working.  I will get notification of an incoming text with a sound all day long and then out of the blue there will be no sound to accompany the alerts anymore.  When I send a text, I always hear a sound when it sends the text...but just like the alerts, the sound for that will suddenly quit too.
    Yes, I've checked the loud/silent switch.  I've checked the volume.  The only thing that seems to fix this issue is powering off and back on.
    I don't use headphones (I've seen this can sometimes cause the silent mode to get stuck) so that isn't the problem.  I thought maybe it had something to do with the bluetooth connection in my car but the sound will quit sometimes when the bluetooth is off and I'm nowhere near my car.
    I had this issue with my iPhone 4s and just put up with it until I got the new iPhone 6, figuring I wouldn't have the issue anymore with a new phone.  My iPhone 6 is still doing this so I'm guessing there is some crazy, hidden setting somewhere I'm not aware of, or there is something wonky in the iOS.
    This is incredibly frustrating as I have not known about an urgent message because the phone didn't make any alert sound to let me know I received a message.

    Was wondering if you had found a solution for this?  I went to the Genius Bar 3 seperate times to get this exact issue resolved.  First they reset my phone as a new phone, then they replaced my speaker, and finally they replaced my phone.  Still, with a brand new phone, it is happening.  I have iphones for a long time and do not believe I am doing anything differently.  Have you found something that worked for you?  Thanks!

  • Sound suddenly stops working (Youtube)

    Hi!
    Since I installed a Flash Player update 1-2 months ago, the sound in almost half of the videos I watch on Youtube suddenly stops working (usually only in videos that are longer than 10 minutes). First there's a short crackling sound (not all the time, though) and then the sound simply stops, even though the video is still playing. Reloading the page or jumping ahead a few minutes, then going back to the original spot usually only fixes it for less than 5 minutes and if I do that 2 or 3 times, the sound won't even be there for more than a few seconds. Restarting Firefox doesn't help, either. If I want to try again with the same video a few days later, the problem occurs again.
    I'm using headphones (Sennheiser HD 201) that are plugged into speakers (Logitech X-140) but I'm 100% sure that those aren't the culprits since I can listen to mp3s, watch videos (avi, mp4, doesn't matter) or play games just fine and the problem has never ever occured while doing that. So it definately has something to do with the update 1-2 months ago and the latest update (maybe a week ago) didn't fix it. I also already saw a few comments on videos I'm experiencing the problem with about the sound suddenly stopping.
    OS: Windows 7 (64 bit)
    Browser: Firefox (36.0.4) - also tried loading the video in IE11 but all the buttons (quaility settings,...) were missing, so I closed it again.
    Flash Player: 17.0.0.134
    Any idea how I can fix the problem and if there's already a fix in the works?

    Most of the videos on YouTube these days are HTML5.  If you right-click on the problem video, are you getting About Flash Player, or About HTML5?
    If it *is* Flash, do you have the same problem if you disable Hardware Acceleration?  See the section on it in the troubleshooting guide below:
    Video playback issues

  • My iPhone sound suddenly stopped working.

    I have had my iPhone 4s for over a year with no problems other than the occasional slow down, etc. Just last night, the sound on my phone randomly stopped working. It will work for a few seconds then stop, and just keep doing it. Its my ringtone, text tone, keypad tone, music, and video apps. I've tried turning the phone on and off with no luck. I just want to know why my phone has suddenly started doing this when it was just working fine and how to fix it. Please help?

    None of these methods worked, so I just took a very thin paintbrush and dampened it using a Clorox wipe. Then, I just wiggled it around in the charging port. The sound worked for like 3 seconds then it stopped again. So I continued to clean it and it worked! After I listened to my music for about 30 minutes until it stopped again. I just blew hard into the port and it started working again. I think the problem was that the phone thought it was docked into speakers because it was so dirty. I think I'm going to get an Otterbox so this doesn't happen again. I hope I helped.

  • [solved?!] Sound suddenly stopped working (arch in vbox vm)

    Hi all,
    I installed arch-i686 in a VirtualBox virtual machine a few days ago and at first, everything worked well, including audio. The guest additions are of course installed and running.
    After making some updates with "pacman -Syu" the sound stopped working. There is no error message when I start e.g. vlc from a console and let it play an mp3-file. But there is no sound at all.
    I already increased the volume of all the channels in kmix and alsamixer without success.
    Can someone give me a hint?
    Thanks in advance & kind regards,
    jamesbond007.
    Last edited by jamesbond007 (2010-01-01 23:56:38)

    Well, after a reboot of the host (not guest) os it now continues to work!
    I don't understand why, but I'm happy about it nevertheless.

  • Bluetooth USB Dongle stops working after reboot of 10.5.3

    Hi,
    I have been using my Mac Pro 2.66 with a USB Bluetooth dongle "Sitecom CN-521" and Apple's wireless keyboard (white one) and Mighty Mouse wireless.
    All worked very fine together.
    Then suddenly after rebooting 10.5.3, bluetooth is not available.
    I first thought that the dongle was dead.
    To find out, I tried the dongle on a PowerMac G4 733: it worked perfectly.
    Then I thought it might be a hardware problem with the Mac Pro. To be sure, I installed the Vista drivers of the USB dongle on my Mac Pro (through VMware Fusion). It was recognized by Vista. I could even use my wireless keyboard in Vista, thanks to the dongle. But on 10.5.3, bluetooth was still dead and I could not use the keyboard.
    It was a strange feeling to use my wireless keyboard on my Mac Pro, only in Vista and not in Leopard!!!!
    So it is not a hardware problem (either dongle or Mac Pro). It is a software problem with 10.5.3.
    I tried to reboot while unplugging all usb devices and then replugging them after startup is over: no improvement.
    So basically, I think of 2 options:
    1. either it is a 10.5.3 software problem.
    2. either a clean install on my HD could clear this problem.
    Does anyone of you has the same problem?
    Any solutions?
    Thanks in advance.

    I answered this question on my own. I was able to utilize Pacifist and reinstalling the video card drivers and display profiles. Now everything works as it should.

  • My Zii Sound D5 stopped working after one year

    Hi there,
    After one year of enjoying my beloved Zii Sound D5 it stopped working with any apparent reason. It just does not switch on.
    I dont have any technical knowledge but after reading a few messages in the forum my guess is that the problem is related to a power spike.
    Can anyone help?
    Thanks

    Tobago82,
    Have you tried plugging the speaker to another power outlet? If you have not done so already, please contact our Customer Support for assistance.

Maybe you are looking for