Sound when earphones are connected

I have had my Ipod touch for about 8 months now and found through trial and error how to fix this problem, but since the current software upgrade what I used to do isnt working.
When I plug my earphones in the ipod the sound comes through both the ipod and earphones. What I want to know is how to stop it on the Ipod so that it only comes through the ear phones when they are commected, yet when the earphones are pulled out it will come back through the ipod.

just bumping this, can anyone help please?

Similar Messages

Why won't DND supress sound notifications when earphones are connected?

The other day I was listening to relaxation music and switched on DND to avoid being disgurbed by any notifications. My earphones were connected. The iphone did play all sound notifications like mail and whatsapp and that was a big annoyance to my meditation.
I know I could use airplan mode but i dot wanna miss important notifications for review later.
Anyone facing a similar issue?
Neerav

Yeah, i did it already but i can not get the device to reset. I let it for 10 sec. But the logo never appeared. Tried it several times, no result. Is there a another way to do that ?
Thanks

Yellow screen appears when earphones are connected

Hi,
It's about my Ipod Nano 6th generation bought in April 2011.
each time I plug any earphones into the jack the nano gets stuck in a kind of starting page with yellow letters (a kind of BIOS if I may say). Moreover the sound control button are not working.
The USB plug is working, I can synchronise, restore through Itunes, even listen to music when it is connected withe this plug to my car. But it won't work with regular (several types tried) earphones.
Can somebody help ?
thanks
Phil

Yeah, i did it already but i can not get the device to reset. I let it for 10 sec. But the logo never appeared. Tried it several times, no result. Is there a another way to do that ?
Thanks

Received a replacement ipod nano in early January . Works well in a sound system but keeps turning off when earphones are used. tried 3 pair but same result. When tried for support comes up as expires. Says I have to purchase . Why????

Received an ipod nano replacement in January. It works in a sound system but keeps turning itself of or loosing sound when earphones are used. I have tried several sets os earphones with the same result. When I just tried to seek support my Serial number comes up with warranty expired although the letter says 3 mths warranty. What gives Apple ??? Any one any advice??/

This is usually an indication that your headphones are not plugged all the way in. The white plastic part of the headphones should be flush with the Nano and no silver from the plug should still be visible. The headphone jacks on the new 6G Nanos are a bit tighter than previous generations, so it requires a bit of extra push to get the headphones to pop all the way in.
Also check make sure the jack is clear of debris such as lint.
B-rock

Sound does'nt shut down when earphones are plugged in. Ipad Mini.

Sound doesn't shut down when earphones are plugged in. Same earphones used with other ipad or iphone give no problem.

might be a hardware issue with the headphone jack. Try cleaning it with a dry soft toothbrush to remove lint and dust.
If that doesn't help:
Try doing a hard reset for the iPad: Press and hold both the Home button and the Sleep/wake button simultaneously for about 15 seconds and release when the Apple logo appears.
If that doesn't solve the issue, you could also try backing up the device and restoring the device as new.
In that case, follow the steps in: http://support.apple.com/kb/HT4137
NB: set up as a NEW device because a software issue will be in the backup. If the issue persists after restoring as new, you should offer the device for service.
If you get specific error messages/codes in iTunes when updating/restoring, check this: http://support.apple.com/kb/ts3694
If you're not able to restore the device, this one might help: http://support.apple.com/kb/HT1808
Using that last article will erase everything on the device, so make sure you have a backup!
Good luck

HT203442 So what do I do if my earphones ARE connected properly, and the player still stops?

My earphones are connected as they always have been. It worked going to work in the morning, and on the return trip home, the player started turning off... what gives? Has anyone found a fix? Apple Support says I have to pay $30 just to TALK to someone, no promises that they can fix anything. No offense, but I can buy a generic MP3 player for $30 that WILL work. This may be the last Apple product I buy...

I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items.

I get an audio sound when my S5 connects to a wifi source. How do I stop the sound?

I get an audio sound when my S5 connects to a wifi source. How do I stop the sound?

Let's see if we can get that notification sound off treecastle! Please try going into Settings> Sound> Notifications> select Silent> Apply. This should get rid of that notification.
Thank you,
VanessaS_VZW
Follow us on Twitter @VZWSupport

My iPad screen went black suddenly and is not coming back on. However i can still hear sounds when there are notifications but nothing comes on the screen. It remains blank. What is the problem? I NEED ASSISTANCE A.S.A.P!!!

My iPad screen went black suddenly and is not coming back on. However i can still hear sounds when there are notifications but nothing comes on the screen. It remains blank. What is the problem? I NEED ASSISTANCE A.S.A.P!!!

Try Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

How to fix keyboard clicks and lock sounds when they are on in setting , sounds and still do not work?

How to fix keyboard clicks and lock sounds when they are on in setting , sounds and still do not work?

Double-click the Home button and swipe the Task Bar to the right. Check Volume and Mute Settings.
Message was edited by: Diavonex

IPad makes beeping sounds when charging while connected to mac

iPad makes beeping sounds when charging while connected to mac

First off, I suggest using the charger that came with the iPad and plug that into a good wall outlet. USB ports often do not supply enough power for efficient charging on an iPad.

Sound problem(earphones are okay ,checked with my pc)problem is when i listen songs on ipod,unwanted sounds along with songs is produced..so music is not cleared.How to remove these noises or unwanted sounds...pls

sound problem ..
unwanted sounds are produced continuously along with played music while listening .. earphones are ok(checked with PC)

sound problem ..
unwanted sounds are produced continuously along with played music while listening .. earphones are ok(checked with PC)

Getting a buzzing sound when power connector connected

Hello,
Everytime I connect my power-connector to my powerbook, i get a buzzing sound, which sounds like something is being written to the hard drive. When I dont have the power-connector connected, the computer buzzing vanishes. Has anyone else experienced this? Does the battery really have to charge that loudly?
Thanks in advance.

What type of AC adapter do you have?
The Aluminum 15-inch and 17-inch MUST use a 65W adapter. Contrary to popular belief, the 45W adapters are not meant for these machines, even though they "work."
When I plugged a Titanium PowerBook's adapter to my aluminum 15-inch PowerBook, I got a buzzing sound emanating (coming out) from the AC's "brick." The TiBook's adapter was a 45W.
While connected to the standard 65W adapter, no problems with my aluminum 15-inch PowerBook.
45W is lower rated and doesn't have enough juice to charge your 15-inch or 17-inch correctly. While it is charging and providing power, it is weaker. You may notice it takes longer to charge your battery when connected to a 45W adapter as opposed to the 65W one.
Though, playing devil's advocate, some 65W adapters can make that buzzing sound if they are faulty or damaged.
SIDE NOTE: This makes it seem like the 65W adapter is then, logically, not good to use with the 12-inch PowerBook G4, but it is fine. The original adapter supplied with the 12-inch PowerBook G4s are rated 45W, but they replaced it later down the road with the 65W adapter. (If you get it replaced with AppleCare via mail-in service, you get a 45W replacement part. Though at times, 65W part. If you get it replaced with AppleCare via the retail's Genius Bar, they give you a 65W brick. Also, the compatibility chart for the 65W shows it to work with all aluminum PowerBook G4s).
Message was edited by: Pismo 900:
I'm not an electrical expert so someone may be able to corroborate my words above, but in better terms. For instance, the reason why the 65W works with the 12-inch PowerBook is that even though it supplies more power, the 12-inch can only receive 45W. On the 15-inch and 17-inch models, it needs 65W, so using a 45W "strains" the AC adapter because it is trying to draw more "power" (the 65W) it needs from a weaker plug. Thus the buzzing noise.
Like I said, someone else can explain that better, if it doesn't make sense. =)

Viewing ink on 2 different printers on my laptop when both are connected wirelessly

I have 2 different HP printers (let's call one a 4500 and one a 6500} in different, far-off locations in my home. Both are connected wirelessly to my laptop which runs Windows 7 (64 bit). I have no problem changing from one printer to another on my laptop; each printer will work fine wirelessly. However, I would like to utilize HP's "Solution Center" software for BOTH printers on my laptop, instead of the ONE printer (the 4500) that is available to me now. Any ideas?

If you have the full feature software installed for each printer (get the latest software for your printer from the "Support & Drivers" link at the top of this page) then in Solution Center you should be able to choose between the two.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Nano pauses when connected to Bose SoundDock & when earphones are out

I've just taken delivery of a new Bose SoundDock. Of course the thing works perfectly, (I've had it back to a Bose dealer) but my Nano doesn't. Whilst in the store we noticed that my Nano paused whilst in their test SoundDock and then noticed that it paused after it had been taken out (but without headphones in). I'm listening to it now with headphones in - no pausing.
Reading thru some other discussions revealed that there is an issue with Nanos pausing because earphones weren't installed. Is this why it doesn't work with the Sounddock?
I've reset (numerous times) and restored and upgraded to iTunes 7. Please tell me I don't have to send the SoundDock back because my crappy Nano won't work in it ...
hp pavilion a700n Windows XP

I have the same problem...

Hundrests of Mail sounds when earphones plugged in or out of iMac

Hi
When I plug my earphones in or out of my iMac I instantly get all the sound effects from Mail (from the entire day/week/period of time since I last plugged my earphones in or out) - is there any way to fix this, as it's crazy when an entire day's worth of Mail sounds come in at once.
PS: This has been happening for the last month or so...even after updating to Mountain Lion and having the HDD replaced as part of the iMac Recall Program
Thanks.

When they aren’t plugged in the sounds still comes through the internal speakers, the “Built-in Output is:
Clock Source: Default
Source: Internal Speakers
Format: 44100,0 Hz – 2ch-24bit Integer
Master N/A
CH 1 – Value: 1 – dB: 0
CH2 – Value: 2 – dB: 0
And I don’t see any changes when I plug the earphones in or out…unless I’m looking at the wrong place – Utilities, Audio MIDI Setup, Build-in Output?
I’ve tested the sounds by sending a few emails and the problem seems to come and go, because when I unplugged my earphones this morning, I had 4 new emails, and four sounds came in one after the other even thou the messages were a few hours old…but then as soon as I sent the test emails (with earphones in) and took them out no sounds came through.
I’m just gonna live with the issue, as none of my other sound utilities are affected.
Thanks

Sound when earphones are connected

Similar Messages

Maybe you are looking for