Sound wont play after updating latest OS

Hi,
I just updated my OS to the 10.8.4 and now my sound will not play?  Any suggestions? 

Hopefully one of these steps should solve the problem.
1. System Preference > Sound > Output > Internal Speakers
    Highlight  Internal Speakers / Headphones
    Make sure Mute is not enabled.
2. Remove the headphone.
    If you see red light in the headphone port, plug the headphone
    in and out of the port 5 or 6 times to flip the microswitch inside.
    Sound output may be stuck in the digital mode.
3. Reset PRAM.  http://support.apple.com/kb/PH4405
4. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
5. Applications > Utilities > Audio MIDI Setup
    Audio Devices window
    Side Bar
    Click the Built-in Output.
    Under Mute any of the boxes checked? If so, uncheck it.
6. Reinstall Mountain Lion 10.8.4 Combo Update.
    http://support.apple.com/kb/DL1659

Similar Messages

  • Music wont play after updating iPhone 4 to iOS 6.

    After upgrdaing my iphone 4 software: my music library wont play any songs. It just skips all of them until it reaches the end of the list. I't seems that subscribing to iTunes Match will solve this problem but i dont want to pay for it. Is there any other solution that dosnt involve subscribing?

    I'm having the exact same problem! Only some of my songs are on there. Like it will show that the song is there but the content is not. It keeps skipping until it finds a song that actually downloaded. I've restored my phone twice since upgrading to ios6 and nothing helps. I hate this update and wish I never did it.

  • Some of my podcasts are in a light grey font and wont play after update and sync. They appear but I cant listen to them.... Why not?

    I guess the title kinda says it all....

    iTunes: May be unable to transfer videos to iPhone, iPad, or iPod - http://support.apple.com/kb/TS1497

  • Appstore wont open after update ios 6.0

    appstore wont open after update ios 6.0. my imessages undelivered too. ps help

    yes i have connection. its solved already thanks to
    watanabe_apple
    This solved my questionRe: Install apps from AppStore after update ios6 is not working 
    Sep 25, 2012 9:26 AM (in response to pkruitz)
    1) Quit App Store in multi-tasking.
    •From the Home screen, click the Home button twice.
    •Tap and hold on the app.
    •When it starts to jiggle, tap the red in the top corner to close it;
    ***Please close all open apps on your phone***
    2) Tap Settings.
    3) Tap Safari.
    4) Tap Clear History.
    5) Tap the Clear History button.
    6) Tap Clear Cookies and Data.
    7) Tap the Clear Cookies and Data button

  • My itunes wont work after update

    my itunes wont work after update. whats the problem.

    also, the curser just goes round and round. cant close by clicking x, have to close frome the place that says close. then message says program not responding.

  • ITunes wont run after update today says missing file msvcr80.dll

    iTunes wont run after update today says missing file msvcr80.dll
    tried to reinstall, nothing changed.

    Check out the user tip below.
    https://discussions.apple.com/docs/DOC-6562

  • I tunes wont play or update songs

    my i tunes wont play or update my ipod with any of the songs that i have downloaded from i tunes. says im not authorised how do i change this thanks very much.

    i have the same prob!
    HELP?

  • Adobe wont print after update 9

    Can't print after updating to Adobe reader 9. Using a B&W multi "old girl" Lanier 5235 and I tried uninstalling Adobe and reinstalling without help. I can print a PDF file via Preview and I csan print word files via word etc. etc using the diff. cases in the printer, but Adobe just wont print after update. Any good ideas from you guys?

    Quite sure its Snow Leopard that made it impossible for me to get to the diff. trays. And this link (http://support.apple.com/downloads/LanierPrinter_Drivers_for_Mac_OS_X_v106) is the only one that doesnt work . Furthermore I asked Lanier if they knew about it, but they didnt seem to have a clue... a bit funny I think... also frustrating though

  • I have rented a film and it wont play after 16mintues?

    i have rented a film and it wont play after 16mintues?

    When posting in Apple Communties/Forums/Message Boards.......It would help us to know which Mac model you have, which OS & version you're using, how much RAM, etc. You can have this info displayed on the bottom of every post by completing your system profile and filling in the information asked for.
    CLICKY CLICK---> https://discussions.apple.com/docs/DOC-3602
    CLICKY CLICK-----> Help us to help you on these forums

  • I have the portable BOSE sound dock and after updating my ipod to ios7 the remote control of the dock only works for the volume but doesnt work for skipping songs....Is there a solution to this?

    I have the portable BOSE sound dock and after updating my ipod to ios7 the remote control of the dock only works for the volume but doesnt work for skipping songs....Is there a solution to this?

    Have you went to Bose"s support site?
    Sometimes this works
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             
    However, sometimes an iOS update breaks compatibility and you will have to wait for an firmware update for the Bose or an iOS update.

  • My iPhone 5 64g cannot on after update latest ios from 8.2 to 8.3

    My iPhone5 64g cannot on after update latest ios 8.2 to 8.3

    Thanks for the quick response ,
    it did help alot and now the iphone works much much better and faster.
    can you please try to figure out how to fix the messages search so it work fine
    its give me now result maximum up to 3 days old
    thanks friend

  • Ipad 2 wont restore after updating to ios 7

    ipad 2 wont restore after updating to ios 7

    Hello pinky03,
    I would be be concerned too if I was not able to restore my iPad.  If you have not resolved the issue, I recommend following the steps in this article for an issue like this:
    iOS: Unable to update or restore
    http://support.apple.com/kb/ht1808
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • App wont open after update???

    My facebook wont open after latest update.. Wassup?

    Hi kryptonmusic,
    Thanks for using Apple Support Communities. Based on what you stated, it sounds like an app you installed will not open. I would recommend that you read this article, it may be able to help the issue.
    If an app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
    Cheers,
    Mario

  • Youtube videos wont play after using Quicktime (which changed my preferenaces) how to fix?

    I played a video in Quicktime on my pc (against my better judgement). Quicktime went through my FF & changed everything to be played in QT, now online videos, specificallt Youtube, wont play in my FF browser (3.6.14).
    I get sound but no picture.
    What do i change back to fix this?I have changed everything to either WMP or VLC to try & get it to play with no luck so i must be missing something?

    I had this problem and searched it and came up with a solution that works for me.
    First, I only started having this problem for the last few days, this came after a multitude of updates from Adobe and Windows.
    The videos would only play (though the sound kept playing) if I kept moving the mouse cursor over the video.
    My solution, I went into Tools \ Options \ Advanced \ Network ... and simply cleared the Cache Web Content. I might have also deselected Override Automatic Cache Management ... but regardless, this is the solution that is still working for me.
    I should also add that when FireFox gets flaky that's where I always go and that seems to solve any strangeness. Just passing this on.
    EDIT ---- Just now I experienced the same thing. I obviously did not fix this issue. Sorry for this unnecessary post.

  • After updating latest security update for my OSX 10.7.5 one of my usb port is not working now.how do i know what is cause that usb port is not working after security update

    one of usb port in my macbook pro havent work after i ve updated latest security update for osx 10.7.5, how do i know what is cause that usb port is good or bad

    On a Mac running v10.7.2, the only way to reinstall Safari is to reinstall OS X using OS X Recovery.
    Safari 5.1.1 is for Snow Leopard. It will not run on a Mac with v10.7 installed.

Maybe you are looking for

  • Firefox will not open new window, Why?

    I have Vista home base premium operating system. I am a regular user of Mozilla firefox after had lots of positive feedback as one of the best browser. I had no problem for a good while, until recently I found out my add-on firebug stop working. Then

  • How do I merge one user ID with another on my mac

    I set up my Mac prior to migrating from my PC and this created one log-in for me. When I migrated info from my PC, another log in was created. How do I merge the two, so all information is in one place? Thank you!

  • Logical Facts not all joined to Dimensions in an OBIEE model

    We have a few OBIEE logical models where some of the fact rows don't have a corresponding dimension member. Essentially the FKs on the Fact don't have matching PKs in the Dimensions This has come about over time as we've made enhancements to our mode

  • Function Module as Datasource loading error

    Hi,All   I use function module as datasource and create a fm in function group: RSAX   But when i loading data from the DS , it display :   Error occurred in the data selection Code: DATA: l_s_select type srsc_s_select,. statics: s_s_if type srsc_s_i

  • Pre-configured Roles

    Hello, is there any summery of all the pre-configured Roles with its Role_ID and a description of each role? Best Regards, Sandra