SOUND TRANSITION EFFECTS

HEYA TO ALL OUT THERE
i am making a movie right now. and have been inspired by the transition sound effects from six feet under.
its like a "whooosh" sound effect when they fade to white.
any links where i can get this sound effect. not just a general link of a sound page website, but of the direct file?
cheers

If you have STP, there are hundreds of possibilities.
Otherwise, google free sound effects. There are hundreds of sites.
Probably more fun to make your own, though.
bogiesan

Similar Messages

What's the name of the Transition Effect?

What's the name of the transition effect that, dissolves the image from Top to Bottom then rebuilds the next image from bottom to top? Just simple small tiny pixels dissolving. Is there a name for this effect? Where is this effect located? Is there another program that performs this effect. I know after effects works with these kinds of effects, however I'm looking for the exact effect, dissolves all the pixels from the Top to Bottom then rebuilds all the pixels of the next image from the bottom to top.

I kind of think I know what you're talking about, but a picture is worth thousand words. Sounds like gradient wipe to me. Just apply mosaic to your gradient, pecompose and use the pre-comp as the source of your gradient. I can't know for sure until you show me a picture.
This is what a comp would look like:
Here's a CS6 project file. Just substitute the colored solids for your images.

Page transitions effects

I've looked around a lot, but I have not been able to find
any tutorial explicitly going over just how to design transition
effects between pages (i.e., the effect through which the Home page
loads, and how to smoothly dissapear its content when the viewer
clicks to go to a different page, and the same thing for all pages
basically).
I've learned the basics of motion and shape tweening, as well
as masking (using tweens), and some basic actionscript, however,
with various content on my pages it does not allow me to do a
mask/tween nor is it at all a practical solution for my specific
problem: again, I want the pages to load up and dissapear smoothly
with some sort of effect. I have set the pages up using labels.
Any input, or link to a descent tutorial on the subject would
be greatly appreciated.
Chuck

Thanks for the posting.
While they're pretty terse, the InDesign Help files are pretty clear about whether things can be exported or not.
For example:
"Movies and sound clips you add to a document can be played when the document is exported to Adobe PDF or SWF, or when you export the document to XML and repurpose the tags." (Doesn't mention FLA files.)
or
"Page transitions display a decorative effect such as a dissolve or wipe when you’re turning pages in a document that is exported to SWF or PDF format. You can apply different transitions to different pages, or you can apply a single transition to all the pages. Page transitions are especially useful when you create a slideshow in PDF or SWF format." (Doesn't mention FLA files.)
or
"Animation effects let you make objects move in your exported SWF files. For example, you can apply a motion preset to an image that makes it appear to fly in from the left side of the screen while shrinking and spinning. Use the following tools and panels to animate documents." (Doesn't mention FLA files.)
But:
"When you export your InDesign document to FLA file format, you can open the file in Adobe Flash® CS5 Professional to edit the contents. Exporting to FLA in InDesign CS5 format replaces XFL export in InDesign CS4. Use the Flash authoring environment to edit or add video, audio, animation, and complex interactivity." (The last sentence says you should do those things in Flash Professional.)

N97's transition effects aren't as cool as 5800XM,...

even with theme effects turned on, i hardly see any transition effents on my N97 other than that animation while swiping on the standby screen. My friends cheaper 5800XM has better transition effects while opening and closing items. Why? Both use the same processor and have the same amount of RAM eh?
Laugh, and the world laughs with you. Cry, and the world laughs louder :-)

@nagendra, installed the sound wave theme from http://fsa.zedge.net/mobile-download/2-493960-281724/Sound_Wave.sis
Unfortunately, i don't have any transition effects other than the homescreen swipe animation available on every other theme.
Makes me think again, the N97 isn't capable of 5800xm like transition effects. It's not just about the theme in use, it's about the device in which it is being used as well. With the same hardware, the N97 cannot display 5800XM like animations even while using a 5800XM theme. What is this, another firmware incapability?
Laugh, and the world laughs with you. Cry, and the world laughs louder :-)

Third party Flash transition effects

Can third party transition effects be used in Catalyst?

The effect code would not be accessible to Catalyst. You can use Flash Profession to animate the item with the effect you want, then import that swf into Flash Catalyst. FC does allow you to play and stop a swf.
The imported swf should be published with player 10.1 as the target.
Hope this helps,

How do I create an orange flash transition effect using Adobe Premiere CS6?

I am trying to create an orange flash transition effect using Adobe Premiere CS6 with my MAC computer.

Try this:
Add Cross Dissolve, cut and nest
Add a Fast Blur to the nest and tweak as in first screendump
Superimpose orange Color Matte and tweak as in second screendump
Make (fixed) effects into presets for future use.
Good luck.

N97 Transition Effect Problem

As you all know that the N97 user interface is not attractive due to the lack of the real transition effects, my 5800 have a nice iphone like transitions, but for the N97 the transition effect is very simple! Only some sliding menus and that’s it!! I wonder where is the screen orientation swivel effect we've seen in early N97 prototype videos? However, once I enable the transition effects on my N97 it will start to become unstable with crashes and it will affect some other programs like the photo gallery (will hang sometimes and gives low res pictures or just the whole program will go to the background while using the zoom button!) and the Web browser will start to display mid and large websites without images!!! I tried to reload the page so many times but only the text appears without any image! After trying so many times at last the page loaded successfully with all images but my happiness didn't last as I discovered that the phone turned off the transition effects automatically! When I went to the themes menu to check, it was turned on but actually it’s not working as the phone disabled it in order to load the web page! It happened to my three times since I updated my firmware last week (V 11)! I think this is because of the lack of enough RAM, I removed all the online widgets from the home screen (like facebook and accuweather) and just used contacts, programs, calendar, email, and music shortcuts which gave me additional 5 MB of free RAM and the phone felt more stable but still can’t handle the transition effects and proper Web pages display simultaneously! My 5800 handles web pages better and display all images even if the transition effects are turned on! I hope Nokia will fix these issues and gives us an option to disable the Widgets and Kinetic scrolling (Make the UI just like the 5800) in order to have more free RAM and enjoy full transition effects and proper Web Browsing with better stability just like the 5800.
Message Edited by ahmadddd on 07-Jul-2009 07:17 AM
Message Edited by ahmadddd on 07-Jul-2009 07:17 AM

Any updates on the effects? I wrote to Nokia support, I'm in Russia, they replied.
I have illustrated my question with the links to youtube where it is clearly visible how the UI rotates and other animation effects when opening the widgets.
My translation of the official reply:
"In firmware version 11 those effects do work! Try to resent the phone to the factory settings by typing: *#7780#, standard lock code is - 12345 or try to format the phone memory. Do your data and contacts back up using PC Suite . enter *#7370# (formats phone memory), enter the code 12345 the phone will resent. Then restore your back up."
Message Edited by takemori on 09-Jul-2009 04:19 PM

DVD Menu Transition Effects

I have successfully created a motion graphic DVD menu in AE, which I have rendered to be authored in Encore. The theme is horror/thriller with thriller theme for the BG music. There are two(2) selecitons on the main menu:
Play Movie Bonus Features
When the user chooses Play Movie, I would like a transition effect leading to the main video to be played. And maybe a different transition effect when the user selects Bonus Features before getting into the submenu of bonus features.
Can anyone sugguest any resources (e.g., books, manuals, blogs, video resources, courses, etc.) that can provide a tutorial on how to perform the procedure(s) in AE and EN?
Your assistance would be highly appreciated.
Montgal_NYC

The ones I am seeing are not for transitions specifically - quite a few bad links. And the ones I see may be for older versions.
http://tv.adobe.com/watch/learn-encore-cs4/creating-encore-menus-with-after-effects/
http://tv.adobe.com/watch/adobe-beginner-classes-with-dennis-radeke/episode-35-authoring-i n-encore-and-animating-a-menu-in-after-effects/
The regular help files may be instructive. But note that the links to videos do not go to the actual videos.
Encore help:
http://help.adobe.com/en_US/encore/cs/using/WSA5513911-0AD1-440c-BDAD-2E0E806B425E.html
After Effects help:
http://help.adobe.com/en_US/AfterEffects/9.0/WS3878526689cb91655866c1103906c6dea-7e45a.htm l

How to turn the surround-sound-like effect off with headphones?

When I plug in the headphones into my ipad I notice the sound in the headphones becomes kinda surround-like. For instance I clearly hear keyboard clicks "at a distance" in front of me when using headphones. This "effect" is nice for keyboard clicks but totally ruins any music listening experience because any song gets distorted and is perceived at some distance when played. This becomes extremely annoying when listening to mono content. The special sound processing applied to get this surrround-like sound effect adds artefacts into the sound, please let me know how to turn this off Apple, I couldn't find any option in the settings.
Overall, I couldn't even imagine I'd get such an annoying and unprofessional effect applied by default without a possibility to turn it off. If I knew that in advance I'd never buy my ipad since currently it's not possible to listen to music with it
Message was edited by: vvtrus

vvtrus, did you ever consider that turning off the clicks or other sounds might have an effect? So, before telling people who want to help you that an answer makes no sense to you, you might first try it.
Since hearing and listening to music is a very subjective matter which also depends on the quality of the headphones you use, it might be the case that you hear on your iPod something that you couldn't hear on your laptop and portable music player (both of non-apple design). Then you should blame those other devices to deliver you such poor sound. On the other hand, you might have a better hearing than other people which might give you the impression of surround-sound-like effects -- in which case we can't help you either.
Anyway, there are no settings to turn on or off "surround sound effects".

Is there a "Flash or White Wash" transition effect in FCP?

Hey guys,
I'm trying to get a transition effect of a "white Wash or like a Flash" in FCP5? It's an effect you see on tv when people get a make over from looking bad to looking really cool with a transition that looks like a flash or white wash.
Anyone please,
Thanks in advance,
Zia

I'm actually a fan of a combination of both Tom's and Andy's method.
Being old enough to remember film and the cool effects you'd get when stopping the camera (a number of frames that went to white as the film slowed in the gate to a stop-- number of frames depended totally on the camera. Asynchronous cameras were usually longer 6 frames or so, and the Arri's were usually 2 at most.)
Anyway, if you warp out a frame or two with the CC and use them in your opacity ramp, you can get some really cool stuff.

Keynote '09: 2 transition effects per slide initiated by 2 hyperlinks?

I want to do a flip book. So far it looks great.
I'm using forward and back hyperlinks to transition b/w slides.
Problem: I can only get one style of transition effects/slide, so when I flip back to a previous slide the flip animation looks like I'm flipping forward.
Any help on this would be greatly appreciated.

Ok... After more scouring, I found this thread: https://discussions.apple.com/thread/2355380?start=0&tstart=0
Which had this part buried in it:
Remove the navigation (rip out the hyperlinks), set the presentation to run as a Normal Presentation, then Share>QuickTime>Fixed Timing. That's right, I said Fixed Timing. Turns out me and a lot of other people (and yes, some tier 1 support folk at Apple) misunderstood Fixed Timing. Fixed Timing lets a Normal presentation run with the audio and moves on to the next slide when the audio is finished - which is exactly what I wanted (the QuickTime controls automatically appear after the movie is rendered). Slide Duration is actually the delay between slides so set this to 1 second and Build Duration affects the timing of the Builds, but I also set this to 1 second since it was destined for web delivery (bandwidth!).
I struck thru the first part b/c that wasn't relevant to my issue, BUT... what WAS relevant was removing all of my carefully timed slide delay transitions, then using the above method. It worked flawlessly, as far as I can tell. It seems without documentation or help of any kind (that I could find) no one, even Apple support staff, knows what the true function of Fixed Timing is supposed to be. So hopefully, if someone else stumbles across this post, they'll be able to do the right thing, from the start and not waste hours with expensive or additional programs and work arounds.
Follow the above method and still get your timed HD quality Quicktime .mov.

Cross-fade effect missing from transition effects

I used to export slide-shows from image folders with QuickTime, and on Tiger and PowerMac PPC G4 that worked fine choosing cross-fade transitions.
There was also the possibility to export slide-shows with Graphic Converter (using QuickTime effects), and the cross-fade transition was available.
Now, with Leopard and QuickTime 7.5 the cross-fade (aka dissolve transition) is missing from the transition effects. Is that a bug ? Is there a way to recover that transition effect ? I re-installed QuickTime, but that didn't changed things.
Thanks for any input...
N.

I still have my PowerMac G4 with all things installed, so I checked in QuickTime the slide-show export, and it doesn't have options for transitions in the effects. Oups !
So I guess it's only related to Graphic Converter 5.9.5 where in the transitions the cross-fade isn't available anymore when I upgraded to Leopard. Maybe I should upgrade Graphic Converter.
Anyway, thanks for the iPhoto tip, but I can't find where I can change the default settings...
N.

Transition effects in Wizard not available

I am making a wizard, and it works okay, but....
The transition effect dropdown box is disabled.
How can I enable it to choose other effects?
UPDATE:
I discovered that this option is only enabled in Flash.
Same with the Toolbar. I can define a Toolbar, but in Web Dynpro it is simply not shown...:-((
Message was edited by: Jan van Veldhuizen

Hi Jan,
This is correct, the transition effects are a part of the Flash runtime.
Cheers,
Scott

Transition Effects Walkthrough?

Hello Forums:
I'm wondering how the transition effects on this website is done:
http://www.templatemonster.com/flash-templates/24841.html
How does the creator organize his layers and animation so that the site zooms out and zooms back in?
Thanks.
Christopher Xiao.

Try to make a few more transitional states in between with varying levels of opacity for each picture (and play with the State Delay time). Other than that, i don't think Fireworks has transitional effects for slideshows (i may be wrong).

More slideshow transition effects

Fade, horizontal, and vertical are nice but kind of boring. Are there any plans to have more transition effects in slideshows, like some of the ones in PowerPoint like:
- Blinds Horizontal
- Blinds Vertical
- Box In
- Box Out
- Checkerboard Across
- Checkerboard Down
Is there anyway to have different ones now through coding?
Thank you,
Gary

Hi Gary
You can use the available options with slideshows and if you want something specific then you can try to integrate third party sliders.
Please feel free to add your suggestions in our ideas section.
Thanks,
Sanjit

SOUND TRANSITION EFFECTS

Similar Messages

Maybe you are looking for