Sound through HDMI does not work on eeebox eb1501p

So, as the topic states I can't get sound to work through HDMI.
aplay -l says:
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: ALC662 rev1 Digital [ALC662 rev1 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 7: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 8: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 9: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
When trying to play a wav file:
aplay -D plughw:1,3 /usr/share/sounds/alsa/Front_Center.wav
Playing WAVE '/usr/share/sounds/alsa/Front_Center.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Mono
No errors, but no sound either, and this is true on all nvidia devices listed in aplay -l.
So what do I do next?
EDIT: The channels are all unmuted in alsamixer.
Last edited by jarrett (2011-12-17 23:20:26)

On my laptop, I have to add "options snd-hda-intel probe_mask=0xffff,0xff2" to a modprobe.d conf file. You can try that.
sudo su
echo "options snd-hda-intel probe_mask=0xffff,0xff2" >> /etc/modprobe.d/sound.conf
exit
After that, restart and hopefully it will work.
Last edited by vbim0nk (2011-12-17 14:52:20)

Similar Messages

The two finger cycle through apps does not work?

Hello,
I don'nt know what is wrong, but it seems that the two finger gesture allowing to cycle through apps does not work for me. I am using a standard mac Bluetooth mouse.
Can anyone help me with this?
Thank you
Sebastien Dion
from Quebec city, Canada

Download a free app. It reauthorizes your device for use of your apple id.

Hdmi does not work

I am trying to hook up a logitech revue unit to my hitachi hdtv. It requires an hdmi input. When we first got fios, (qip 6200 p2 stb), no amount of fiddling with cables, settings and what not got hdmi to work. After much frustration, etc. said to hell with it and went with component output. Worked fine. Now I need hdmi. TV keeps saying "no video signal. " Tried all three hdmi tv ports and tried all tv input option settings. No go. It did come on intermittently , but only after an un-acceptable delay. Yes! I did disconnect the component outputs before trying the HDMI. have rebooted and resetted the world to no avail. According to the various forums, this Motorola hdmi fiasco has been ongoing for almost three years. I want a fix, ASAP. Or at least a reliable date for a fix. BTW I am an EE+ computer science engineer. I've tried the entire customer service 101 stuff so please don't tell me to change my cables.
Boris {edited for privacy}

As I said in my posting, I am a professional. I would not have bought the unit had I not seen the logitech listing of compatible STB. Also, be assured that I have hooked it up correctly. There does not appear to be any way to do it wrong.
1. STB hdmi OUT to Revue hdmi IN
2. Revue HDMI OUT to TV HDMI IN Tried all three ports. NO Go.
How pray tell could I have screwed that up?
Read my post please. Went through the cable **bleep**
Revue HDMI out to TV works okay I get a signal and can start the initialization procedure. I have a wifi problem which
I may fix by opting ethernet if high gain antenna does not fix. As I said, I am a professional..i have read thoroughly the Actiontec (router), logitech and Verizon Forums. This STB misbehavior is endemic to to the benighted Motorola STB and has been endemic from the start. Obviously, Logitec testing of the Motorola STB was inadequate. My original question
stands, since the MOtorola STB does not work on HDMI. Please confine your reply to a substantive response to my question.
1. When will the Verizon STB be made to provide fully functional HDMI outputs.
if not that,
2. When will Verizon provide a fully functional STB?
BorisBeizer
MSEE ( Uof P 1963) PhD Computer science (ditto, 1967).

HT5012 Hdmi does not work on my iPad or iPhone since doing the update 7.0.2

iPad and iPhone the hdmi out does not work have audio but no picture since I update to 7.0.1 or 7.0.2 is still does not work it did before

Try resetting your wireless router by unplugging the router from the power for about 30 seconds then plugging it back in.

Loading flash through ajax does not work in IE 6.

Hi all,
I am having some problems on a site I'm developing. When I
load a video from youtube, etc, and do so dynamically through ajax,
it does not work on IE 6. Mind you it does work on all other
browsers. This problem happens with multiple copies of IE 6 so it
is reproducible. Not sure if there are any web devs here but any
help would be greatly appreciated.

Well, this probably belongs over in the Flash forum. That's
where the developer questions go.. It's surely a matter of the way
the code is written (or possibly the paths to the different
components. There are security restrictions on certain types of
loading that may also come into play. Hard to tell without more
detail.

Smartview v11.1.1.3 drill through reports does not work in grids?

Hi,
I'm using v11.1.1.3 and know there is a drill through function to FDM from Smartview grids. I've tried but it does not work in the grids, only works in the forms. However, I'm able to drill through to FDM from workspace grids. Does anyone encounters the same?? Appreciate any kinds advices. Thanks!

Are you certian that the report is showing an input level cell? Often reports are designed to run at Total dimension members, i.e. <Entity Curr Total> which you can not drill into.

Hdmi does not work since updating to jelly bean

Since updating my at305-16 to JB hdmi will not work . I go into settings and select hdmi out but get no signal on tv.

I think it might be a JB driver issue. I was having the same problem connecting it to my LCD, but when I switched to my plasma it works. The LCD is 1080P Auto the plasma is 720P auto. But fropping my LCD to 7120P didn't help. I don;t know if you have two TVs to try on, but it couldn't hurt.

HDMI does not work with Mini iPad

I bought the new HDMI x lighting adapter so I could play video downloaded to my Mini Ipad on my TV. It does not switch over automatically to the TV although my new iPad Air does work fine with same adapter. I have looked for a setting on the Mini that I may have missed but all is same as on iPad Air. Does anyone have any suggestions? I have found similar questions on community but no firm answer as to the possible solution.

Hi there LaureynR,
You should still be able to do this. I would recommend taking a look at the article below for troubleshooting steps.
Apple computers: Troubleshooting issues with video on internal or external displays
-Griff

Sound and Vibrate does not work at same time

Hi Support,
I have recently purchased BlackBerry Z3.
It does not support Sound & Vibrate at same time.
In Normal mode, I have enabled Sound and Vibrate but it does only give sound for incoming calls/messages.
(does not vibrate)
In Vibrate Mode, it does only vibrate.
This is the first time I am using Blackberry and I am annoyed with the basic feature not working.
Please respond.
Regards,
Sunil.
Solved!
Go to Solution.

I'm glad things are back to normal for you.
Cheers.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

Sound and ioslave does not work

Hi
My system just upgraded to arch without me intentioning and this must explain the problem
I just installed kde a few mins back. Unfortunately no sounfd plays.I put JACK,esd and kdm in my deamons list and rebooted. Still no sound plays. I disabled the KDE sound system but no avail. Kmix shows nothing.
So I downloaded alsa utils and ran alsaconf. But still kmix does not recognise a mixer. Aplay returns:aplay main 550: audio open error: device or resource busy
how do I solve this?
Thansk

I'm glad things are back to normal for you.
Cheers.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

Hi, I am trying to verify my Acrobat XI Pro and the serial number I was given through email does not work.

The Acrobat manager does not accept letter formation while entering the serial number. Where my serial number does contain letters and numbers. How do I enter my verified code ?

Was this a purchase from Adobe?

Texting through messages does not work

I am unable to send any text messages from the iPad2.

Check under settings->messages at top " learn more." You cannot send text messages to anyone who
does not have ios5 on their iphone. So if they don't have an iphone you cannot send them a message.

Xbox 360 Vga Kit Sound through Line-in not working.

So I spend time in windows from time to time, but for conveinence I would like to use my xbox 360 in both my Mac and Windows partitions. I have the Mac side of things working beautifully with a little program called Line-in. Under windows though, through all my searching and fiddling, I cannot get any sound to go along with my picture.
Sound is the only issue here, and I know it's not hardware related since it works in Mac OS X.
So far what I have tried-
--Making sure connections are nice and snug.
--Under audio properties in windows, making sure line-in audio is up.
--For the heck of it, trying it using mic settings with audio and Mic Boost on
--Looked for a program similiar to Line-in for Mac OS X, but could find nothing for windows.
I'm pretty stumped here. Now I'm at the point where I'm doubting a boot camp compatibility issue. I have a Core Duo from when the macbook pros came onto the market, the ones with the regrettably gimped video cards (Still mad apple underclocked the card without ever telling me). My audio is a sigmatel card. My drivers are up to date as far as I know. Any ideas what I can do to get some audio?
--Detail that may matter, I have sound coming out through a set of usb speakers. All of my other windows audio is fine.
QUICK UPDATE: I checked the sigmatel user panel, and it not only said that my line-in was ok, but that a device was connected. This only makes me wonder more, what detail I am missing here.
Message was edited by: mike1128

The OP reported their line-in input "broke" after upgrading to Leopard, however my MBP stopped recognising input from the mic on my headset a few weeks ago when I was still running Tiger. This might possibly indicate that the change in OS X's handling of the line-in input was present in a Tiger update, but I can't remember the exact correlation between the dates of my last update and this problem. All the same, I'm pretty annoyed that a headset that worked perfectly for several months is now suddenly unusable without a USB adapter.
Prior to stumbling across this thread, I visited two Apple stores, who both tested with an output from an iPod and told me that the input was working fine, leading me to buy a brand-new headset (even though I'd tested other working headsets without success) which, naturally, produced the same results.
Seems to me that the hardware is fully capable of processing a mic input through the line-in port, as it's never had any problems with any unpowered source until recently, so Apple must surely be able to undo the change they made?

Windows 10 - No sound and mediaplayer does not work after upgrade

Hi !I can't get the sound to work after upgrade to win 10, - and windows mediaplayer will not openmp3's -- I get video on the VLC - but no sound... If anybody can help me, - please post a direct link to the driver I have toreinstall.. Thanks CarstenNorway

Thanks for the answer- but I mangage to solve the problem my self this time... I just did go to controlpanel - and clicked right button on the mouse - and updated both sound drivers thatI did find in there. After restart of the lap - everything worked ut well.. I am supprized !! Carsten

Mini DP to HDMI does not work with Mac Mini 2014?

Hi All,
I just upgraded from a Mac Mini 2011 i5 to a Mac Mini 2014. My old Mini worked fine running 2 displays with an HDMI cable to one monitor and a Mini Displayport to HDMI from the Thunderbolt port to another monitor. I can't seem to get the new 2014 Mini to see the monitor from either the Thunderbolt ports. Is this no longer supported?
Thanks
Ray

Hi there LaureynR,
You should still be able to do this. I would recommend taking a look at the article below for troubleshooting steps.
Apple computers: Troubleshooting issues with video on internal or external displays
-Griff

Sound through HDMI does not work on eeebox eb1501p

Similar Messages

Maybe you are looking for