Sound works for all programs in Windows 7 (64-bit) except iTunes (64-bit) which stopped working after months of working fine.

Sound works fine for all programs on Windows 7 (64-bit) except recently 64-bit iTunes just stopped working. I believe the sound stopped right after downloading the 10.5.1.42 version of iTunes.

Sir,
I had the same problem with itunes 10.5 with creative labs sound card. The only way I could solve it was to use the built in sound on my video card. But needless to say I have a very high end video card, I have the NVIDIA GTX 580. And after I used the sound on my video card everything worked great.

Similar Messages

Print pdf in Acrobat 9 stopped working for all programs (only the pdf converter office add-in works)

Windows 7 x64 has a problem:
http://social.answers.microsoft.com/Forums/en-US/w7files/thread/0617cfb6-dd06-4cb6-874d-0c ec97d3a310?prof=required&ppud=4
To solve that nesting issue, I followed these instructions:
In order to accomplish the proper redirection, you need two junctions:
1) A Local Settings junction, that will forward programs going to
%userprofile%\Local Settings to the new folder.
2) An Application Data junctions *inside of the new folder* that points back on itself, to get programs accessing %userprofile%\LocalSettings\Application Data.
If you think about it, it makes sense ... when the program is accessing local settings, it will get forwarded to the folder it needs to be in, however, it is also accessing a folder named Application Data *inside of the correct folder it needs* (since it has already been redirected by the Local Settings junction), so the Application Data junction has to point back on itself for things to function properly.
I would suggest checking the security settings on your Application Data junction (C:\users\yourname\appdata\local) (you will need to select show operating system files from folder options in an explorer window).
Go to the security tab, click advanced, then edit, and make sure you see a deny permission for everyone on the list.
If there isn't one listed, create one for "Everyone" and check the box under Deny next to "read folder / list data".
Once I added "everyone" and "deny", I received 300 error messages, which I all clicked on "continue".
After each restart, no program worked, and hundreds of error messages popped up.
So, I removed the "everyone denied" entry again.
Now, all programs start normally.
But:
If I want to say "print to pdf", it goes through the motions, prints something, and opens the pdf dialogue, and at exactly half time of the progress bar says "stopped". No matter if I want to pront from internet explorer, windows explorer, acrobat, word, editor, ...
Why?
How can I reverse this?

I can't open the Form Tools though is what I'm saying. When I open the document in Acrobat 9 Pro I have no form tools.
I have to go to [Forms] -> [Edit Forms in Designer] in order to open the form tools.
Only when I select to open in designer I do not get the Acrobat Pro Designer, it automatically opens the document in LiveCycle and I have no option or ability to change the document designer to Acrobat Pro.
Is there some way I can "Force" the docement to open in Acrobat 9 Pro designer JUST so I can add the print button?

How do you set a usb sound card as the default sound device for all programs?

I'm running cmus for a music player and it works fine with the internal speakers on my macbook pro. I'm using a usb sound card for a set of 5.1 surround speakers and cmus won't send it's audio to the usb sound card. I've also tried several other programs for audio and it seems to be hit or miss with being able to use the usb sound card. I'm not sure if I'm overlooking the a setting or if there is a different audio output plugin for cmus that has the functionality I need. Cmus also won't play over any bluetooth audio device while some other sounds will.

Yes I did and it does not appear there. Only the ringtones I have created myself and the default ones appear in the list.
In settings>sounds>ringtone however they all appear

Why does the sound only work for certain programs?

The sound is only working for certain programs on my iPad. Does anyone know why? Any help is appreciated.

It sounds like you have System Sounds muted. Either the switch on the side, or double tap the home button and swipe to the right, ICON will be on the far left. If the ICON is screen lock related, then it is the switch on the side.

In PHotoshop CC, my blenidng options are not working at all. A window comes up with the message "

In PHotoshop CC, my blenidng options are not working at all. A window comes up with the message "Could not complete your reequest because of a program error. "
Linda

In Photoshop CC whenever I try to apply blending options to a layer, an error message comes up.. In my error message log, this is what comes up
2013:07:12 16:17:16 : tracked key 0000000000000238 of type struct _ADsc * __ptr64 not found : 1 : REQUIRE failed 2013:07:12 16:17:16 : e:\ps13\ps_14_win_x64_daily_retail\20130423.r.221\photoshop\main\photoshop\interfaces\UTr ackResourceImp.h : 137 : REQUIRE failed 2013:07:18 19:20:19 : tracked key 0000000000000100 of type struct _ADsc * __ptr64 not found : 1 : REQUIRE failed 2013:07:18 19:20:19 : e:\ps13\ps_14_win_x64_daily_retail\20130423.r.221\photoshop\main\photoshop\interfaces\UTr ackResourceImp.h : 137 : REQUIRE failed 2013:09:05 22:42:22 : ..\..\sources\USheetRendererCommands.cpp : 556 : REQUIRE failed 2013:09:16 17:22:13 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:16 17:22:20 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:21 16:19:20 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:21 16:19:37 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:21 16:25:58 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:21 16:28:01 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:34:51 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:35:19 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:35:22 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:35:30 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:37:55 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:37:59 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:38:04 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:38:08 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:38:22 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:43:33 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 17:13:25 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 17:13:42 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 17:13:59 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 17:14:16 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:25 22:04:18 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 16:58:46 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 17:46:04 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 17:47:08 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 17:47:32 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 17:54:05 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 17:54:12 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 17:54:33 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 17:57:02 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 18:05:03 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 18:05:40 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 18:05:49 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 20:31:17 :
..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 20:31:53 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed

How to set mozilla firefox homepage for all users in windows 7?

I want to set same homepage for all users in windows 7.

You can use a mozilla.cfg file in the Firefox program folder to lock prefs or specify new (default) values.
Place a local-settings.js file in the defaults\pref folder where also the channel-prefs.js file is located to specify using mozilla.cfg.
pref("general.config.filename", "mozilla.cfg");
These functions can be used in the mozilla.cfg file:
defaultPref(); // set new default value
pref(); // set pref, but allow changes in current session
lockPref(); // lock pref, disallow changes
See:
*http://kb.mozillazine.org/Locking_preferences
*http://mike.kaply.com/2012/03/16/customizing-firefox-autoconfig-files/

Need a solution to create BOM which will work for all Component category

Hi All,
I want to create BOM.
I am using LSMW (std batch input program RCSBI010).
After execution I came to know that it will not work for if Item category (STPO-POSTP) = 'D' (Document).
Can Anyone tell me Is there any way to create Material BOm which will work for all kinds of component(Item)Category.
Below are the diffnt types of Item Category:
ICt Item category text
A   Alloy Item
D   Document item
I   PM structure element
K   Class item
L   Stock item
M   Phantom material
N   Non-stock item
R   Variable-size item
T   Text item
X   Coded, Non-Stock Item

Dear Amit,
1.Is the production BOM containing all these item categories?
2.It seems there are some additonal item categories apart from standard item categories(A Alloy Item ,M Phantom material ,
X Coded, Non-Stock Item) for which you have to identify for which fields the value will be populated.
3.In my understanding it's possible through a BDC recording through T.code SHDB and befor this activity discuss the same with
your ABAP consultant as it involves some text items too.
check and revert back.
Regards
Mangalraj.S

ADE suddenly quit working for all users on my Vista computer. What should I do?

Please help.
Adobe Digital Editions quit working for all users on my Wndows Vista computer after I tried several times to install a book that wouldn't install. The book is one of three I recently purchased even though the other two installed with no problem. Other books were already installed.
I uninstalled and re-installed ADE with the latest version and tried again after clearing out the "My Digital Editions" folders by moving the contents elsewhere. The same problem occurs with all users on my computer.
The program runs showing no books or bookshelves despite contents in the "My Digital Editions" folder. If I try to "Add to Library," the program shuts down and shows nothing- not even an error message when re-run. Even though I'm only able to create a bookshelf, no bookshelf appers when the program is re-run.
I even tried de-authorizing and re-authorizing my computer.
What should I do?

HI
Whilst your Apple ID (presumably the @mac.com) may have been the original and been linked to @me.com at the MobileMe period and then to iCloud (@icloud.com) you need to keep to the same Apple ID through out (the iMessages server seems to treat them as different IDs to some extent).
In the Finder use the Go Menu > Go to Folder and enter ~/Library/Preferences
Find and Drag to the Trash com.apple.ids.service.com.apple.madrid.plist
On the iPhone remove those emails that are not the Apple ID in use.
On Restarting the Mac version you will have to re-enter the Apple ID.
If you then restart again you should get the pop ups to say what the iPhone is using (linking the iPhone number to the Apple ID)
Once you enable Text Forwarding on the iPhone then the Mac Version should generate and show you the Code to then enter in the iPhone's dialogue box to pair the devices.
If each Contact is turning red as you try to Send and reporting that the Contact is "Not Registered with iMessages" then you have a different issue.
This is caused by a partial login to the iMessages server and it seems it is one of those that only contacting Apple Support and saying you have an Account issue with the iMessages server from your Mac can it get sorted. (make sure you say it is an Account issue)
Of course it is the iPhone that is actually sending the SMS messages so it does need to have Carrier service at this point.
8:56 pm Monday; October 27, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Pin shortcuts to Taskbar and Start Menu for all users in Windows 7

How can i Pin shortcuts to Taskbar and Start Menu for All Users in Windows 7? Office 2007 Word, Excel and Outlook.

There are a few ways...
You can configure a default profile which will give you the ability to setup the Start Menu as you want it with the items pinned how you like. However, in my experience customizations done to the Taskbar are not maintained in a default profile.
So, one way to get around that would be to create a script and use the "Active Setup" hooks that are built into Windows 7 to achieve the desired results.
If you combine this script...
http://blogs.technet.com/deploymentguys/archive/2009/04/08/pin-items-to-the-start-menu-or-windows-7-taskbar-via-script.aspx
With Active Setup...
http://www.visualbasicscript.com/Active-Setup-Examples-m67461.aspx
You can get the results you want to get...
Pinned items on the Taskbar have two components, one is in the file system and the other is in the registry. You could also use GPO Preferences to add both components to a new profile and therby get similar results. I played around with this method a little and did get it to work also.
Mike N.

My apple ID password works for all of my devices but one. i only have one account and have changed the password several times but still cannot get it to work on my iPhone. any suggestions would be appreciated.

My apple ID password works for all of my devices but one. i only have one account and have changed the password several times but still cannot get it to work on my iPhone. any suggestions would be appreciated.

Thanks for the suggestion, Chris. I actually did not resolve the issue which is why i did not post an answer.
it turns out that my iphone seems to default to an incorrect User ID (it defaults to an @me account, which is not something that i have ever used).
even when i change the User ID in my settings for the iTunes store, it still appears when i attempt to get updates for my existing apps. however, it does seem to use the correct ID when i attempt to purchase new apps.
If someone actually had an answer to correct this, i would love to update my existing apps.
Thank you.

My ipad 1 for no apparent reason no longnet. Our home wireless connection is working for all other devices. Any clues?

My Ipad 1, for no apparent reason, no longer connects to the Internet. Our home wireless connection is working for all other devices.Any clues?

You can also try to reset your network settings on the iPad. Go to Setings>General>Reset>Reset Network Settings.
Good Luck!

My ipod classic got wet back in August.. it seemed to work fine for about a month, but recently is not working at all..screen appeared to get cloudy and then it just stopped working. thanks.

my ipod classic got wet back in August.. it seemed to work fine for about a month, but recently is not working at all..screen appeared to get cloudy and then it just stopped working. thanks.

Most likely, water damage.
You can try putting your iPod in a tupperware, half filled (maybe half inch) with rice grains, close the cover for about a week.
If you have done this, as soon as it got wet, higher chances of success, now looks like the water moisture is getting to the LCD screen.
Then you can always bring it to Apple Genius bar, for a an overhaul. (may cost you half the price of a new iPod classic.)

Firefox(20.0.1) is ignoring my proxy server for google searches from website and the search box. It works for all other search engines and chrome/safari.

firefox(20.0.1)
squid (port 3128) and dansguardian (port 8080) not running in transparent mode.
I am applying blacklists and a custom url regex to apply "safe=vss", this works for all browsers and all search engines except firefox using google search engine.
Search engines tested (bing, yahoo, norton, ask, amazon, avg, ebay) - all work.
Links from the search results are blocked by content filter, but search results still appear and google images are still shown. This does not happen in Chrome(23.0.1271.97), IE9(9.0.8), Opera(12.14) or Safari(5.1.7) with the same settings.
No log entry appears in Dansguardian access.log implying proxy settings are being ignored for just this combination.

I can't think of a reason that one particular webpage would behave differently from all the others, i.e., if you are starting at google.com and running a search using the form in the page, I'm not aware of any reason for Firefox to handle that specially just because it's Google.
Does it make a difference if you disable JavaScript when using Google? If that yields the results you expect, perhaps Google's XMLHttpRequest AJAX traffic is bypassing your filters?
The search bar has its own code, so someone would need to look at that to see whether/why it bypasses your proxy if the above hypothesis does not apply.

"Move Current Track Automation Data to Region" doesn't work for all

I have been using the 'Move Current Track Automation Data to Region' and while it works fine for some types of automation data like channel volume, pan and some plugin parameters, it doesn't work for all of them.
I haven't done exhaustive research into which parameters work and which don't, but most of the parameters for individual voices within Ultrabeat don't - which is annoying as that is what I was trying to use it for.
Any ideas about this, or workarounds?

OK, well an update on this in case anyone's interested.
With some further experimentation I have discovered that this problem did not exist in Logic 7 - ie you can move current track automation data for individual Ultrabeat voices to the region.
It's also possible to move automation data for individual Ultrabeat voices using 'Move All Track Automation Data to Region,' so I suppose this is a kind of workaround, though it can be annoying if you don't want to move all track automation data.
I'm now assuming this is a bug in Logic 8; is there any way to convert a Logic 8 project to work in Logic 7, as this along with the touch tracks bug is making working in Logic 8 very frustrating?

Query level formula is not working for all the amounts

Hi Friends,
In my production system I found new thing that in my query level I done some calculation (as per my requirement I done amount devide by 100 to get correct values)
It is working for all the amounts except 1or 2 amounts, im uploading same source file for all the amountsu2026 why it is happening like this u2026and is there any availability to change those 1 or 2 values at data base tables level or at any pleace (I hope in SAP it is may not possible)u2026can any body tell me why it is happening like this. u2026 because of this issue only my report is pending to sign off u2026.please can any body find the solution ASAP.
Regards,
VENKAT

Are they non decimal currencies?
If yes, create RKF1 on amount field excluding the currencies for which you are not getting currect values then in CKF or formula as RKF1 / 100. Similarrly create another RKF2 on amount only including the currencies which are excluded in RKF1, create a CKF or formula as RKF2/10000. Then created another formula wich adding CKF1 and CKF2.

Sound works for all programs in Windows 7 (64-bit) except iTunes (64-bit) which stopped working after months of working fine.

Similar Messages

Maybe you are looking for