Sound sync errs in Encore (PP4.0.0)

A show that plays fine in PP CS4 when processed thru Encore produces a DVD in which the sound and picture are almost one second off. I've used Premiere for 10 years, Encore occasionally for 3-4 years, but have not encountered this. (This is on a Mac Pro.) Any ideas?

>A show
What does that mean?
What are you editing?
How do you get your video to Encore?
More information needed for someone to help... click these links and provided the requested information
-http://forums.adobe.com/message/4200840
-http://forums.adobe.com/thread/416679

Similar Messages

Loss Of Sound Sync - FC7

Hi Gang
Working with FC7 in Snow Leopard 10.6.8 and an older Mac Pro.
Exported a 70 minute clip and noticed loss of Sound Sync, (about mid way thru in a QT File). The clip is a mixture of assorted clips.
Divided the 70 minute clip into 3 separate exported clips which produced proper 'Synced Sound' in each clip.
This problem used to occasionally happen in FC6 - Does anyone know a fix or work-around?
Thank You
Mike

"You've been in these forums long enough to know that FCP doesn't work well with non-FCP media"
Shane - I don't appreciate your constant negative replies - do me a big favor, and avoid responding to any more of my posts.
Yes, I've been here long enough to know you've always had a condescending attitude ....
Your approach is NOT helpful. Its rude and disrespectful ....

Film sound sync

Hey all,
I'm doing my first film and sound sync. I wanted to make sure I was doing things the right way, as I am handing off the project to another post facility once the sync is done. We are both using FCP, aand I've got a call into the editor to make sure I'm getting to him what he needs. However, I wanted to run it by the experts (and elitists ;.) here to make sure I was doing it correctly.
The film has been transfered to digibeta, and I have wav files with embedded timecode for audio. I'm assuming the embedded timecode, is location generated timecode in the portable dat or flash recorder that was used on-set. So the timecode doesn't match the timecode on the digi-beta. I will just use slate timecode to match to the timecode in audio file.
So, what I planned on doing was just digitizing the digi-beta, logging it by scene. Then importing in the wav files. Then I'll watch for the slates in the footage and sync them in the sequence with the audio. Simple as that.
Is there another way that I should be doing this? Is there a way to export the clips, so that I get a combined audio and video clip, that retains the timecode information of the digital beta?
Thanks for any insight.
Chris

well, we usually sync in telecine for expediency in order to get sync rushes (dailes) to set but in addition we always load the location audio into the system (usually as BWAV files) and sync ourselves. that way we keep control of all the audio media through the post process i.e. we copy the audio media onto a drive for the sound dept and when the time comes we give them reference OMFs and they can reconnect to the master audio tracks.
this is mainly due to the way we work with PAL in the UK (we telecine fast at 25fps) and also the fact that we usually telecine to Beta SP rather than Digibeta for offline purposes.
mind you the current film i'm working on here is NTSC (it began life in Canada) and we have all the original audio in the system.

Problems with image/sound sync

I have been using my facetime camera to record sound/image and automatically import it into iMovie11. I have a fully up to date iMove 11, and am using a brand new MacBookPro Retina13. The sound is badly out of sync in the project, and even when I detach the audio and move it to sync, it remains out of sync later in the piece. Help!

Hi Jungleboy6 and tje1976:
Somehow the default Picture Import folder path has been corrupted in your registry. We’re trying to get to the bottom of this problem. If you could give us a little more info, it would be very helpful.
Here are the steps to follow to fix this issue:
- Start->run, type ‘regedit’, enter
- Navigate the tree to this location: HKEY_CURRENT_USER\Software\Research In Motion\BlackBerry Media Sync\Settings
- You should see a setting on the right called “PictureImportPath”
Before you do anything, can you take note of what the current value in the ‘Data’ column is?
To fix the problem, double click ‘PictureImportPath’ and change the value data to a valid folder path on your computer. Ie C:\MediaSyncImportPath
Hit Ok. Close Regedit. Restart the application.
Let me know if this works. And if you could let me know the value it was set to and also your Operating System, it would help us track down the underlying problem.
Thanks.
Need additional information on BlackBerry products?
visit: http://www.blackberry.net

HDMI Sound Sync Problem

I've rented 5 movies and watched a couple of podcasts via Apple TV. In 5 of the 7 screenings, we've experienced problems with the sound failing to sync to the video. It's particularly bad with the Apple Keynotes. I have Apple TV connected via an HDMI cable to a Sony 1010 HD receiver, which is linked via HDMI to a Bravia 52" TV. I've tried direct hookup to the HDMI port on the TV and wound up with the same syncing problems. The receiver has a sync adjustment that I can use to get it close to sync but it's a pain and you have to stop watching the movie to **** around with it. Any suggestions?

I had an audio sync issue over HDMI when I had Settings / Audio & Video / Dolby Digital Out set to 'On' (which I had to do to get my receiver to detect the Dolby Digital Optical signal). Turning this setting to 'Auto' or off fixed my sync issues when using the HDMI audio stream.

FCP Sound Syncing Question

Hey Everyone,
I have an audio syncing question for you. Any help would be greatly appreciated!
I am cutting in FCP. I logged and captured my footage and with timecode breaks, etc. the tape was cut up, and I was left with eight files, let's call them Footage1-Footage8. I have completed my cut of the piece using the in-camera audio that was linked to the video on the DV tape that I imported. Our sound guy in the field used a DAT recorder to record the production audio and apparently captured the timecode to the audio files, so that it matches the video (i.e. the DAT recorder and our cameras - DVX-100s had synced timecode during the shoot). The DVD he gave me has 20 audio files as .wav, let's call them Audio1-Audio20. My question is, now that I have finished my cut, I would like to replace the current audio tracks with the production audio. How can I sync the audio with the video and replace it in what I've cut. Or perhaps I can't, in which case - how can I sync them up and THEN cut, but I'd really rather have to not do that, lol!
Thanks for your advice!

Sorry about the long winded post, though.
I guess my real question, summarized is - is there a way to sync separately recorded production audio (that has timecode) with the footage that I shot (that has the same timecode as the audio, but also has in camera audio that accompanies the video track - I would imagine I can just "cut" the extra audio tracks, however).
I'm at my bay trying to figure this out, and I've got nothing, and the people I work for don't want to spring for that bwf2xml program you were talking about What's the emote for pulling one's hair out?

Imovie 9.0.2 sound sync - is it to do with the export route

Like scores of others in these forums I've been grappling with the (appalling) failure of iMovie 9 to synchronise sound and vision. The 9.0.2 update did not solve anything for me.
I have founds one solution, though not sure how good a one. Instead of using "export using Quicktime" - which produces an out-of-sync mov file - I find that "export movie" gives me an m4v file that does appear to be in sync.
I've no idea what light this might throw on the whole sorry saga. 2 questions for me at this stage:
1 - am I losing quality or creating other problems by saving as an m4v?
2 - how do I go about compressing my m4v (it's 30 times the size of the equivalent mov file)?

DV
4 minute and 34 minute projects - length seems to make no difference. Also they are out of sync from the outset - not just by the end as some users have found.

Sound Syncing Strangely

Hello friends.
I am currently making a film using Flash 8 Pro. In one of my
scenes, I placed and synced the sound exactly as I did in all the
others. I set the sound to Event, because I'm using a Virtual
Camera. When I exported the video, the sound was not properly
synced (all sounds happened much sooner than they were supposed
to). I tried moving the sound's keyframes so they could occur later
(I thought that this problem was a result of visual lag), but the
sound occurred at the exact same time it did before I moved it. I
tried restarting Flash, saving and re-exporting, deleting the sound
files and re-importing them, moving them to a different layer, and
copying everything to a brand new file, but nothing has worked.
This problem is only occurring in one scene file, very
strange.
Thanks.
- Wright

Make sure your default easy setup frame rate matches your camera material. That can supposedly cause this problem. Open one of the audio files in fcp and check the frame rate and see if it matches the video.

IOS 6 notification and sound sync

I am having an issue where the banner notification and sound are not in sync. So the banner will flash on the top of the screen and then I will hear the notification tone. This can be very annoying when the phone is in my pocket - I will look t it when I hear the notification tone but will have missed the banner notification so often times don't know what the notification was for. Any assistance would be greatly appreciated. I am running iOS 6 on my 4s. Thanks.

NattyNoodle
Re: IOS 6 Notification sound not working!! Sep 28, 2012 11:25 AM (in response to keith-gauci)
I've had exactly the same problem! Also the silent button on the side isnt working either. Calls seem to be ok, but emails sms facebook, none of those sounds work. Have you found a solution?
No I haven't. The difference is that my silent button is working and even sound when receving and email or an sms's. My issue is the sound of the notification of the applications. For example facebook, F1Live24 ..

Video-sound sync problem

I have the problem that the Canon EOS 5D Mark II does not sync video and audio from the start. The sound comes before the event. I have to adjust the audio channel by moving it forward when I edit in Premiere Pro CS5. Is it a bug in the software for the camera? I have firmware version 2.0.7. The result is the same whether I use the built-in microphone or a wireless connection. Maybe not a problem with Premiere. Have more than I have had this problem?
Wiew: http://vimeo.com/13888863

What are the video settings, and what is your project preset?
Type: MPEG Movie
File Size: 1,0 GB
Image Size: 1920 x 1080
Pixel Depth: 32
Frame Rate: 25,00
Source Audio Format: 48000 Hz - compressed - Stereo
Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
Total Duration: 00:03:04:18
Average Data Rate: 5,6 MB / second
Pixel Aspect Ratio: 1,0
Video Display format: Timecode
Audio Display format: Milliseconds (but even Audio Samples with the same resutat)
Capture Format: HDV
Preset Desciption: For editing most DSLR Formats (like the Canon EOS Movie Full HD series) recorded in 1920x1080 square pixels (non-anamorphic).
16:9 Progressive HD video at 25 frames per second. 48 kHz audio.
General
Editing mode: DSLR
Timebase: 25,00fps
Video Settings
Frame size: 1920h 1080v (1,0000)
Frame rate: 25,00 frames/second
Pixel Aspect Ratio: Square Pixels (1.0)
Fields: No Fields (Progressive Scan)
Audio Settings
Sample rate: 48000 samples/second
Default Sequence
Total video tracks: 3
Master track type: Stereo
Mono tracks: 0
Stereo tracks: 3
5.1 tracks: 0
Submix mono tracks: 0
Submix stereo tracks: 0
Submix 5.1 tracks: 0
Have you tried dragging and dropping a file on the new item icon in CS5?
No

Sound sync issue in slideshow in iDVD...

I have been making a DVD from a recent holiday to Mexico. Got two Movies on there from dolphin swims, and then two slideshows. One just to look through manually, and one put with music.
The slideshow with music lasts around 12 minutes, and slides are fit to audio (3 tracks). There are 3 small digital camera movies on there, two at the start, very short, and one 2/3 through which is about 1 minute long. The two at the start play fine, with audio in sync. Audio is in sync right up till 15 seconds through the third movie, but then it cuts all audio, no music or sound.
After the movie end sound comes back on (continuing from where it cut). 5 pictures from the end it then jumps and catches up with itself.
Any idea's?
I should mention this is using a disc image i have created and mounted and not from an actual burnt DVD.

I'm just curious if you tried making a disc image prior to burning this presentation to DVD-R and if so, did you use apple's dvd player app to test playback prior to burning? I recommend lowering the burn speed to 4x or lower and using quality media like Verbatim or Maxell while troubleshooting this issue.
Not sure I have a solution here other than to try the same slideshow at the start of the of the DVD or at the end and avoid placing it in the middle since it calls for user interaction for all manually advanced slides.
Hope this suggestion helps but if not just come on back.

Sound Sync issues

Hi there. Can anyone help me with this. I've recently captured footage from DVCPRO HD tapes (1080i25p) to the DVCPRO HD format (1080 25i) in FCP through my KONA 3. The footage i have of an interview seems to be out of synch with the sound...not sure by how much, but after doing what i'll explain next, i'm betting it's about 4 frames!
I wasn't too concerned as it's something i've noticed before and thought that i could have made a mistake with the capture (the KONA 3 is new) and i'm fairly happy to re-sync the sound if needs be. The main problem is that i have now opened an old project (DV PAL) that needs a number of sequences printed to DV tape for my client. Upon opening my project it seems that all the sync to the interviews in the project are now 4 frames out!! Very annoying!
I can't find anything that could be wrong here within my settings and can't quite get to grips with it but suffice to say, i could do with a pretty quick solution!
I don't have my RAID turned on with my other project and am just running this from a firewire 800 drive. The project has not been touched since about a week ago when everything was fine!! I've tried deleting all my render files for the project but this hasn't helped either.
If anyone can help with this i'd really appreciate it
thanks
Alex

Thanks Ken, I've managed to resolve the issue to a certain extent now. There did seem to be some sort of lag introduced by the Kona even though i wasn't directing sound through it or even had anything plugged in to the sound out connectors on the breakout box. I disconnected the HDCAM deck i have in the suite from the breakout box and things are now back in sync. A solution, but certainly would be interested to know why as I'd like to think i'd be able to cut stuff even if a deck is connected to my breakout box.

Problems with sound sync for HDV import (MPEG file)

I've imported a one hour tape from my Sony HDR-HC3 (HDV import), and within a few minutes the sound and video get out of sync when I play it. I have elements v4 and also tried version 8 (trial) which was better but still a second out of sync vs 4-5 seconds for v4. The imported files for both versions both play perfectly in Windows Media player with no sync problems.
I'm running on Windows 7 64 bit with 4GB ram and a 4 core AMD processor which isn't struggling. In searching the web I've seen some old workaround solutions for similar problems which involved deinstalling quicktime, installing streamclip and a quicktime alternative and then converting the files imported by Elements. I am hoping there is a more straightforward solution within Elements which avoids having to go through this workaround.
Has anyone had this problem and solved it?
Thanks
Andrew

Thanks for the pointer Neale. I tried converting the file with Streamclip (quite slow - about 1/3 play speed) and noticed there were some errors reported near the beginning. I reimported the HDV into Premiere Elements 4 but this time in a number of smaller sections. I think it may have been related to those errors because when I cut to a later section the sound was in back in sync where it previously had been out of sync. This seems to have solved it for me. If I get some time to have a play with the converting solution I'll post the results back here, but for now I can catch up with the video editing which has fallen behind a bit.
Thanks again.
Andrew

Weird Sound sync issue.

hi!
I am currently editing a concert in CS3, and have encountered some strange audio sync problems.
I used seven cameras in the production (two dvx, one XM2, and the rest was HDV cameras from Sony)
One of the DVX cameras supplies the sound that shall be used in the final product and I have this camera on V1 in CS3. The problem occurs when I try to sync either one of the HDV cameras or the XM2 to the V1 Audio (dvx). The sound on each source is in sync with the Video, but when i try to sync the video from let's say one hdv camera to the sound from the dvx it slowly get's out of sync. I also tried to sync the other dvx video with the V1 dvx Audio, and no sync problems occured. Only when I use the hdv or xm2 video.
All of the dv tapes from all cameras was captured in CS3 with the DVX, so I guess this could be the source of the problem.

well. I managed to fix the problem.
Captured with Windows Movie Maker instead!! And imported the video to cs3.

IPod w/video with sound synced to vid problem

got my ipod/ video on Friday night. frustrated, I finally was able to get my own video to play on the ipod.
problem:
the video and the sound are out of sync. the video plays about a quarter second faster than the sound so it feels like I'm watching my family in a foriegn movie.
am I encoding something wrong?!
help
ipod with video Windows XP

found answer elsewhere

Sound sync errs in Encore (PP4.0.0)

Similar Messages

Maybe you are looking for