Sound system completely not working

Dear Sir,
I have a HP Pavilion g6 Notebook PC running Windows 8 Single Language 64-bit,
Serial no: [Personal Information Removed]. All of a suuden a few days back when I opened the system I found sound system not functioning at all. I cannot hear any sound from either the speakers or the head set. I even tried recovering my sysem using recovery CDs, still I am not geting back the sound.
Could u please help me.
Thank you,
Parvathy

Hello EMANAHMED,
I see that you are having problems with the sound on your HP computer. I have some suggestions that may help with this issue.
Here is a link to some sound troubleshooting steps for Windows 8 computers. If you are still having problems with the sound and you have ran a recovery to the factory settings of the computer, I would suggest contacting HP support for repair options.
Here is a link to the contact options for HP support.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Similar Messages

My sound system does not work AFTER installing pc to tv wireless connection

my sound system does not work after installing hp pc to tv wireles device when I am using lap top for other purposes.

Hi,
You don’t install VS2010 on the client PC, then where did the Form Invoice not work? When you run it from another version of VS? Or when you run the application with application.exe?
Based on your description, one form works well, another form does not. I assume that two forms are in two different projects, then please check the .Net Framework used by the two projects. If they are different, you can use the
one used by the Form contact for Form Invoice.
Because this issue is a project issue, I recommend you to consult it on some application forum such as Windows Forms General forum for better support.
VS General Question forum mainly discusses
the usage of Visual Studio IDE such as
WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help
System and Visual Studio Editor.
Thanks,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

My sound system is not working after my last updates on my imac,what shall i do to get fixed?

Hello any body who can help me out here?
My sound system is not working on my imac after the last updates,
WHAT SHALL I DO FOR????

apollos211,
You marked this as solved, so chances are no one else will respond.
You can try going Applications>utilities>audio MIDI set up, output tab and check to see if built in is selected.
Also check in system preferences>sound >output and see what is selected there.
If you look in the headphone port and see a red light (this means it is in digital mode), try taking a set off headphones and plugging them in and out several times also wiggle them around gently. There is a micro switch that sometimes gets stuck.
Hope this helps, if still no joy try reposting so that more contributers might check it, as once checked as solved it reduces the number of people checking.
All the best

External sound system is not working

Hi, the sound system is not working for my MacBook. It is working perfectly for my PC, however, when I plug it into my mac, every sound playing is being paused (e.g. iTunes are being paused on the second playing). What could be the issue?

That is what I am asking. It just does not make since that the Macbooks audio out/headphone plug works on some systems and not on that particular system.
If the system you are trying to use does not plug into the AC wall socket to get power then that could be one of the problems. But I believe you have try to tell us that is does plug into the AC wall plug and then plugs into the Macbooks headphone plug.
Is it possible that the Jack on the sound system you are experiencing problems with is bad?
Does the sound actually pause or just cut sound in/out similar to how a loose speaker wire might sound like?
Have you tried using this sound system on a different computer to see if the problem still exist?

I have hp laptop from last 2 days sound system is not working

hi my laptop sound system is not working i cant hear the music

Go to the link below.Enter your Product Number as listed on Service Tag attached to bottom of notebook (may be under battery). You can also get the Product Number by pressing Fn + Esc key. After entering PN, click Next ,then choose Software & Drivers.On the next page use the dropdown to select your OS (probably Windows 7 64bit). A list will populate with drivers. Download & install the latest Audio driver.
http://h10025.www1.hp.com/ewfrf/wc/siteHome?cc=us&lc=en
```````````````````````````````````````
If still no sound,try a hard reset, works sometimes.Disconnect all external devices first.
1-remove power cord and battery
2-press power button for 30 seconds
3-reinstall only power cord for first startup.
4-power on
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Sound system is not working. Stand option no more available.

I have HP pavillion dv 1000. After formatting the laptop, sound system is not working. I can't hear any video sound; stand by and hibernate options are no more available. Please help me.
This question was solved.
View Solution.

Nazia2011 wrote:
I have HP pavillion dv 1000. After formatting the laptop, sound system is not working. I can't hear any video sound; stand by and hibernate options are no more available. Please help me.
Well actually, if you really performed the impossible as you stated "formatted the laptop" how could anything work?
One can format and partition a hard disk which is a component of a laptop. Without reinstallation of an OS how can anything work?
Please restate in clearer terms what you did to which component to achieve nothing working.
Identify your notebook in more concise terms than just the series number from the front. Turn your notebook over and look at the tag. Post all but the serial number from the barcoded tag.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

The Open Sound System is not working

I have installed and configured OSS following the Wiki, but I still get no sound. Any idea of what problem this is?
Thanks in advance.
Last edited by R_Rios (2009-09-22 21:26:31)

I have also have a problem with OSS4 on KDE 4.3. I have installed installed and got the sound but the volume output is too low even When I set it to max
> ossmix
Selected mixer 0/High Definition Audio ALC883
Known controls are:
jack.green.mode <front|rear|center/LFE|side|pcm4|input> (currently front)
jack.green [<leftvol>:<rightvol>] (currently 29.9:29.9 dB)
jack.green.mute ON|OFF (currently OFF)
jack.pink.mode <front|rear|center/LFE|side|pcm4|input> (currently front)
jack.pink [<leftvol>:<rightvol>] (currently 29.9:29.9 dB)
jack.pink.mute ON|OFF (currently OFF)
jack.fp-pink.mode <front|rear|center/LFE|side|pcm4|input> (currently front)
jack.fp-pink [<leftvol>:<rightvol>] (currently 29.9:29.9 dB)
jack.fp-pink.mute ON|OFF (currently OFF)
jack.blue.mode <front|rear|center/LFE|side|pcm4|input> (currently input)
jack.blue [<leftvol>:<rightvol>] (currently 29.9:29.9 dB)
jack.blue.mute ON|OFF (currently OFF)
jack.fp-green.mode <front|rear|center/LFE|side|pcm4|input> (currently front)
jack.fp-green [<leftvol>:<rightvol>] (currently 29.9:29.9 dB)
jack.fp-green.mute ON|OFF (currently OFF)
record.mix.mute.mic1 ON|OFF (currently OFF)
record.mix.mute.fp-mic1 ON|OFF (currently OFF)
record.mix.mute.linein1 ON|OFF (currently OFF)
record.mix.mute.fp-headphone1 ON|OFF (currently OFF)
record.mix.mute.green1 ON|OFF (currently OFF)
record.mix.mute.input-mix1 ON|OFF (currently OFF)
record.mix1 [<leftvol>:<rightvol>] (currently 46.4:46.4 dB)
record.mix.mute.mic2 ON|OFF (currently OFF)
record.mix.mute.fp-mic2 ON|OFF (currently OFF)
record.mix.mute.linein2 ON|OFF (currently OFF)
record.mix.mute.fp-headphone2 ON|OFF (currently OFF)
record.mix.mute.green2 ON|OFF (currently OFF)
record.mix.mute.input-mix2 ON|OFF (currently OFF)
record.mix2 [<leftvol>:<rightvol>] (currently 46.4:46.4 dB)
misc.mic [<leftvol>:<rightvol>] (currently 46.4:46.4 dB)
misc.fp-mic [<leftvol>:<rightvol>] (currently 46.4:46.4 dB)
misc.linein [<leftvol>:<rightvol>] (currently 46.4:46.4 dB)
misc.fp-headphone [<leftvol>:<rightvol>] (currently 46.4:46.4 dB)
misc.green [<leftvol>:<rightvol>] (currently 46.4:46.4 dB)
misc.input-mix <mic|fp-mic|linein> (currently mic)
misc.front-mute ON|OFF (currently OFF)
misc.input-mix-mute1 ON|OFF (currently OFF)
misc.front1 [<leftvol>:<rightvol>] (currently 37.4:37.4 dB)
misc.front2 <front|input-mix> (currently front)
misc.rear-mute ON|OFF (currently OFF)
misc.input-mix-mute2 ON|OFF (currently OFF)
misc.rear1 [<leftvol>:<rightvol>] (currently 46.4:46.4 dB)
misc.rear2 <rear|input-mix> (currently rear)
misc.center/lfe-mute ON|OFF (currently OFF)
misc.input-mix-mute3 ON|OFF (currently OFF)
misc.center/lfe1 [<leftvol>:<rightvol>] (currently 46.4:46.4 dB)
misc.center/lfe2 <center/LFE|input-mix> (currently center/LFE)
misc.side-mute ON|OFF (currently OFF)
misc.input-mix-mute4 ON|OFF (currently OFF)
misc.side1 [<leftvol>:<rightvol>] (currently 46.4:46.4 dB)
misc.side2 <side|input-mix> (currently side)
misc.pcm4-mute ON|OFF (currently OFF)
misc.input-mix-mute5 ON|OFF (currently OFF)
misc.pcm41 [<leftvol>:<rightvol>] (currently 46.4:46.4 dB)
misc.pcm42 <pcm4|input-mix> (currently pcm4)
vmix0-enable ON|OFF (currently ON)
vmix0-rate <decimal value> (currently 48000) (Read-only)
vmix0-channels <Stereo|Multich> (currently Stereo)
vmix0-src <Fast|High|OFF> (currently Fast)
vmix0-outvol <monovol> (currently 25.0 dB)
vmix0-invol <monovol> (currently 25.0 dB)
vmix0.pcm8 [<leftvol>:<rightvol>] (currently 25.0:25.0 dB) ("knotify4")
vmix0.pcm9 [<leftvol>:<rightvol>] (currently 25.0:25.0 dB)
vmix0.pcm10 [<leftvol>:<rightvol>] (currently 25.0:25.0 dB)
vmix0.pcm11 [<leftvol>:<rightvol>] (currently 25.0:25.0 dB)
How to Increase volume to max level?
[edit]
Some extra info
> ossinfo
Version info: OSS 4.2 (b 2000/200909090620) (0x00040100) GPL
Platform: Linux/x86_64 2.6.30-ARCH #1 SMP PREEMPT Wed Sep 9 14:16:44 CEST 2009 (moody)
Number of audio devices: 8
Number of audio engines: 12
Number of MIDI devices: 0
Number of mixer devices: 1
Device objects
0: osscore0 OSS core services
1: oss_hdaudio0 Intel HD Audio interrupts=13214547 (13381872)
HD Audio controller Intel HD Audio
Vendor ID 0x808627d8
Subvendor ID 0x1458a002
Codec 2: ALC883 (0x10ec0883/0x1458c603)
2: oss_usb0 USB audio core services
MIDI devices (/dev/midi*)
Mixer devices
0: High Definition Audio ALC883 (Mixer 0 of device object 1)
Audio devices
HD Audio play front /dev/oss/oss_hdaudio0/pcm0 (device index 0)
HD Audio play rear /dev/oss/oss_hdaudio0/pcm1 (device index 1)
HD Audio play center/LFE /dev/oss/oss_hdaudio0/pcm2 (device index 2)
HD Audio play side /dev/oss/oss_hdaudio0/pcm3 (device index 3)
HD Audio play pcm4 /dev/oss/oss_hdaudio0/pcm4 (device index 4)
HD Audio play spdif-out /dev/oss/oss_hdaudio0/spdout0 (device index 5)
HD Audio rec mix /dev/oss/oss_hdaudio0/pcmin0 (device index 6)
HD Audio rec mix /dev/oss/oss_hdaudio0/pcmin1 (device index 7)
Nodes
/dev/dsp -> /dev/oss/oss_hdaudio0/pcm0
/dev/dsp_in -> /dev/oss/oss_hdaudio0/pcm0
/dev/dsp_out -> /dev/oss/oss_hdaudio0/pcm0
/dev/dsp_ac3 -> /dev/oss/oss_hdaudio0/spdout0
/dev/dsp_mmap -> /dev/oss/oss_hdaudio0/pcm0
/dev/dsp_multich -> /dev/oss/oss_hdaudio0/pcm0
I also ran "osstest" command and I only twice and rest there is no sound
No sound
/dev/oss/oss_hdaudio0/pcm1 (audio engine 1): HD Audio play rear
- Performing audio playback test...
<left> OK <right> OK <stereo> OK <measured srate 47995.00 Hz (-0.01%)>
/dev/oss/oss_hdaudio0/pcm2 (audio engine 2): HD Audio play center/LFE
- Performing audio playback test...
<left> OK <right> OK <stereo> OK <measured srate 47993.00 Hz (-0.01%)>
/dev/oss/oss_hdaudio0/pcm3 (audio engine 3): HD Audio play side
- Performing audio playback test...
<left> OK <right> OK <stereo> OK <measured srate 47993.00 Hz (-0.01%)>
/dev/oss/oss_hdaudio0/pcm4 (audio engine 4): HD Audio play pcm4
- Performing audio playback test...
/dev/oss/oss_hdaudio0/pcmin0 (audio engine 6): HD Audio rec mix
- Skipping input only device
/dev/oss/oss_hdaudio0/pcmin1 (audio engine 7): HD Audio rec mix
- Skipping input only device
I hear the Sound
dev/oss/oss_hdaudio0/pcm0 (audio engine 0): HD Audio play front
Note! Device is in use (by PID 0/VMIX) but will try anyway
- Performing audio playback test...
<left> OK <right> OK <stereo> OK <measured srate 47980.00 Hz (-0.04%)>
/dev/oss/oss_hdaudio0/spdout0 (audio engine 5): HD Audio play spdif-out
- Performing audio playback test...
<left> OK <right> OK <stereo> OK <measured srate 47993.00 Hz (-0.01%)>
Please help
Last edited by cool (2009-09-23 12:07:12)

Sound system is not working

My mic,front speaker,back speaker,audio jack nothing is working. I can't listen others talking with me and there are not able to listen me

Did you consider the Nokia Software Recovery Tool on a Windows computer already?

System.out not working on eclipse

Greetings...
I am no longer a newbie on Java, but I have been facing an issue lately that I have been unable to resolve myself, even though it seems to be something so silly.
I have been using eclipse for development, and by developing a simple "Just to practice" code I have found myself unable to use System class or any of its methods at a certain point. See the code below:
package one;
import java.util.Scanner;
public ClassOne {
public static void main (String args[]){
Scanner reader = new Scanner(System.in); /*Works just fine here*/
int x = 0;
System.out.println("Type in the number of objects expected"); /*Does not work at all, like if System was something I could not use at all. Not an identifier */
Scanner readertwo = new Scanner(System.in); /*System does not work here either*/
}Even if I rewrite the code after that, by erasing the import statement and all other System references in the code, System does not work again.
If anybody has ever faced the same issue and knows what I am doing wrong and what I can do to fix it, I'd really be grateful.
Thanks to all, and happy 2009.
Santana T

Santana_Thiago wrote:
It works on NetBeans.
On eclipse I get the following error:
ERROR: JDWP Unable to get JNI 1.2 Environment, jvm->GetEnv() return code = -2+
*JDWP exit error AGENT_ERROR_NO_JNI_ENV(183): [../../../src/share/back/util.c:820]*+
The funniest thing is that if copy and paste the code from somewhere else into eclipse it works. What a drag!!!!
Thank you.
Santana TNever seen that error but it sounds to me that your Eclipse installation is screwed up!

SB04100 Sound Blaster Card not working after computer rebuild

=SB0400 Sound Blaster Card not working after computer rebuildZ I did a full disk format and reinstall for a friend on a Dimension 3000, running XP SP3. There is no sound at all. Speakers are good, tested on another system. Model number on the back of the sound card is SB0400, so I assume this is an older 24 bit PCI SoundBlaster card. Although I reinstalled all drivers from Dell, I found no drivers for this. The Creative site has no listing for this model.
Computer does not seem to recognize the card. Have not opened the box yet but I assume if I were to remove and then reinstall the card it would be recognized (?) I then have to find an SB0400 driver.
Does anyone know where I can find an SB0400 driver ? Does the strategy of pulling and reinstalling the card make sense ? (I have really avoided tampering with any of the hardware on this box -- since it is not mine.)

Re: SB0400 Sound Blaster Card not working after computer rebuild? Thanks much for your response. Problem solved for now. I removed the board and then reinserted it, after which I was able to download the drivers directly. Some of my difficulty with this whole process has been ) I didn't know there was no working speaker in the computer and 2) I apparently misunderstood the BIOS settings for this. I re-set it up as an add-on board during the troubleshooting process. After loading the driver, I went back to the original setting (don't recall what it was but it was for integrated sound). The setting for integrated sound works fine, with external speakers and the new 24 bit driver. Still some noise (popping and static) but this board shares the bus with 2 other cards one of which is a wireless network card. May be a PCI latency issue but I'm reluctant to change that because the network card is a bit shaky anyway.
Everything works for now -- I'll be glad to get this particular computer out of my house !

I cannot get any sound..it says my sound card is not working properly...how do i fix this.

HP PC 2000 notebook, windows 7 operating system
can't get any sound..says the sound card is not working..how can i fix this...

You need to contact Adobe for you billing problem this is a user four not adobe customer support.
For your Photoshop Problems this user community may be helpful.
Supply pertinent information for quicker answers
The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
Adobe product and version number
Operating system and version number
The full text of any error message(s)
What you were doing when the problem occurred
Screenshots of the problem
Computer hardware, such as CPU; GPU; amount of RAM; etc.

Security and privacy system preferences not working after Lion install. What to do?

Security and privacy system preference not working after Lion install. Not sure if it happen with Lion installer or after updating. What to do?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” (without the quotes) and press return. You should then get a new line ending in a dollar sign.
Step 1
Copy or drag — do not type — the line below into the Terminal window, then press return:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you synchronize with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

A device attached to your system is not working!!

I am trying to connect to Oracle8i Personal Edition through a JDK1.2.1 application using the classes111.zip or classes12.zip package. After running the application I get this error message: UnsatisfiedLinkError: ocijdbc8: A device attached to your system is not working. I you have any idea what is happening, please answer inmediately.

You are using the oci8 driver so your program is looking for the native mode Oracle Client software. Install the Oracle Client software or use the thin driver.

Iphone 5.1 update messed up sound. Audio not working in youtube, music and video apps. Phone is not muted! nor is volume turned down

Iphone 5.1 update messed up sound. Audio not working in youtube, music and video apps. Phone is not muted! nor is volume turned down

Basics from the User Guide are restart, reset, restore from backup, restore as NEW. Unless you've tried ALL of these, you're not done troubleshooting.

HT1212 my phone touch system has been destroyed i have to make a backup in laptop but when i m connecting ma device to itunes of ma laptop so its saying your device have a paascode like ma phone touch system is not working how should i type ma pass word ?

my phone touch system has been destroyed i have to make a backup in laptop but when i m connecting ma device to itunes of ma laptop so its saying your device have a paascode like ma phone touch system is not working how should i type ma pass word ??? is there any way to open ma device from laptop nd sync my data , contacts etc to ma laptop ... i have to make my phone repair then...please help with thiss...

Sorry No, if your screen is broken, then you won't be able to unlock your phone.
You do backup your phone on a regular basis right?

Sound system completely not working

Similar Messages

Maybe you are looking for