Sound won't play after mavericks upload

Uploaded Mavericks and sound does not play on FCP clips

BDAqua, den.thed Thank you So So MUCH!!!
I've tried touching the Audio Midi Setup and some how it did the trick!
Although the problem is solved, should I contact the Mac Support to fix the micro swich?
I do use my headset alot, to my mac to laptop...I wonder if I should call the Mac Support anyways to check it out.
Thanks again!!!
With Luvs <3

Similar Messages

  • My apply tv won't play after it did a update

    My apply tv won't play after it did a update

    If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
    Connect the micro USB cable to the Apple TV and to your computer.
    Reconnect the power cable (only for Apple TV 3)
    Open iTunes.
    Select your Apple TV in the Devices list, and then click Restore.
    (You may already have a micro USB cable if you have a camera or other digital device)

  • TS1389 Only one song won't play after authorizing my computer. I authorized it over and over. I even deauthorized all computers, and still same results. How can I fix this ? I'm using a MacBook Pro with iTunes 11

    Only one song won't play after authorizing my computer. I authorized it over and over. I even deauthorized all computers, and still same results. How can I fix this ? I'm using a MacBook Pro with iTunes 11

    Hi Deb,
    Deauthorizing all is definitely the way to go.  You will just need to authorize your computer again after, as well as your husband's.
    Here's some additional information on deauthorizing all:
    iTunes Store: About authorization and deauthorization
    http://support.apple.com/kb/ht1420
    I hope this helps!
    - Ari

  • The New Mail sound won't play through SoundSticks

    After many many years of using Eudora as my E-mail client, I have finally switched to Apple's Mail. So far, so good, EXCEPT for an inability to have Mail's "New Mail" sound play through my SoundStick USB speakers.
    I should mention that I use a "dummy plug" plugged into the front headphone jack of my G5 so that I don't have to listen to the startup bong when I turn the computer on. This has never been a problem because I use SoundSticks for my audio and, since the G5 can't "see" the SoundSticks when you first turn the G5 on, no bong through the SoundSticks either. Once the computer is up and running, all audio comes out of the SoundSticks. This is true of all of the alert sounds my Mac makes too. Even the "Send Mail" sound (swooshing plane) plays through the SoundSticks as it should.
    But the sound I have selected for "New Mail" (no matter which sound I select) just won't play through the SoundSticks. If I unplug the dummy plug from the headphone jack I can then hear the "New Mail" sound through the internal speaker. But I don't want to hear it that way (and I don't want to permanently remove the dummy plug either).
    Why is it that Mail's "New Mail" sound is the ONLY bit of Audio that I've found that WON'T play through my SoundSticks?
    Help!
    Mark
    P.S. A friend of mine is having the exact same problem with a G4 connected to SoundSticks. He says "HELP" too!

    Anyone?

  • Burned CDs won't play after updating to 6.0

    After updating to 6.0 and 6.01 the CDs I burn won't play in my car stereo. This was never a problem prior to the updates.
    I double checked everything I could think of and am burning them to CD-Rs and have audio CD selected on my burning preferences. I have even tried using several different brands of CD and using a slower burning speed.
    Any ideas?

    absolutely nothing.All the controls are normal. When i try to double click a track to play it just highlights the track. When i use the play button, it operates but no track plays. Even in purchased tracks it won't play! There are one or two tracks that will play normally but they are random ones. Have tried the suggestion that are recommended but with no success.

  • Ipad 2 video and sound won't play (6.1.3)

    My iPad 2 with iOS 6.1.3 won't play video or sound.  Does anyone know why? Or is there something I need to change in the settings?

    go into settings -> general -> sounds, then raise the volume.

  • IBooks, Mail, After Affects, Quick Time Player, Maps, App Store, won't open after Mavericks install/update

    Just about everything on computer is slow as mollases after Mavericks Update. I am very angry because I can't use After Effects at all. It says it's not compatible with this new system. My mail application crashes as soon as I open it. Notification centre is non-existent now and Messages app won't open at all. Other apps such as iBooks, Mail, After Affects, Quick Time Player, Maps, App Store, and a few others won't open at all on this new system. I'm soo angry with Apple as I've never had so many problems with a new OS X. .. I would love to downgrade back to Mountain Lion OS. Anyone with helpful info, please respond. Thanks.

    Hi,
    From the top More Like This item
    https://discussions.apple.com/message/23487600#23487600
    7:29 pm      Sunday; October 27, 2013
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.4)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • Audio won't play after audio render

    I have an MP3 on audio track 1 in Premiere/CS4, placed underneath video clips which I've unlinked from the audio and deleted/cleared those unlinked audio files.  The MP3 file plays fine until I render the timeline and then it stops playing.  If I 'double click' the file (placing it back in the source window) it plays fine there, but won't play in the timeline.  I've included the file properties below.  Does anyone have any idea why this is happening and what I can do to fix the problem?
    Type: MP3 Audio
    File Size: 4.2 MB
    Source Audio Format: 44100 Hz - compressed - Stereo
    Project Audio Format: 44100 Hz - 32 bit floating point - Stereo
    Total Duration: 00:03:03:32868
    Average Data Rate: 23 KB / second

    I could do a MP3 to WAV conversion, but that defeats the
    purpose of storing my (growing) music library in MP3 for space conservation.
    I understand the space problem. Only do this for files that you are using as Assets, Imported into PrPro, if they give you a problem.
    Seems I'm finding I have to do a lot of 'work arounds' with CS4.
    Well, it does seem that you are not alone on this one. However, my problem came with PrPro 2.0. In my case, it only happened once, but did affect about a dozen Audio files in several Sequences. Did not realize the magnitude of my issue, and only observed it after a busy day of trying to Keyframe some Effects and doing multiple Renders to check things out. One moment all Audio in that section was playing well - next moment (after one more Render) dead. Others, who replied to my thread indicated that it had happened to them too, in similar circumstances. Trouble was, none of us could duplicate it and some had this happen on their first Render, while I'd probably done a dozen that morning. Have never had it happen again, and finished that Project with hundreds more Renders, just like I'd done, with not one problem. I certainly can not call it a Bug, as there was no way for anyone to reproduce it. Still, whatever allows it to happen, under the right (or wrong) circumstances seems to be around two generations later. Hey, phases of the Moon?
    Good luck, and let's hope that neither of us sees this behavior again,
    Hunt

  • Sound won't play in .fla file

    How can I get sound to play in .fla again like it did before
    actionscripting control buttons?
    When I installed control buttons in my .fla file for a
    maintimeline movie to stop, start, rewind, and jump to end of
    movie, sound would no longer play when running the playhead in the
    .fla file. This is a disadvantage when it comes to trying to sync
    video to audio.
    I have installed an additional layer in main timeline with
    same mp3 file attached, published settings, and even assigned
    actionscript play(); to sound layer and deleted sound layer with
    control buttons, but sound still won't play from .fla playhead

    steam your sound.

  • Movies won't play after update to iPhone 2.1 Software

    Help. I updated my 16GB iPod Touch with the iPhone 2.1 software to support applications. But now, when I go back and try to play my mp4 and m4v movie files on my iPod touch, they won't play. When I try to play them I get a warning that says "this movie could not be played". Videos I purchased from iTunes continue to play just fine.
    Is this a new anti-piracy thing or something like that or am I having a problem with the iPhone 2.1 software? If I knew I wouldn't be able to watch my old movies and TV shows, I wouldn't have upgraded to 2.1.
    Thanks for your help.

    Just a quick update on my issue... which seems different than most.  To summarize, I tried updating from iTunes 10.6 directedly via USB.  Got an empty progress bar when it "rebooted" after "successfully updating" to 5.1 with a memory allocation bar on itunes showing most the memory as allocated to "other", instead of the usual memory allocation to apps, music, pcits, etc.  Rebooted the phone, but still came up with an empty progress bar, but would connect to itunes.. showing booted as 5.1, but again the memory was still allocated to "other".  Started recovery process on itunes to try to bring back my old config, after which the iphone fully booted (into 5.1), but was completely.... recovered and re-installed all my apps, music, etc without a hitch and rebooted successfully, this time the memory allocation was correctly labeled, but somewhere I gained 2.0 GB of memory, even with all the same apps and music installed.  I had to do some minor additional configurations (password lock had to be re-enabled), but otherwise, everything was working.  A bunch of apps lost their stored settings... which I though strange as I expected the "backups" to store those settings as well.   Otherwise, running 5.1 now without issues... seems much snappier than 5.0.1... but the process was nerve racking to say the least.
    Best of luck with other "explorers" tyring to make the whole process work.

  • Movies won't play after downloading 2.0 software?

    Yesterday I figured out that apps i purchased weren't working because I hadn't had the most recent software, so I downloaded 2.0. Before doing this, I had purchased a movie from itunes on my PC, which worked perfectly until i tried it for the first time after having the update. Every time I try to play the movie on my ipod touch (1st gen), a pop up comes up that says "This movie could not be played." Help Please?

    i cant play any new uploaded videos..
    i just downloaded a music vid and theirs only a grey screen..
    nothings showing..
    plz help...

  • Videos won't play after update

    Updated iPad 1 to OS 4.3.3 and now all iTune videos won't play. Screen goes black and then resets with "Unable to play this video" message. Any way to fix without downloading 50gb of movies again?

    Not sure if this was the fix but the problem was resolved. I was also having App store sync problems so I rebooted the iPad (hard reboot) and then immediately went to app store any updated all apps (video player want one of them) and after it was complete I did another hard boot/reset. When the iPad restarted I immediately went into the video player and Problem Solved!  Nt sure how it resolved itself but it works without reloading the files. Never connected to my laptop or resync'dthe iPad but just did an update to all of my apps from the App store (there were 11 to update). Good luck with it.

  • IMessages won't open after Mavericks upgrade

    iMessages won't open after I upgraded to Mavericks. I keep getting prompted to "enter the keychain password," but I never created a keychain. I never used it before the upgrade, and I skipped the step during the upgrade because I did not want to use keychain and it was an option to skip it during set up.

    HI,
    The OS X Mac have been using Keychains for a long time.
    In the Applications/Utilities folder open Keychain Access.
    This should show you at least two keychains.
    The Login one for your Mac User account and the System one.
    Generally speaking the Keychain keeps the passwords used by various apps and it needs to be Open.
    In most cases the Login password for the Mac Account user is also the password that opens the Keychian when the computer is started up.
    As each Mac User Account owns it's own Keychain there can be issues when you drag an account from one computer to another rather than using Migration Assistant.
    i.e. you might Own it on one computer but not on another.
    In the Finder > Go Menu hold down the ALT key and select the Library that appears.
    In the library navigate to Keychains.
    Click to highlight the Login one.
    Now use the CMD and i keys together (Get Info)
    At the Bottom unlock the padlock
    Highlight the name that has (me) next to it (it should be your Shortname).
    Once you have highlighted this use the cogwheel item at the bottom.
    This should be greyed out but saying "Make you (Me) the Owner."
    You should also have Read and Write permissions like in the Pic.
    8:48 pm      Sunday; December 29, 2013
      iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • AC97 Sound won't play

    THe program I'm writing includes an audio alert at certain points.
    I use java.applet.AudioClip to point to the chimes.wav (the standard windows one) in an application directory and use the play() method to play the wave file, but on certian computers (Averatec 3200 and 3300), the sounds don't play. The wave files can be double-clicked to play, but don't play when called by java. I did some poking around and have reason to beleive that this is because of the RealTek AC97 audio drivers in use the by the averatec machines, but I haven't found a solution or workaround. Anyone have any ideas or information that I'm lacking?

    BDAqua, den.thed Thank you So So MUCH!!!
    I've tried touching the Audio Midi Setup and some how it did the trick!
    Although the problem is solved, should I contact the Mac Support to fix the micro swich?
    I do use my headset alot, to my mac to laptop...I wonder if I should call the Mac Support anyways to check it out.
    Thanks again!!!
    With Luvs <3

  • How do I get my HD movies to play on my laptop? Won't play after latest update

    I'm trying to watch an HD digital movie on my samsung laptop through my iTunes and it won't play. I'm not sure why as I've watched this movie on this laptop before. any advice?

    <http://www.apple.com/quicktime/mpeg2/>
    <http://www.squared5.com/>

Maybe you are looking for