Sound Switches Between Thunderbolt Display and MacBook Pro

I have an Apple Thunderbolt display and MacBook Pro set-up with dual screens. I have an iPhone plugged into a dock that runs to the display. When I have music playing out of the display and I disconnect my iPhone, it switches the sound to the MacBook Pro.
1. How do I stop this from happening?
2. If I can't stop it from happening, how do I move the sound from the MacBook Pro back to the display?
There doesn't seem to be any options within Preferences/Sound to change it back.
Thank you.

I've a Spyder4Elite that I use on both my Thunderbolt Display and on my MBP - and, while both are calibrated, they don't - and cannot - 'match' one another, no matter how hard I try.
I suspect that you're running up against the same wall? Different technologies in different displays. I doubt that you'll ever get a perfect match: mine are just 'good enough'.
Clinton

Similar Messages

  • Chain Time Capsule, Thunderbolt Display and MacBook Pro

    I would like to setup the following configuration?
         TimeCapsule <== ethernet cable ==> Thunderbolt Cinema Display
         Thunderbolt Cinema Display <== thunderbolt cable ==> MacBook Pro (thunderbolt port)
    Does this configuration support the following concurrent connections?
         to Time Capsule through thunderbolt port
         to Internet through airport wireless card
    I would like to assess this configuration before the purchase.

    I've a Spyder4Elite that I use on both my Thunderbolt Display and on my MBP - and, while both are calibrated, they don't - and cannot - 'match' one another, no matter how hard I try.
    I suspect that you're running up against the same wall? Different technologies in different displays. I doubt that you'll ever get a perfect match: mine are just 'good enough'.
    Clinton

  • Thunderbolt display and macbook pro calibration

    I have a macbook pro mid 2011 and a thunderbolt display and they both have been calibrated by a Spyder device, I sometimes grade images on my laptop but when I get back to the office the shots look different, any ideas?t

    I've a Spyder4Elite that I use on both my Thunderbolt Display and on my MBP - and, while both are calibrated, they don't - and cannot - 'match' one another, no matter how hard I try.
    I suspect that you're running up against the same wall? Different technologies in different displays. I doubt that you'll ever get a perfect match: mine are just 'good enough'.
    Clinton

  • How do I sync Pages and Numbers between my iPad and Macbook Pro?

    I know there is a way to use iTunes to sync my Pages and Numbers files between my iPad and Macbook Pro, but I can't seem to find the app or software or instructions. I've searched iTunes and all I've found are the apps that I already have installed on my iPad. Can someone tell me where I can find the right downloads and instructions? Thank you.

    The exact same way as in the old version.
    Option 1) Select the content desired to sync and sync.
    Option 2) Drag and drop the content onto the device.
    If the side bar is needed/desired, typing Cntrl + S will display it.

  • Syncing mail between iMac G5 and Macbook Pro

    I work at home on a G5 and regularly read and then delete or file my emails. I regularly sync between my G5 and Macbook Pro, which I use when traveling. My syncing routine works fine with the address book, calendar, etc., but when I go my Macbook Pro Mail account after syncing, the inbox is still full of mail that I have already read and filed on the G5. Is the syncing routine designed to replicate the mail accounts or do I need to reread, delete, and file the emails on the Macbook as well.
    PS: I am using email accounts with cox.net, i.e., not mac.com accounts.
    Thanks for any help.
    FLL

    The underlying issue here is that you have chosen to use POP3 rather than IMAP mail accounts. Only IMAP mailboxes are 'synchronized' by default: it is virtually impossible to synchronize POP3 mailbox content.
    For a discussion of POP3, IMAP and mail synchronization options, take a look at the Mail & Address Book - Tiger forum located here.

  • AirDrop used to work between my iMac and MacBook Pro. Now, when I try to transfer a file (either direction) I get a message that my certificate is invalid or that the file has not been accepted. What do I do?

    AirDrop used to work between my iMac and MacBook Pro. Now, when I try to transfer a file (either direction) I get a message that my certificate is invalid or that the file has not been accepted. What do I dot correct this?

    Message was edited by: leroydouglas
    better yet, try this solution:
    https://discussions.apple.com/message/12351186#12351186

  • How do I sync my icloud calendar between iPhone 5 and macbook pro without a 1 hour difference? I've made sure that the time zones are the same on all devices and it's still doing it.

    I cannot get my iphone 5 and macbook pro to display the same time on my calendar. There is a one hour  difference between them and it is driving me crazy!! Please help!!!

    Did you also confirm that the time zone was set correctly on icloud.com (click on your name, check Time Zone)?

  • Apple Aluminum Keyboard and 23" cinema Display and MacBook Pro??

    Hello there
    I have just purchased an Apple Aluminum Keyboard and have and MacBook Pro with and 23" cinema display, and if i try to connect the keyboard to my cinema display via USB the keyboard don't work.
    i have an Apple mighty mouse that works fine wen connected to the USB port on the display...
    why is it not working...

    have you tried a different USB port on the ACD? Maybe the one you used was defective? I run a 7-port bus off one of the USB ports for all my hardware. OTOH, I do use bluetooth mouse and keyboard!

  • Handoff won't work between iPad Air and Macbook Pro

    I'm trying to get handoff to work between my iPad Air and Macbook Pro (Late 2013). I have tried turning all devices on and off again, turning the handoff on and off again and turning iPhone Cellular Calls on and off again on both devices.
    Does anyone know how to fix this issue?

    This fixed your connectivity problem. However, I don't think this has actually fixed any problem.
    I think this Handoff feature is buggy. I have three devices -- a MBP, an iPad Mini, and an iPhone 5 -- and I have done "the dance" you've described and only one of my devices, the iPhone, is now Handoff capable. The iPad Mini still doesn't support Handoff.
    I think there is a problem in the software and that all of this signing in, signing out, powering on, powering off, is just getting the devices to clean themselves up so that stuff can start from a fresh slate and attempt to work together again...sort of. It's not necessarily guaranteed.

  • What's the best way to share my Aperture and FCPX projects between an iMac and MacBook Pro?

    Greetings,
    I own both an iMac and MacBook Pro and I'm interested in figuring out the best way to have access to my iTunes, Aperture and Final Cut Pro X files not only when I'm at home using the iMac, but when I'm out and about with the MBP.
    I'm sure there are others among us who require a similar setup so I was hoping you guys could share with me how you solved this little problem, and also inform me of any potential negatives for your method so that I'm well prepared. Thanks.

    Best is a subjective term, as it will ultimately come down to preference. The fastest however, would be to wait until they market has a few thunderbolt drives available for purchase...
    But like the first poster stated, a firewire 800 drive, would be the more convenient choice for now. Or you could set the shared folder on your iMac to be avaible on your network and use it to allow your MBP to access it wirelessly.
    Obviously whatever you change, just save it back to the same folder on the iMac. Keep in mind it will not be as fast as the first suggestion (unless it is a wired network), but may be usefull for smaller files.
    However, you should have everthing backed up via an external drive, that is always useful...

  • Sharing Files between Windows Vista and Macbook Pro

    Hi everyone!
    I have just bought my first Macbook Pro and I love it. I am running Windows Vista on my desktop and connect wirelessly to the internet via a Netgear router. I have managed to connect to the internet with the Macbook Pro wirelessly too.
    I am not sure how to set up file sharing between the PC and Macbook - can anyone point me to some SIMPLE instructions please?
    Many thanks

    this is a wonderful article! thanks so much!
    only one small change though. you don't really need to create another user ID to access the windows machine. i used my existing ID and it logged on fine!
    but still, thanks for the rest of the article. i was totally lost without it...

  • How can I share my LR catalog between Mac Mini and MacBook Pro?

    How can I share my LR Catalog between my Mac Mini and MacBook Pro?

    Your Lightroom license key is
    a. Single user / owner
    b. You are allowed two active installations, with one in use at any point in time.
    c. It is cross platform Mac and or PC.
    d. You can install / uninstall as many times it is necessary, as long as you meet the criteria above.
    The latest updates can be accessed from the link below.
    Product updates

  • Share cinema display between Mac Mini and MacBook Pro

    Hello -
    I am keen to get an LED cinema display to use on my new MacBook Pro - but I share my study with my children - so want to give them a MacMini to use.
    How easy is it two swap between the MacMini and the MacBook Pro ? I guess there is only one input in the LED cinema display ???
    Thanks in advance.
    Andrew

    Interesting - I have the same idea: sharing a 24" cinema display between a Macbook Pro for myself and a Mac mini for my wife.
    The only problem I see is that the display doesn't have any Firewire ports. So if I want to use an external harddrive (or a mini-DV camcorder) on both computers when connected to the display, then I'd have to plug that into the computer instead of the display ...

  • Calibration issues with 23" display and Macbook Pro 13".

    Hi All,
    I'm a photographer and link my Macbook Pro to a 23" display in order to edit my work.
    I have calibrated both displays with a gretagmacbeth eye-one display 2, however, despite this, when I move images between screens they change considerably, most noticeably the values of reds. I appreciate the laptop display is never going to be as bright as the stand alone, but am I asking too much for the colours to be the same?
    I look forward to receiving any suggestions from those who've had similar experience, or those who are experts in the this field.
    Thank you in advance!

    Hi!
    Well for me theres 2 types of click,
    1. one when u click and sounds (this one is pressing harder the trackpad)
    2. another is softer when just need to put ur finger over the trackpad.
    i use more the second one, thats why i say i rarely use the first one.
    Thanks for answering
    Regards

  • External display and macbook pro

    Is it possible to connect 2 dvi external monitors to a new macbook pro? I am a photographer and want to use 2 displays when I use the macbook omn my desktop. michael

    Apple did actually acknowledge this as a known issue with people running 10.5.2 with the graphics update, and are investigating it. There's some further discussion at this thread:
    http://discussions.apple.com/thread.jspa?threadID=1394449&tstart=0
    Anyway, what worked for me was powering down, connecting my external display, keyboard, etc., powering up, and immediately closing the lid. It seems to behave better now, though I haven't rebooted since, although I have switched back and forth between running with the external display, and running without it, without any problems.

Maybe you are looking for

  • What is the best Compressor settings for burning a 2 hour DVD on single layer disc?

    I have a 2 hour (120 minutes) project timeline which I want to encode in compressor to fit on a single layer DVD. Do I need to change the Bit Rate to make it fit on a single layer? Or can someone post the settings or link to where I can find the best

  • Load balancing after ECC 6.0 upgrade

    Hi I we this configuration on ECC 6.0 upgrade: SAPGUI 7.10 SAP_BASIS  700  Patch level 15 SAPportal ESS Webdispatcher Installed Internal ITS Single sign-on Can somebody assist as with identifying the problem with load balancing (PUBLIC) E.g. When run

  • Multiple values for a field

    Hi All,         In the vendor repository, i have fields like Phone No, Fax Number, Email addresss which should hold multiple values. i.e One vendor may have have multiple phone no's or email address. How should this be managed. Is it by the Qualifier

  • Can't make or receive calls all of a sudden

    I have a black berry z 10 and after I did the update today I can't make or get calls help I'm really stressing out

  • Using logging in WebDynpro application

    Hi All,          I m working on webdynpro application. when ever error occurs at runtime , the entire error log is diplayed on browser thus showing code details to user . how cn i avoid showing error log in browser ?? i hv read about logging , will i